Please allow more than 13 digits in the financial report calculation

Dear SAP development team,
I would like to suggest the financial report programming code or query or what else that is used to generate the financial reports (TB;P&L;BS) could allow the calculation of debit or credit more than 9223372036854. It made me laugh that it is not allowed.
Why I said so ? Here are the reasons:
1. The report data is not stored on a specific table
2. If the report has calculated debit or credit greater than 9223372036854 while report processing is taking place, the report should still be appears but the amount of debit or credit that greater than 9223372036854, please put the zero on the debit or credit.
I expect that we could still use the report either money overflow happened.
John

Hi, Yang
My colleagues came across that problem recently. I advised them to split the transaction and create several transaction instead thereby avoinding using more than 13 digits.
Another way that came to my mind is to create a new currency with excnage rate (say) 1:1000 . And create the transaction using this currency.
Can't say that both solutions are perfect but I am afraid these are only ones.
Konstantin.

Similar Messages

  • How do I configure the Airport utility to allow more than one rule per port?

    How do I configure the Airport Utility (AU) to allow more than one rule per port?
    I am on a home network, with broadband cable modem.  I have my airport extreme connected to the broadband modem.  I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols.  The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists". 
    I need to be able to allow SSH on both of my servers, for instance.  Am I missing something?  Is this doable with AU?
    Thanks for any insight.
    Khalid

    The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
    What you won't be able to do is map a single or multiple ports to multiple IP addresses.

  • It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, w

    It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!

    Hi Vmanfromusa!
    It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • How do I use AE to allow more than one device with my cable modem?

    I connected by AE to my cable modem at my house in Japan and it works fine on "bridge mode," but only for one device at a time (this laptop, but not my iPod Touch, or vice versa). As soon as I connect a new device, it will kick the other one off. It seems that my cable modem here will only allow one device. Is there a way that I can use my Airport Extreme to allow more than one device and not have to pay the Internet provider extra for multiple IP addresses? How do I go about this? Do I select "share a public IP address" or do I select "distribute a range of IP addresses?" I tried these options but obviously wasn't doing it correctly, because then I lost the connection for everything... Thanks!

    It would be best if you "hard reset" the Airport Extreme to clear out the old and conflicting settings and then reconfigure it again.
    Hold in the reset button until you see the amber light begin to blink more quickly. Keep holding for another 3-4 seconds when you see this and then release the reset button. That will get the Extreme back to the original starting point.
    After you have powered the modem back up after the full reset, you will need to reconfigure the AirPort Extreme again. If you are using he guided setup in AirPort Utility, you will choose the option to "create a wireless network" during the setup.
    If you are using the Manual Setup, the Wireless Mode will be "Create a wireless network" and the setting for Connection Sharing would be "Share a public IP address". Adjusting the Connection Sharing setting would be the last thing that you do before you click Update to save settings.
    Here, I am assuming that you have a simple cable modem (it will have only one ethernet port), correct?

  • HT1277 I have OS X 10.9.2 and have downloaded maverick. If I am sending an email message to one person, options for addresses  from my address book show up. However if I want to send it to more than one person, the address options for the others do not sh

    I have OS X 10.9.2. and have downloaded Maverick. If I am sending an email message to one person, options for addresses from my Address Book appear. However if I want to send it to more than one person, the potential addresses for the other persons do not show. Can you please help?

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • How to write validation in java sript item should not allow more than 20 ch

    HI,
    I need to write validation in java script for a item it should not allow more than 20 characters.
    Thanks
    Nr

    If this answers your question, please mark your question as answered (so everyone knows it is answered) and assign points where you see fit..
    Thank you,
    Tony Miller
    Webster, TX

  • Should not allow more than one attendance or absence code on any given day

    Hi Hr Experts ,
    I need to use customer enhancement in my program.
    CATS should not allow more than one attendance or absence code on any given day. requirement is
    that each day will be either a full attendance or full absence and there will not be any mixture.
    Function/Program: u2022
         EXIT_SAPLCATS_006: CATS: Validate Entire Time Sheet
    transaction code CAT2.
    how to code the same?

    hai,
    check the Time constraint class for absence/attendance types.
    Regards,
    Chiran Reddy.

