Please allow the guides to extend into the rulers like previous versions.

When you place guides onto a document they end at the end of the document. They do not extend into the rulers when placing. It is very difficult/impossible to see where your guide will be placed. For example if you want to place a guide at 5.5, you are guessing because it doesn't extend onto the ruler like it used to.
Additionally, instead of smoothly moving and dropping where you want it to the guides snap to different points, so on top of the problem above, it is impossible to get guides where you want them based on measurements.

Acrobat X
Thank you,
Tammy
Cooper Printing, Inc.
2094 New Danville Pike
Lancaster, PA 17603
717.871.8856
717.871.8878
[email protected]

Similar Messages

Apple please allow the user to edit the genres

You know after apple revamped iTunes 12, and I think that they did a great job,, I started to think about the genres. I really wish that I had control over what genres appeared in my list because the overwhelming majority go unused and I'd like to have only the ones that are pertinent to me in my list. So apple if you are reading this please allow the end user to choose which genres appear in their list and allow them to delete the rest.

See this article.
tt2

Error "Please use the Latest SAP GUI version" in service admin

Hello everyone,
I have successfully installed ITS 6.20 & We are using ECC 6.0, But when I try to logon to the Admin service. I gives an error message saying <b>"Please use the Latest SAP GUI version"</b>.Please help me solve this problem.
Regards
Subramanya

Hi,
several instances of ITS 6.20 have to be mapped either to
a) different TCP/IP ports or
b) if the same TCP/IP port should be used they have to have an individual hostname.
These settings have to be defined correctly in ItsRegistryWGATE.xml.
Please have a look at this thread for further information:
Re: How to register agates with the ADMIN instance
You could also search within this forum for the keyword "ItsRegistryWGATE.xml" or do a SAP Notes search to get more information.
Also please read the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/211cc811f21a74e10000000a1553f6/frameset.htm">ITS Administrator's Guide</a>
Best regards
Henning

I-tunes is note letting me access i-tunes store without first dowloading the new version of i-tunes. The problem is that my older operating system won't work and is not allowing the newer i-tune versions to work. How can I just get use the old i-tunes?

I-tunes is note letting me access i-tunes store without first dowloading the new version of i-tunes. The problem is that my older operating system won't work and is not allowing the newer i-tune versions to work. How can I just get use the old i-tunes?

Hi,
Not sure if any of you above have managed to solve your problem or not but after coming across this same problem myself today as I am currently 'sofa bound' I decided to make it my mission to find a way around it.
Initially I did think, having ready what seemed like a million questions and people with the same problem, that the only way was to buy OS X 10.5 ... HOWEVER, no. In among all these threads I found a jewel - Download I Tunes 9.2.1 which gets rid of the download itunes 10 advert and allows you to then buy from itunes again :-) I am now one very happy lady.
I apologise to all those that dont have older versions of OS X that maybe wont support even this upgrade but certainly for those like me with just 4yr old lap tops at least it means it not longer means buying a new one.
Hope this helps son very frustrated people like myself - so much for apple support!

Labview 7.1 crashes windows XP when using VI's saved with the 'Save for Previous Version' option available in Labview 8

I am trying to work with a series of vi's developed in Labview 8 in Labview 7.1. The code was saved with the 'Save for Previous Version' option available in Labview 8. When trying to use the code in LV7.1 my entire Windows XP system locks up (cursor freezes). Are there any ideas what's going on and how to fix this?
Thanks for your help!
Mike

I have seen some problems with the save for previous option in the past. Instead of saving the entire hierarchy, try seperating the code into several different pieces and saving each piece individually. Then, see if you can open the different pieces in 7.1.
If that doesn't help, you should post some more details, like when exactly does it lock up, does it have things like DLL calls, and maybe attach the code.
Try to take over the world!

ITunes is a blank-slate...How do I load the most recent previous version of my library?

I "re-arranged" my files on my computer to free up space and now my iTunes is completely blank. No apps, no music, no ringtones. Nothing. How do I find and load the most recent previous version of iTunes? Since we went to the cloud I haven't actually plugged my phone in to sync it...I'm afraid it will ask me if I want to load what's on my phone into iTunes, and I just want my old iTunes back. Any ideas? TIA!

