Please can anybody help me how to create the job by using HR_JOB_API?

hi,
actually i tried by using this,but iam not able to do that.
1.should we create job definition before job creation?
2. should we create flexfield segment values before job definition?
3. what are the parameters we have to give mandatatory?
up to my knowledge when we crate job from front end then automatically job definition and job will be created.
but here how to do that please let me know.
and if u have any sample code please send me as soon as.
if jobdefinition and flexfield vlues must be defined before job creation then let me know how to create jobdefinition and flexfield values.

ever thought about attending a training? When you think this is not needed, please read the flex guide, then the hr guide, and then scan some metalink notes on hrms api's.
good luck,
thierry

Similar Messages

Need help on how to create the simple mapping using ORACLE DATA INTEGRATOR

Hi guys,
am new to learn odi.. please share me or steps how to develop the simple mapping using ODI...

Hi,
I am a newbie to Oracle Data Integrator as well. You should have a look here first; http://www.business-intelligence-quotient.com/?p=379
Try to play around with ODI and then come back if you have specific questions. You should better move to this ODI-forum; Data Integrator
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

I have an iphone 4 jammed in MDU mode, I conect to itunes and asked to restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1. Can anybody help me how to restore my iphone

I have an iphone 4 started the problem saying no service, then when restarting asked to connect to itunes and became jammed in MDU mode, I connect to itunes and clicked on restore, it went through all the steps and nearly completed it gives me an error message saying cannot be restored error -1. Can anybody help me how to restore my iphone. or what to do next, some reseller asked me to go the shop where I bought to replace it for me as this error cannot be restored by any shop. It has to be returned to apple and get it replaced. The warranty already expired and don't know what to do.
Please help

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error1

Please can anybody help me. My itunes will not open on my laptop desktop.I have not changed anything on the laptop of significance.What can I do?

Please can anybody help me? For no apparent reason or significant changes to my laptop I cannot open itunes from my desktop icon.I have uninstalled the whole product and re-installed it. But to no avail. I am very frustrated and cannot access my library or add to my ipod.Any help would be really helpful. I am on Windows7 Pro. Thank you

Uninstall and reinstall from scratch.
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Can anybody tell me how to create other mailboxes besides inbox,sent and trash on my iPhone4?

can anybody tell me how to create other mailboxes besides inbox,sent and trash on my iPhone4?

You can't create any mailboxes directly on your phone. Mailboxes/Folders have to be created on the mail server, then synced to your phone. This requires an IMAP account, as such is not possible with a POP account. Sounds like you have a POP account, if so you cannot create any mailboxes/folders.

HT201210 Please can you help? How do i reset my lock screen on ipod. I have connected to itunes on the original computer it was set up on however the code i thought i entered does not work. thanks in advance

Please can you help? How do i reset my lock screen on ipod. I have connected to itunes on the original computer it was set up on however the code i thought i entered does not work. thanks in advance

Connect the iPod to irs syncing computer and restore via iTunes/ Place the iPod in Recovery mode if necessary to allow the restore.

I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
Temporarily disable wireless encryption.
If you are hidding the SSID, disable that feature.
Change the Mode Select setting to: 802.11g Only
Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11

Can anybody tell me how to install the soft phone tool in Interaction Center?

Hi,
Can anybody tell me how to install the soft phone tool in Interaction Center?
Regards
Raju

Hi Yoro,
it depends on your environment - if siemens provides some kind of SAP connector for CRM, then you can even work with deskphone. The CTI server is always responsible for communicating with both terminal and CRM server.
Example: customer calls through IVR and finally reaches operator with deskphone and CRM. The CTI server will ring the hardphone and at the same time sends signal Alerting with additional data to SAP CRM. The signal is communicated via SOAP using web service call.
The agent hear ringing from the deskphone and he can see on his CRM Interaction Center caller's number, associated name and company, which options the caller selected in IVR and so on. Now based on the CTI capability, he can click Accept in CRM and the call will picked by the deskphone, or he can reject the call, again from CRM.
In case you use siemens softphone then again, the CTI talks to both softphone and SAP CRM server. CRM simply does not care, whether the CTI channels the call to a softphone or a hardphone..
Ask your vendor for SAP connector for CRM, if there is any. Different CTI vendors supplies their connector (and usually license them separately). For instance, Genesys has Gplus adapter for SAP, Cisco offers its partner's solution from Bucher+Sutter, Solidus has also some licensed connector and so on.
What I have described is a server-server scenario. In such case, the CRM does not care where is the terminal, because the CTI takes care of it.
However, I have also seen one solution based on client-client integration. In that case, CRM Interaction Center talks to a softphone directly on operator's workstation. This is not supported by SAP and must be delivered on project basis.
Regards,
Dawood.

Please can anyone tell me how to download the flash player to allow virgin anytime on ipad3

Hi There,
Please can anyone tell me how to update the flash player on ipad3 to allow virgin anytime to play?
Regards
Gary

Adobe has not made a version of Flash for the iPad.
Kappy explains why. https://discussions.apple.com/message/19446567#19446567
5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
Top 4 browsers supports flash player on iPad and iPhone
http://mashtips.com/flash-player-ios/
 Cheers, Tom

I have an Apple I Phone 4S which is great but, can someone help me how to get the photos and videos to my PC which runs on MS XP. I would like to be able to edit and copy to a DVD.

