PLE / PLW400 Initial Setup Issues.

Hi,
I should start by saying that my ultimate destination between the devices is across more than one fuse board / consumer unit. I have a new outdoor games room which comes off a different fuse unit.
So I set up my PLE / PLW 400 units today as per instructions within the same room and they worked just fine. I then moved the PLW unit out to the games room and it worked instantly - my ipad connect wirelessly to my amazement and seemed fine. This evening I took my laptop out and it worked wirelessly and CAT cabled. I then tried to connect my PS4 down there using both wireless and wired. It "saw" the network but timed out getting an IP address. When I then plugged my laptop back in I got "limited connectivity" messages.
As with these things I "invested" a couple of hours resetting, switching on and off etc etc. The laptop connects sometimes, the PS4 never. As soon as I bring it back inside then it's fine.
Do I just cut my losses and accept this isn't going to work? I just want something easy and reliable down in the games room - I don't want constant nagging from the rest of the family that "internets down".
Any suggestions? Or just return to Amazon?
Thanks in advance.

10cu5T wrote:
Hi, I just got an iphone 4s and inserted my sim and everything, it turns on fine but it has issues with the part where the wifi is.. the problem is I am on a university wifi network, and u need to log into it through a browser for it to work, so basically i cant connect to the wifi now until the phone starts and I open a browser and login.. and it wont go forward from there since it keeps telling me to try again.. is there a way to skip this whole setup? please help
no, unless you see the option to use cellular data.
Or wait until you're using a different wifi connection to set up your phone.

Similar Messages

Initial Setup Issues

Hi, I just got an iphone 4s and inserted my sim and everything, it turns on fine but it has issues with the part where the wifi is.. the problem is I am on a university wifi network, and u need to log into it through a browser for it to work, so basically i cant connect to the wifi now until the phone starts and I open a browser and login.. and it wont go forward from there since it keeps telling me to try again.. is there a way to skip this whole setup? please help

10cu5T wrote:
Hi, I just got an iphone 4s and inserted my sim and everything, it turns on fine but it has issues with the part where the wifi is.. the problem is I am on a university wifi network, and u need to log into it through a browser for it to work, so basically i cant connect to the wifi now until the phone starts and I open a browser and login.. and it wont go forward from there since it keeps telling me to try again.. is there a way to skip this whole setup? please help
no, unless you see the option to use cellular data.
Or wait until you're using a different wifi connection to set up your phone.

BT Smart Talk - Initial Setup issue

Hello
Ive downloaded the app for Android, gone through the setting up (ie are you at home...dials home number, enter pin, enter mobile, enter PIN....) after this at the "setting up your account".....I get a message stating "sorry but we cant do this at the moment. This is likely due to our systems experiencing heavy demand. We are working on it - please try again later. If problems persist please see our online FAQ".
Ive tried this a few times, including uninstalling the app, and going back through the the process of installing....but I still get the same message.
Any help much appreciated
Thanks Dean

try smarttalk help 0800 032 2111
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

New MBP 15 retina (mid 2014) freeze during initial setup - any issues?

Hi all - just picked up a new retina MBP 15 base model (integrated graphics / 256GB / 16 GB RAM). After turning it on for the first time and running the initial setup the computer froze on the diagnostics and usage page (after I clicked continue). I had also setup an account and named the computer. After about 25 minutes of seeing a spinning beach ball, I held down the power button for a hard shut down. I turned it back on and it went through the initial setup process without issue (although I had to create a different user account since the previous one was recognized). The computer was pre-loaded with Yosemite and I immediately updated the software with the latest patch. Also, I noticed both user accounts I had made were stored, so I deleted the first one that I created during the failed setup.
Should this be a cause for concern? Everything seems to be working properly outside of the initial setup freeze. Have any other users experienced this? Also, I had thought the macbook would have had Mavericks on it and that a manual upgrade to Yosemite would have been required. Is this an issue with Yosemite? Apologies for several questions in one post.

