Playstation 3 can't get on wifi with new Airport Express

Hi guys. I got the new Airport Express that was released a few days ago. My Mac and other iDevices all connect fine but for whatever reason my PS3 has issues resolving an IP address or whatever. At first I thought I'd solved it by turning off the only DHCP Reservation I had on (for my iMac) but the next day it's not connecting again.
Unfortunately I'm not much of a networking whiz.
I have it set to DHCP (not Static or PPoE) And I'm not sure what else to share but I'd really like to solve this.
It connected once or twice in attempts so I know neither the Airport Express Base Station nor the Ps3 is broken.
Just totally stumped here. :(

As an update, I noticed that the brief moments when my PS3 would attempt to connect, I would see another IP on my Airport Express Base Station. 10.0.1.3
So, wanting to try something out, I went into DHCP reservations on my AEBS and added a DHCP reservation for 10.0.1.3 and assigned my PS3's MAC address to it. I was able to connect instantly.
However, I've been connected briefly before, so only time will tell if it sticks. At this point I don't consider my situation resolved. Clearly my inability to connect has something to do with IP addresses and maybe the 'dynamic' one the PS3 sometimes gets assigned by the AEBS is something one of my other devices is already blocking or using?
I'm not a whiz at this stuff, so if anyone has any insights as to a good way to set up DHCP reservations so that everything works, I'm all ears.
Would it be wise to take the iMac, AppleTV, 2 iPads, and 2 iPhones and assign them ALL different DHCP reservations so that no one steps on anyone else's toes, so to speak?

Similar Messages

I am unable to join my existing wireless network with new AirPort Express

I am unable to join my existing wireless network with new AirPort Express.
I am using a DLink DI-524 Router, Windows 7 (64), and the AirPort Express.
AirPort Utility will not recognize the AEX wirelessly, it will only recognize it when it is connected by Ethernet. I can then configure the AEX and verify that the settings stick once disconnected and then reconnected. However, even after that, it will not recognize the AEX once disconnected from the Ethernet cable.
I followed the suggestions of several other threads on these forums. But I am unable to get the AEX to work.
Any suggestions? Thanks in advance.

Welcome to the discussion area!
It's almost always a security setting that causes problems when the Airport Express (AX) tries to join a third party wireless network. The AX usually does not "join" correctly and that's why you can't see it on your wireless network using AirPort Utility.
Using an ethernet cable is still the more reliable way to configure and adjust the AX, but if you are want to try to configure it using wireless, you must return the AX back to factory defaults as follows:
Power down the AX
Hold in the reset button +and keep holding it in+ as you plug the AX back in to power
Release the reset button after 10 seconds
When it is set to factory defaults, the AX broadcasts a wireless signal with a network name like "apple network xxxxxx" where the "x's" are either letters or numbers. You must look for this network by clicking on the fan shaped Airport icon at the top of the screen. If you don't see this network, then click Join Other Network to search that way. Unless you connect to this network, you will not be able to configure the AX using wireless.
Do you know the exact security type that your D-Link router is using? That is the key element in the process.
Open AirPort utility, click Manual Setup
Click the Base Station tab to establish a name for the AX, device password and adjust time zone settings
Click the Wireless tab
Wireless Mode....Join a wireless network
Wireless Network Name...must exactly match your D-Link wireless network name
Enable ethernet clients if you want the port to be active (your D-Link must be compatible with ProxySTA for this to work)
Wireless Security...exact setting of the D-Link network. WEP security causes a lot of issues. Try to use WPA/WPA2 Personal, which is far more secure.
Wireless Password...must match the D-Link network
Click the Music icon to enable AirTunes
Click Update to save settings
Any luck?