  • Can I download Photoshop cc more than twice on the same computer

    I had problems with my computer,can I download Photoshop CC more than twice on the same computer?

    Hi problm,
    Yes, you can , it will be counted as second activation if you have not deactivated the previous install & activation.
    I have checked & found that you have deactivated from one machine & it is active on one computer, this entitles you an install.
    Incase it does not help you, please contact adobe http://adobe.ly/yxj0t6
    Regards,
    Rajshree

  • I have Elements 10. It doesn't handle RAW. It also doesn't allow more than one Fine JPG to be downloaded at a time. Can this be fixed with a download, or am I stuck to upgrade to Elements 13?

    I have Elements 10. It doesn't handle RAW. It also doesn't allow more than one Fine JPG to be downloaded at a time. Can this be fixed with a download, or am I stuck to upgrade to Elements 13?

    philips69374220 a écrit:
    I have Elements 10. It doesn't handle RAW.
    Yes, it does.
    FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
    It can handle the raw files covered by the ACR 6.7 version.
    For newer cameras, you can use the free Adobe DNGconverter to batch convert a folder into the DNG raw format that PSE10 can read and edit.
    (see the link in the upper document)
    Fine JPG to be downloaded at a time.
    All versions of Elements can open many jpegs at the same time, and the organizer lets you import as many as you want?

  • Have Revel Premium but will not allow more than 2g of photos...not showing unlimited Gigs...How to Access unlimited Gigs?

    Have Revel Premium..but still not allowed more than 2gigs of photos...How to access unlimited Gigs of Revel Premium?

    Hi Dale
    If you are signed in using the same email ID that I see here, you should have unlimited photo uploads.  It shouldn't be required to uninstall and reinstall the app, but since I can't explain your trouble, it seems reasonable to try that.  First, be sure that your photos are safely backed up outside of Revel, eg., to an external USB drive.  If your photos are already uploaded to Revel, also be sure that you can access them at www.adoberevel.com
    The best way to delete the app and clear the app cache is to long-click on Adobe Revel in Mac's Launchpad view.  In Launchpad, long-clicking an app should show a tiny 'X' button, which will remove the app.
    If the problem persists, can you send me a screen shot of your account details in the app settings? 

  • Allowing more than 1 apple ID on iPad?

    How to allow more than 1 apple ID on iPad?

    For what purpose? It is easy in some cases, impossible in others.
    You can only have one iCloud account in Settings > iCloud,
    You can have a different one (only one) in Settings > iTunes & App Stores.
    You can have multiple iCloud accounts in Settings > Contacts, Calendars; some functions (Photo Stream, Documents & Data) can only be associated with the primary iCloud account.
    Keep in mind that the iPad is designed to be a single-user device.

  • CRS Install hostname being used by more than once for the same node.

    Hi, we're installing The Oracle Clusterware and on the Cluster Configuration screen of the universal Installer (the one were you specify the clustername and clusternodes) we get the following error message in a dialog box when the next button is clicked:
    "You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, node1, that you entered is being used by more than once for the same node."
    Has anyone experienced this error message before and know what the cause is?
    Could it be a problem with the /etc/hosts file?
    Thanks in advance,
    M

    Make sure you allocate separate IP addresses on your network for the VIP addresses on each RAC node (this is not the same as the machine IP already configured on the OS).
    Also, the installer may complain if your private and public IPs are configured under the same subnet.
    Finally, as mentioned before, check that name resolution for all the IPs to be used. On all RAC nodes, your /etc/hosts file should be configured with:
    - public name and IP addresses of ALL nodes
    - private name and IP addresses of ALL nodes
    - VIP name and IP addresses of ALL nodes
    Hope that helps
    B.

  • Join  configuration cannot be resolved. Reason :more than 1 of the detail .