Hi there again.
I didn't had any of the problems you mentioned (45' minutes setup). We tried along with AppleCare to make a new partition to the hard disk in order to install OS in that one and boot the machine from it. It didn't help as the machine didn't let me to make a partition. Later on we swiped the hard disk and at the moment where you choose the hard disk to install OS, there wasn't any to choose. Returned the machine to the store I bought it and they sent it to the authorized service center where they told me that the machine just didn't have any OS installed.
I asked them why there isn't any hard disks available and they told that there was a problem to the file sector of the hard disk. They repaired it and they sent the machine back to me. Regarding why the machine came with Mavericks and not with Yosemite, I suppose that they had the machine in stock (knowing that Yosemite was released after the MBP mid-2014).
There are still some problems I don't like at all. Safari - opened pdf in browser - fully loaded, scrolling down...cracks.
I'm not happy at all. That was my first purchase on Apple's computers and I don't know if I will do it again.
By the way, I noticed the same performance in other computers as well. (click on "About this Mac", then click on "Overview, Displays, Storage" etc. There, I see cracks on graphics between the change to other tabs.)

Are there any issues with changing IP address of an ACS v5.3 system after initial setup?

I am migrating from ACS v4.2.1 to v5.3. I want the final v5.3 system to assume the IP address of the original 4.2 machine so I don't have to change any configs on the network devices.
Are there any issues with changing the v5.3 system IP address AFTER the initial setup?

I tried it without a problem. I changed the ip address of the WLC many times.
You have to make sure though that:
1-) You change the switchport accordingly to the appropriate vlan if the new ip belongs to a subnet of a different vlan.
2-) Make sure that all AAA clients configured to use the new IP address of the ACS servers.
Here is the procedure how to change the ip of the interface (as per cisco doc):
http://goo.gl/0BYqVT
I changed also by normal ip address command and it works. but of course the server must be standalone before doing that step (i.e. no secondary ACSs registered to it and it is not registered to other ACSs in a distributoin).
HTH
Amjad

My computer was rebuilt this week and I am in the process of setting up iTunes and have a weird setup issue. The music in my playlists plays but the same song doesn't play from the library. Initially, I opened ITunes while holding down Shift of control.

My computer was rebuilt this week and I am in the process of setting up iTunes and have a weird setup issue. The music in my playlists plays but the same song doesn't play from the library. Initially, I opened ITunes while holding down Shift of control key.

Scratch the post above - the musics that plays in the playlist also plays in the library and that is because i forgot that i imported from the cd yesterday. Basically, I see the rest of my music, but it doesnt' play and tells me it can't locate the file though the location in 'perferences' points to the correct location. Getting iTunes to play after a new computer or rebuild is a headache.

