PLD- Layout ex- und importieren

Hallo,
ich habe mit Hilfe des PLD Layouts erstellt. Dies habe ich allerdings auf einer Testumgebung gemacht.
Nun würde ich gerne die Layouts exportieren und dann im Zielsystem importieren. Ist dies möglich?
Danke im vorraus für die Hilfe!

Eine kleine Ergänzung noch, sofern CopyExpress noch nicht eingesetzt wurde:
Es können bestimmte Informationen / Einstellungen / Daten nicht nur zwischen zwei Datenbanken ausgetauscht werden, alternativ kann das Ergebnis auch eine XML-Datei sein um diese dann zum Einspielort zu transportieren.
Der Austausch zwischen 2 Datenbanken bedarf ja der Verfügbarkeit der beiden DBs auf einer SQL-Instanz - dies kann so umgangen werden.
Vorsicht Falle:
Sofern in den PLDs User Defined Fields vorkommen, müssen diese natürlich auch noch in die Zieldatenbank übernommen werden oder dort bereits angelegt sein.
Viel Erfolg und Grüße aus dem hohen Norden
Heiko

Similar Messages

  • Speichererweiterung für PLD Layout möglich

    Hallo @all,
    eine Frage: Ist es möglich die von SAP zugewiesene max. Speichergröße eines PLD Layoutes zu erweitern?
    Begründung: Unser Kunde erstellt ein Angebot über mehr als 80 Positionen mit entsprechenden Artikelbildern.
    Beim Drucken bekommt er folgende Meldung "Nicht genügend Speicher (ODBC -100)"
    Setzt er die Bilder auf nicht sichtbar im Layout, so kann er den Beleg drucken.
    Gibt es also die Möglichkeit die zugewiesene Speichergröße zu erweitern und wenn ja, wie wird dies eingestellt?
    Grüße
    René
    Edited by: Ulrich Heep on Oct 21, 2010 9:57 AM

    Eine kleine Ergänzung noch, sofern CopyExpress noch nicht eingesetzt wurde:
    Es können bestimmte Informationen / Einstellungen / Daten nicht nur zwischen zwei Datenbanken ausgetauscht werden, alternativ kann das Ergebnis auch eine XML-Datei sein um diese dann zum Einspielort zu transportieren.
    Der Austausch zwischen 2 Datenbanken bedarf ja der Verfügbarkeit der beiden DBs auf einer SQL-Instanz - dies kann so umgangen werden.
    Vorsicht Falle:
    Sofern in den PLDs User Defined Fields vorkommen, müssen diese natürlich auch noch in die Zieldatenbank übernommen werden oder dort bereits angelegt sein.
    Viel Erfolg und Grüße aus dem hohen Norden
    Heiko

  • How to attach PLD layout for my custom form.

    How to attach PLD layout for my custom form.
    Or
    How to enable print functinality for my custorm form - purchase indent etc
    Is the only option is Query print layout or any other option?

    Hi,
    Unfortunately, you cannot create your own PLD layouts for your addons. Instead, most developers opt for a third party report writer such as Crystal Reports or SQL Reporting Services to provide reports.
    If you search this forum you'll find a lot of useful information on how to integrate Crystal with your addon.
    Kind Regards,
    Owen

  • PLD layout template cannot change or modify layout contents..

    Dear Experts,
    I have duplicated a PLD layout template, but then when I wish to change either a picture or texts in the template, I was not able to save the template thereafter.
    On a closer look at the DB, I realized the RDOC.CanChange field is set to 'N'. Can anyone advice me the nature of this field if it is related to my problem? and how I can set it to 'Y' using the SBO application.
    Thanks in Advance!
    Warmest Regards,
    Chinho

    Hi LIm ,
    The header data of any PLD goes to Rdoc and Item level data goes to Ritm table .
    Actually this is right concern for u , but this should by Y.
    So pls instead of changing from backend , kkep looking  fron front end .
    If you duplicate a pld template and save this with your own given name, u can do changes .
    this is ideal application od PLD.
    Chek the  database and formula field of your pld .
    Hope this will help u .
    Rgds,
    Premraj

  • Cannot Display Chinese Word if pdf preview for PLD layout.

