Please Advise : Solution database

Hi group,
We are on the CRM 2007, i developed a small poc for the solution database and everything is working ok.
Now before going for a full fleged solution database creation i would like to know if the solution database can be transported.We are currently in the development server hence if it has to be created in quality and production as well then we better do it in quality itself.
Regards
Raj

please go thorugh the following link
http://www.sap-img.com/basis/transport-a-sap-object-from-dev-to-pro.htm
http://www.erphome.net/pdf/saezpdf/066saez.pdf
hope this helps

Similar Messages

Itunes crashes on windows 7 32 bit. please advise solution.

I have downloaded itunes with quick time sevral times using my eeepc running windows 7 starter which is a 32 bit system. After successful installation it crashes within seconds of openeing it. At times I get the message on compatibility and about older version of windows. On surfing I foumd tech support note suggesting unchecking the compatibility box. Even after doing it the problem does not get fixed.
Is the latest version of itunes 11 compatible with windows 7 starter 32 bit system. If not then it is a waste of time trying it.

Hello anjali,
I would recommend this article named iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues found here http://support.apple.com/kb/ts1717
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any inference with plug-ins or scripts not manufactured by Apple.
Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
If you see the same issue while iTunes is in Safe Mode, proceed to the Create a New User Account section below. If you do not experience the same issue, consult iTunes: Troubleshooting issues with third-party iTunes plug-insfor steps on how to remove third-party plug-ins.Create a New User AccountWhen troubleshooting a variety of issues, it can be useful to determine if the issue affects a specific Windows user account or all accounts. Follow the steps below to create a new user account in Windows Vista or Windows 7:
From the Start menu, choose Control Panel.
Open Add or remove user accounts (If using the Classic View in Windows Vista, open User Accounts. Then open Manage another account).
Select Create a new account and follow the instructions to complete the account setup process.
Once the new account is created, choose Log Off from the Start menu.
Log into the newly created user account.
Open iTunes and determine whether the issue you were experiencing persists in this new user.
If you see the same issue in the newly created user account, proceed to the System-wide troubleshootingsection below. If you do not experience the same issue, consult the User-specific troubleshooting section below.
User-specific troubleshooting
System-wide troubleshooting
Cheers,
Sterling

TS1424 Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404). I have researched this on Google and I have not read of any solution to this. Please advise.

Him
Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)." I have researched this on Google and I have not read of any solution. Please advise.

Here you go: http://support.apple.com/kb/HT1923
There are three steps so make sure you follow all of them. They are:
remove iTunes and everthing related to it
verify everything is really removed
reinstall iTunes.

Export/import to clone database -- please advise

Hi All,
Need help especially from exports that are strong in export/import.
can someone advise me how to use export/import to clone a database?
I know how to clone database using cold backup and hot backup.
But wish to know the full steps in using export/import to do cloning.
I'm going to do a full export on my "TEST" database, drop the database, create a database and import using the full export.
After doing a full database export, full=y. What are the steps to follow. Have a few doubts about it.
1) export the database (full=y)
2) drop the database
3) re-create the database, will be using the same name "TEST".
4) create the users (IDs created by DBA, eg: schemas), tablespace and datafiles. --> import doesn't do it right?
5) do a full import (full=y). In this step, will i encounter any problems? As in understand that all the oracle-owned objects (example SYSTEM, SYS, AUX) are already in the newly created database, will import full=y cause any problems?
6) do i have to re-create the roles, SYNONYMS and grant role,sys,obj privileges to IDs not created by oracle. (example schema owner)
in short i would like to know what EXPORT will export and not export
what IMPORT will import and not import.
Please advise.

Hi zetabouy,
thanks for ur input, definately helpful for me.
just to confirm. am i right to say that only a full database level (full=y) export/import will export/import out roles as well as public synonyms? because i have tried also exporting a user from the database, and imported that user into a different database, but public synonyms and roles were not imported.
one more question:
For example we are going to do port data from production to uat database using export and import for only the schema.
After exporting from production with such syntax (owner=OWNER01),
is is better to drop all objects beloging to the schema owner in UAT before importing it (touser=OWNER01, ignore=y) using the production dumpfile?
I'm asking this question as I'm afraid that if we did not drop all the pl/sql objects in UAT database, the updated procedures/fuctions/triggers exported from the production database will not get imported to the UAT database as UAT database have the same procedures/fuctions/triggers names (but not updated code) .
will profiles be exported and imported too duing full database level exp/imp?
please kindly advise.
thanks
Message was edited by:
chew

I am unable to connect to the internet via WiFi connection. My iphone works just fine. Please advise possible solutions.

I have an iPad on v5.01. I am unable to use my wifi network to connect to the internet. My wife's iPad works fine. Please advise any potential solutions.

Have you checked to see if your WiFi router needs to have your iPad's MAC address specifically permitted to use WiFi? Some WiFi routers have a section in the settings called "Access List", possibly under "Security".
You can find the MAC address in Settings > General > About > Wi-Fi Address

Anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Urgent please
anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Sounds like the folder Write permissions issue described here with a solution:
"Some import operations were not performed" from camera import

Database shutting down Problem please give solution

hii.......
we have 7 databases in our server when i am restarting my serverComputer some Databases are shutting down (randomly)
i have to manually starting(databases) again .
Please provide solution
Operating System - Windows Server 2003
Oracle 10g- version - 10.2.0.1.0
Thanks in Advance
regards
Dpj
Edited by: user8029025 on Dec 16, 2009 11:11 PM
Edited by: user8029025 on Dec 17, 2009 8:54 PM

i have to manually starting(databases) again .
Please provide solution
in services try to set to automatically start when u restart system.
sarah

How can I delete old movies that I already purchased, which are saved in my account? Actually I don't want them to be viewed by others who use same account, so is there any solution to delete them? Please advise. Thank you

How can I delete old movies that I already purchased, which are saved in my account? Actually I don’t want them to be viewed by others who use same account, so is there any solution to delete them? Please advise.