Can't get itunes to connect to airport express via air tunes

Hi,
I just bought and installed an airport express (for windows 7) everything is now connected but i can't get itunes to recognize my airport express via air tunes. I can see the multiple speakers in itunes, but when i click on it to connect to airport it just comes up with connecting, loads for about a minute then minimizes without connecting.
Has anyone else experienced this? How can i get this to work?
Message was edited by: Toddy85

You've probaby solved this by now, but if not... When upgrading itunes on a Vista or Windows 7 machine with Windows Firewall running for some reason Bonjour can't get through the firewall and thus Airplay does not work. Not good when all your Hi-fi's are connected via airport express!
I found to resolve the issue you have to install an older version of Bonjour. It won't work if you try to do this straight from Apple. So try this...
1. Firstly install and older version of itunes from the web (say version 10.1) Try www.oldapps.com
2. Then find the Bonjour file in program files
3. Cut and paste it to your desktop with its contents
4. Uninstall itunes and Bonjour via your control panel (the desktop file of Bonjour you moved will still be there).
5. Install your new version of itunes, say version 10.5, from the apple website.
6. Before opening it go to program files and cut the (newly installed) Bonjour file and paste it somewhere different to the desktop (you can't just delete it). It does not matter where you won't be needing it.
7. Now Cut and paste the old version of Bonjour you stuck on the desktop in Program files in place of the one you just moved.
8. Hey presto, Airplay, Windows firewall and your Airport Express' should all get on again.
Hope this works...
Jim

Can't do Factory Reset on New Airport Express

I just tried to install a new Airport Express today on my existing network (Wired to a port on my Airport Extreme). The new Airport Express shows up in the Airport Utility on my Macbook, but no matter what I do (manual or continue) it hangs for about a minute while saying "Reading the Airport Express configuration" and reports an error (-6753 "An error occurred while reading the configuration".
As a side note, which I can't seem to talk to the Airport Express, I have no problem getting to the Airport Extreme and doing whatever I want using the Airport Utility.
I decided to do a Factory Reset to get things back to the beginning. I followed the instructions (unplugged, held reset button, plugged back in, waited while holding the button). At no point did it flash green four times. Instead after about 10 seconds it started blinking yellow rapidly (sounds like the hard reset which is done with power on).
All the Airport Utility comes up with is the Name, IP Address, Version (a revision behind at 7.3.1), and Airport ID. It also shows the icon for the device with a yellow indicator.
Ultimately I'd like to use this device to get better network coverage upstairs -- possibly as a 5 GHz-only port, and then set the Airport Extreme to 2.4 GHz-only.
Any ideas why I can't do a factory reset?
About all the Airport Utility comes up with is the IP, MAC and firmware revision
All I know about this new APexpress is that it is one rev behind on Firmware (7.3.1) but it doesn't want to update.

It appears that the Factory Reset mode simply DOES NOT WORK.
By attaching directly to the APExpress via a ethernet cable (direct, no switch, so nothing else there), and by turning off WiFi on my MacBook, I was able to discover and connect to the APExpress. I changed from extend network to join network, and udpated, then was presented with a green LED. I thought things were working, so I removed the ethernet cable and tried connection by WiFI again, but still the APE would NOT show up.
So I did another direct connect with WiFi turned off. I turned the radio off in the APE as well and was able to connect to it and update the firmware to 7.3.2. Finally I turned the radio back on, and told it to form its own network.
In this mode I am back to getting the flashing yellow LED, and I still can't see the APextreme.
So it looks like either I have a bad APE, or there is some firmware bug between it and the Airport Utility. In any event, after I first connected to the APE via WiFi, fresh out of the box, I was never able to connect again in a way that would allow me to actually configure the product. I've only been able to do this via the ethernet connection and WiFi off.
And, of course, the Factory Reset simply DOES NOT WORK, so I have no way to put it back to the way it was when I first opened the box yesterday.
I'm hoping someone has a solution for this, but beginning to doubt it.