    Hi,
    I am facing a problem when user pdf preview the pld layout with chinese word, the content will be blank, it will not be displayed. Print preview work fine for chinese wording.
    I had tried to change the font to every chinese character through the drop down list, but it still happen the same.
    I had check the pdf version, it can display chinese wording that not from SAP.
    I had search in the community, but none of them meet my requirement, as most of them happen in crystal report.
    Can anyone help? Anyone experience before?
    Another thing is, why in the General setting > path, there is no setup for pdf?
    Thanks

    Hi,
    Please refer SAP note for solution:
    1406074 - Chinese / Japanese Characters not exported to PDF
    Thanks & Regards,
    Nagarajan

  • PLD Layout change option is not avialable in Limited User Licenses

    Hi Experts
    I have purchased 2 CRM & 2 Logistics Licenses. In both of licenses PLD designer is not opened. It gives message 'You can't open window (60213) Type List Form with your current License. Is it not possible to open PLD design with limited users. I have check that I give full authorization to the users.
    Regards
    Jitender

    Hi,
    Editing PLD layouts is considered a part of system management tasks for SAP Business One. This means that the Limited Users are not able to edit the PLD layouts.
    Document settings (numbering, print preferences)  is set NULL for both CRM & Logistics limited license. so it is not possible to change the layout too.
    Regards,
    Rakesh N

  • Backorder PLD Layout

    Experts,
    I have an old client using SAP 2007A PL=49.
    They would like to know what PLD variable could be utilize in the Backorder PLD Layout to display the price after discount?
    Thank you for any  suggestions in advance.
    Regards,
    Jose

    Gordon,
    Yes, they need to edit the existing Backorder PLD layout. We tried using the generic variable for price after discount and that is variable #80 but it does not work on the Backorder PLD Layout at this version.
    Any additional advise would help?
    Thank you.
    Jose

  • Add custom query to standard PLD layout

    Hi Everybody,
    I need to change the standard Invoice PLD report, in order to include additional data that is
    kept in my UDO.
    Is it possible to define a custom query inside PLD to retrieve data from the UDO
    (the UDO is linked to the Invoice) and show it in the Invoice layout?
    Thanks all,
    Manuel Dias

    Hi Manuel,
    One workaround you can try is to use UDF and formatted search to retrive the info on the invoice screen and then directly display it on the invoice PLD.
    Hope it helps.
    Regards,
    Hamsa

  • Grafik bei zweispaltigem Layout Fixieren und Nummerieren

    Hallo!
    ID CC: Bild im Anhang zeigt symbolisch Seiten mit zweiseitigem Layout. Orangene Vierecke symbolisieren Grafiken welche mit einer "Liste/Nummerierung" automatisiert der Reihenfolge nach durchnummerieren.
    Ich möche nun Grafiken auf der Seite 3 plazieren (5-7), welche nicht wie Grafiken 1-4 in eine Spalte passen, sondern über 2 Spalten reichen. Diese Grafiken sollen FIX (statisch) immer auf Seite 3 verbleiben, auch wenn auf Seite 1 od. 2 ein Text/Grafik hinzugefügt wird und sich damit die Absätze verschieben (dann soll der Text zwischen den Grafiken fließen/sich verändern- ohne die Grafikposition 5-7 zu verändern).
    Geht alles durch einfaches ausschneiden und die Grafik an die gewünschte Position einfügen (vom Textfluss gelöst). Benötige aber auch eine Nummerierung, was nur im Textfluss in richtiger Reihenfolge geschieht oder durch einen Textanker setzen. Habe mit den Textankeroptionen  aber schon viel herumprobiert und bekomme das einfach nicht hin. Oder geht das nicht? workaround?