When you re-arranged your Files for iTunes, in your C:\Users\Your Username\Music\iTunes folder ->should be a iTunes library.xml, and a Itunes library.lib- if you moved those thats why your library is blank.
Simply go to File- Add folder to library-> locate your Music folder- click choose - and you library should come back

Previous versions displays only the 64 OLDEST previous versions for vista, win7, 2008, 2008R2, 2012

I set HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\VSS\Settings\MaxShadowCopies to 128 which allows the server to create 128 shadowcopies - which it does.
HOWEVER. the 'previous versions' tab on some clients only displays the oldest 64 previous versions and not the newest 64. I can verify this by changing MaxShadowCopies to 80, and I see the oldest 64 previous version but not the newest 16.
Server is win08R2
Client 2003r2 or XP: ALL 128 pervious versions are displayed
Client vista/win7/2008/2008R2: ONLY the 64 oldest are displayed

I set HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\VSS\Settings\MaxShadowCopies to 128 which allows the server to create 128 shadowcopies - which it does.
HOWEVER. the 'previous versions' tab on some clients only displays the oldest 64 previous versions and not the newest 64. I can verify this by changing MaxShadowCopies to 80, and I see the oldest 64 previous version but not the newest 16.
Server is win08R2
Client 2003r2 or XP: ALL 128 pervious versions are displayed
Client vista/win7/2008/2008R2: ONLY the 64 oldest are displayed
http://technet.microsoft.com/en-us/library/ee923636(WS.10).aspx
Only the last 64 are manageable... you have to update the registry.
Try deploying that variable through GPO as a registry update, see if it changes on the client facing side.
Computer Configuration\Preferences\Windows Settings\Registry - Right Click the blank section and select "New Registry Item"
Action Update
Hive Hkey_local_machine
Key Path SYSTEM\CurrentControlSet\services\VSS\Settings
Value MaxShadowCopies
Value Type DWORD
Value Data 128
Value Data Min. 1 Max 512
Steve Kline
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Product Specialist
Microsoft Certified Network Product Specialist
This posting is "as is" without warranties and confers no rights.

Does iDVD have all the themes from previous versions?

If I were to get a new iMac with iLife '08 installed will I have all the themes from previous versions of iDVD? Can someone with a new iMac and an older machine with iLife '06 & 05 confirm?
If the are not all there can I move them over and hopefully iLife '08 iDVD will convert them?

My upgrade yesterday maintained all previous themes.
I recall reading this week that you could get old themes from Apple if needed. Don't know if that's a download or snail mail request.
I don't see anything about that here:
http://www.apple.com/support/idvd/

How can I change the appearance to previous versions?

I upgraded Firefox but I don't like the new layout. The buttons and address bar and menus are all in positions I don't like. Is there a way I can make Firefox look like the previous version? I don't want to downgrade, I just want it to look like the previous version.

Hello Joel_IEI,
You can modify each report entry as it is being generated by doing the following steps:
1) In the TestStand Sequence Editor's Report Options, change the Report Generator to "Sequence".
2) In your sequence file, override the ModifyReportEntry callback. In this callback, you can modify or even replace ENTIRELY the default report information TestStand plans to append to the report. You can use Statement steps to modify the contents of Parameters.ReportEntry (the TestStand variable that you will use to do this), or replace the contents entirely!
You can look at the code example Adding Extra Results to a Report Using the Modi
fyReportEntry Callback Sequence for more information.
David Mc.
National Instruments

Does each new ios firmware upgrade contain the features from previous versions?

Does each new ios firmware upgrade contain the features from previous upgrades?

Not necessarily.
Just like OS X, somethings may be removed.

How in the world can I select my external hard drive as a scratch disc for video? Please skip the obvious, like 'is it plugged in?'

At wit's end trying to select my external hard drive to load video on. Time Machine backed stuff up on it so the computer knows it's there but it won't show anywhere else, iMovie or FCE4.

Hi Eric and thanx for the fast response. I've had very little time to piddle around with this iMac and fce4 since I got it a few years back but I DO remember seeing an option back then--when capturing video from the camera--to choose some other scratch disc. Some time after buying and plugging in the ext. drive I clicked on Time Machine (not even knowing what it was--some window popped up and it looked good). I wonder if turning on Time Mach has locked me out of the ext. drive. It doesn't show up ANYWHERE ANYTIME now, not under system pref., user pref. in fce4 or iMovie or anything else EXCEPT when I click on Time Machine it does tell me I've 2.97 terrabytes of space (which has to be the ext. drive; the iMac has 500 gb). I'm thinking of uninstalling and reinstalling fce4 and starting over.

Where do I find the download of previous version of DreamWeaver (CC 2014 - NOT CC 2014.1).

The new one has an annoying bug with the preferences that hangs DW when saving files...
The Windows one! Nancy O. sent me the Mac link, but I need the Windows version...
Thanks
Pedro

Pedro you can download the base installer at Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools. Please make sure to complete the Very Important Instructions prior to clicking on the download link.