Issues Connecting to internet with new Airport Express

Running a Macbook pro 15" - 10.4.11
I just bought a brand new Airport Express a few days ago. I just recently got my internet service through Comcast restored and am eager to get a wireless network up so I can play Xbox Live again.
So issue is this: I plug the ethernet cable from the Cable modem into the airport, the light goes green. The computer is registering a strong signal, Network preferences says Airport is connected to my network. However, Safari keeps saying its not connected to the internet. When i run system diagnostics, I get a green light on Airport, Network settings, system settings, and ISP. But the light on Internet and Server stay red, and Diagnostics says it can't fix the problem and I need to contact my ISP. Comcast said they couldn't help, my connection was fine and they even refreshed it to no avail. When I plug my Ethernet cable directly into my Macbook pro, I get on the 'net no problem. I'm dumbfounded.
I'd appreciate any sage wisdom offered. Thanks!
p.s: Also, when I run a connection test on Xbox 360, it picks up my network, connects quickly, ISP confirms, but ultimately fails at DNS Server. Hmm.

bl4ckr4bbit, Welcome to the discussion area!
Most cable modems require that you power them off when you switch the Ethernet connection from one device to another. Until you reset the modem it will not communicate with the new device. When the modem is powered on it detects the new device and starts talking to it.
Some cable modems have a reset button on the back for this reset.
Some cable modems have a small internal battery which must be removed for this reset to occur.
Sometimes the cable modems must be unplugged several hours or even overnight to allow equipment back at the ISP to reset.
Did you power off the cable modem when switching the Ethernet connection?

Slingbox Solo no longer working with new Airport Express router

Help! I'm at the end of my tether trying to get my Slingbox to communicate with the new Airport Express I've just bought. Here's the deal...Obviously, as AEXP only has one Ethernet Port (under advisement) I had to go and buy a 5 port Ethernet switch. Cable modem connects to 1 port of the switch. AEXP connects to another port. Slingbox connects to 3rd port. Network light on Slingbox flashes incessantly and Slingplayer software tells me to makes sure the "Network Router the Slingbox is connected to has the correct Port Forwarding settings."
I have tried (via google) but cannot make sense of this. There should be no firewall obstacles as i am using MAC filtering and have added the MAC address of the slingbox to the AEXP settings. I know that Slingbox does work as it worked fine before with my Belkin router. Please can anyone help? I have called slingbox for ages and they are unable to help. Here's hoping someone here has brains and the patience i don't have! Kind Regards.

identitytheft, Welcome to the discussion area!
Sorry but you need to replace the Ethernet switch with a router which has more than one Ethernet port.
Since the AirPort Express (AX) only has a single Ethernet port it can not properly share an IP address to Ethernet clients.

Help with new airport express on older MAC

How can I use a new airport express on an older MAC? I am not able to install the new airport utility software because the MAC software is too old. Can I install the airport software on my newer PC. Will the older MAC be able to fist it and use it with AirPlay?

You can run Airport Express on v10.4 or later.
http://store.apple.com/us/product/MB321LL/A/AirPort-Express-AirTunes?mco=MTY3ODQ 5OTY
I use mine with two older laptops, one running Tiger, one running Leopard, as well as newer Macs running Snow Leopard.
Try installing the software from the CD. If there's a problem, you should see a dialog box.
http://manuals.info.apple.com/en_US/AirPort_Express_Setup_Guide.pdf

Older Airport Extreme with new Airport Express

I have a new Airport Express and an older Airport Extreme (I think 1rst gen). I have been using the Extreme for a few years now and just got the express to help me extend the extreme. The Extreme's signal is very weak in some parts of my house. I cannot hook the two together via ethernet. Needs to be wireless. What's the best method? I only use the wi-fi for internet access and tv (netflix, HBOGO, etc). I do not share printers or hard drives. I'm wondering if the new express is better (range) than my older extreme? Should I use the express as my main base station?

Your Extreme should still provide better overall range over the 2nd gen 802.11n AirPort Express Base Station, so I would still recommend that you leave the Extreme as your "main" router.
You will want to use the following instructions to extend the wireless network from this Apple Support article.
The key to success if extending the Extreme is to place the Express within a 25+ dB SNR range of the Extreme as it can only repeat the signal with the same bandwidth that it receives it. If the signal is very weak the Express may not even be able to extend it at all.
Check out the following AirPort User tip for details on optimal base station placement. Please post back your results.

Can not get on line with new notebook

can not get on line. *we have verizon, *bought new router to see if that was problem. *bought airport express to see if that would help, *my son, bs in computer security, has spent days starting over redoing, *we used his dell notebook to go to apple site (what's wrong with that picture?) it did work for awhile, wanted me to start time machine, but would go on line thru safari? says ethernet cables not connected - he tried 2 different ones. i'm at the point of taking this piece of #$@% back to best buy.

