PlD preview in pdf

Hi experts
i have pld of production order when i take a print preview it http://screencast.com/t/auz3xb3RmhUb good but when i preview in pdf see screen shothttp://screencast.com/t/3G8IP3p4SwoC
Why

HI
If itd on repeatative header,then it prints only on first page.
Refer the below document,which will help you more:
http://www.beabetterbusiness.com/pdfs/knowledgebase/how-to-print-layouts-in-sap-business-one.pdf

Similar Messages

  • Mac with Lion OX, in print preview with PDF, only page 1 comes correctly, the rest misses some portion rest not

    I have iMac desktop with Lion OS. I am using Firefox 6 web browser. Previously with Snowleopard OS I did not have any problems with printing, With Lion OS print commands have changed and when I click preview in PDF format for printing a web page, only page 1 of the document shows correctly. In second page, the text does not show all of the document and few lines at the boundary is missing and the font is different from page 1. I tried using Google Chrome browser and this does not have this problem. If I do not find a solution I may be forced to move to Google Chrome. I will really appreciate a response. Thanks.

    Why not reconstruct the pages in InDesign they way you want the double pages to appear. There may even be an imposition script available that will do the trick. You could then output to pdf all the pages you want the full spread on. Leave the original to create the pages you wanted left as is.
    You can ask in the ID forum about an imposition script. I know there was one with CS4, there may have been one with CS3.

  • Kde 4.9.3 no preview for pdf files in dolphin ?

    I have poppler and poppler-qt installed but still I dont see option to turn on preview for pdf files.

    You need to install kdegraphics-thumbnailers, then enable PDF preview in dolphin configuration (General > Preview)
    Last edited by jib2 (2012-11-16 22:30:20)

  • Does Preview compress PDFs when saving?

    Hi.  My scanner can group separate scans into a single PDF on its own, but it is significantly slower than scanning documents separately and merging them with Preview. 
    Since scans are essentially saved twice when going the "merge with Preview" route (once when scanned, again when merged), I'm curious to know whether Preview compresses PDFs with each save.  If so, I'd like to know how lossy this process is.  Anyone know?
    Thanks in advance for any help / info!

    Preview suck!!! Please for your own sanity use acrobat to edit PDF. Get it from adobe.com

  • Preview in PDF

    After I create a form, save it, and select Preview in PDF, none of the fields work. You cannot enter text in a text field, select a check box, or click on a radio button. When I open the same form using Adobe Acrobat Pro, it opens and works just fine. How do I make Preview in PDF functional in LiveCycle?
    I would appreciate it if someone would respond, even with just a simple "Hi" so I know this question is actually visible in the forums. I'm beginning to wonder if I am asking questions in the wrong forum.
    Thanks
    gb

    Check your settings.
    Go to File >> Form Properties >> Preview tab.  Make sure "Preview Type" is set to "Interactive Form".  And I also have "Preview Adobe XML form as:" set to "Dynamic XML form".
    Hope this helps.

  • Pusrchase order having 3 line item But print preview in PDF shows blank.

    Hi All,
    Purchase order has 3 line items. While taking print preview in PDF format 1st page shows 1 line item and 2nd page is blank.
    I am not understanding the issue why other two line items are not getting displayed.?
    Please provide me with the solution.
    Thanks
    Forum

    Yes,there is a issue in print preview itself , if there is a issue in Print Prview that means page is gets skipped on next page ,therefore 2nd page automatically gets blank ,debug the same with abapor ,if this problem gets resolved then automatically system will convert the document in PDF as per print preview.
    Regards,
    Sandesh Sawant

