Please ans. the question.
Dear all,
When I am going to create Company Code ,The in my system a massage displaying that "Client 000 has status not modifiable",why?
Can any one explain the solution please.
Thanx 7 regards,
S>N.Biswas.
Your client status is non-modifable , means you cannot do any IMG settings in this client . you will have to make the configurations in golden client and transport the same to this client through transport request .
Ask your basis counter part to make necessary settings . he would be in a better position to educate you on this subject .
Cheers ,
Dewang
Similar Messages
-
21.5 inch iMac yellow screen issue - please read the question before answering
I have a late 2012 iMac (21.5inch). I thought 21.5 models were immune to this issue, but I noticed bottom half of the screen is showing some yellow tint compared to upper half. I thought it was due to the angle of the screen and lighting in my room but that changed when I put my MacBook pro right next to my iMac. Compared to my mid 2009 MacBook Pro, the iMac's screen has a definite yellower time to it..
How much will it cost to replace the screen to eliminate the yellow tint? Please, no replies about taking my iMac to Apple store or calling them. I've already called several different Apple stores, and they have no idea. And please, no Applecare answers or "expensive" answers. I already have Applecare. Yes, I know it's free if I have Applecare. I just want to know how much Apple will charge if I don't have Applecare.If you don't have AppleCare, it will be probably pretty pricey (just to get them to open it up!).
If any past experience with iMacs doing similar things, it is probably one of the backlights they use for the screen.
That AppleCare does pay for itself when things like this happen.
Except for RAM, there are no user-serviceable parts in iMacs. -
Please solve the question on select options
i have added 5 select options Each of these new selection options (when selected) will then display on the report .
If A the 1st select option is selected then the new column in the report will display to the right of the existing select-option column.
Message was edited by:
nchandra sekharHi,
U mean what are the seelct-options that are selected should be display on the report output??if that is the case then refer the beloe code.
Internal table for Selection screen parameters
i_seltable TYPE STANDARD TABLE OF rsparams.
*& Form get_selection_screen
Subroutine to get the user selection on selection screen
FORM get_selection_screen .
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = sy-repid
TABLES
selection_table = i_seltable
EXCEPTIONS
not_found = 01
no_report = 02.
IF sy-subrc NE 0.
REFRESH i_seltable.
ENDIF.
ENDFORM. " get_selection_screen
*& Form display_selection_criteria
Subroutine to display the selction criteria in the output
FORM display_selection_criteria .
CALL FUNCTION 'RS_LIST_SELECTION_TABLE'
EXPORTING
report = sy-repid
seltext = c_x
newpage = space
TABLES
sel_tab = i_seltable
EXCEPTIONS
sel_tab_empty = 1
OTHERS = 2.
IF sy-subrc <> 0.
REFRESH i_seltable.
ENDIF.
ENDFORM. " display_selection_criteria
Reward if helpful.
Regards,
Nagaraj -
SD Questions Please Send The Answers
Hai
Here i have attached some SD Interview Questions .Please Send the Answers .
Awaiting For Ur Replay - Please Mail Me [email protected], And [email protected]
Thanks
S.Siva
1. Five steps of implementation with full details.
2. What is ticket? Process flow ticket?
3. What is ticketing tool? What is SODA?
4. How to stop PGI?
5. Details about SLS.
6. Details about the Gap analysis. (What are the gaps you have faced?)
7. What is meant by landscape? (Landscape of your project for example)
8. In which scenario we go for different pricing procedure at orders and billing?
9. Cut over activity means what?
10. In real-time project, how many pricing procedures to be used?
11. What are the tools used to communicate with the client?
12. Any three major issues faced in the support project?
13. Difference between SD account key and FI account key?
14. How to post goods receipt from storage location to warehouse? What is the movement type?
15. Tcode for listing blocked documents?
16. What is the advantage of using the text as reference instead of duplicating it?
17. Have you ever applied BPR (Business Process Reengineering) in an implementation project?
18. To perform material configuration, which system one has to use in landscape?
19. What is the tcode for creating number range for a sales order type?
20. Difference between centralized credit mgmt and decentralized credit management.
21. Where do u configure in development server or application server or in testing server?
22. Details about clients.
23. What is an abap query? Why it is used?
24. What are the steps for end user training in sap SD module?
25. Difference between discount and rebate.
26. When is material determination got triggered?
27. A customer wants to buy two materials / one is 3rd party material (Item category: TAS) / another one is normal material (Item category: TAN). His requirement is he wants a single invoice for both items without splitting? How can we do this?
