Plead for help! - Sorry about me and being computer challenged!

Hello Everyone,
I am sure you get these types of posts often, and I sifted through a couple of topic pages to see if my question was among them, but didn't see anything. So, and sorry, and please bare with me here. Also, just a warning but I am kinda computer challenged grins High tech gagets are sometimes beyond me! sigh -and here I am with an ipod! LOL!
I have an IPOD mini, and have finally got everyone working on it except geting my ACTUAL music on there. Sounds dumb really but here is the kicker. I want (if it is possible) to transfer the music I have from Limewire, onto my IPOD mini(or at least the Ipod page that comes up so I can put it into my ipod from there) Now I have heard that it is possible, but I am not sure. And I have done all the help intructions, tutorials and such and still I am blank.
I would really appericate any help! Thank you!
Windows XP

Topics and posts that discuss the use of Limewire are either locked or removed by the Moderators because such posts are against the forum Terms of Use (using Limewire to download copyrighted material is illegal).
Such is the seriousness with which such posts are regarded here by the Mods, that posters privileges may be suspended as a result.
So hopefully you'll understand why we cannot help you with this.

Similar Messages

Plz help me about clustering and loadbalancing

hi all
plz help me about clustering and loadbalancing
how to do clustering and loadbalancing in tomcat ?

I used Grid Bag Layout for allignment of all buttons and textfields.Use multiple different nested layout managers to get the desired layout.
Give it another try.
If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

What's the phone number I should call for help with my iPhone and ihome dock?

What's the phone number I should call for help with my iPhone and ihome dock?