Whoa, slow down. It's hard to understand exactly what's going on when you've explained your issue so unclearly.
Please describe exactly what network setup you have at the moment - you have Verizon DSL? What router are you using, are you wired or wireless, how is the Macbook connected to the network, how are your other computer(s) connected to the network? Let's take it step by step and I'm sure we can find out what's going on.
Matt

AirPort Utility can't find Netgear router OR new AirPort Express

Hello,
I couldn't find my situation fully addressed in older posts, so I'm posting one myself.
I am trying to EXTEND my current network with a newly purchased AirPort Express. My equipment is as follows:
Comcast modem connected via ethernet cable to...
Netgear Nighthawk AC1900 R7000 dual-band router
One three-year-old Mac Mini running Lion
One newer MacBook Pro running Mavericks
Two iPhone 4S, latest software updated as of Nov. 2014
Two-year-old iPad, latest software updated as of Nov. 2014
Newly purchased AirPort Express as of Nov. 2014
We have a large house with an office at the extreme end resulting in a week signal, so I need to extend my network. The Netgear router sends a strong signal otherwise, and ALL devices are working properly and are fully connected to the WIFI network.
So here is the problem:
I've tried many, many times to connect the APE using AP Utility with only two successful connections, but these connections were to "Join Existing Network" not to extend that network, but I selected this option as it seemed closest to what I want to do since "extension" of network was not an option. Then I see that I can edit the APE within AP Utility. I've done so, resetting the unit as a network extender, and the two times I tried this I sat waiting for five minutes for the thing to update only to get an error message. At this junction I could do nothing but remove the APE in AP Utility by "forgetting" it. No other options were available that I could see.
Now, the two times I've done the above, were two times within 20+ attempts to get AirPort Utility to even see the darn thing. I've tried placing the APE near the Netgear router, moderately close (other side of room) and even at the far end of the house, and neither the APE or the Netgear router were ever found in the AP Utility save the two incidences mentioned above. I've scoured the net, rechecked all connections and performed all troubleshooting procedures I can find to no avail. All I get is a flashing amber light and no connection
A: Why won't AirPort Utility find my Netgear Router?
B: Why won't AirPort utility find my AirPort Express?
C: Why, on the two occasions the AP Utility did find the APE, did it not give me the option anywhere to set it up as an EXTENDER to the current network?
D: Is there any other way to add the APE to my network as desired without using AP Utility? (I do have the Negear Genie app, but I don't see options for adding a device for network extension so far)
I'm at wits end. Can anyone help?
Oh, and I've tried using AP Utility on both Macs listed above with the same results.
Thanks for your help!

A: Why won't AirPort Utility find my Netgear Router?
AirPort Utility works only with an Apple router, as does the utility for a Netgear work only with a Netgear router.
B: Why won't AirPort utility find my AirPort Express?
Any of 3-4 common reasons. We'll have to work on troubleshooting that.
C: Why, on the two occasions the AP Utility did find the APE, did it not give me the option anywhere to set it up as an EXTENDER to the current network?
Apple designed the wireless "extend" feature on their routers to only work with other Apple routers.
D: Is there any other way to add the APE to my network as desired without using AP Utility?
No
Not sure how you want to proceed at this point. It might be possible to use the AirPort Express to extend the Netgear network if you connect it using a permanent, wired Ethernet cable connection back to the Netgear router.
If you cannot run the Ethernet cable, your best bet by far is to use another Netgear extender or repeater, which would likely be compatible with your Netgear router.

How can I get my time capsule and airport express (as a network extension) working properly together?

