Playstation error

I keep getting an error every time I try to log in to our psn account (ps4) which says Playstation error nw-31456-9

@hiptechboy: yes I get disconnected from playing online with both wired and wireless connection. I also have MAC addressing set up I just erased my ps3 mac for security purposes (sorry), the signal strength for my ps3 is *runs over to the ps3 runs back* is 100%
@dibbler: Yes these erros occur even when I'm hard wired in... and I I'm under the impression that I have the highest availilbe firmware for my router I'm on firmware v1.0.05 for my wrt120n... Question: don't I need UPnP to be enabled for PS3 to work? also I couldn't find Block Anonymous Internet Request under the security tab i checked under all the tabs.... Here's a picture: btw I didn't choose the firewall setting... I did the port triggering 53 to 10080 through the port triggering tab, is that right? I also reduced the mtu to 1365 as you asked... I'll edit this post after i go and try it out right now... Thank you all so far for the help!

Similar Messages

Playstation 3 (PS3) error 80029564

Hello, I've been having a problem downloading games and game updates on my new Playstation 3. I've been researching the problem from the Sony side, but as far as I know it could be a problem from the Verizon side.
The error number 80029564 comes up while installing, and tells me that the data is corrupt. In each case, the error comes up at 14% installed.
My Gear:
I have a brand new PS3 that I just purchased a few days ago.
I use Verizon FiOS for internet. I have a combo modem/router model no. MI424WR-GEN2, hardware version E, firmware version 20.19.8.
What triggers the error:
I usually get the 80029564 error when I try to download a game or install an update.
For example:
Little Big Planet 2 - finally did work on about the 4th try.
Rachet & Clank: All 4 One - I've tried several times, and it always gives me the 80029564 error.
Also, we bought Gran Turismo 5. It has 21 updates. It never makes it past update 10.
Attempted Solutions (that failed):
Some things I've tried in my effort to fix the problem:
- switched from wi-fi to ethernet connection
- safe mode - rebuild database
- set firewall to Low
- switched DNS to Google IPs
- verified that uPnP is enabled on the PS3 and the router
- set up DMZ for PS3 IP
Still, problem not fixed. This is very frustrating, we've spent more time trying to get games to work than actually playing anything.
I'm hoping there may be other FiOS customers who have tackled this problem and can help me out with a solution!

brianh71 wrote:
Thanks for the information. I don't have a solution yet. I thought about trying the premium tech support, but the links I've found to it are broken.
The link about the NAT table issue is interesting. It at least gives me the idea that I should check out the router log for errors that might give me a clue.
I've thought about just calling Verizon and asking them to send someone out, but I'm more than a bit concerned about what kind of bill I might get from Verizon for that. Plus, I thought about trying the premium tech support, but the links I've found to it are broken.
I don't know how to resole your issue, since I have no PS3 myself, but the link, at least, I can help with: http://www22.verizon.com/home/expertcare/
Also, I can almost guarantee that a truckroll to fix a gaming system issue would be expensive, and potentially futile. It is unlikely that a field tech would be familiar enough with the PS3 to be of real help. (Though you might get lucky. It's just outside of their normal scope of support.)
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Error code NW-31246-6 - Playstation won't connect to internet

I was playing GTA Online when my PS4 randomly disconnected from the internet, normally I have perfect internet so I find no reason that distance from the router should be a problem. All my other devices connect fine to the internet such as mobile phones, TV's, computers etc. Whenever I try to reconnect to the network, the SSID does not appear. I have tried setting up the connection manually, but I do not know the Primary DNS and there are no clear descriptions of how to do it online. Resetting the router, obviously, did nothing. The error codes I receive are: NW-31246-6 and NW-31291-6I have looked these codes up and there are no proper resolutions to them. P.S. Is there any way to play Blu-Ray discs without having to connect to the internet to turn a setting on, I have been using my Playstation 3 instead but it is very annoying to deal with a load of new wires when I already have so many.

Wifi frequency is terrible on PS4. Use a cat6 cable for a more stable experience.