28. In consignment fill up, we deliver goods to customer site, is there any agreement with customer? If yes means, what type of agreement relating price?
29. Details about VAT configuration.
30. What is the use of pricing date in condition type?
31. In R/3, we represent a companys structure by defining and assigning corporate structure elements. What is the purpose of doing that?
32. What are the different partner functions can a customer master record serve?
33. What is the difference between condition type EK01 and EK02?
34. What is retroactive billing? Who will create that?
35. In your functional role, how you gather technical specifications for your technical team members from your client?
36. Is it possible to change existing item categories?
37. For cash sale, how will availability check be done?
38. How is the access sequence controlled?
39. User specific parameter means what? How to create that one?
40. What is the difference between listing and exclusion?
41. Difference between customization and configuration.
42. How to customize rebate processing in sap sd?
43. LSMW important step is what?
44. What is the extract used in condition technique of pricing?
45. Can we create credit management separately for two different materials?
46. Work center means what?
47. If the client logon screen deleted while requirement is urgent, then what to do?
48. What is meant by time bond deliveries?
49. After implementing sap in production environment, while creating sales order, client wants to give discount for first 10 sales orders? How to do this?
50. What are the Three different kinds of messages? What is the difference between them?
51. Details about testing at sap sd.
52. What is the access sequence for header conditions?
53. Details about actual GI date and planned GI date .Can actual GI dt differ from planned GI dt?
54. Influencing factors for account determination for invoices.
55. Details about sap best practices.
56. To start a transaction, how many ways are there? And what are they?
57. Who will create transportation request?
58. In realization phase, what will be doing?
59. Is it possible to release change request without releasing task?
60. Details about lean warehouse management.
61. How to customize excise duty, insurance and cess condition type in pricing procedure?
62. How to stop PGI?
63. Data dictionary or repository means what?
64. How do you transfer request from development instance to production or quality instance?
65. What is the importance of release status in condition table?
66. Why does account group controls customer?
67. What are the deliverables in your blue print?
68. If you generate bill more than credit limit, then what will happen?
69. What is the value class used for material creation?
70. Why do we maintain sales office?
71. Is it possible to substitute one product for another? If so, how it can be achieved?
72. What is the difference between ATP check and availability check? How these reflect in sales order?( Which check system considers) what are the img steps for the same?
73. Explain process and steps involved in returns third party order processing.
74. What is the client specific data? Give 2 examples of client specific data.
75. What is the most critical field in delivery document?
76. What is the relation between sap sd and ABAP?
77. What is the functionality of negative posting in billing document?
78. In real time, when we start system in first, what screen we get and tell me the process how to log on screen? (IBM question)
79. How can you check in sap system, how, when and by whom, which fields in the customer master record were changed?
80. What is variant and its configuration?
81. After logging into R/3 system, if you want an end user to see a specific menu . How could you do that?
82. Is it possible to automate output processing?
83. Which data is relevant for crediting credit and debit memos?
84. In system landscape, where the sandbox and golden box client exists?
85. What is the user exists? /how can we create user exists? What is the purpose of that?
86. Details about value sap.
87. Is there any difference between product selection and material determination?
88. How do you transfer request from development instance to production or development instance?
89.What part of the company is responsible for the type of shipping, the necessary shipping materials and the means of transport?What is ticket? Process flow ticket
Handling tickets is called Issue Tracking system. The errors or bugs forwarded by the end user to the support team are prioritized under three seviority High, Medium and Low. Each and every seviority as got its time limits before that we have to fix the error.
The main job of the supporting consultant is to provide assistance on line to the customer or the organisation where SAP is already implemented for which the person should be very strong in the subject and the process which are implemented in SAP at the client side to understand,to analyse,to actuate and to give the right solution in right time.This is the job of the support consultant.
The issues or the tickets(problems) which are arised is taken care of on priority basis by the support team consultants.
The work process in support projects are given below for your reference.
