PLD:Print country name in 'Bill To' & 'Ship To' Address

Hi.
I want to print "Bill To" & "Ship To" address but the problem is that it is printing country code instead of country name.
Is there any solution?
Regards,
Uday Shankar

To set the default address format for a country go to Administration -> Setup -> Business Partners -> Countries and choose an Address Format.
The system will use the address format based on the BP Bill to country so let's say you create an Invoice for a customer who's Bill To country is UK, then in the address field on the invoice the address format set up under Countries for UK will be used - so if you set this address format under Address Formats for UK to display the Description, on this invoice you will see United Kingdom instead of UK.
Hope it makes sense.
Regards,
Nat

Similar Messages

Receivables - ARDLP Report Not Printing Country Name

AR Report ARDLP for concurrent program Dunning Letter Generate is not printing Country Name on send to and remit to part of the letter. Though the package 'arp_addr_label_pkg.format_address' is giving the output with the country name(when I ran the package in SQL Developer) but when I run the report it is not giving the country name. What could be the reason?
Thanks,
Sravanthi

Thankyou very much Nagamohan. It is printing the country now on the dunning letters. I think it was because of settings in system options though the default country was set, print home country was unchecked. When I reran the process it printed the country.
The Statement print program also had the same issue. Now after the changing the system options, it is printing the country in the send to address but not in the remit to address if the countries are same for both send to and remit to. If they are different it is printing in both the places. Eg. If it is United Kingdom in both send to and remit to, its printing only in send to. If its united states in send to and united kingdom in remit to then its printing in the remit to area. Any idea on this?
Thanks,
Sravanthi

FI Correspondence Print Country Name in all Addresses

Hi Experts,
I am using form script to print payment advice as correspondence and below is script (SAP standard) I am using in element "Address". My client has the requirement that even if the vendor is local (of same country) then also in the address data COUNTRY NAME should be printed.
I understand there is some conceptual logic due to which for local country addresses country name is not printed.
Any way through which we can print country name even for the local vendors?
/:   ADDRESS PARAGRAPH AS
/:   TITLE       &REGUH-ZANRE&
/    :NAME        &REGUH-ZNME1&, &REGUH-ZNME2&, &REGUH-ZNME3&, &REGUH-ZNME4&
/:   STREET      &REGUH-ZSTRA&
/:   POBOX       &REGUH-ZPFAC& CODE &REGUH-ZPST2& CITY &REGUH-ZPFOR&
/:   POSTCODE    &REGUH-ZPSTL&
/:   CITY        &REGUH-ZORT1&, &REGUH-ZORT2&
/:   REGION      &REGUH-ZREGI&
/:   COUNTRY     &REGUH-ZLAND&
/*   FROMCOUNTRY &T001-LAND1&
/* Inserted,see Sap Note 167440
/:   ADDRESSNUMBER &REGUH-ZADNR&
/: ENDADDRESS
Thanks and Regards,
Prashant Rane

Hi Michael,
Thank you for your reply.
Could you advise yow to change this to see the Country Name and Code in Print form
Thanks & Regards,
Venkataraju

Invoice print country name

Dear Experts:
When printing invoice to customer, the country name will be printed in last line.
When the customer is EU country, the country name will not be printed in last line.
"Print country name" flag is set in OY01.
How can I print EU country name in last line on invoice ??
Shwan Wang

Hi,
What i understand of this is that you can either select - EU country or Print Country Name.
Since European countries dont print country names at the last line of the address, i believe you wont be able to print EU country in the last line based on standard settings.
Regards
Ravi

PLD cant print Country name when I link country code field to OCRY variable

Dear Experts,
I am using PLD, and from the database variable OCRD we have the OCRD.Country field which returns a Country Code, I link it to a OCRY.Name database variable, hoping this variable can print me the country name.
However, it doesn't, what am I missing here? Is it a PLD bug?
Thanks!
Warmest Regards,
Chinho

Hi Chinho,
You are welcome.
The link to is slightly different.
Say if you added a database field to a layout such as contact name. Next to the contact name you may have a text field that contains the text "Contact:" This will look on the layout like
Contact: Joe Bloggs
You can link the "Contact:" text field to the field ID of the database field, if you do that and the database field is empty then the text "Contact:" will not show.
There are a few other uses, you can link a field to a formula field, an example might be that a customer wants to show a big logo on page 1 of documents, if it runs on to multiple pages show a smaller logo. Here you can add the following fields.
1. A big picture field showing the logo
2. A smaller picture field showing the logo
3. A formula field that calculates if the page number equals 1
4. A formula field that calculates if the page number does not equal 1
Link the big picture to field 3 and the smaller picture to field 4.
There are many other scenarios, but both the Link To functionality and the Relate To functionality are useful.
Kind regards,
Adrian

Print photo book with billing and shipping addresses in different countries

I live in the U.S. and would like to create photo books for family living in Europe. Rather than sending the book myself to Europe after having it first printed in the U.S. and shipped to me in the U.S., I would like to simply submit the book to the Apple print service in the country it is destined to anyway.
Unfortunately, the Apple print service bases the country in which the order is fulfilled solely on the billing address of the credit card used, i.e. U.S. in my case. In addition, one can not choose a shipping country other than the country of the billing address.
Has anyone else found a way around this limitation?