T500 Vista buying experience and initial setup problems

This a long post but I felt the information could be used by others buying a notebook and trying to set it up.
I have used a Thinkpad T40 (1 GB, XP Pro) at work since 2003 and just love the rock-solid keyboard, screen, and hinges. The IT department has offered me the most recent Dell computer as an upgrade but I much prefer to keep my old reliable T40.
When my daughter needed a notebook for university in September, it was only natural to consider Lenovo, having heard about too many quality problems with other manufacturers. I wanted this notebook to last through the 4 years without any hardware problems.
I did a lot of research on the Web and read numerous Thinkpad forums. The information gathered was invaluable for deciding which configuration to buy. Note that I have never used VISTA before, nor have I ever opened a notebook to replace parts.
Buying experience:
- On my first contact with the Lenovo Sales desk in Canada, they mentioned there was a special 25% coupon sale, if my configuration was over $1500 (discounted price). These specials come back often, so it is best to check the Lenovo site. At the time, there was a free integrated camera, free upgrade to 250 MB HDD and free shipping. Since these promotions can be removed at any time, I decided to place an online order for a Thinkpad T500, before having completed all my research. It is easy to place an order online. You just have to remember that not all items contribute to making up the $1500, such as MS Office software.
- Lenovo Sales telephone support for answering any questions about online ordering was outstanding and very helpful.
- Note that if a particular online configuration is there one week, it might not be there the next week. It depends on parts availability at Lenovo.
- In order to get the 25% coupon discount, I had to add some items to my configuration to reach $1500, such as Bluetooth, Wifi 5100, which I did not really need, but the saving on the overall cost was worthwhile.
- I had ordered a WXGA (1280 x 800) High Brightness LED Backlit screen and 3 GB of RAM. After reading about the poor display quality of these screens, I was able to cancel my order by phone the next day (after making sure the same deal was still available), and place a new revised order for a WSXGA+ TFT (1680 x 1050) screen. Since the configuration price for an additional 2 GB RAM was $110 CDN, I decided to buy the extra 2 GB RAM (only $43 CDN) as an accessory, on the same order, separate from the T500 configuration. I could then install the RAM myself to save $67 ! Just make sure you pay the extra to get the base 2 GB RAM on one DIMM, since there are only 2 slots available. I know I will only be using 3.5 GB with my 32-bit Windows, but at least, if one of the DIMMs goes bad, I can still operate on 2 GB.
- as for choosing which CPU to buy, I chose in the middle range, starting with the first CPU having 3 MB L2 cache.
- I did not buy MS Office or McAfee Antivirus with the configuration. Since my daughter attends a post-secondary institution, she was able to order MS Office Ultimate 2007 for $64 CDN + $13 for the DVD. Microsoft has had this promotion on their site
(http://www.microsoft.com/student/discounts/theultimatesteal-ca/default.aspx)
for a while, but it is not well known. You get 8 MS products for one low price and it is completely legal for numerous countries ! I downloaded the software since it took 5 weeks to get the DVD delivered ! At the end of 4 weeks, I contacted Microsoft to tell them I had still not received the DVD. So I received the first DVD and a few weeks later, I received a second copy. So much for quick shipping !
Initial impressions:
- I received 3 separate shipments: 1 free Thinkpad privacy filter to install on the screen, the 2 GB RAM, and finally the T500 (which took about 2 weeks).
-The stainless steel hinges are rock-solid. When trying to raise the lid in the first weeks, you have to hold down the keyboard. Not at all like the hinges I see on the Dell notebooks at work.
- The 3 USB port connections are very tight, which means they should last through repeated plugging and unplugging.
- The T500 is surprisingly quiet, more than my T40. You can hardly hear the fan.
- I am extremely satisfied with the screen resolution, colours, and quality.
- The only disappointment was the keyboard ! Typing on the left-hand side (Q,W keys) produced an annoying "clunk". This was the worst keyboard I had ever used, being accustomed to the legendary quality of my T40. Even my daughter complained about the keyboard. I had read on the forums about the "flex" in the keyboard. Before ordering, when I asked the Sales Rep if these known problems had been solved, I was told that yes, the keyboard flex was no longer an issue. Too bad this was not true !
Initial Setup:
- Setup was easy. Just follow the on-screen instructions.