Z3c Playstation App not signing in... error code (0x82E01003)

I'm getting this message when trying to sign into PSN via the Playstation App
An error has occurred.
(0x82E01003)
and also this error with the PS4 remote play app
An error has occurred.
(C-80F80A01)
Please help, i bought this phone for remote play!!
thanks

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I checked the IMEI you have registered with us and from what i can see, you have unlocked the bootloader in your phone? As i understand it, these services will not work without the DRM-keys that are permanently deleted when you unlock the bootloader.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Playstation 3 Error 8002D23

Hello Everyone
Over the past week i have been getting this error on my Playstation 3 which has been disconnecting me from the Playstation Network once per night. This error is caused by my connection but i can't find anything wrong with it. This error says that a disconnection has occured because my connection is either slow or busy. Here are the details of my connection. (Playstation 3 uses ethernet cable and test was done with ethernet cable too)
I want to post my event log as well but is it safe to do that?
[Just add as well that the hub itself is not disconnecting]

Firstly - I'm not a PS3 user, but I can't see anything wrong with those stats. In fact I'd love to get anywhere near 67 days!
Secondly - So you still get this error message over a wired (ethernet) connection?
Thirdly - You can send me a PM with the event log if you want. Then I'll see if there's anything that shouldn't be given out on an open forum.
-+-No longer a forum member-+-

PlayStation 3 Multiplayer Network Error

I'm attempting to connect Uncharted 3 online via my PlayStation 3 but keep receiving a network error during the connection process.
I have contacted PlayStation support and following some troubleshooting, including port forwarding and putting the PS3 into a DMZ, the network error continues to occur and as such PS support have advised me to contact my ISP for further assistance.
Anyone have any ideas what it could be and what I can do to resolve the issue?
Many thanks,
Sion.

As no replies so far thought I might try and help.:
If i remeber from my setting up other games you need NAT 2 or open - if your system settings show NAT type 3 there will be an issue. Primary step here is to ensure you have upnp enabled. If not - this needs doing in your router (as you have tried DMZ I presume you have done this).
Have you played online with other games and this is the first issue? Are you using ports as follows:
TCP Ports: 10050, 10051, 10040 - 10060
UDP Ports: 50000 - 60000
Have you specified a DNS server (primary and secondary): try googles rather than SKY's (just a curve ball suggestion that)
Attached is a link for putting PS3 into DMZ but you may have also done this as specified: http://www.ign.com/boards/threads/attn-uncharted-3-players-and-anybody-that-wants-to-improve-their-ps3-connection-dmz-instructions.203844727/
Note that from the above link one respondee mentioned he had an IP phone connected that mucked up his ps3 settings - needed disconnecting when playing - have alook at your network for anything that might also impact.
Good luck

Please Help: Playstation Banned Error Code WS-37338-4

Hi I tried signing into the PSN and got the error code WS-37338-4 saying that "Access to PSN from this PS4 has been banned or temporarily suspended." Can someone please help? I don't play online and literally use my login to update my squads on fifa so I have no idea how I got banned.

ReesFitz92 wrote:
Check your emails. I know they've been banning a number of accounts due to buying coins.They are also clamping down on game sharing particularly the suckers buying cheap digital games off Ebay.

Apple BT keyboard & mouse won't pair with PlayStation 3.

I have an Apple Bluetooth keyboard and mouse (mouse is the older single-button BT model). Neither one will pair with the PS3, with new BT keyboard/mouse support via 1.6 firmware update. When I go to register BT mouse/keyboard it sees them fine, sees their BT names, but then gets an error when trying to pair, on each device.
Normally I wouldn't post this in an Apple forum, but since they are Apple devices and they pair just fine with Windows PCs, I'm wondering if there's some way I need to force pairing mode or something to get this to work.
Any ideas offhand how to fix this?
Anyone with a PlayStation 3 gets this working with Apple keyboard/mouse, please post how you did it. I don't want to buy a separate BT keyboard and mouse kit for the PS3 when I already have these in great condition, seeing little use.

