Please assist me in conf of solution manager

Hi Expert,
i am doing configuaration of solution maanger as a functional consultant.
so is ther anyone who have worked on solution manager conf from functional side, please provide me your contact detail as i want some clearification about this.
Thanks and Regards,
Monty Garg

hi
i m not exactly get your requiremnet, but still
1. if you want to assign the transaction to the process steps please proceed this
[http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/35/62d96b453b11d5b38a0050dade3beb/content.htm|http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/35/62d96b453b11d5b38a0050dade3beb/content.htm]
2. if you are trying to get the URL of the document for linking this into tcode. please select the one of documnet placed in solar01,select attribute and click the button "Create Document URL" which the button stats as "Generate", copy this url and use where ever you can to link the documnet.
Thanks,
Jansi

Similar Messages

Urgent need for the creation of solution manager key please

Hello
Can i please ask you to create a solution manager key for me ?
i am stuck in my test installation of ECC6.
Here are my details :
       Instance name : sapdb1
       Instance number : 01
       Computer name : ap-hp1
Kind regards
Christophe

Hi Chris,
I understand the urgency. There are only two ways you can get a solution manager key. One by yourself. Otherwise, please create a message with SAP requesting a solution manager key temproarily. Unfortunately, even though we can create a solution manager key, it is not advisable to distribute the key in forums.
Hope this helps.
Thank you.

Add sap R/3 enterprise system in solution manager SLD

Dear All
Required solution manager configuration documents.
We have DEV QAS and PRD server on SAP mySAP ERP 4.7 ( SAP R/3 Enterprise )
And during the installation of solution manager I select u201CConfigure a Local SLD u201C
Which steps I follows to connect or configure my sap system with solution manager ( SLD ) then I will configure central monitoring, TMS management, Helpdesk etc
Who to Configure SLD Bridge ( in SLD Server ) ?
in which system Run Transaction RZ70 ( In SAP R/3 Enterprise ) ?
and how to Verify that my system is connected and working fine With SLD
Please help me regarding u201C configuration solution manager u201C
Regards
Shahid

Hi
Visit for step by step details of Standard Configuration of Basic Settings
http://service.sap.com/rkt-solman-->SAP Solution Manager 7.0->Technology Consultants & System Administrators->Technical Configuration->just drill out there you can find lot of simulator how to install and configure solution manager
http://www.wilsonmar.com/sap_solution_manager.htm
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
Regards
Uday

It's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

it's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

Assuming you are not manually managing your music, verify the following:
You are using the latest version of iTunes
On the summary tab of your iTunes sync settings you have checked "Sync only checked songs and videos"
In your music library you have checked all the songs you want to sync to your phone
There are no exclamation points next to any of the songs you want to sync to your phone
You have authorized your computer for all Apple IDs for purchased music you want to sync to your phone (in Store>Authorize this computer)
You have checked "Sync Music" on the Music tab of your iTunes sync settings
When everything looks correct, sync your phone.

System Monitoring for Satellite System in Solution Manager

Hi,
I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
Thanku

Hi,
In Solution manager I did below steps. :
1) Activated background dispatching in Rz21 (Client : 000).
2) Created CSMREG user (In RZ21)
3) Generated the configuration file for agent (CSMCONF).
I down loaded the ccmagent_35-20001346.sar file.
What are the steps i have to do in satellite system.
Thanku

Solution manager For SAP PI monitoring

Hello All,
Can you please explain me how to use Solution manager in SAP Netweaver PI monitoring ?
Please point me to any diagrams that can make me understand better.
Thanks & Regards,
Sita

Hi
Please check the below guides
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70cd1603-6761-2b10-f0bf-8dd799ef7263?quicklink=index&overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70cd1603-6761-2b10-f0bf-8dd799ef7263?quicklink=index&overridelayout=true]
[Monitoring SAP PI 7.1|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d05c14c3-34af-2b10-a1b1-fa2a39e0d2ae?quicklink=index&overridelayout=true]
and more specific INTERFACE MONITORING SET UP GUIDE under
https://service.sap.com/bpm --> Media Library --> Technical Information this gives details about how to use PI monitoring with Business Process Monitoring and explains the automated alert monitoring of all interface technologies like IDOC, qRFC, tRFC.....
Please check
Thanks
Jansi

Need help in Solution Manager certification

Hi All,
I am appearing for Solution Manager certification in Dec'2007. Please send me some documentation regarding solution Manager. Please email to the following : [email protected]
Appreciate all your help.
Thanks in Advance.
Harish.