- I was not very happy to see a trial version of MS-Office and McAfee Antivirus on my notebook. I had not ordered it on the online configuration and did not want it. I had read on the forums that other users had all sorts of problems trying to get their own version of MS Office working (activation keys not being recognized), when the pre-loaded software was still there. And I knew how difficult it could be to erase all traces of McAfee by myself.
Hardware problems:
- after I burned my very first DVD, I pressed the Eject button. To my surprise, there was a thin grey foam ring (about 3 cm diameter) sitting on top of my DVD media. I assumed that this came from the roof of the DVD drive and the manufacturing process had missed the glue to keep it there. I contacted Lenovo and they immediately sent out a replacement (received the next day), which was easy to install. I then returned the defective part to Lenovo. My only complaint is that this was a refurbished unit. I was expecting a new unit since the part was defective out of the box and not a few months later.
- for the defective keyboard, I contacted Lenovo and mentioned the numerous complaints on the forums, and they sent me a new keyboard (FRU 42T3938). Unlike the DVD drive, I did not have to send back the original keyboard. However, the replacement keyboard was exactly the same as the original, with a thin flexible backing full of holes. I contacted Lenovo again in the morning and the agent mentioned I should contact Sales, since there was nothing more he could do. That afternoon, the agent called me to say that after further research, he had found a replacement keyboard that would correct the flex. When I received the second replacement keyboard (FRU 42T3210), I knew it was the right one, since there were far less holes in the more solid backing plate. I followed the instructions for replacing the keyboard and added my additional 2 GB RAM at the same time, since it is in the same area, under the palm rest. Now the keyboard is almost like my solid T40, and I am no longer ashamed of the T500 keyboard. For those of you wondering what an ACNOR or CSA keyboard is, it is one where the 5 most common French accented characters (and not only the é) are used with one keystroke. I have been using such a keyboard disposition since 1994 and it is invaluable when typing in French.
For pictures comparing the defective and replacement keyboards, see
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-keyboard-replacement/m-p/158451#M15525
My immediate goals:
- out of the box, there are 3 partitions: partitions Q (10 GB) and S (1 GB) are Lenovo partitions to recover the operating system, C partition is a single partition over 200 GB on my 250 GB DD. I wanted to partition the C: drive in multiple partitions.
- I also wanted to eliminate MS Office and McAfee so I could install my own software (MS Office 2007 Ultimate and free Avast Antivirus). When I contacted Lenovo to ask how I could do this, they said I could use the recovery partition and "customize" it so that this software would not be installed. Turns out that this option was removed by Lenovo. I guess pressure from Microsoft and McAfee was too great ! The only other option was to use Add/Remove.
Partitioning problems.
- I ran Diskmgmt.msc (also available on XP) to see the layout of my HDD. Unfortunately, it did not seem to be powerful enough to partition like I wanted. But it is great to see the layout of the disk and do basic partitioning. (http://www.theeldergeek.com/hard_drives.htm)
- I installed the free EASUS Partition Manager (http://www.partition-tool.com/); the non-free Pro version works on 64-bit. I wanted to partition: C 35GB (Operating System and Office), D 20GB (other applications), E 25GB (Data), F 100GB (Music and Pictures). I also installed the free EASUS Todo Backup (http://www.todo-backup.com/) to do regular image backups as I was proceeding.
- while trying to partition the C drive, I must have made an error somewhere (I think I accidentally declared another partition as the active partition). Whenever I rebooted, I would get the message "Boot MGR is missing". I could not even use the recovery partition (Q and S) on the HDD. So my notebook was totally unusable. Fortunately, I had burned 4 Recovery DVD's, as soon as the OS was operational. The first recovery DVD booted OK. However, the system would not recognize any of the 3 other recovery DVD, displaying a message such as wrong disk inserted or something similar. Imagine if in a few months I had needed to use these recovery DVD that I had burned; they were completely useless and I would have nothing to recover with. Very scary !
- I explained the problem to Lenovo Support and they sent me within 3 days a set of 4 Rescue & Recovery DVD. By following the instructions, it took 2 hours to recover to a working system. The good: no Office or McAfee trial software came with this recovery. The bad: there was a 2 GB empty partition at the beginning of the HDD and 10 GB of unallocated space at the end of the disk. Why Lenovo would do this, I don't know; seems a bit sloppy to me. Also, I had to manually reconfigure everything, since there is no "just follow the instructions" as when configuring the "out-of-the-box" system. I had to install my own PDF viewer