I can't offer a way around, but at least for me in Europe it doesn't seem to be a problem: I have had Aperture books sent to England whilst the bill comes to me in Switzerland. I think I read once that quite a lot of Apple's European printing is done in Holland, maybe that makes a difference.
More generally I do find Apple's way of dealing with international customers a bit irritating - I can only order software through the Swiss Apple-store in French or German...

Changing Country for Payments & Billing and Shipping Info

Hi, New to this so please go easy on me.
I am trying to add my payment details, Billing and shipping address etc but I cannot, I live in the UK and it is defaulting to a presumed USA address system and will not let me save my details because of it.
How do I change the country so I can start purchasing music?
Many thanks for your help in advance.
Paul

Scroll down to the bottom and see if there is a flag. Click on it (even if it is the UK flag) and select the appropriate country.

Bill to & Ship to address change at AR Invoice Level

After AR Invoice I unable to change Ship to Address but I can change same Bill To Address Is there any Reason??
Actually there is wrong Ship to Adress follow by User so he need to change that..Please help..

Hi Mangesh..
It is not possible to change the Ship to address after the document is saved, it current default system behavior...
If you need to change the address you to do before saving the document.
Ship to Address
Displays the customer’s ship-to address and additional description as defined in the business partner master data. If required, change the address and the description.
To change the description, either enter in the free-text field, or specify in the address component. To open the Address Component window, choose . SAP Business One updates the address and the description only for this document; it does not affect the business partner master data.
Regards
Kennedy

AR Customer Bill to,ship to address

Hi,
Please help me what is the difference on declaring ship to and bill to address as primary and not primary (enabling the check box)...
thanks a lot n advance...

Hi Prety,
This blog article explains the purpose and usage of the primary designation for site usages v. well - rather better than the manual ...!
http://www.premiertec.com/blog/identifying-address-active-flags-and-primary-flags-in-the-customer-address/
Regards,
Jon

Avoid printing the Country name in the SAP Script

Hi All,
I am printing the address of the ship to customer in SAP script using ADDRESS and ENDADDRESS. The address is formatting based on the country code that I am passing in the COUNTRY parameter. Everything looks fine. But here my requirement is It has to display the address according to COUNTRY parameter and it should display all the part of the address except country name.
I am using the following syntax
/:   ADDRESS PARAGRAPH AD LINES 7
/:     NAME     &IT_SOLDTO_ADDRS-NAME1&, &IT_SOLDTO_ADDRS-NAME2&
/:     STREET   &IT_SOLDTO_ADDRS-STRAS&
/:     POBOX    &IT_SOLDTO_ADDRS-PFACH& CODE &IT_SOLDTO_ADDRS-PSTL2&
/:     CITY     &IT_SOLDTO_ADDRS-ORT01&, &IT_SOLDTO_ADDRS-ORT02&
/:     POSTCODE &IT_SOLDTO_ADDRS-PSTLZ&
/:     COUNTRY &IT_SOLDTO_ADDRS-LAND1&
/:     REGION   &IT_SOLDTO_ADDRS-REGIO&
/:   ENDADDRESS
for example if I pass COUNTRY = 'DE', it is printing country name as 'GERMANY'.
Please advise me how to avoid the country name alone from printing in the address.
It is very urgent requirement. Points will be awarded for helpful answers.
Regards,
Yellappa.

Hello.
Since it's only one script, you can always do it without command address, like this:
* &IT_SOLDTO_ADDRS-NAME1& &IT_SOLDTO_ADDRS-NAME2&
* &IT_SOLDTO_ADDRS-STRAS&
* &IT_SOLDTO_ADDRS-ORT01& &IT_SOLDTO_ADDRS-ORT02&
* &IT_SOLDTO_ADDRS-PSTLZ&
If a field is not formatted as your needs, you can always convert it yourself, it's not that hard (in driver program or create a PERFORM in script).
Hope this solves your problem.
Best regards.
Valter Oliveira.

