PLD document is more than one page

Hello
When a document has many lines I want the recurring area for a PLD document to stop at a certain distance from the page footer but the end of report area must remain at the same distance.
Meaning a documnet with 2 pages the recurring area always stops at the same place and restart on the second page when on the 1st page the area reserved for 'end of report' data will be empty and filed up on the second page...
What shall I changed in the format of the recurring area to have it like this?
Thank you....

hi DELANOE,
Go to Administration>System Intialization>
Print Preferences-->Set Max. Rows per page(as per y'r requirement).
In PLD normally End of Report will be empty if print documents
goes more than a page,End of Report will be displayed in
last page.
Hope above answer will help you.
Jeyakanthan.

Similar Messages

Printing page range in document with more than one page #1

I have an insurance application which has 24 pages numbered 1-6 then restarting 1-18. This is not just the page # at the bottom of the page but the page number that Adobe Free Reader is showing. When on the last page the top of the screen shows [18] 24 of 24.
I want to print the first page 5 which works fine when I print current page or a page range. Then I want to print 1-12 of the second section which I have tried printing as 7-18. This gave me the pages numbered 7-18 of the second section. But if I try printing page 1-12 I get 18 pages or 1-6 + 1-12.
Any help would be appriciated.
Thanks,
Paul

Change the Preference from using logical pages to physical pages and then select the physical pages.
You should provide unique names for the page numbers when you apply page numbers to the PDF and you need to fix them if you merge PDFs.

Can I open more than one Pages document at a time with the IOS app?

This sounds crazy, but I can't find how to open more than one Pages document at the same time when using the Pages app on IOS.
It's easy on the Mac, but on my iPad? Can't seem to do it!
I'm working on a project where I'm writing one document, but having to frequently cross-refer to another. Having to continually open and close each document, one at a time, on my iPad is driving me mad!
Am I missing something really obvious? Can anyone help please?

Many thanks, that's really useful. I've saved the document I'm referring to as a PDF and can now work exactly as you described.
As you say, it's not elegant, but it does work
Just need to ensure my fingertips are very dry, as I fear any slight 'catching' with a four finger swipe and my iPad will fly across the room / train / office

When I read a pdf document using Safari I'm unable to read more than one page of a file. A padlock icon is locked on the tab. Please help.

When I read a pdf document using Safari on my IPad I'm unable to read more than one page of a file. A padlock icon is locked on the tab. Please help.

Hi snoreaustralia,
It sounds like you just need to associate the PDF filename extension with Acrobat, rather than Preview. Please see this document from the Microsoft Help for instructions on choosing the default program for opening a particular file type (in your case, PDF): Change which programs Windows uses by default - Windows Help
Best,
Sara

How to Print Html Document (more than one page)

I've a problem with printing my html page. I can print one page of html file, But my document is longer than one page. and i can't print it.
who know how to print . Please Reply

A recent article in JavaPro has a nice solution for this problem. Check out
http://www.fawcette.com/javapro/2002_12/online/print_kgauthier_12_10_02/
It describes a way of using Views to break down the pages.

Why can't I paste more than one page at a time?

I have a problem with Pages when I try to paste more than one page worth of content at one time.
In my business I have a form online for clients to fill out. When the clients have finished the form, I copy the form (saved either as a safari document or as a pdf) and then try to paste what I have into Pages. It should flow to fill out four pages, but for some odd reason it only fill the first page of a Pages document, then it gives me a second blank (empty) page. So the document is two pages long, but only the first page has content.
I know the pasted information is hidden in the document, because if I were to cut (erase) a few lines of content, the pasted information would appear from the bottom of the page to fill the space I just made.
Why is Pages not making a four page document containing all my pasted information? Why isn't it flowing to fill out as many pages as it takes to show all the information?

Michele Stapleton wrote:
I think using Numbers is too complicated because what I want essentially is a text document I can alter. I take the information they put into my form and repurpose it in a way I find more useful while performing the job. So, I want to be able to take their typed information and move it around. And add some more of my own.
You may perfectly "their typed information and move it around" in Numbers which behave as the AppleWorks Draw environment.
Here is the second page in the document which I posted before.
As you may see, the standard Word Processor features are at work:
Spell Checker
Selection…
I exported my AppleWorks documents in Numbers ones.
And of course, with the Numbers document open, you may copy pieces of it and paste them in Pages's pages.
Yvan KOENIG (VALLAURIS, France) jeudi 16 juin 2011 16:44:30
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

How do you fax more than one page at a time?