(free open source PDF X-viewer http://www.docu-track.com/home/prod_user/PDF-XChange_Tools/pdfx_viewer), Adobe Flash, etc...
- the major problem in partitioning is the inability to shrink a partition (such as C) in order to free up space after to add extended partitions
(http://www.howtogeek.com/howto/windows-vista/working-around-windows-vistas-shrink-volume-inadequacy-...). There always seems to be VISTA unmovable files, MBR or something else. After reading numerous posts, I installed the trial version (30 days) of Raxco PerfectDisk Home edition in order to consolidate all the files to the front of the C: drive. A few iterations were required since the MBR seems to be placed in the middle of the partition. I was finally able to partition my HDD exactly as I wanted. I was so pleased with the efficiency and ease of use of PerfectDisk that I bought the Pro 10 version. Just wait for when the software is occasionally discounted. (http://www.perfectdisk.com/home)
VISTA User account setup:
I had created my E partition to store all user data of all accounts, since I would have multiple accounts on the computer. I also wanted to store all music and pictures in the Public folder on F partition. There are numerous methods described on the Internet, most of which seem too complicated. See http://joshmouch.wordpress.com/2007/04/07/change-user-profile-folder-location-in-vista/ and
http://www.vista4beginners.com/Move-user-files-folders-to-another-partition?page=1. I finally decided to do just 2 simple registry modifications described in the last post here
(http://superuser.com/questions/6391/moving-users-folder-on-windows-vista-seven-to-another-partition).
It worked for me but use at your own risk ! Just edit the 2 Registry keys and replace the C: drive by the one you need.
- I only had the Admin account created on the C: partition. Before creating any other user accounts, I modified the registry so that all new user accounts created would use my E partition.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList ProfilesDirectory = E:\Users
- I modified the registry so that the Public folder would be on my F partition.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList Public = F:\Public
Other notes of interest:
- I had been a long-time subscriber to the Fred Langa Langalist
(http://www.langa.com/backups/backups.htm). I now subscribe to the excellent Windows Secrets newsletter (http://www.windowssecrets.com/). The information provided is very useful.
- I had considered an inexpensive boot manager, partition manager and imaging software (BootIt Next Generation) highly recommended by Fred Langa
(http://www.terabyteunlimited.com/index.htm). But it seemed a bit like overkill for my needs. There is a fully-functioning trial version.
- I regularly consult a complete list of recommended free software on Gizmo's Freeware review (http://www.techsupportalert.com). One recommended free open source defragmenter which I did not use was MyDefrag (http://www.mydefrag.com/).
- download and install the latest version of the Lenovo System Tools (Toolbox). It is very easy to use and can troubleshoot all hardware problems. Search for MIGR-67520 on the Lenovo site.
- you can find Roxio DVD burning software on the Lenovo site (MIGR-72359 on the Lenovo site). I have not installed it yet.
- use the Lenovo System Update to keep your drivers up-to-date.
- for info on how to use switchable graphics, search on the Lenovo site for MIGR-70495.
- for tips on setting battery parameters, http://forum.notebookreview.com/showthread.php?t=320082
Recommendations to Lenovo:
- don't ship poor quality keyboards. You have too much to lose, for the small manufacturing savings.
- don't pre-install trial versions of Office or McAfee. This should be an option and not be forced onto buyers.
- at least ship the HDD with a 40 GB C primary partition and the rest as D: partition. This would make it easier for users who are not technical.
- if you are going to include an integrated camera, provide software to use it. Currently, I have no way of taking a picture or making a video without acquiring other software. The technique described here
(http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67413) does not work !
- provide some software to reduce the speed of the DVD drive when watching movies. The noise at the default maximum speed is very annoying.
Thinkpad T500 | Model 2081-CTO | Intel Core 2 Duo P8700 (2.53GHz, 1066MHz 3MB L2 Cache) | 4 GB PC3-8500 DDR3 RAM | 15.4" WSXGA+ | ATI Mobility Radeon 3650 (256MB) | 250GB Hitachi HDD (5400rpm) | Bluetooth 2.1 | Integrated Camera | DVD Recordable UltraBay Slim | Intel Wifi Link 5100 | Sony 6-cell Li-Ion battery | Vista Home Premium 32-bit SP1

