Please advice about my fingerprint

Hi every one
please help me 
i installed new windows xp pro SP2 on my laptop 3000 N100
before installing the drivers i can find the fingerprinte sensor not installed  then
i install the driver for it
it changed to be "AuthenTec Inc AES2501" in the Unversal Serial Bus controllers
tell now every thing should be okay
but when i install ThinkVantage ver 5.6.2  it says that no sensor recognized
is there something missed in my steps  ??
is there any messing software i didnt install ??
is there update for the USB ports to make the thinkvantage software able to sense my fingerprint sensor ??
please any one face this problem before to advice me ASAP really i'm in trouble
thanks
Message Edited by mohammedabdou on 02-16-2008 05:33 AM

mohammedabdou,
The ThinkVantage Fingerprint Software will not function with your 3000 N100 notebook system. It will work only with the following hardware (as listed in the supported hardware section):
ThinkPad systems with integrated fingerprint reader
Lenovo USB fingerprint keyboard
Lenovo USB fingerprint reader (part number 73P4774)
It looks like you already installed the correct drivers, under Windows XP you would need 61fp02ww.exe. These drivers, however, only give you part of what you need. You also need to have software installed that will make use of the fingerprint sensor. Your system came with Softex OmniPass software as part of the preloaded software. If you have removed the preloaded operating system and software, you will need to restore the original preload using Recovery CDs or purchase software similar to Softex OmniPass Client Edition.
We hope this helps.
The Lenovo Support Web team

Similar Messages

  • Please advice about fast reading/writing

    Hi All,
    I am building a custom system for Photoshop CS6 and Lightroom 4, I know this is not a PS forum but I think the hardware experts are here.
    The components I have already selected are:
    i7-3930k
    ASUS P9X79 PRO
    64GB RAM (GSKILL)
    WD Caviar Black 1TB
    Since I have enough RAM the scratch disk is not something to worry about, after reading this article about SSDs for PS:
    http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html#main_Solid _state_disks
    I think a SSD is useful only when starting the applications (having them in the SSD), which is not important for me (I do it twice or three times per day). What I would like to do (and is the matter of this post) is to open and save my large pictures (700MB to 1+ GB) as kickly as posibble, is the Caviar Black a good choice or should I consider a SSD? What about a WD velociraptor? Also, I would appreciate advice about other options.
    The last custom build I did was probably 8 years ago so I am not up to date with the hardware technology, I have learned a lot reading this great forum :-).
    Thank you,
    William Gonzales

    William,
    I use Photoshop CS5 and Bridge a lot and care particularly about how fast the PC can read since this dramatically impacts how fast you can process and rank lots of shots.
    Bottom line...
    Suggest in addition to whatever your boot drive is you configure a 2xRAID 0 7200rpm drive setup for your data. You have an extremely capable CPU and lots of RAM, so your disk speed is definitely a bottleneck.
    Another alternative, although more expensive and quite a bit smaller would be one of the latest, fastest SSDs that can finally deliver on the write side. (i.e. Samsung 840 Pro and its competitors). This would be a secondary drive to whatever you have for your boot drive.
    Another suggestion, is make sure you have a video card with good 2D speed. That is get one that can move lots of data; this spec. (Memory Bandwidth, often in GB/sec) is often buried since gaming and 3D features (cores, shading, memory size, etc.) are most important for most users. My video card, a GTX 480 has a memory bandwidth of 177.4 GB/sec, but probably any card with at least 80 GB/sec will probably work very well with your apps.
    Regards,
    Jim

  • Please advice about table partitioning

    Hi.
    I need some advice on table partitioning. Here is the problem : My application procesess 7 types of documents (all like invoices). I have created master/detail tables for each type of document. But the are no big difrences between documents, so I was planing to move all of this document types to one master and one detail table and use table partitioning based od document type. This would to simplifay my programming very much... but I am not sure how will this effect on application performance ??? We process a large number of documents (over 300 a day).
    So what do you think ?