Hi Harish,
The documents are not available as a free download. You must join the SAP education to obtain the training & material.
Kind regards,
Sundar

How to Configure Solution Manager 3.2 for Support Desk

Please give me information for configure solution manager 3.2 for support desk. What r the steps to configure ?.
satinder lamba

Hi,
Check these
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
/people/kamran.ellahi2/blog/2006/01/13/setting-up-sap-service-desk-123-and-go
https://websmp201.sap-ag.de/~sapidb/011000358700001197002005E/Addtional_Information.pdf
This will allow you to succeed in configuring your Service Desk.
Feel free to revert back.
--Ragu

Solution Manager information for Java stack systems

Hi,
Could someone please help with the setup of Solution Manager, and how to connect to the backend of a Java stack system. For our ERP systems this is working via RFC, but I was hoping to get more information on the procedure for java. I can specify manually via SMSY, but I am sure there must be a setup that can pull the information for the system itself. Could anyone shed some light on this if possible please.
Regards,
Chris

Dear Chris,
ABAP Stacks use RFC as you know for inter system communications.
Java stack systems use Solution Manager Diagnostics.
You will need to run Solman_Setup > Managed System Configuration
First you should visit the link http://service.sap.com/diagnostics
There you will see a link to the media library, and there you will find complete documentation.
Hope you find this information Helpful.
Regards,
Paul

Solution Manager systems RAM requirements - problems with the Java Engine

Hello,
I am about to install SAP Solution Manager 7 on a WIndows 2003 Server x64 but I need to know what the RAM requirements are? I have been having problems with the Java Engine starting and it seems to time out, I have heard that this is a very RAM hungry process and it might be why?
Many thanks for your help in advance,
Omar

Hello Omar,
To size SAP Solution Manager 7.0 EHP1 we recommend to use the SAP Solution Manager Quicksizer Tool at:
http://service.sap.com/sizing-solman
Here you find information on how to use the tool, how to collect input data for E2E Scenario Sizing, on SAP E2E RCA Sizing, Introscope Tuning, Wily Enterprise Manager Cluster Setup for E2E RCA Scenario and BI Aggregation Strategy in E2E Scenario.
Please find more information about installing Solution Manager in:
http://service.sap.com/instguides -> SAP Solution Manager
I hope this information helps.
Thanks,
Mark

Solution Manager Create remote monitoring entry

Hello,
I need some help or clarification please. We just upgraded our Solution Manager to EHP1 spk25 and I'm trying to setup Solman to support central system monitoring. I'm on the last step to enter the moitored ABAP system in CEN through RZ21 Techincal >Configure Central System>Create remote monitoring entry.
I can enter my own System ID but can't enter the RFC destination ? These default to *_RZ20_Collect and *_RZ20_Analyze. I want to use the RFC's already in place through Charm since these are already setup and working correctly. Can someone tell me how to change this or why we have to use the defaults.
Thanks in advance
Stephanie

Please disregard.
Thanks

Solution manager for ABAPers

Hi All,
Can you please explain me the importance of Solution Manager in an ABAPer's perspective? In which phases of Solution manager, does an abaper come into picture?
Thanks in advance.

Hello,
As per my understanding, ABAPer need not to work on Solution Manager, except for creating transport requests. It is a wonderful tool by SAP but only for BASIS guys.
In our project, we even don't create the Transport request so we need not to login to Solution Manager(SM). We request our Basis coordinator for Transport and they create the same for us.
The benefit of SM to us: we need not to maintain the sequence of transports when we will move the developments to QA / Production system. SM takes care of all the transports and there sequencing. So no need to maintain an excel file for dependencies & sequence of transport requests for integration. Thanks to SAP
Hope I make some sense here
Regards,
Vishal

Solution Manager implementation sequence

Hi Experts,
Need some quick advice, please
I am done with my Solution Manager 7.0 ehp1 Installation, Post Installation activity. Further so far I have configured the SAP ROUTER.
Now, could you please let me know in what sequence are the following to be taken up
1. Connecting Satellite systems with Solution Manager System.
2. Initial/Basic & Managed System Configuration
3. Maintenance Optimizer Configuration
4. Service Desk and EWA Configuration
Kindly let me know whats the sequence I should be following and also if I have missed something important please point it out.
Many Thanks in Advance..