http://www.ihomeaudio.com/support/

Transaction code to learn for sample codes about trees and containers

trnasaction code to learn for sample codes about trees and containers

hi check this....,
REPORT Ztree_TEST_PGM.
Type-pools : fibs,stree.
data : t_node type snodetext.
data : node_tab like t_node occurs 0 with header line.
clear : node_tab, node_tab[].
node_tab-type = 'T'.
node_tab-name = 'Earth'.
node_tab-tlevel = '01'.
node_tab-nlength = '5'.
node_tab-color = '4'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 3.
append node_tab.
clear node_tab.
node_tab-type = 'P'.
node_tab-name = 'Europe'.
node_tab-tlevel = '02'.
node_tab-nlength = '6'.
node_tab-color = '1'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 4.
append node_tab.
clear node_tab.
node_tab-type = 'P'.
node_tab-name = 'Germany'.
node_tab-tlevel = '03'.
node_tab-nlength = '7'.
node_tab-color = '4'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 4.
append node_tab.
clear node_tab.
node_tab-type = 'P'.
node_tab-name = 'Berlin'.
node_tab-tlevel = '04'.
node_tab-nlength = '6'.
node_tab-color = '4'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 3.
append node_tab.
clear node_tab.
node_tab-type = 'P'.
node_tab-name = 'Asia'.
node_tab-tlevel = '02'.
node_tab-nlength = '4'.
node_tab-color = '1'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 3.
append node_tab.
clear node_tab.
node_tab-type = 'P'.
node_tab-name = 'India'.
node_tab-tlevel = '03-'.
node_tab-nlength = '5'.
node_tab-color = '1'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 3.
append node_tab.
clear node_tab.
node_tab-type = 'P'.
node_tab-name = 'Bombay'.
node_tab-tlevel = '04-'.
node_tab-nlength = '6'.
node_tab-color = '1'.
node_tab-text = 'Hello'.
node_tab-tlength ='5'.
node_tab-tcolor = 3.
append node_tab.
clear node_tab.
CALL FUNCTION 'RS_TREE_CONSTRUCT'
TABLES
    NODETAB                  = node_tab .
DATA: type_mapping TYPE stree_ctl_type_mapping_tab.
DATA: wa_type TYPE stree_ctl_type_mapping.
CLEAR: type_mapping[].
    wa_type-type = 'A'.
    wa_type-icon = '@BL@'.
    APPEND wa_type TO type_mapping.
CALL FUNCTION 'RS_TREE_LIST_DISPLAY'
EXPORTING
   USE_CONTROL                     = 'L'.
A list of other function modules that can also be used to construct tree reports:
SEUT,                            Hierarchy framework
RS_TREE_ADD_NODE                 Insert nodes
RS_TREE_AUTOMATIC_REFRESH
RS_TREE_COMPRESS                 Hide subtree(s)
RS_TREE_CONSTRUCT                Construct new hierarchy or insert subtree
RS_TREE_CONTROL_PREPARE
RS_TREE_CREATE                   Create hierarchy
RS_TREE_DELETE_NODE              Delete node with associated sub-tree
RS_TREE_EXPAND                   Expand subtree
RS_TREE_GET_CURRENT_LAYOUT       Get layout information for displayed hierarchy
RS_TREE_GET_CURRENT_NODE         Get node at which cursor is positioned
RS_TREE_GET_CURRENT_ROOT         Get current root node
RS_TREE_GET_CURRENT_TREE         Get structure information for displayed hierarchy
RS_TREE_GET_INPUT                Get entires from input fields
RS_TREE_GET_MARKED_NODES         Get selected nodes
RS_TREE_GET_MODIFICATION_LOG     Get change log for hierarchy
RS_TREE_GET_NODE                 Get nodes for specified ID
RS_TREE_GET_NODE_BY_NAME         Get node for specified node name
RS_TREE_GET_PREDECESSOR          Get preceding node
RS_TREE_GET_SEARCHSTRING         Get last search strinng
RS_TREE_LIST                     Simulate hierarchy or subtree display
RS_TREE_LIST_DISPLAY             Display hierarchy
RS_TREE_LIST_DISPLAY             Display hierarchy
RS_TREE_MODIFY_NODE
RS_TREE_MOVE                     Reassign node with subtree
RS_TREE_POP                      Get hierarchy from the stack and restore
RS_TREE_PUSH                     Place hierarchy on the stack
RS_TREE_RESET_LOCK               Deselect node
RS_TREE_SET_CURRENT_LAYOUT       Set layout with marked cursor position
RS_TREE_SET_CURRENT_TREE         Set other hierarchy
RS_TREE_SET_LOCK                 Select node
RS_TREE_SET_NODE                 Change Nodes
RS_TREE_SET_SCROLL_POS           Position node at the beginning of the page
RS_TREE_SLEEP
RS_TREE_SORT_CHILDREN
regards,
venkat.

Your system of contact for help is very rigid and complecated : Hallo, you are charging me twice every month for the Adobe Creative Cloud, please, please cancel one!!!!! Hauke

Your system of contact for help is very rigid and complecated : Hallo, you are charging me twice every month for the Adobe Creative Cloud, please, please cancel one!!!!! Hauke
Message was edited by: Hauke Juergens : Your system of contact for help is very rigid and complecated : Hallo, you are charging me twice every month for the Adobe Creative Cloud, please, please cancel one!!!!! Hauke

Posting here is not going to help you. This is a user to user forum. No one here has any ability to manage your account.
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

Signed up on furefox desktop 2/2. No problem. Today password not accepted. Asked for help 3 hrs ago and never got email and nit in spam

Was sucesssful signing up and using firefox on desktop yesterday. Today user name and or password not accepted. Can't get emails-nothing. Asked for help with password and never got email. This was 3 hrs ago and not in spam folder

Password for what? Signing up for what?
Firefox doesn't need a password for a person to be able to use it.
Firefox shouldn't affect your ability to get email - Firefox doesn't do email, but it will allow you to access your web-mail service.

HT201303 How can you tell which devices used the Apple ID? For example: "twoPads, 2 iPhones and 1 computer used your Apple ID ?"

I believe my kid gave somebody my password to download something. And I want to know who? Can it say For example: "2 iPads, 2 iPhones and 1 computer used your Apple ID ?"

Only if they went to the trouble of setting their device up as a "Managed Device" on your ID.
Change your password.