Sorry I missed this and didn't respond. If you can afford both, keep both. Even at this early stage, my preference overall, especially for the long term, is by quite some bit, the PS3 and it's games, many now and lots more in the coming year. Also, I think Blu-ray will eventually "win" the HD movie format battle, meaning some studios besides Sony Pictures may drop Blu-ray exclusive releases and release on both formats, and Universal will step off HD DVD exclusive releases and release on both formats, but Blu-ray eventually be the only format on which you can get everything. But for the short-term future you will have more game variety for your 360, so you might want to wait and save for the PS3, or trade at a later date if you can still get good value out of the trade.
Since this reply is ex post facto, it seems like the PS3 blew out the European and Australian launches. Quite a bit different than console's initial reception here in the States.

I have a Motorola SB6141 modem that is connected to a time capsule. I am unable to connect to the internet on my laptop and playstation 3

Ive just switched to a "Motorola SURFboard eXtreme Cable Modem" which is connected to a time capsule.
I am unable to connect to my internet via. wifi on my Playstation.
I have already tried many different attempts to connect to the internet. I have tried to directly connect to the internet using an ethernet cable as well as restarting my mac laptop and playstation. I am only able to connect to the internet on my main computer.
Please help?
I tried being the most descriptive I could

I am only able to connect to the internet on my main computer.
What IP does your main computer get.. ?? Post a screenshot if you can as it helps to see the details.
When you open the airport utility on the main computer.. click on the TC what errors does it show?
They will list in the summary.
What mode is the TC in? If the setup went wrong it might be bridged when it should be in router mode..
Remember any time to change things around with cable modems you MUST shut down the modem as well.. it cannot change the MAC address of the first item easily so need to be off.. a few minutes at least.. sometimes up to 20min or longer. Make sure the TC captures the public IP on the wan interface.. which is the only way this will work with a pure modem.
The most recent TC can still have issues.. new AC version TC and AE have the Max amount of issues with SB6121 and 6141.. there seems to be some ethernet issue between them..
What model TC do you have??
You can slow the LAN port down or specify the actual speed in the Gen1-4.

Connecting a playstation 3 to airport extreme

I'm new to the whole wireless thing so please bear with me. I have a number of questions:
Firstly, the only reason why I did go wireless was for my playstation 3 and now I am having problems connecting it the airport extreme. Everytime I go on automatic on the PS3, it does not recognize the airport extreme. What do I need to do? It's also asking me for a SSID?
Secondly, how safe is this? Heard some stories of neighbors leaching on internet connection and what not. If so, whats the best way to prevent this?
Finally, how do i open ports for port forwarding? I used to use a netgear router and all I to do was enter the router ID and then just enter the password and username.
Thanks in advance
20' intel imac Mac OS X (10.4.6) 60GB video ipod (black)

If you are using encryption, make sure the N is set to WPA. WEP will not work. On the PS3, set it to WPA, type in the passphrase and it should connect. I have a PS3 hooked up this way.
For your SSID, make sure the N is broadcasting the SSID and it is not "hidden from view". Many devices like seeing the SSID in the clear. I know, this is not considered the most secure way of doing this, but with strong encryption enabled and MAC filtering, you should be OK. I live in a neighborhood with a number of other wireless networks and have never had a problem with this setup.
Port forwarding is another issue. I do not remember seeing this feature in the N. My setup still uses the Netgear router and the N is plugged into it. The router does the NAT translation, error logging, firewall duties and port forwarding, the N handles everything else. My daughter still plays her online games just fine.
Jeff

Final Cut Pro 7 - Share - Blu-ray - ERROR

Fresh install of OS and FCS.
Ran a quick test to make sure this would work:
File - Share - Blu-ray
Burned to disc then and there, and it was successful on an eleven second portion of the clip with an in and out point on the timeline.
The result was a beautiful Blu-ray quality 11 second clip recorded onto a DVD-RW, and it played back fine on a PS3. (AVCHD)
Extended the in and out point on the same clip in the same timeline in order to do a 20 minute version of the same thing. 2.5 hours later, it ejected my blank DVD I had already inserted, and asked me for a Dual Layer. I put one in, and it ejected that one, too. I kept trying different blank media and eventually it tells me:
There was an error burning your disc.
Operation could not be completed. (DSPPublishing error -1006.)
Hit "Try Again" and after a few minutes it says again,
Please insert the dual layer media to burn the
disc "name-Blu-ray".
Seems to be an endless loop. It's reporting the final size will be only 1.6GB, so I don't know why it's asking for a DL disc. I spoke to Apple today and they told me this feature was not compatible with DL media at all anyway.
If anyone can help...