Hi,
I bought a time capsule a while back and connected it to my modem, and it seems to be backing up my hard drives but I can't tell if I'm getting my wireless signal from my time capsule or from the modem itself, which used to before I bought the time capsule.
It's bugging me because I'm trying to get my airport express to work as an extension to my network, and airport utility half the time can't pick up the express. I heard that it will only work of the time capsule is working as the base station,and I'm not 100% sure this is the case.
Also, how far can the airport express be from my time capsule for it to be picked up? I tried resetting it which helped to start with, but when I was setting it up to extend my network it just told me that there was an error and to try again, which I did with the same result.
Any advice would be much appreciated!
Cheers

Always do setups with ethernet.. setting up wireless via wireless is like cutting off the branch you are sitting on.
You do not need the TC in the network to do the setup.
Plug it by itself into the computer. Same with AE. But do each separately.
Give the TC a different wireless name.. like TC.. then you will know the TC wireless is separate and different to the main modem router. Simply allow it to be extended.
Plug it back into the main modem.
Now do the AE.. set it to extend the wireless of the TC.
When you do this check the signal level. The airport utility v5 has a full diagnostic of wireless client levels.. do not use v6 utility.. it is useless. The AE is placed somewhere in between the TC and the clients you want to connect.. it has to get decent signal itself to extend wireless. And there is no way we can tell you how far apart.. pick the half way point.. around about and suck and see. If it doesn't work move closer to the TC.
Count the walls the signal is going through.. about 15% signal loss for each one.. if angle is acute 20%.. floors are worse.. they might be 20-25%..

Can't get to manual setup in Airport Express

Just installed a Linksys e2000 router, replaced Linksys WRT54g router. Airport Express worked fine on old router. I'm trying to connect to an existing wireless network (Linksys e2000). I open Airport Utility (v5.5.1) and it immediately tries to detect a network, returns a message saying Airport Utility was unable to find any Airport wireless devices. I cannot get to the manual setup, they are ghosted out. Using Airfoil 2.7.8.0. Light keeps flashing amber on the Airport Express. How can I get to the manual setup so I can changes settings for the the new router?

I wanted to use my Linksys e2000 as the router, not the Apple Express. I fixed this by uninstalling the Airport software and re-installing it. On the Linksys e2000 router, the security must be set to WPA/WPA2 Mixed Mode or other laptops won't be able to connect, found this out by trying to connect another laptop that required some type of security in order to join a wireless network. Here's what I did:
Remove existing Airport software first.
Set security settings in Linksys e2000.
Reset the Airport Express.
Install the Airport software (I did this from CD provided when I bought it a year ago). System will prompt you to update the software from the Apple site, let it update.
Open Airport Utilities and select wireless network to join, you'll need the password for the wireless network.
This worked for me and now both laptops and Express are working.

Safari not working with new airport express

i just hooked up my airport express and safari does not seem to be working on 2 iPhone 4Gs and on 1 macbook pro.
seems fine on 1 original iPad and 1 hardwired iMac.
any suggestions?

Where did you get the firmware, and what specifically was it for? You need to know this before downloading or installing anything.
Mulder

Laptop Stolen, now How can I get Ipod working with new computer/disable old

My laptop with my itunes was stolen. I still have my IPOD 30GB.....
I have a new computer, and I think I can download Itunes to it and hook up the ipod and it will be able to load ipod content to the new computer???
Also I am worried, what about the old computer, do i need to DeAuthorize it? How would I do that since I don't have it in my possession?
Thanks for any help!!!!

*what about the old computer, do i need to DeAuthorize it? How would I do that since I don't have it in my possession?*
You can't deauthorise a computer you no longer have access to on it's own. However once you reach the limit of 5 authorisations you have the option once a year to deauthorise them all in one go and start over: About iTunes Music Store Authorisation and Deauthorisation
*I have a new computer, and I think I can download Itunes to it and hook up the ipod and it will be able to load ipod content to the new computer???*
If your iPod is set to update automatically you need to take care connecting to an empty iTunes. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
iRepo Mac and Windows
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPodCopy Mac and Windows
There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

My system can not connect with the Airport Express while the signal is very good?

Neither my phone nor my desktop (windows 7) can not make a connection with the Airport Express. The signal keeps flashing amber.
Several specialists have checked but can not solve this problem. Any ideas?

I am in exactly the same boat...

Playstation 3 can't get on wifi with new Airport Express

Similar Messages

Maybe you are looking for