Laptop-Vista-Moz Fifx won't work-says something about proxy server? Computer Challenged so I don't understand.

I am computer challenged so I don't understand this. When I try to download Mozilla Firefox on my laptop it tells me that firefox uses a proxy server and won't complete the download. I don't like IE, and do like Mozilla Firefox and have used it for a long time on my desk top. If someone could tell me what to do to make it work I really would appreciate this.
This is on a laptop, not this computer

Are you trying to do this while on a corporate wifi or over home wifi/cellular?

Need help asap about point and shoot for inside

trying to take pictures for auction listings, don'thave a lot of experience. have been told about canon powershot and panasonic lumix - could you tell me what will be the easiest for me to use and give me the best inside pictures of objects to list - thanks!!!!

The key to getting a good picture is to make sure that you can control the light and less about the exact camera as long as you do not purchase any junk.
For auction images, you should invest in a small light box setup with multiple strobes/flashes that illuminte the item properly. In order to do this, then you should get an inexpensive SLR. You should also get a small tripod and remote shutter release that will allow you to make correctly focus pictures.
Currently, Nikon and Canon are head to head when it comes to image quality with Nikon edging out Canon since they have recently introduced some really great lenses. Sony is doing OK, but remember Canon and Nikon own 90 % of the camera market and the other 10% is left to everyone else. Sony is having some problems with ISO images that contain a lot more noise than Canon or Nikon.
Check out www.dpreview.com and www.luminous-landscape.com for reviews by photographers.
I do not work for Best Buy and am not affiliated with them in any way. I like HT and want to help people improve their HT experience. "There is a LOT more than just having a TV to make a home theater"

Help me about C1E and EIST

hi..why i can't find the C1E and EIST settings in bios in my MSI 6788 865PE Neo2-V board..i just really want to see my processor in full speed..please help me, sorry for my bad english.

Please stop bumping this thread, it will not get you help any faster and is against forum rules. 2 bumps in 1/2 hour,
>> Please read and comply with the Forum Rules <<

Pleading for help: Fireworks CS4 wont start in Snow Leopard

Hi there -
I'm really hoping that someone can help me here.
I've recently paid out (what to me is) a huge amount of money for the Adobe Design Premium software, but Fireworks which I use most frequently won't start. It simply says "Fireworks won't run - An internal error has occured".
I've searched forums and the web for an answer but to no avail and tried reinstalling it on a number of occasions
Could someone, anyone, at all please help me?
I have the latest update for fireworks (10.0.3.11) and mac os x version 10.6.2 on my macbook pro.
I'd be hugely grateful for any help or support you can give me.
Thanks so much in advance
Steve

This is weird I just noticed your post on my email alert form Adobe.
A client emailed me yesterday saying their site was not working right using Snow Leopard.
Their site has a bit of Flash in it and I was just reading many problems with Snow Leopard.
Can't help you here, sorry, but just beginning to this is there something up with the latest version of Snow Leopard?
Hope you get this sorted. P.

Ask for help with LabView Daq and Tek VX4244 VX4101

I use NI VIO-MXI-64XE-10, Tek VX4101 and Tek VX4244 to acquire data in one
Tek 1410A VXI mainframe connected a PII 350/64M computer with MXI2
cable.these modules are used for three independent applications,the datum
are acquired and through preliminary computation, then sent to three TCP/IP
ports the computer served in real time. the burden of the system will be
very heavy because the 64XE-10 need to use up the 100K sample rate
continuously dealed by 50 channels,and the VX4244 need about 30Hz for all 16
channels.
64XE-10 is easily detected by NI software, and I can use LabView Daq
intermediate analog input VIs to acquire data in background, read 50 samples
and compute the mean for each channel,then packa
ge the 50 mean and send to
client end with 40 times a second. I found the speed is satisfactory.
As for VX4244 and VX4101,I can't use LabView Daq VIs,and the driving
functions for LabView with the product are difficult to understand, I want
to know how I can get data and send out efficiently,how to get data in
background,and how to use FDC ?
And for 64XE-10, although the speed is satisfactory, but it use much more
CPU resource, I want to use advanced analog input VIs to build the code,I
want to know where I can find examples using the advanced analog input VIs ?
Best Regards