Update and WORKAROUND:
I have been experimenting and here's what I've learned:
I'm thinking the new "Create Disc" is the cause. The encoded files generated by FCP7 and Compressor 3.5 are fine. One whacky theory of mine is the programmers made a typo where if you encode a file like this over 1GB the burn fails. I don't know, I'm just saying, it's probably something simple like that.
I spoke to Apple, too. First I had someone tell me it failed because I tried a clip larger than 25 minutes, so I tried 20, and it failed, too, the same way. (I also previously encoded a 3.5 minute clip and it was excellent.) This person also told me Dual Layer was not supported at all. He was completely wrong.
I called back and this time it was a guy named Bob. If you ever call and speak to him, just do him a favor and hang up on yourself and save him the trouble. He won't let you speak to tell him the problem, and even if you are calm and try he's the type to tell you to "calm down, sir." He literally told me "there is no Blu-ray feature" in the new FCS. I merely asked if he had seen the new Compressor and he told me he knew everything, and asked me to have a nice day before hanging up on me. I know he's an anomaly at Apple.
I called back and spoke to someone else, and they gave me this link:
http://www.kenstone.net/fcphomepage/burn_br_mac_superdrivestone.html
After I read it I thought, "that's exactly what I did!" But it doesn't work and that's why I'm calling. (Even that article reports odd bugs.)
I called again, just because I know this needs to be fixed. Finally I spoke to someone who passed it along, and they are going to look into it. Get this - he checked the FCS manuals and discovered that it is indeed a feature that should work. Maybe they will name the patch after me.
So I also found a solution in the meantime. I've read hints here and there, but this is what has just worked for me and I wanted to verify before posting and sharing it:
Do the encode with Share in FCP7 or Compressor 3.5. Screw what anyone tells you about "maximum size" or 25 minutes or even what Compressor tells you regarding the number of minutes of footage the disc will hold. It's wrong. And, it will support Dual Layer discs. Go by the file size in the summary, and that's it. (I'm talking about AVCHD here, nothing else. It's the Blu-ray setting and you can change it to AVCHD to burn on a DVD-5 or DVD-9, in the manual it says "red laser media.")
If you want to burn to a DVD-5 stay under around 4GB for your video, but you can experiment with the details. You have a minimum of 5Mbps and a max of 17Mbps in a VBR. Seriously, use whatever you want, as long as it will fit on the media. This is also about H.264, not MPEG-2.
Export to files, and make sure you do NOT burn from FCP7 or Compressor 3.5, because that will cause the problem. It will even completely ruin your blank media, but you may think it's still blank because they will be detected as blank media, even in other systems. But they cannot be used, ever again, merely for trying with "Create Disc."
In the end you will have two files:
movie.264
movie.ac3
If you have two files with those extensions and they don't have the exact same file name, rename them, but keep the extensions.
I used Toast 9. Blu-ray Video option. Add - locate the two clips with the same names with .264 and .ac3. They go in, deal with the ugly menus, but make sure you do this:
In the Encoding settings:
Custom
MPEG-4 AVC
Average Bit Rate: to whatever you used in Compressor or FCP7.
Maximum Bit Rate: may as well set it to 17 (we're trying not to re-encode the files)
Motion Est - Best - check the Half-PEL box
Reencoding - Never (that might make the above a waste, but it only took a couple seconds so stop complaining.) Set the rest to the same settings in the same way.
Choose your blank media and burn it, and few seconds later you can slap it into your PS3 and watch the creamy smooth silky beautiful encode right there.
I read somewhere it retains the FCP color settings and that's probably why doing it this way is a thousand times better than using Toast to encode (which skips really bad in my tests). I've also tried Encore and it was ugly and looked like it skipped frames.
Anyway, "Create Disc" may not work right now, but the encodes are amazing. I hope this helps others from banging their heads against the wall, and from calling Bob. I just burned a 2 hour movie onto a DVD and played it back on a PS3!
For further reading, here are some interesting links I found:
http://www.shedworx.com/revolverhdmac-faq
- Talks about Apple's support of H.264 "High Profile" - they type needed for AVCHD and Blu-ray movies.
http://manuals.playstation.net/document/en/ps3/current/video/filetypes.html
- PS3 supported file types.
http://blogs.adobe.com/davtechtable/2008/03/updated_march_2008_workingwi.html
- Interesting times of various encodes on different systems. For Encore, but comparable to Compressor for time differences.
If this has helped you, Apple owes me some money, and you're welcome.