    Hi Guys,
    I am getting a following error while opening a discoverer report.
    Join  configuration cannot be resolved. Reason :more than 1 of the detail folders uses non-aggregated items .I know this error is regarding the fan trap.
    The report is built from 5 folders(Complex & Simple) and a custom folder.I have 3 more reports which are using some of the simple folders from these 5 folders and are joined with other folders with the appropriate joins.
    Is this the reason I am getting the error ?
    Appreciate your help !!
    Veejay

    Hi Veejay,
    is it that the columns which I am using should be at same levelNo, not really. A item that has a data point property means that Discoverer knows that the item can be aggregated in a report. So if you include detail (i.e. non-aggregated) data points into a workbook from 2 detail folders then Discoverer will generate a fan-trap error because the workbook is not aggregated correctly.
    Let me try and give you an example. Suppose we have 3 folders; A, B and C. Folders B and C are detail folders of A. Now support A has one row; folder B has 2 detail rows to A and folder C has 3 detail rows to A. Now if you create workbook selecting items from A and aggregate (e.g. SUM) items from B and C you will get 1 row containing the SUM from B and the SUM from C. Similarily, if you select the detail data point from B and the SUM from C you will get 2 rows containing rows from B and the SUM from C. However, if you select detail data points from both B and C you will get 6 rows in the report and Discoverer will generate a fan trap error because the number of rows do not relate to any one table. But, if you change the join from A to B to be a 1 to 1 join then you will still get 6 rows in the report, but Discoverer will not raise a fan trap error because Discoverer thinks the number of rows returned is in from table C because you have said that there is only 1 row in B for every row in A.
    Rod West

  • Error: An attribute cannot appear more than once in the same start tag

    Hi Everyone,
    when i run the page sometimes it works fine but sometimes it throws Compilation Error as below.
    "Error(502,1224): file:/C:/Jdeveloper/jdevhome/jdev/myhtml/OA_HTML/fwk/t/Session_2055663493/region1.uix<Line 502, Column 1224>: XML-20124: (Fatal Error) An attribute cannot appear more than once in the same start tag."
    And i delete the particular file from the path and run the page so this time it works fine.
    But later after sometime i get the same error but the session number will be changed, then again i need to delete it and run.
    What can be the permanent solution for this issue?
    Plz let me know any suggetions.
    Thanks.

    Seems like the mdl file is corrupted or was not generated correctly.
    Can you try to create the mdl file again and then try the import ?
    If it doesn't work then try contacting Oracle Support.

  • Does Hotmail have an attachment size limit? When i attach something with more than 3mb in the mail it isn't send. It gives a resize option.

    Does Hotmail have an attachment size limit? When i attach something with more than 3mb in the mail it isn't send. It gives a resize option.

    Hi. Txs. The problem is that in my pc the limit size is 25mb. But in my ipad the mail only sends files under 3mb.

Maybe you are looking for

  • Need help in archiveing and deleting records

    Hi frnds I wrote a procedure to archive the records and delete the archived one but after inserting and deleting the tot counter is not working and its showing 1 record inserted and i didnt tried the deletion part,pls find my code and how to get the

  • As a future game developer, how can I submit a standalone Mac game to the store?

    I'm just saving up for special software, and when I buy it, I'm going to get together with some friends to pump out a standalone game for Macs. And before we start development, I'm just wondering if and how I can get it onto the Mac App Store when it

  • Can i zoom in when recording video on ipad

    How do i zoom in when recording video on an ipad. I am aware of the 3 finger tap to zoom in when watching video but it is the recording of video that i am interested in. If not is there an app to facilitate this? Many thanks

  • Trying to update CS6 to CC. Error message U43M1D206.

    Trying to update CS6 to CC. Error message U43M1D206. Any ideas? Thanks, Matt

  • Lost Password After 10.4.5 Upgrade? Do This:

    If the password you've been using for the past, oh, five years or so suddenly doesn't work after upgrading to 10.4.5, as it happened to me and a lot of other people, do this: Boot up with the Tiger installation disk. Under Utilities, click on Reset P