  • Add a Table to PLD layout

    Hello Everyone,
       Looking for some help. I am trying to change the PLD for the Pick List in SBO 8.8. I want to add a field from the ORDR table to the pick list. This table is not in the standard list.  So, I am trying to add the table by adding a database field that links to the Sales order number on the Pick List row.In the Properities menu, on the Content tab, I am  using the ATL+Click on the Table editbox dropdown, where I can select the ORD table. In the Column editbox I am selecting the Document Number and in the Relate To editbox I am selelcting the unique Id field which displays the Sales Order Number ( f_230).  I am pulling information from the ORDR table BUT I am not getting the information from  correct Sales Order.   What did I do wrong ?
    Kathy

    Hello Kathy,
    Alt+click is not a supported function. Even though you can add any tables to the PLD, you may not be able to link them correctly.
    Thanks,
    Gordon

  • Diffrent prints of same pld layout from diffrent printers

    Hi
    I have freezed one sales invoice pld for a pre printed invoice.
    When i print it from one printer then it shows exact print on the pre printed paper as desired.
    Now on another system and printer i use same pld, it shows different print and there is a lot variation of print from two different printers though the paper setting for both printer is A4.
    Plz suggest me how to solve it.
    Thanks

    Hi Pari ,
    Priprinted format are printer dependent , driver dependdent , however page size is same , the format will change .
    So every time u change the printer u have to make the settings again .
    Every [printer have there own settings like to margin , bottom margion , where the printer start to print and others lot .
    rgds,
    Premraj

  • PLD LAYOUT -  cUSTOMER/VENDOR TIN NUMBER

    HI FRIENDS,
    I AM CREATING A PLD FOR A/R INVOICE. I NEED TO DISPALY THE CUSTOMER'S TAX INFORMATION DETAILS LIKE PAN NUMBER,TIN NUMBER ETC . FROM WHERE I GET THESE DETAILS

    All those tax IDs can be found in table CRD7.
    Hope it helps,
    Vasu Natari.

  • PLD Layouts - Identifying which are default for specified users

    Hi Experts,
    We have around 30 invoice layouts - we are in the process of deleting the older obsolete layouts.
    However, some them are set as default layouts for specifc users.  I was hoping to write a query to identify layouts and which users have them set as default.
    The layout header table is RDOC.  Which tables contain the list of users assigned to each layout?
    Thanks
    Greig

    The table where this information is stored is RDFL
    SELECT DoumntDode, UserId, DfltReport, CardCode
    FROM [dbo].[RDFL]
    Sample data
    DoumntDode      UserId       DfltReport   CardCode
    JDT7              12           JDT70003        -1
    RDR1              -1           RDR10003        C20000
    DoumntDode = RDOC.DocCode
    UserId = OUSR.UserId..........................-1 indicates all users
    similarly if CardCode has -1 then specific users all BP's
    Suda

  • Service call Layout

    Dear experts,
    I need to do a PLD layout on the service call document. My objective is to summerize all the expenses incured and their totals.
    e.g.
    Spare parts     2,000
    Consumables  1,200
    Regards

    Hallo,
    also wenn du in Crystal Reports die beiden Tabellen OSCL - Serviceabrufe und SCL5 - Serviceabruf-Aktivitäten verwendest, verknüpft über die callID sollte das doch funktionieren.
    Ich sehe den Bereich Details in dem Fall als deinen "Wiederholungsbereich" an.
    Wenn du in der Sektion Details bspw. das Feld ClgID - Activity Code reinziehst erscheinen bei mir soviel Aktivitäten wie für den Serviceabruf hinterlegt sind.
    Hoffe das hilft.
    Gruß Jacqueline

  • Outputting values in PLD

    Hi
    I am trying to change the PLD layout of the default Tax Report in SBO so it meets the spanish standards.  My problem is extracting the values i require to specific fields in the layout - as the default layout considers it as a default.  I am certain that I have to use an IF statement here (something that doesn't exist in the PLD) and have tried working around it and been unsucessful.  I hope some may be able to help me extract these values from the one variable.
    regards
    Vivek

    Hi Vivek
    I hope that this will help U
    suppose u want to check
    if  A = B then C else D
    1).  Create a field which displays A (say field ID is 50)
    2).  Create a field which displays B (say field Id is 51)
    3).  Create a formula field which equals fields 50 and 51 (say field Id is 52)
    4).  Create a field which displays C (say field id 53) and link it to field with ID 52 so that if field 50 is equal to field 51 then field 53 will be displayed
    5).  Create a formula field with formula 'fields 50 not equal to field 51' (say field Id is 54)
    6).  Create a field which displays D (say field id 55) and link it to field with ID 54 so that if field 50 is not equal to field 51 then field 55 will be displayed
    Regards
    Selin

Maybe you are looking for