people complaining about problems installing an office over another office are (dare i say it) stupid. it makes absolutely no sense installing one over the trial version. just uninstall the trial and you'll be fine. every single time.
as for problem with uninstalling mcafee (or any other antivirus, for that matter, just download the uninstaller from the software company e.g. http://service.mcafee.com/FAQDocument.aspx?id=TS100507 for mcafee.
that said i believe you get to choose if you want mcafee and/or office when you go through the inital boot, the "on-screen instructions"
you can slow down the odd via power manager
and thanks for the tips on changing the reg to have the user profiles somewhere else!
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

SAP PI 7.3 - initial setup Configuration wizard

Hi Experts,
While running the initial setup Configuration wizard.,facing the following issue.
Thanks in advance
Exception Class: com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException
Exception Message: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
Stack Trace
com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
     at com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault.execute(InvokeServiceControllerDefault.java:144)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessExecuter.run(ProcessExecuter.java:156)
     at java.lang.Thread.run(Thread.java:679)
Caused by: com.sap.tc.lm.ctc.cul.api.CULServiceException: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
     at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:61)
     at com.sap.tc.lm.ctc.cul.serviceimpl.executor.CULServiceExecutor.executeService(CULServiceExecutor.java:36)
     at com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault.execute(InvokeServiceControllerDefault.java:133)
     ... 18 more
Caused by: com.sap.tc.lm.ctc.provider.abapconfiguration.exceptions.CPIServiceExecutionException: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
     at com.sap.tc.lm.ctc.provider.abapconfiguration.JCOServiceExecuter.executeService(JCOServiceExecuter.java:107)
     at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:59)
     ... 20 more
Caused by: com.sap.tc.lm.ctc.provider.abapconfiguration.exceptions.AbapConfigurationProviderBaseException: Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.
     at com.sap.tc.lm.ctc.provider.abapconfiguration.connector.JCOServiceConnector.getFunction(JCOServiceConnector.java:97)
     at com.sap.tc.lm.ctc.provider.abapconfiguration.JCOServiceExecuter.executeService(JCOServiceExecuter.java:98)
     ... 21 more

Hello Vijay,
Please check user DDIC in client 000 - ensure that it exists, not locked and has the same password as in Integration Server client.
Regards,
Vadim

Initial setup on mac mini server without monitor?

I have bought a mac mini lion server today. I do not have desktops in home, so no monitors.
How can I setup/login into it? I tried Server Admin Tools, but I do not have root password (tried blank and serial number).

I have a MBA late 2010. So, no thunderbolt.
I was hoping connect to it using ssh to execute initial setup to be abble to use remote admin tool.
The problem is that ssh do not accept root connection.
Since I do not have any display at all, the idea would be to turn the server on and setup it. Since it is a server I thought I could do this without any issue.
Linc. In your idea. How should I start mac mini in disk mode and how can I boot the MBA using mini internal drive?
Any ideas?

Initial Setup Problem - Starting the SLD Registration process

Hi,
we are installing our PI development system. During initial configuration with "NWA --> Configuration Management --> Scenarios --> Configuration Wizard --> Netweaver initial setup" the wizard stands still at Step 68 (of 561) "Starting the SLD Registration process".
We have restarted the system but after starting again the wizard it stands still again.
Same problem on our PI quality assurance system.
PI 7.11 on Windows 2008 R2 with MSSQL 2008 R2.
Steps of installation:
1) Installation of PI 7.11
2) Postworks ABAP (License, TMS, Profiles, rz04, ...)
3) Kernelupdate to 106
4) Updates SPS7 ABAP
5) Updates SPS7 JAVA
6) Run NWA Initial Setup with J2EE_ADMIN
Could someone help?
Thanks
Regards
Thomas Mühl

Then possibly the password was set wrong somewhere (since the "-" character is not blocked). Its advisable to check all service users passwords, to prevent other issues like this one to occur. Please check the OSS note "999962 - PI 7.10: Change passwords of PI service users" for more information on this.

Error during Initial setup of functional unit Development Infrastructure

Dear All,
During the template installation of DI all-in-one (Initial setup of functional unit Development Infrastructure (DI all-in-one)) I get an error at Step 64/96 Upload Default ACL Settings.
Error: not a valid URL: unexpected character found [':' at position 7]
Step: Upload Default ACL Settings
Does anyone know how to fix this issue?
Kind regards,
Joost Christenhusz

Hi Lee,
I think I know how to solve this. I have just solved a similar problem with my PI 7.1 EHP1. Deployment in JSPM of various software components all failed like this example:
JSPM log:
Deploy status is 'Aborted'
Client path '
pi71\sapmnt\trans\EPS\in\SAPXIAF04_7-20002649.SCA'
Description:'1. ERROR CODE DPL.DS.5089 Exception during generating components of sap.com/com.sap.aii.af.app application in webservices_container container.
-> com.sap.engine.services.webservices.espbase.configuration.BindingData.getConfigurationType()I'.
Default Trace:
Caused by: java.lang.NoSuchMethodError: com.sap.engine.services.webservices.espbase.configuration.BindingData.getConfigurationType()I
at com.sap.engine.services.webservices.server.deploy.WSBaseAbstractDProcess.getBindingDataId
After that most of the browser based admin apps, such as NetWeaver Administrator ( /nwa ), would refuse to start.
But finally after several tests, searching on SDN+SMP and restore to backup version I found the solution in [SAP Note 1328776|http://service.sap.com/sap/support/notes/1328776] which describes a similar problem: Update to the newest version of ENGINEAPI 7.11. Today this is ENGINEAPI04P_4-20002603.SCA.
You may also want to make sure that you are running the newest version of the Configuration Wizard, so you should check/update LMTOOLS, LMCTC and LMCFG*, currently LMTOOLS04P_3-20002705.SCA, LMCTC04P_1-20002694.SCA and LMCFG04P_4-20002729.SCA.
I hope this proves to be useful.
regards
Mauri