    1) If you are using the standard edition, partitioning is not an option. Partitioning is an extra-cost licensing option that is only available to enterprise edition customers.
    2) I am having a bit of difficulty reconciling the numbers you are providing with your descriptions. An application that inserts 5 MB of data a day and adds fewer than 2 million rows per year is a pretty small database, particularly to consider partitioning for. 50 active users doesn't seem terribly large. It is far from obvious to me that separate schemas by year provides any sort of benefit overall. OLTP operations should be able to use appropriate indexes to avoid all the read-only data. And a single schema with a single set of tables minimizes the number of hard parses you have to do, the number of queries that have to be rewritten every year to go after new schemas of data, etc
    Justin

  • Please give me advice about....what is the best virus guard in store and is virus worked in iPhone (my English is not good sorry)

    Please give me advice about....what is the best virus guard in store and is virus worked in iPhone (my English is not good sorry)

    If you are gettin spammed via e-mail or text that your IOS has a virus (usually says call some 800 number) then these are a scam - do NOT contact these crooks

  • Advice about using the laptop with closed lid while connected to external display

    Hello all HP forum members!
    I have an ENVY 17 with Win8.1 64bit, a great laptop, but I need an advice about using it while connected via HDMI cable to an external display (TV).
    When I play heavy 3D games, the computer produces more heat than usual (of course this is normal), but doing so with closed lid, could this harm the  display in some way, as a result of the heat?
    Thanks!

    Hi @VVel ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 17 Notebook and issue with keeping the Notebook on while closing the lid. Here is a document on changing the Power option.
    Control Panel - Power Options - upper left - Choose what closing the lid does.
    Change Plan Settings and also check Advanced Settings. Make sure you do this for both battery and power.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Containers in practice � please advice

    Hello forum users,
    I am finishing computer science studies this year and I need to create thesis. I�m interested in Solaris containers and would like to describe this technology. I want to create a project that uses containers to do �something useful� and provide some functionality, not only shows how to create zones and assign resources.
    I have an Ultra 10 with Ultra Sparc IIi 300MHz CPU , 512 MB RAM and 20 GB HDD available. Does someone have any idea how to show practical use of containers on such machine?
    Other solution I think about is just to design containers without implementation, so I would not need any hardware. But Unfortunately I do not have administration experience to decide about resource allocation.
    Could you please advice if you have any ideas about using containers on Ultra 10, or if you can provide any suggestions for using Containers in practice.
    Many thanks,
    Adam

    Ah, the joys of a senior thesis...
    First, I hope you have a faculty adviser who's on-board with your plan -- it will make things must easier and they can provide a lot of guidance about how to proceed and what to work on.
    As for zones, I would probably look at doing a work that is mostly theoretical (though you'll need to do some real world work to get enough experience to be able to write this with any sort of authority). I'd aim for a piece on where zones came from (eg. BSD chroot jails with a smattering of java sand boxes and VM's in general) and what they gained and what they lost in that process (maybe even a bit on how much of the OS they had to touch/modify to support it -- eg. the scope of work). If you've got any contacts who can introduce you to any of the key players in zone development (again, where your faculty adviser comes in handy) you might include some interview material, but I'd wait till you understand the technology very well before you go that route so you can ask good, meaningful questions.
    If you want something more "down to earth" (if zones can ever be described that way...) then I'd probably pick a common task that computers do (web/application serving, databases, etc. -- whatever you might have some background in already) then describe your implementation of that in a zone, what challenges it presented, limitations and advantages it has. For example: we're very interested in the possibility of giving DBA's root access to their own zone (probably just in development) so they can take care of day-to-day root.sh runs on Oracle and such but we know there's going to be lots work in management of resources that will fall to the admin group which makes us less excited...
    Best of luck!

  • How can I add links to open xml and csv files stored in another location? Please advice how to place links in my frame maker document?

    Hi,
    I would like to know as to how can I add links to open xml and csv files stored in another location? Please advice how to place links in my frame maker document?
    Kindly advice.
    Thanks
    Priya

    Special > Hypertext > Command "open document" will do its best to open the target document inside FrameMaker, which may not be much help; Special > Hypertext > Command "message …" will use the application you specify. The user guide for 7.0 says this about absolute links, and I don't think anything has changed since:
    For example, to start PaintBrush and open the Ship.pcx file on drive C you would use the command message system pbrush.exe C:/Ship.pcx
    I've not often used a relative link, and not recently: the same source says
    folder levels are separated by a slash / even in Windows and Mac
    [relative links] FrameMaker searches for a relative pathname beginning in the folder that contains the current document
    [absolute links] FrameMaker searches for an absolute pathname beginning at the top of the file system. In Windows, the absolute pathname begins with the drive specifier, a colon and a slash.