Delete Purchases = No.
But there is this...Hiding and unhiding purchases
iTunes Store > http://support.apple.com/kb/HT4919

I want to purchase from within the game and show me what is the solution of this letter: Please advise and thank you (Your purchase could not be completed. For assistance, contact itunes support at)

I want to purchase from within the game and show me what is the solution of this letter: Please advise and thank you (Your purchase could not be completed. For assistance, contact itunes support at)

You need to click here and ask the iTunes Store staff for assistance.
(100508)

Both in safari and Facebook app. Likewise, can't see any Facebook contact pictures on contacts app. my softwar is up to date. my Facebook app is updated. please advise any solution to this. When you view it from safari, no pictures are shown and it looks

both in safari and facebook app. Likewise, can't see any facebook contact pictures on contacts app. my sofware is up to date. my facebook app is updated. please advise any solution to this. When you view it from safari, no pictures are shown and it looks like html script texts. In facebook app, there are texts but no no images shown. thanks.
iPad, iOS 6.1.3

Where did you get the device? Is it possible that it has an IT policy on the device blocking Facebook and/or Facebook options? Look in Options >Security Options >General Settings (actual menu paths vary with OS version) and see if there is any reference to IT policy.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

When I am connected to the WiFi, my apps cannot be download. Once I had disable the wifi and connect directly to the service provider, the apps will start to download. Please advise what is the problem and solution for my iPhone 5.

When I am connected to the WiFi, my apps cannot be download. Once I had disable the wifi and connect directly to the service provider, the apps will start to download. Please advise what is the problem and solution for my iPhone 5.

I can't follow your meaning. What does connect directly to your ISP mean?
Did you mean turning off WiFi but turning on Cellular Data on your iPhone?

Please advise correct solution for Search help

Hi ,
i want to develop a webdynpro application( in ECC 6) which takes data from 4.6C . So i have to provide my own search helps to certain fields ( like material number) .
As i am very new to webdynpro i planed to make search helps in ECC and using search help exit and RFC ( fetching data from 4.6c) fill data to these search helps and assign this to webdynpro fields. Is it make a -ve effect on perfomance? is there any alternative way to do this ? please advise.
Regards,
Ratheesh BS

>
Ratheesh Bhaskaran wrote:
> Hi ,
> Can you please explain this 'There is a BAPI that doesn't remote search helps generically' .
> Regards,
> Ratheesh BS
Well that should have read - 'There is a BAPI that does remote search helps generically'. That makes more sense. The BAPI name is BAPI_HELPVALUES_GET.

How to delete the problem-solution in Solution Database

Dear Sir,
I need to delete the problem-solution in Solution Database which is already created in CRM ( IS01). However, I don't know how to delete.
Please advise.
Thank you and best regards,

Dear Sir,
I need to delete the problem-solution in Solution Database which is already created in CRM ( IS01). However, I don't know how to delete.
Please advise.
Thank you and best regards,

Search Functionality not working in The Solution database

Gurus,
I habv currently configured Solution Database on my server . It is is getting updated by the Action Profile .
Now when i am trying to serch for any soultion , I am not able to search , also the Radiobutton ( Add to cart ) is not active in my case
Any anwers for this
Uday Borse

Hi
like to know did you manage to resolve your request, If yes please advise since i have the same issue, Trans CRMM_SEARCH the search function is working fine. But i'm unable to do a search via IS01
any answers?
Thanks
your request below
"Gurus,
I habv currently configured Solution Database on my server . It is is getting updated by the Action Profile .
Now when i am trying to serch for any soultion , I am not able to search , also the Radiobutton ( Add to cart ) is not active in my case
Any anwers for this
Uday Borse"

Please ADVISE: Implementation of ARCs at Table Level

Dear Colleague,
While modeling with Designer (DS9i, Release2), I have made use of Arcs, i.e. when only ONE of two or more relationships are applicable at a time, but two or more of the relationships are possible.
I have the situation in which an ARC contains two relationships that are also part of the primary key.
My question is: How will designer implement this at the table level when I generate the table defintions from the entity definitions?
I assume:
1. that one column is generated for each relationship.
2. that a check constraint is generated e.g.
(col_1 is NULL and col_2 is NOT NULL) OR
(col_1 is NOT NULL and col_2 is NULL)
Since one of the two columns must be NULL, these columns cannot be part of the Primary key. Does Designer consequently, generate no Primary key constraint, but only a candidate key constraint?
Please advise.
Best regards,
Randy

Hi Randy,
I suggest you make changes in the table design after transformation. You can then arrange your own design solution to the problem (either single key or multi-key with check constraints). Remember the database design transformer is not intended to provide a directly usable design, just a 'first-cut'.

Please Advise : Solution database

Similar Messages

Maybe you are looking for