Country name not printing for EU countries

Hello,
I am using the SAPscript Z_9H_RVORDER02 for printing sales quotes. For EU countries, I notice that the country name is not getting printed in the address.
In the customization OY01, I even checked the checkbox 'Print Country Name', still it does not print the country name. Is there any other setting that I need to make in order to get the country name in the address for EU countries.
Thanks,
Rugmani

Dear Rugmani,
I think this is related to output program issue so,
Please take help of ABAPer and ask him to debug the program, chek how the country field is capturing in the output.
There is a Function Module to capture the address please check that also.
I hope it will help you,
Regards,
Murali.

User Unable to change Ship to address in SC while creating

Hi All,
When user is trying to change the ship to address which was defaulted is unable to make change.
USer is trying to make manual entry in the NAME field change so that the other field would automatically gets changed withrespect to NAME in the SHIP to address tab.
We have informed user that there exist Find option for other ship to address to choose.
But user has insisted that it is easier to make manual change in NAME filed of the SHIP to address tab so that evrything should automatcially gets changed ,This will avoid search time .
All other fields like CC & GL are able to make change
Please let me know what needs to be done to change the ship to address.
Thanks
Prasanna
Message was edited by:
PRASANNA HAVINAL

Hi Ravish,
I am already changing the UOM in the same include and in the subroutine "USEREXIT_MOVE_FIELD_TO_VBAP". But it is again over writing in the standard program. What I need to do, to remain same UOM.
Thanks,
srinivas.

HT1051 Trying to change Shipping and Delivery address for one in the US, from Canada, and can't do it. State and zip code appears in red but no change in country name. Using French (Canada) iPhoto app.

Trying to change Shipping and Delivery address for one in the US, from Canada, and can't do it. State and zip code appears in red but no change in country name. Using French (Canada) iPhoto app.

Larry's right, You can still use your credit card, you just need to change the "billing address" to the recievers address. It gets billed to your CC and delivered to the US

Ship to Party address is missing country name in SAPScript FORM

Hi All,
i had modified the form for displaying the address of the Ship - to - party address, but the country name is missing in the FORM output, can any body suggest a solution for this..
here is the code that i had written...
FORM get_addr TABLES intab TYPE t_intab
              out_tab TYPE t_outtab.
DATA : wa_intab LIKE itcsy,
         w_outtab LIKE itcsy.
DATA v_adrnr_we TYPE adrc-addrnumber.
READ TABLE intab INTO wa_intab INDEX 1.
v_adrnr_we = wa_intab-value.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = v_adrnr_we
    IMPORTING
      output = v_adrnr_we.
SELECT SINGLE * FROM adrc WHERE addrnumber = v_adrnr_we.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_NAME1'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-name1.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_NAME2'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-name2.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_NAME3'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-name3.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_NAME4'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-name4.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_STREET'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-street.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_CITY1'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-city1.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_CITY2'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-city2.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
CLEAR adrc.
ENDFORM.                    "GET_ADDR
and in the form editor it was like this.....
PERFORM GET_NAME IN PROGRAM ZSD_SDPACKLI
USING &VBPLA-ADRNR_WE&
CHANGING &Z_NAME1&
CHANGING &Z_NAME2&
CHANGING &Z_NAME3&
CHANGING &Z_NAME4&
CHANGING &Z_STREET&
CHANGING &Z_CITY1&
CHANGING &Z_CITY2&
ENDPERFORM
ADDRESS DELIVERY PARAGRAPH AS\
NAME     &Z_NAME1&, &Z_NAME2&, &Z_NAME3&, &Z_NAME4&
STREET   &Z_STREET&
CITY     &Z_CITY1&, &Z_CITY2&
POSTCODE &VBPLA-PSTLZ_WE&
COUNTRY &VBPLA-LAND1_WE&
REGION   &VBPLA-REGIO_WE&
FROMCOUNTRY &VBPLA-LAND1_VST&
ENDADDRESS
Thanks in advance..!

Hi Abaper,
In ADRC table,you will have a field by name COUNTRY.This holds the country key.
Using this country key LAND1 in ADRC table,you will have to fetch the Country name from T005T table.The field in the T005T which holds the Country name is LANDX.
You will have to write select querries for this.
By using LANDX from T005T table ,you can display the country name.
Regards,
Kashyap Ivaturi

What is Attr data source name for SOLD,BILL and SHIP TO PARTY

Hi all,
I want master data source names for these SOLD,BILL and SHIP TO PARTY.
Bill to party,Ship to party and Sold to party Master data source names.
Plz give me Some help on this.
i want solution very urgently.
Thanks,
Guna.

Dear Gunasekhar,
There are no separate datasource for 0sold to, 0ship to and 0bill to parties.
They are referrenced to 0CUSTOMER in BW. and the datasources for 0customer are 0CUSTOMER_ATTR and 0CUSTOMER_TEXT.
Assign points if useful
Regards
Venkata Devaraj!!!

PLD:Print country name in 'Bill To' & 'Ship To' Address

Similar Messages

Maybe you are looking for