  • Need advice about best characterset for XMLDB

    Hi,
    Oracle 9.2.0.5 Windows 2000
    Please, give me an advice about best character set
    configuration for XML DB.
    During installation Oracle istallator suggests
    charset =AL32UTF8 for multilingual data and ncharset=
    AL16UTF16.
    Is it good settings for database, which will be
    used for usual multilingual data and XML DB ?
    Thanks,
    Viacheslav

    Yes, we strongly recommend the use of AL32UTF8 for XML DB.

  • I need advice about being part of the Twitter Army of Awesome Help

    I am grateful for the fact of Mozilla and I use Twitter a lot.
    Although I am not technically competent, I do have experience of using Mozilla and Thunderbird for quite some years and am willing to share my experience.
    I obviously do not want to make matters worse for questioners and need some advice about how to begin.
    Is there a Forum where Folk such as me can share experiences of answering Tweets and also just be given examples how the system works, please, or might it be better for me to resign before I start rather than cause complications for anyone?

    Thanks - I hope to have a check there, when I have more time, meanwhile I see that separately I have been sent an email asking for my experience etc.. -
    I plan to attend to that when I am less pressed for time, it may not be for some while though - my spirit is willing but resources few, but if I just learn to do some small things it spreads the load - and I guess I have made a very small start - I have wondered about it for years but that Awesome Tweet was the prompt that got me this far!

  • Advice about design required

    Hello all,
    I am new with OA Framework development. I have read the Oracle tutorials, but I still have many questions about a best way to design the application. For example we have a fully customized module, kind of Mini MRP, which recommends purchase or sale back stocks of items between 10 different inventory organizations.
    Each item has attributes which affect the stock level and reorder point, some of attributes defined on master organization level and others on specific inventory organization level. In addition the are table which contains on hand of item in each organization (mtl_onhand_qty) and table which contains history of usages of the item in each organization. Also item can have previous versions and planning done for whole family ( the item and all it's previous versions)
    Now what I need to develop is a screen: user enters an item - and in left frame displayed the tree of family of item, in other frame there is a table of all 10 organizations when the columns are stock of the item in each org, usage of the item in each org,ROP etc.
    My question is : how to design entity objects for application like this?
    Should I create entity object for Item and another object for item in organization and another one stock of item in organization and for usage etc and to base view objects on those EO, or alternatively another approach - to create one huge view which will contain all the relevant data about the item in organzation ( stock,usage, attributes etc) and to base my EO and VO on this view? Please advice which approach is prefferable....
    Sorry for long post :-)
    Any help appreciated.
    Thank you

    I fully agree with what Tapash said, in case of external joins if EOs, even the code given in dev guide does not work....(Tapash correct me if I m wrong...! i remembered struggling with that code.... long time back, I m not sure of they have corrected it in 12i dev guide.) .
    But the logic has to be understood that framework understand it to be a update operation instead of insert opeartion ..for the table which does not have the joining key record and joined with external join.
    So this concept has to be implemented accordingly. I had scenarios where the query has to had external joins of EOs... so i made VOs based on sinle EOs and joined through VLs instead of going with external join of EOs in VO query, that worked fine.
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Advice about an external DVD drive

    Hi there,
    Pardon the basic questions, a computer genius I am not.
    I have a rather elderly iMac G4 running 10.4.11 and it has never been able to even see DVDs. I am facing necessary software upgrades which come in a DVD format. Is an external DVD drive what I get? Will my poor iMac see a DVD coming from an external drive? I have always found it annoying that I have the DVD player software but I can't use it.
    Note: if a solution contains advice about replacing my hard drive, please know that particular drama happened this summer when the original hard drive died. After much angst, my iMac is working well; I just need to be able to load software in a DVD format.
    thank you!
    suzy

    Yes an external DVD optical drive will work. The cost needs to be considered, is it worth it.
    You could opt to go the cheapest way possible; search Ebay on the PC side(since a high % are not as overall savvy as Mac users) look for the older Sony CDR burners, these were blue external enclosures which housed CDR burners. You can purchase modern DVDR player/burners cheaply now a days and install the optical drive into one of those Sony enclosures. The reason I suggest Sony is way back when they were expensive but well made and work to this day all the way to Leopard. You should be able to pick one up for $25.00 plus a good optical drive for less than $50.00
    BTW "necessary software upgrades" if you don't mind what are the upgrades and why only on DVD media? There are other ways to skin this cat.