Java pms - playstation media server not starting correctly/at all

dont' know if it's the right forum, but i guess since it's a multimedia application, i thought i go best here.
i just downloaded and installed the playstation media server from the AUR and installation went fine and all deps are installed.
then i wanted to start that thing, but it didn't quite work like i expectet. i started it from dmenu and it popped up a window without anyting in it. so tried to start it from the console to see the output. so here it is:
[main] TRACE 01:12:44.913 Starting Java PS3 Media Server v1.10.5
[main] TRACE 01:12:44.914 by shagrath / 2008-2009
[main] TRACE 01:12:44.915 http://ps3mediaserver.blogspot.com
[main] TRACE 01:12:44.915 http://code.google.com/p/ps3mediaserver
[main] TRACE 01:12:44.915
[main] TRACE 01:12:44.915 Java 1.6.0_0-Sun Microsystems Inc.
[main] TRACE 01:12:44.916 OS Linux i386 2.6.32-ARCH
[main] TRACE 01:12:44.916 Encoding: UTF-8
[main] TRACE 01:12:44.931 Temp folder: /tmp/javaps3media
[main] TRACE 01:12:44.957 Registering transcoding engine FFmpeg Audio
[main] TRACE 01:12:44.982 Registering transcoding engine MEncoder
[main] TRACE 01:12:44.983 Registering transcoding engine MPlayer Audio
[main] TRACE 01:12:44.983 Registering transcoding engine MEncoder Web
[main] TRACE 01:12:44.984 Registering transcoding engine MPlayer Video Dump
[main] TRACE 01:12:44.984 Registering transcoding engine MPlayer Web
[main] TRACE 01:12:44.997 Registering transcoding engine TsMuxer
[main] TRACE 01:12:44.998 Registering transcoding engine Audio High Fidelity
[main] TRACE 01:12:44.998 Registering transcoding engine VideoLan Audio Streaming
[main] TRACE 01:12:44.998 Registering transcoding engine VideoLan Video Streaming
[main] TRACE 01:12:44.999 Registering transcoding engine Raws Thumbnailer
[main] TRACE 01:12:45.274 Scanning network interface eth0 / eth0
[main] TRACE 01:12:45.274 Using address /192.168.178.29 found on network interface: name:eth0 (eth0) index: 2 addresses: /192.168.178.29;
[main] TRACE 01:12:45.275 Created socket: /192.168.178.29:5001
[main] TRACE 01:12:45.280 FATAL ERROR : Unable to bind on port: 5001 cause: Address already in use
[main] TRACE 01:12:45.280 Maybe another process is running or hostname is wrong...
[main] TRACE 01:12:45.281 Some serious errors occurs...
and here is a link to the output and the window
as you can see, you can see nothing. i tried to mess around with folder/file permissions in opt/pms like it was suggested in the comments from the aur page - didn't change anything.
so i tried the tar.gz from the official webpage - but with the same result.
the problem in the console output, pms not being able to bind on port, isn't even the first problem, since i can't change the port without a GUI. so i wonder how to bring it up correctly.
i'm using arch x32 with kernel 2.6.32 and currently openjdk6 1.6.2-1
could it be some problem with the java vm or some wrong versioning? or am i missing some other things? if anyone could come up with help and/or solution, i'd be very happy ^^;
Last edited by Askr (2010-01-17 00:23:53)