How can I restore the GUI of previous versions?

I want to restore the configuration of the GUI to that which I have become accustomed over many years and several browsers.
It is as if FF developers somehow concluded the gas, brake, shifter and turn signal stalk have been in the wrong places for 20 years.
I gotta be honest, I'd rather switch browsers than to click through page after page to get to link after link to not solve such a simple problem.

Thanks. Looks like I'm stuck switching browsers. Pity Mozilla seems to have embraced change solely for the sake of change.
I'd think developers would be familiar with the popularity of Google's inexplicable changes to their GUI/s in the name of "evolution".
Hey, thanks again. You didn't exactly solve my problem but I did learn how to make my problem go away.

HT3390 OS X 10.9.2 how to use the Multi-Touch trackpad to adjust icon sizes in the Finder like previous OS?

After I upgrade my OS X 10.6 to 10.9.2, I lost.
Everyday I search the forum to look for the "feeling" of using Mac OS (migrate from windows to OS X10.6). The OS X 10.6 is just great.
Now the questions, how to use the multi-touch trackpad to adjust icon size with simple pinch open or close gesture?
Thank you.

I might also add, you can run 10.6.8 Server in virtualization, if you need access to Rosetta applications:
https://discussions.apple.com/docs/DOC-2295#ROSETTALION

[REQUEST] Previous version of the client (APK)

,====================================================================
|
| Welcome to Spotify for Android Archive by: neo-x
|
'====================================================================
I have been collecting Spotify versions to the archive since
many times when a new version has been released, it might have
been buggy or such.
* 0.4.0.4 - Oldest version I have found
* 0.4.12.153 - version that has
* Landscape (when Docked)
* SD card option
* Bugs, that the Play button messes up the GUI
* 0.4.12.180 - version that has
* Landscape (when Docked)
* SD card option
* Works more stable than the 153 version
* Doesn't have the Play button bug
* 0.5.0.972 - version that is
* This is the Preview version (one of them)
* 0.5.0.1247 - version that is
* Have no clue
* 0.5.2.87 - version that is
* Previous version
* 0.5.3.56 - version that is
* Previous version
* 0.5.4.73 - version that is
* Current version
Versions of Spotify:
!!UPDATED!!
Here are the links to previous versions of Android Spotify Clients.
If you have more, I'm interested adding them to the archive.
From the older versions 0.4.12.180 seems to be the most stable version
with the support for SD card storage + Landscape mode when in Car Dock
0.4.0.4 - https://www.dropbox.com/s/r6v2zqpqr4havez/SpotifyAndroid.apk
0.4.12.153 - https://www.dropbox.com/s/of9axw8tsw6tr0u/SpotifyAndroid.apk
0.4.12.180 - https://www.dropbox.com/s/uv6id0gqad8ypr7/SpotifyAndroid.apk
0.5.0.972 - https://www.dropbox.com/s/5t9ko769z1lj8if/PreviewSpotifyAndroid.apk
0.5.0.1247 - https://www.dropbox.com/s/h03z889wdijdxrn/SpotifyAndroid.apk
0.5.2.87 - https://www.dropbox.com/s/gmxv85y2ew7p31q/SpotifyAndroid.apk
0.5.3.56 - https://www.dropbox.com/s/7gua4bcvdwviexq/SpotifyAndroid.apk
0.5.4.73 - https://www.dropbox.com/s/ybrr3iil3mpel1k/SpotifyAndroid.apk

This version https://rapidshare.com/files/2999426550/SpotifyAndroid.apk
Some Android phones have both internal storage and an SD card slot. In order for Spotify to use the SD card for storage of offline playlists, you will need to manually specify which folder you want it to use. Please keep in mind that your offline playlists will need to be re-synced after doing this:
Download this apk file.
Enable third part apps in Settings.
Install this apk file.
While at the login screen, press the hardware Menu key and select SD Location.
Enter the path to a folder on the SD card.
Finding the exact path to your SD card can be done with a file manager and can differ between phones.
On the Samsung Galaxy S, for example, you should use:
/mnt/sdcard/external_sd
Spotify will then store tracks in this folder:
/mnt/sdcard/external_sd/Android/Data/com.spotify.mobile.android.ui
Go to Market and update Spotify to new without removing old version. Now you can delete Spotify's Storage in Cache from your phone's built-in memory card. You can find it with file manager, just search it from built-in memory card in Android - Data - Spotify - Cache - Storage folder. The new Storage folder is now in external Micro SD card, so you can delete this old Storage folder if still in built-in memory card.
All done!

Please allow the guides to extend into the rulers like previous versions.

Similar Messages

Maybe you are looking for