  • Advice about switching to the mba

    Only recently moved from windows to a mac and I'm ready to go MBA already!
    I need some advice about the new MBA though please... Usually I look for reviews, youtube vids etc but can't find anything about the new MBA.
    I read stories about problems with the old MBA and wanted to hear from people that have the new version.
    I'm particularly worried about the stories of overheating and non-stop fan noises, taking ages to reboot etc (have these been rectified with the new MBA?).
    I currently have the 2ghz and it's pretty fast, love how quickly it switches on and off and I'd hate to loose that.
    Also, the MBA would become my main laptop as I couldn't possibly afford to keep both! Obviously I realise the MBA is not as powerful as the MacBook or the Pro but I'm not a heavy user, only mail, internet, youtube, itunes, ical, Office for Mac, some basic photo editing and rarely some light video editing.
    I would really appreciate any insight from current new MBA users, I know things are quite subjective (ie: I think my MacBook overheats very quickly but maybe to others this would be the norm) so I wouldn't bite your head off!
    sorry if this is the wrong place to post this... I couldn't find a more relevant category.

    I bought the 2nd generation MBA (released last November). I purposely held off on buying the first generation because of the complaints about the overheating etc. I follow a lot of Mac forums and can tell you that any problems you heard about have been resolved.
    There are always a few people that have issues with their machine - not matter what generation it is - but I would recommend the new versions to anybody that wants one.
    Fan noise is very subjective. I use my MBA a for Audio Recording and production - so my fan comes on pretty fast on mine - as the software I use maxes out the processor right from the start. And here is the best way I can sum it up:
    If I take the MBA with fan on into a dead quiet room - yes - I can hear the fan - and to me it sounds like blowing air out of your mouth to cool down hot food....
    If I take that MBA with the fan on into the kitchen where the fridge is running - I cannot hear the MBA anymore. Or if the dishwasher is on, or the clothes dryer etc.....
    I can only hear it is a dead quiet recording room. Subjective as it may be - it's perfectly acceptable to me.
    I have almost never had to restart my MBA - usually only when a software update requires it - I just sleep my machine. OSX is rock solid. my MBA takes 27 seconds to load - every time. If i do need to shut down - it takes like 2 or 3 seconds.
    I paid top dollar for mine when it was released and even though I could get it for $1000 cheaper now - I don't regret the money I spent. The solid MBA build and solid OSX are worth a lot to me.
    If there's any more questions just post them and I'd be happy to answer.

  • Citrix application does not launch in MAC using Firefox 2.0 and new version not compatible with MAC i am using.Please advice.

    I am unable to launch citrix application in MAC using firefox 2.0 and when we try to upgrade Firefox it gives a mssage that new version is not compatible with the MAC i am using.
    Please advice as to what can be done and the MAC i am using is a old one.

    We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
    #Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
    #Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
    [[Image:aboutcrashesFx29|width=520]]
    <br><br>
    Thank you for your help!
    More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

  • HT4623 hello team i m not finding the contact numbers back up in my computer after sync please advice

    hello team
    i am not finding the contact numbers in my computer after sync please advice me what is wrong
    my mobile EMI NO 01 202600 303635 8

    PhotogYogi wrote:
    I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
    By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
    Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

  • I was billed of £69.99 for nothing. would any one please advice me how to refund this?

    i was billed of £69.99 for nothing. would any one please advice me how to refund this?

    Check your purchase history to see what the charge was for.  If you did not purchase then:
    Change your password
    Alert your credit card company and ask them about reimbursement.
    Let itunes support know that your account may have been hacked.

Maybe you are looking for