I use NI VIO-MXI-64XE-10, Tek VX4101 and Tek VX4244 to acquire data in one
Tek 1410A VXI mainframe connected a PII 350/64M computer with MXI2
cable.these modules are used for three independent applications,the datum
are acquired and through preliminary computation, then sent to three TCP/IP
ports the computer served in real time. the burden of the system will be
very heavy because the 64XE-10 need to use up the 100K sample rate
continuously dealed by 50 channels,and the VX4244 need about 30Hz for all 16
channels.
64XE-10 is easily detected by NI software, and I can use LabView Daq
intermediate analog input VIs to acquire data in background, read 50 samples
and compute the mean for each channel,then packa
ge the 50 mean and send to
client end with 40 times a second. I found the speed is satisfactory.
As for VX4244 and VX4101,I can't use LabView Daq VIs,and the driving
functions for LabView with the product are difficult to understand, I want
to know how I can get data and send out efficiently,how to get data in
background,and how to use FDC ?
And for 64XE-10, although the speed is satisfactory, but it use much more
CPU resource, I want to use advanced analog input VIs to build the code,I
want to know where I can find examples using the advanced analog input VIs ?
Best Regards

Help me about Indexes and Exchange rate

I see in SAP B1 have form Exchange rates and Indexes. I don't know mean of Index. What does it use for? And Exchange rates relate to Indexes. I can't understand. Can you help me.

Hello Tien,
You are clever. There are also some member forums could not know how benefit the helpfiles for them and a certain member in this forum is called forum point seeker, take this as an opportunity.
Indexes in SAP B1 are used to define consumer price index (CPI). h
ere is the definition :
The Consumer Price Index (CPI) measures inflation as experienced by consumers in their day-to-day living expenses. (It is sometimes referred to as the retail price index.) There are separate indexes for two groups or populations of consumers:
The CPI for All Urban Consumers (CPI-U) is the index most often reported by the national media.
The CPI for Urban Wage Earners and Clerical Workers (CPI-W) is the index most often used for wage escalation agreements.
The CPI inflation calculator allows customers to calculate the value of current dollars in an earlier period, or to calculate the current value of dollar amounts from years ago.
Consumer price indexes often are used to escalate or adjust payments for rents, wages, alimony, child support and other obligations that may be affected by changes in the cost of living. There is a fact sheet explaining how to use the CPI for escalating contracts.
A new price index called the Chained Consumer Price Index (C-CPI-U) is now available. This new measure is designed to be a closer approximation to a "cost-of-living" index than the CPI-U or CPI-W.
Based on that definition, we could obtain it as data when determining exchange rate in daily business or price of the inventory items
Rgds,
JM

Help me about Airport and a Dealer information

AirPort can be use in Bangladesh or not? And there is a so called dealer in Bangladesh , who pretending themselves as a authorized dealer of Apple. I want to be sure about them before I made a purchase with them. The dealer link is : http://www.computersourcebd.com/ .please guys help with the infos. (Peace)

huz9in wrote:
AirPort can be use in Bangladesh or not?
Yes.
Use this site to find Apple Authorised Resellers in Bangladesh: https://locate.apple.com/bd/en/

Help me about file and array

hi
I need read a file into an array and write a new file from that array.
for example I read photo.gif into an array (array[ ]) and I write
newphoto.gif from that array (array[ ] )

Your read(cleartext) method may or may not read the whole of the file at one time. The value returned by the read is the number of bytes actually read and may not be all the bytes in the file. So the answer is that you can't reliably use your code though it may work most of the time.
Did you read my comment about reading the whole of a file into memory at one time? Did you bother to look at the reference I posted?
Message was edited by:
sabre150

Plead for help! - Sorry about me and being computer challenged!

Similar Messages

Maybe you are looking for