Hi
Simply run Solman_setup tcode and just follow the steps
https://websmp106.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000066952009E
it is wizard in which you first do initial or basic setup
followed by managed system and other config
so in short your sequence will be automatically guided by this transaction
later you can configure EWA and service desk
hope it ans ur query
regards
prakhar

Solution Manager Enhancement Package 1 issue with SAINT

Short Text
Solution Manager Enhancement Package 1 issue with SAINT
Long Text
Hi,
We are trying to install the SAP Solution Manager Enhancement Package 1
using SAINT. We have encountered an issue while trying to use the Stack
Configuration option withing SAINT.
Issue 1: A message appears saying OCS Package SAPK-701DHINSAPBASIS does
not match current software component vector" . Whats does that mean and
how do we resolve this issue?
Issue 2: Ignoring the above message and going forward, we see the
import condition page where it fails saying BBCPRM component must not
be installed in this system
Please check the attahed screen shots for the current Software
Component levels and the errors.
Please help to resolve the above issue and explain if we are missing
anything here.
Thanks,
Nag Koppuravuri

For the errors like ...
"OCS Package <Package Name> does not match current software component vector" will usually appears when the upgrade is not matching the "MINIMUM support package level"
Check note 1182336 - Though this note is not for the support package you are applying but the error points to same direction.
To solve your problem...
Please check the "Update Guide SAP Solution Manager 7.0 EHP 1 " available on Market place.
Go to Service Market place -> Release & Upgrade Info -> Installation and Upgrade Guide
To your left dropdown SAP Components -> Solution Manager -> Release 7.0 EHP 1 and on the right panel check above document Section "Preparations"
If you satisfy those conditions I think you should be able to apply EHP1 smoothly.
Lets us know if anything...
Cheers!

Getting this error when trying to install solution manager...Please help!!!

ERROR 2010-06-01 11:59:43.214 [synxccuren.cpp:78]
 CSyCurrentProcessEnvironmentImpl::setUser()
FSL-00001 System call failed. Error 1326 (Logon failure: unknown user name or bad password.
) in execution of system call 'LogonUser' with parameter (ntadmin, wdflbmd0360, *******, LOGON32_LOGON_INTERACTIVE,LOGON32_PROVIDER_DEFAULT,&hUserToken), line (1015) in file (synxccuren.cpp).
TRACE 2010-06-01 11:59:43.479 [iaxxejsbas.hpp:408]
 handleException<ESyException>()
Converting exception into JS Exception ESyException.
TRACE 2010-06-01 11:59:43.479
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException
ERROR 2010-06-01 11:59:43.479
 CJSlibModule::writeError_impl()
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
TRACE 2010-06-01 11:59:43.479 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2010-06-01 11:59:43.542 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_Users_Create|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
TRACE 2010-06-01 11:59:43.557 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP Solution Manager 7.0 EhP1 > Software Life-Cycle Options > Additional Preparation Options > Operating System Users and Groups( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/LM/USR. </body></html>
TRACE 2010-06-01 11:59:43.557 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2010-06-01 12:00:05.386 [sixxcstepexecute.cpp:1003]
An error occured and the user decided to stop.\n Current step "|NW_Users_Create|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0|setUserEnvironment".

Hi, I am facing something like only.
I have windows 2008 Server 64 Bit/Oracle 11g 64 bit and trying to install SAP BI 7.0.
Please have a look at the log below:
WARNING[E] 2013-06-26 20:10:20.152
FSL-06002 Error 1722 (The RPC server is unavailable.
) in execution of a 'OpenSCManager' function, line (130), with parameter (ServicesActive).
WARNING[E] 2013-06-26 20:10:20.152
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2013-06-26 20:10:20.152
FCO-00011 The step setDefaults with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|NW_getDBInfo|ind|ind|ind|ind|2|0|NW_getDBInfoGeneric|ind|ind|ind|ind|2|0|setDefaults was executed with status ERROR .

Please assist me in conf of solution manager

Similar Messages

Maybe you are looking for