1. The customer or the end user logs a call through any tool or by mail (RADIX).
2. Each one of the support team is a part of support group.
3. Whenever a customer logs a call he /she has to mention to which work group (by name).
4. Once the calls came to the work group the support consultant or the team need to send an IR (Initial Response) to the user depending upon the priority of the calls. (Top,High,Med,Low,None)
5. Then the error is fixed, debugged by the support consultant or the team. Then after testing properly by generating TR(Transport Request through the basis admin)
6. Then it is informed to the end user/customer/super user about the changes which have moved to the production server by CTS process.
These are the process. In summary, what I understand is that if any configuration or customization is required to solve the issue, then the consultant have to work on DEV Client, then the end user will test it in the QA client and after approval the BASIS consultant has to transport it to the PRODUCTION client.
An example:
Tickets in SD can be considered as the problems which the end user or the employee in the company face while working on R/3. Tickets usually occur during the implementation or after theimplementation of the project. There can be numerous problem which can occur in the production support and a person who is working in the support has to resolve those tickets in the limited duration, every ticket has the particular deadline alert so your responsibility is to finish it before that deadline.
To begin with , we should give "TICKET" to you for not knowing it.
Here is an eg of a ticket raise:
End user is not able to
1. Create Sales order for a customer from a New plant , since shipping point determination is not happened . ( Without Shipping point the document becomes INCOMPLETE and he will not be able to proceed further like DELIVERY, BILLING).
He raises a ticket and the priority is set in one of the below:
1. Low 2. Medium 3. High.
Now you need to solve this ticket. You would analyze the problem and identify that the SP configuration has to be done for the new plant.
You would request a transport for DEV CLIENT to BASIS. You do the change and Request one more Transport to BASIS for QA client. The End user will test the same by creating a sales order for the new plant and approve it.
Finally, you request a transport to move the changes to PRODUCTION. Once the change is deployed in production the TICKET is closed. What I have given is a small example. You would get some real issues with severity HIGH in your day-day support.
Regards. -
Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.
-
I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.
Your previous tabs will not re-open or be available to re-open when starting Firefox if:
*your previous session was in Private Browsing mode; see --> http://support.mozilla.org/en-US/kb/Private+Browsing
*you use Clear Recent History (''Firefox button > History > Clear Recent History'' or ''Tools > Clear Recent History''); see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-clear-my-history
*you clear History automatically when closing Firefox; see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-make-firefox-clear-my-history-automatically
NOTE: Your third-party Plugins (Add-ons > Plugins) are not in the "Application Basics" (Troubleshooting Information) in the "More system details" of your original post. Third-party Plugins are categorized separately in "Installed Plugins" under "More system details". You should review but not change the Plugins as detected automatically by the software on this forum when posting a question.
If you problem still exists after checking the above, the problem could be caused by one or more of your Extensions or Plugins:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anythingYou need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546) -
I recieved an ipod 5 for a early christmas present a day ago, I already owned an ipod 4 so i just used my info from that ipod as a back up for my 5g. but now when i try to download music from itunes it says i must use my security questions (which i made over a year ago) I can't remember the answers and i can't get on the email that it sends the reset info to. i don't know what to do and its really frustrating. please help ASAP!
You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
Whichever method you use, you probably won't get a response until the 26th. If you absolutely must make a purchase before then, create a new Apple ID; you won't be able to transfer previous purchases or iTunes Store credit to it.
(95471) -
Flash question...not sure which section to post in...please help the n00b...
Background: I am a designer (Illustrator/Photoshop) being thrust into the position of creating e-learning materials. I have managed to teach myself the infinitely irritating P.O.S. (piece of software) called Captivate, but am still pretty much useless in Flash.
I have a project that a former designer created a year or two back. It appears to have been done wholly in Flash, though Captivate may have been involved (not sure why it would have, but I don't know enough about what I'm looking at to be sure). She is no longer with the company, so I can't ask her directly, but I am hoping someone can help me here. The project is essentially Jeopardy, as in the game show. The design is such that it is a static screen (identical to the Jeopardy screen), wherein a user mouse-clicks a value in a category (e.g. Forms for 200), and a window (not an actual browser window, but a flash element) opens over top of the main screen, displaying the question and giving a list of selectable answers (typically multiple choice). Correct and incorrect answers are added or subtracted from the score at bottom. It seems relatively straight-forward (and I'd be happy to post all materials here if that would help anyone answer my question). What I need to do is change these categories/questions to update this material to make it concurrent with a new training course. I am hoping I can do this with the materials I have at hand from the previous designer- ideally, update the text file (I think I can follow the formatting to understand how to update questions/answers/correct answers/etc) and then "plug it in" to this framework...but I don't know. I'm at a loss.