wbeyda wrote:has anyone ever got Mediatomb to play Hi-Def? I can never play Blu-Ray rips in MKV format with MediaTomb.
Although it is somewhat off-topic, I have exactly the same question.
I asked for mencoder or ffmpeg settings in the doom9-forum and the lead x264-dev just pointed me towards pms. So I guess I'll be trying pms out (although I'm quite satisfied with mediatomb-svn, except for the HD-stuff...
Zl.

PlayStation 3 wont load games, screen goes black

Help!
I have a playstation3 (a fat one) and it won't play any games.
It was playing games about a week ago but it was very slow. Then the other day it stopped playing them all together.
Blu-Ray dvds work fine. As does cd's.
I tried safe mode, restored file system. Restored the whole PlayStation. I wiped everything and it still didn't work.
So I bought a new hard drive and installed it with new software I downloaded.
The home screen works and it will recognise the disc but when I press start it has a loading timer in the corner for a minute then just goes black. I've spent $80 on a new hard drive and I'm frustrated it's not working. Any ideas?
Help me!

AshD2108 wrote:
Help!
I have a playstation3 (a fat one) and it won't play any games.
It was playing games about a week ago but it was very slow. Then the other day it stopped playing them all together.
Blu-Ray dvds work fine. As does cd's.
I tried safe mode, restored file system. Restored the whole PlayStation. I wiped everything and it still didn't work.
So I bought a new hard drive and installed it with new software I downloaded.
The home screen works and it will recognise the disc but when I press start it has a loading timer in the corner for a minute then just goes black. I've spent $80 on a new hard drive and I'm frustrated it's not working. Any ideas?
Help me!Sounds like your ps3 has sadly passed. errors like this happen to the older machines, if it was just you disc based games that were not working id say it was the disc drive but as its all your games its most likely a gpu issue. i would avoid spending more money on repairs and invest in a new unit.

Playstation 3 - connection problems with BEFW11S4

I am having trouble connecting my Playstation 3 to the internet via my BEFW11S4 wireless router.
The PS3 scans and finds the router ok (signal strength is good), I enter the SSID, WLAN security setting is WPA-PSK (TKIP), I enter the WPA key and select 'Easy' in the Address settings page.
The PS3 comes back with the following error message
A connection to the access point could not be established. Check the security settings for the wireless LAN (8013013E)
Does anybody have any idea what I might be doing wrong?
I have a laptop and desktop which connect via this router with no problems.
Someone suggested switching off the router security - might this help? - how would I do that exactly?
Any help would be gratefully received. Thanks.
Message Edited by BennyBoy on 04-01-200705:46 AM

Thanks for the replies....
I made two adjustments - turned off the router security and manually entered an IP address in the PS3 (as advised on another forum) - not sure which of these made a difference (I'm sure through trial and error I could work it out) but it seems to be working ok now.
However the connection speed seems very slow - to download the latest system update took over an hour - it shouldn't be this slow should it?
Any advice on how to achieve a faster speed?

Connecting Playstation 3

I have a WRT54G wireless router that I have been using for sometime without problems. I regularly have 2 to 3 PC's connected with a wireless connection. I just purchased a PS3. When I try to log on with the PS3 it cannot gain access if one of the PC's is active. If the one of the PC's is inactive it loses its wireless connection when the PS3 logs on. ThePS3 works great if no other computer is on the network. When the PS3 is active all other PC's can not gain access and may generate an error "IP address taken".

Try this site out
http://www.ps3experts.com/forum/-tutorial-setup-your-playstation-3-with-a-linksys-router-t18.html
You have to manually assign your PS3 a Static IP address that is different from your machines

Playstation error

Similar Messages

Maybe you are looking for