Recently in the Bahamas where I helped a friend with his new iPad. We could not find Bahamas in initial setup so we used United States and could not enter Visa/MC billing address in Bahamas. iTunes rejected, billing info is not what's on file. What to do?

Recently in the Bahamas where I helped a friend with his new iPad. We could not find Bahamas in initial setup so we used United States and could not enter Visa/MC billing address in Bahamas. iTunes rejected, billing info is not what's on file. What to do?

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Initial setup of functional unit Development Infrastructure (DI all-in-one)

SDN Team,
When we login in into NWA
In deploy and change tab we find 9 wizards.
But i could not see below wizard for NWDI configuration
Initial setup of functional unit Development Infrastructure (DI all-in-one).
Please let me know their are any prerquisities to be done??
Thanks
Srikanth

ideally you should not use NWDI as an Add in, it is not a recommended scenario.
For problem shooting this I would look in the Server0 directory for the RFC trace file which should show you what the issue is.
If not I would then log onto the ABAP system with NWDI down, go to SM50 and increate the trace level of all DIA Wp's but only have the Security component ticked... then I would start up the J2EE and after it has failed to connect I would look through the trace files (after turning off tracing) looking for the word sapjsf. That should tell you exactly why it is failing.
hopefully the sysnr below of $$ was just a typo.
Ensure it is client 001 that you have changed the sapjsf password in (a common error)

Initial Setup: Apple TV 3 Can't Connect to Server

Hi All-
Just bought a new Apple TV (2012) and in the initial setup it tries to connect to the iTunes store when attempting to turn on Home Sharing, but it comes back with an error message "Unable to Sign In. Apple TV can't connect to the server at this time. Please try later." I've been trying for two days to no avail.
I have a TIme Capsule for my wifi network. I've also tried connecting via wired ethernet, also no luck. I've tried resetting the Apple TV, unplugging & replugging it, restarting my Time Capsule, and I've turned off my firewall. I've also tried restoring the Apple TV, but this also generates a "Can't restore at this time. Please try later" error message.
I've read through other threads that address people's trouble with Home Sharing. They seem to still have access to Netflix, etc. I don't. I only have two options on the home screen "Computers" and "Settings."
Any help would be appreciated.

I would try changing your store location under the settings menu. For indivduals outside the US, change the store location has resolved the "two options" problem. Which is not really your issue, but it worth a shot since you have tried all the standard procedures. OS 5.0 is buggy software and a step backwards on Apple part. I would also update iTunes to 10.6.1 if you haven't already.
http://support.apple.com/kb/DL1426?viewlocale=en_US&locale=en_US

KDL60W630b - software update check and region check - failing everytime and tv going into initial setup mode

KDL60W630b - software update check and region check - failing everytime and tv going into initial setup mode I got this today today and when i tried to complete initial set-up. it never completed. TV is going in cycles with initial set-up everytime it connects to my internet and says connected successfully. after it tries to update software and tv restartssame initial set-up screen again i tried keypad button on remote and it took me to tv. i was able to see tv that way but whenever i start tv, it goes back into initial set-up again. any solution for this?

Hi GC_Sugarland,
Thank you for considering Sony Community!
I'm sorry to hear that this happens to your TV after the update. Pleas reset your the TV to the original setting. click on this link to guide you on how to reset it.
I hope this helps. Please keep me posted.
Regards,
Jen
If my post answers your question, please mark it as "Accept as Solution"

PLE / PLW400 Initial Setup Issues.

Similar Messages

Maybe you are looking for