The outputted Flash file (of no functional use to me, I believe) (.swf)
The Flash file that contains the framework (this has all "0000" for scores, "Heading" for headings...aka nothing is populated in this framework) (.fla)
The outputted html file
A .txt file containing all questions, headings, and values that would populate the framework (example below)
"&heading1=Banner Forms&
&heading2=Tricks of the Trade&
&heading3=Banner Speak&
&heading4=Surprise!&
&points1=1000&
&points2=2000&
&points3=3000&
&points4=4000&
&points5=5000&
&question1_1=What form do you use to view a Registrar hold?&
&answer1_1A=TSIAUTH&
&answer1_1B=SOAHOLD&
&answer1_1C=SGASTDN&
&answer1_1D=SHADEGR&
&correctAnswer1_1=B&"
It seems that this text file would be imported into the open framework in Flash, but I do not know the first thing about doing any of this. I will eventually be taking some Flash courses, but this project has a much tighter deadline than that.
Can anyone give me any insight into how to proceed? Please let me know if I should upload these files to link here, if it will help anyone to figure out how this works.
I apologize for what I imagine is a horribly simple question, but I am truly blind with regards to this material.
Admins, I apologize if this is not posted in the correct area.
Thanks ahead of time for any possible help.NEAT!
Hey guy, I got your answer for you. Or should I say hey "IDIOTA".
You see, that text file is read by the HTML when you access it. As in, there is no "importing" to be done. Simply update the text file as necessary to reflect the categories/questions/answers/correct answers, save changes, and that is that! Provided that you keep the text file in the same directory as the .fla and the html (which you obviously MUST do, or else the Jeopardy screen will show all blanks), you will be good to go! All eagles! All aces! Whatever the phrase is.
Anyway, hope this helps, chump. Any other dumb questions? -
i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO so i todd what others did then i did it but it kept showing the apple sign and now turn to blue again the turn yellow now white. Apple please fix it i havent been able to be gone at all past few days because of this also tries to connect with my labtop didnt work whats up with it. for people who didnt update it wait until they fix it beleive me
it still blinking with the apple sign
-
Security question keep saying they are wrong and I know they are right. I can't change them cuz when I try it tells me to answer the questions. I have tried everything changing my account and all and still can't get it can some one please help me out.
Go here and select "Reset your password." You will receive an email message with a link that bypasses the questions. You will then be able to select and answer the questions again.
-
I have a problem in the answers to the questions on my account I can not buy anything, please solve the problem
You are not addressing Apple here. And your post is a bit confusing. See Klaus's answer in this thread:
https://discussions.apple.com/thread/5228474?tstart=0 -
HT5622 Please help I've lost the question and answer confidential My Account
Please help I've lost the question and answer confidential My Account
Hi Saad al saad,
If you are having an issue with the Security Questions for your Apple ID, you may find the following articles helpful:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden -
Please help I've lost the question and answer confidential My Account
Please help I've lost the question and answer confidential My Account
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page should let you reset them : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use -
I want to know the questions and protection for my account because my account is locked I can not buy please help
The page that you posted from tells you how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should let you reset them.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use
Maybe you are looking for
-
I'm in India and use Indian iTune store. But there are certain books which are not avaiable in Indian store but are there in US store. How can i get those books?
-
UCCE 7.5 how to get BHCA and Average Call Handle time?
Hi everybody, I'm trying to do an audit of the existing UCCE system. Can someone please tell me how to get the BHCA and Average Call Handle time for agent? I did a SQL query against the CallTypeHalfHour table for all the entering Call Type but I'm no
-
Error relating a company code to a valuation plan
Hello, I am trying to relate my company code to a valuation plan in OAOB transaction but it appears the error AC551. I have checked it and I don´t know where could I enter the value for VAT indicator for nontaxable transactions. Could you help me wit
-
I need to configure an alert that will fire when a metric stops reporting. So, the metric is not at a zero value... it sometimes stops. I can'f figure out how to configure that. Thanks!
-
Safari webcontent quit unexpectedly
Every time I try to upload pictures to my wordpress blog I get that message. Everything else works fine. I can edit and read the blog, just not use the uploader. It works fine with Firefox and Chrome, however the new blog posted through firefox can't