How do you fax more than one page using the phone?

Hello @spirittoo,
I am not quite sure what you mean.
Are you using a third party app to send faxes from a cell phone?
In case you are having an actual fax issue, I have included the following links.
Send a Fax from the Scanner Glass or the Automatic Document Feeder
Fax Sending Fails Intermittently or Fails for Only One Recipient
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Why can't I print more than one page?

I'm pring a lafge text:
<af:inputText id="it1" value="#{main_bean.resp}" readOnly="true"
simple="true" rows="#{main_bean.kvitRows}" styleClass="AFStretchWidth"
visible="true"/>
That is I use one af:inputText with many rows.
To send it for pring I use JavaScript.
<af:resource type="javascript" >
function printPage(evt){
window.print();
evt.cancel();
window.close();
</af:resource>
When printing it clips the text. If the text is more than one page it print only one page. I need to continue printing on the next pages (not to clip). When printing othe web-pages it distributes it onto several paper pages.

Michele Stapleton wrote:
I think using Numbers is too complicated because what I want essentially is a text document I can alter. I take the information they put into my form and repurpose it in a way I find more useful while performing the job. So, I want to be able to take their typed information and move it around. And add some more of my own.
You may perfectly "their typed information and move it around" in Numbers which behave as the AppleWorks Draw environment.
Here is the second page in the document which I posted before.
As you may see, the standard Word Processor features are at work:
Spell Checker
Selection…
I exported my AppleWorks documents in Numbers ones.
And of course, with the Numbers document open, you may copy pieces of it and paste them in Pages's pages.
Yvan KOENIG (VALLAURIS, France) jeudi 16 juin 2011 16:44:30
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Can I split a spreadsheet table over more than one page?

Is is possible to split a table so that data can be linked from page to page?
I would like to have a table with formulas on page 2 referencing data from another linked table on page 1 of a Pages document.
I know this used to be possible in Appleworks. In fact I have some old Appleworks docs like this, but when I try to open them in Pages they get scrambled. Any ideas anybody?

Thank you both for your help. It sounds as though the answer is "No, this can't be done"
Neither of the 2 options suggested quite fit the bill as my document is a text document report with embedded tables, which do need to refer to each other across more than one page, but still needs to be well laid out for printing and easy reading by others. It seems strange that something which was easy to achieve in Appleworks should be impossible in iWorks, since I thought this was meant to be the replacement program after Apple stopped developing Appleworks.

How to use beans in more than one page

hello members,
can somebody tell me how to make beans availabe to more than one page ,i used scope variable as "application"
in which i set the value of java bean and in that page it show all values of that bean even it modified
but when redirect to another jsp page it does not show modifided value,it shows its default value
what shld i use tell me
following thing that i use in forwarded jsp page
<jsp:useBean="same id in previous jsp page", class="same class", scope="application"/>
and then i am using boolean variable which set false default ,but i set it manually though
setfuction (assume) in original jsp page,but in redirected page it showing it value fasle
i don't know why
can somebody (Bean Bond) help me in this problem
i will very thankfull to you
plz..................

My dear friend,
your scope is wrong. Since you run a JSP page and you want it available everywhere, the only thing that all pages have common is session. So changing your bean scope to session will keep the bean variables and the rest you have on it.
Try it and let me know.

How to use more than one page to design a form-like report???

Hi
I am designing a form-like report. and widening the repeating frame to contain all the page or the window like this page:
Image: !http://up1.m5zn.com/photo/2008/12/21/07/e728mos12.jpg/jpg!
Now there is no space at the window to complete designing the report!
How to make the repeating frame to contain more than one page or one window to complete designing the report?

change Vertical Panels per Page to 2 (or more as needed) for the Main Section of Layout Model.

How to go back more than one page at a time?

I'm pretty sure there used to be a drop-down arrow by the back/fwd buttons, so you could go back more than one page by selecting it. Yeah? Where did it go?

You can either right-click on the back/forward buttons or hold down the left mouse button until the list appears.

Is it possible to add more than one page at a time in pages - word processing?

Is it possible to add more than one page at a time in pages - word processing?

I haven't been able to find a way to add more than one page at a time. I think you'll have to add them one at a time.

PLD document is more than one page

Similar Messages

Maybe you are looking for