  • Chinese char issue in smartform preview as pdf format

    Hi chinese guy!!
    please help me with chinese char in smartform preview as pdf format
    i created smartform with chinese char and then when executing this smartform by t-code smartforms, it show as simplified chinese char, but when getting JOB_OUTPUT_INFO in order to convert OTF as pdf format, although smartforms performed as pdf format, only chinese char were broken. smartform with english or korean language does not have any issue, only chinese issue now.
    i got into r/3 as logon ZH by SAP GUI english version  and i used adobe acrobat reader chinese simplifed version. r/3 version is ecc60 unicode system***
    please help me,, any chinese guy there?
    1.  CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    2.    CONTORL_PARAMETERS-NO_DIALOG = 'X'.
           CONTORL_PARAMETERS-GETOTF = 'X'.
           OUTPUT_OPTIONS-TDNOPREV = 'X'.
           CLEAR JOB_OUTPUT_INFO.
    3.    
    CALL FUNCTION FUNCTION
        EXPORTING
          CONTROL_PARAMETERS = CONTORL_PARAMETERS
          OUTPUT_OPTIONS     = OUTPUT_OPTIONS
        IMPORTING
          JOB_OUTPUT_INFO    = JOB_OUTPUT_INFO
        TABLES
          ITEM               = ITEM
        EXCEPTIONS
          FORMATTING_ERROR   = 1
          INTERNAL_ERROR     = 2
          SEND_ERROR         = 3
          USER_CANCELED      = 4.
      OTF_TAB[] = JOB_OUTPUT_INFO-OTFDATA[].
      CALL FUNCTION 'CONVERT_OTF'
        EXPORTING
          FORMAT                = 'PDF'
        IMPORTING
          BIN_FILESIZE          = PDF_FSIZE
        TABLES
          OTF                   = OTF_TAB
          LINES                 = PDF_TABLE
        EXCEPTIONS
          ERR_MAX_LINEWIDTH     = 1
          ERR_FORMAT            = 2
          ERR_CONV_NOT_POSSIBLE = 3
          OTHERS                = 4.

    hi,
    please see the notes 999712.
    thanks

  • No printer in preview or pdf after downloading Tune Up my Mac

    After downlading Avast and Tune Up my Mac, I can no loger print from Preview or PDF function from a downloaded file, such as a bank statement.  I have a Mac mini Mid 2010 using lion 10.7.5.  When I go to add printer from the print window that pops up, there is no printer available, however I can print from a regular "Pages" document without a problem.  Most annoying.

    That's because "Avast" and "Tune Up" are both scams, and they wrecked your system.
    "Avast" is perhaps the worst of the whole wretched lot of commercial "security" products for the Mac. Not only does it fail to protect you from any real danger, it throws false warnings, destabilizes and slows down the computer, and sometimes or always corrupts the network settings and the permissions of files in your home folder. Removing it may not repair all the damage, and neither will Disk Utility or even reinstalling OS X.
    Back up all data, then remove "Avast" according to the developer's instructions. Restart.
    If you tried to remove Avast by dragging an application to the Trash, you'll have to reinstall it and then follow the instructions linked above.
    Remove "Tune Up" as well.
    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and (unless otherwise specified in this comment) I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
    Back up all data before making any changes.
    You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

  • Preview a PDF inside my AIR application inside transparent and custom window

    I have a transparent windows (skinnable). Inside, I'd like to preview some pdf file. BUT, in the only a black screen appear, can you help me?
    Thanks

    AIR does not support this inherently. However, you could write code to parse these file formats. For example, the following is an ActionScript 3.0 library for reading and writing Excel files:
    http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1375018

  • The thumbnails/previews of PDFs created in InDesign CC look dull or cloudy in Bridge CC

    The thumbnails/previews of PDFs created in InDesign CC look dull or cloudy in Bridge CC. The actual files are fine and open with the correct rich colors, but the colors don't look as vibrant as they should when viewing in Bridge. It's only PDFs that are affected. The InDesign thumbnails/previews display correctly in Bridge.
    This was not happening when I was using CS6. This is only a problem since the upgrade to CC.
    Any help you could provide would be appreciated. Thanks!

    If you're going to mess with the registry
    - create a restore point http://windows.microsoft.com/en-ie/windows7/create-a-restore-point
    - backup the registry http://windows.microsoft.com/en-us/windows/back-up-registry
    I absolutely plead with all my heart - don't start changing registry entries unless you know what you're doing - or ask your IT department to take a look.
    If you don't have an IT department, then source a good professional that can make these changes.
    If any way unsure - then under any circumstances, - do not mess with the registry.

  • Using Layers in a PDF using Preview or PDF Pen

    I am seeking advice on how to handle superimposing one PDF on top of another PDF. (As we did in the old days, with tracing paper and a copying machine.)
    These PDFs are drawings. One PDF is coming from one person the other PDF is coming from someone else. We want to be able to merge these two PDFs into one file and we need to be able to position the drawings on top of one another precisely.
    That way, when one person changes there PDF we can re-merge with the other persons original PDF, Creating a new document that reflects the changes.
    All of this is very simple when using a CAD program. But I must deal with PDFs.
    I have preview and PDF Pen as my present software tools. I am open to purchasing something else.

    We took the original file via an email attachment, and used PrimoPDF to create a new file.  It is in this new file that we cannot use the word search features.  The Reader version is 8.1.4.
    I also tried this on my PC using Reader version 7.0.8, and the search works fine.  It can't be a newer version that's causing the problem, could it?

  • Heavy lag and "not responding" when using Preview for PDFs

    Hi there,
    I have a problem with my MacBook Pro (9,1 15" Late 2012) running Mavericks 10.9.1.
    Sometimes (quite often in the last weeks) Mavericks getting furious when I try to preview PDFs. This happens:
    - I get an PDF. It came from my eXactScan add, from an email adress or I downloaded it - the source doesn't matter.
    - I open the finder and want to preview the PDF with the built in preview and I get the spinning circle / load indicator. The circle runns for a long time.
    - I can use Mavericks without any problems but the Finder only shows a small thumbnail of the file I wanted to preview.
    - Now it's getting dirty: when I double click the PDF to view it with the Preview app the whole system "crashes":
    the Preview app won't open (but it is shown in the dock),
    my open Mail and Chrome wont react any more or start to lagg very heavy,
    the Finder laggs very heavy
    but the OS (menubar, dock, etc) responds without any problems.
    If I open the "Close Apps" window the apps mentioned above are marked with "not responding".
    I waited for some time but nothing gets better.
    The only way to get rid of the problem is to restart the Mac which works without any problems.
    That's it.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Can't preview some PDF files

    Most of PDF documents can be easily previewed in Firefox without downloading. There are some, though, for example confirmations of bank transfers which aren't previewed and an ordinary download dialog appears.
    This happens on Firefox running on two different computers (one using Linux Mint 17.1, the other - Windows XP)
    How can I fix it?

    ''finitarry [[#answer-686461|said]]''
    <blockquote>
    Just how do you preview a .pdf document without loading it? I see no option to do that from a link. Even if you choose to open it, it must be copied to your system before it can be opened.
    </blockquote>
    Maybe you misunderstood me and maybe I wasn't clear
    If I open a regular PDF such as this [1], it isn't an explicit download. The content is of course loaded but no download dialog shows up. Neither does the file appear in the downloaded files. It's quickly previewed in browser.
    If, on the other hand, I try to load a PDF generated by the website of a bank, the document isn't previewed in browser.
    [1] http://www.kgof.edu.pl/archiwum/63/of63-1-1.pdf

  • Preview Livecycle PDf in Windows 7 Preview Pane

    Is there a way to preview Livecycle PDF's in the Windows 7 Preview Pane?

    Hi,
    when you save an XFA form as PDF, it creates a shell PDF that surrounds the complete XFA contents.
    This shell PDF itself is a simple one page PDF with a message for the users if the PDF viewer wasn't able to read the XFA contents.
    This message looks this way.
    In the Windows Explorer you will only see this message in the preview, because it dosn't support XFA.

  • Icon instead of image preview in PDF portfolio

    We are creating a lot of PDF portfolio using Acrobat X Pro. Part of files included in these portfolios are simple JPEG images. On one of our machines - the one with Acrobat X Pro installed - we have a problem that inside portfolios these JPEG files are displayed as icons currently associated in Windows with JPEG images. On all other machines these portfolios are displayed correctly, as image previews, but on this one we have these images displayed as icons.
    We tried some standard and some non standard things: Acrobat X Pro reinstall, antivirus software uninstall, JPEG icon association reset, etc.
    What can block these images?
    I
    We are using (on all machines) Windows XP SP3 PL, Comodo Internet Security Premium, latest Adobe Acrobat with all updates.
    Ryszard

    Hi,
    On my machine the previews are displayed correctly for JPEG files in Portfolios.
    You can repair your Acrobat installation from Add/Remove Programs in Control Panel and see if things work correctly.

Maybe you are looking for