I have an Apple I Phone 4S which is great but, can someone help me how to get the photos and videos to my PC which runs on MS XP. I would like to be able to edit and copy photos and videos to a DVD.

Connect your iPhone to your computer. Tp your pc should recognize your iPhone as a camera. Use what ever application you have on the pc to transfer files from a camera to your computer.

Plz can anybody tell me how to color the whole UIButton

Plz can anybody tell me how to color the whole UIButton

You can set image on your button (just change an image with the color which you want)
[button setBackgroundImage:newImage forState:UIControlStateNormal];
[button setBackgroundImage:oldImage forState:UIControlStateHighlighted];

How to create the sales order using BAPI's ....?

Hi Guru's,
could you please provide how to create the sales order using BAPI's .....i need step by step process and please provide the details from scratch....basically i don't have basic knowledge on this....please provide required inputs ....:)
thanks in advance
Srinivas......

Hi Guru's thanks for your inouts and your valuble time...
please find the program logic below...
*& Report ZAREPAS30
REPORT zarepas30.
DATA : gs_vbeln                   TYPE vbak-vbeln,
       gs_order_header_in         TYPE bapisdhd1,
       gs_order_header_inx        TYPE bapisdhd1x,
       gt_order_items_in          TYPE STANDARD TABLE OF bapisditm,
       gwa_itab1                  TYPE bapisditm,
       gt_order_items_inx         TYPE STANDARD TABLE OF bapisditmx,
       gwa_itab2                  TYPE bapisditmx,
       gt_order_partners          TYPE STANDARD TABLE OF bapiparnr,
       gwa_itab3                  TYPE bapiparnr,
       gt_return                  TYPE STANDARD TABLE OF bapiret2,
       gwa_itab4                  TYPE bapiret2.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Requested Delivery Date
PARAMETERS: p_edatu TYPE edatu OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
gs_order_header_in-doc_type = p_auart.
gs_order_header_inx-doc_type = 'X'.
Sales organization
gs_order_header_in-sales_org = p_vkorg.
gs_order_header_inx-sales_org = 'X'.
Distribution channel
gs_order_header_in-distr_chan = p_vtweg.
gs_order_header_inx-distr_chan = 'X'.
Division
gs_order_header_in-division = p_spart.
gs_order_header_inx-division = 'X'.
Reguested Delivery Date
gs_order_header_in-req_date_h = p_edatu.
gs_order_header_inx-req_date_h = 'X'.
gs_order_header_inx-updateflag = 'I'.
Partner data
Sold to
gwa_itab3-partn_role = 'AG'.
gwa_itab3-partn_numb = p_sold.
APPEND gwa_itab3 TO gt_order_partners .
ship to
gwa_itab3-partn_role = 'WE'.
gwa_itab3-partn_numb = p_ship.
APPEND gwa_itab3 TO gt_order_partners .
ITEM DATA
gwa_itab2-updateflag = 'I'.
Line item number.
gwa_itab1-itm_number = '000010'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
Line item number.
gwa_itab1-itm_number = '000020'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant    = p_plant.
gwa_itab2-plant   = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
    order_header_in               = gs_order_header_in
    ORDER_HEADER_INX              = gs_order_header_inx
IMPORTING
    SALESDOCUMENT                 = gs_vbeln
tables
    RETURN                        = gt_return
    ORDER_ITEMS_IN                = gt_order_items_in
    ORDER_ITEMS_INX               = gt_order_items_inx
    order_partners                = gt_order_partners.
Check the return table.
LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
    WRITE: / 'Error occured while creating sales order '.
ELSE.
Commit the work.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE: / 'Document ', gs_vbeln, ' created'.
ENDIF.

Can anybody help me how can I get a 1000 contact numbers in an excel spreadsheet into Blackberry

Can anybody help me I have just purchased a Blackberry curve 8900 and I want to know how can I get a 1000 contact numbers in an excel spreadsheet or note pad file into my phone, is there anyway of transferring the numbers across rather than me having to do it manually one by one, thanks
Solved!
Go to Solution.

Hi and welcome to the forums!
Origami?
You can transfer the excel spreadsheet in to a .csv file and import to Outlook.
Or use desktop manager (see link below)
Do you have these numbers on another device?
What version of Windows, Outlook, desktop manager etc. are you using?
Thanks,
Bifocals
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11194&sliceId=2&docTy...
Message Edited by Bifocals on 06-02-2009 06:19 AM
Message Edited by Bifocals on 06-02-2009 06:59 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Hello friends, my itunes has stopped working. and the problem report stated the following: Fault Module Name:     KERNELBASE.dll   Fault Module Version:     6.1.7601.17514.................. please can anybody help me?hello friends, my itunes has stopped w

Hello everybody> my itunes has stopped working and the problem report stated the following:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    iTunes.exe
Application Version:    10.5.3.3
Application Timestamp:    4f14cc3d
Fault Module Name:    KERNELBASE.dll
Fault Module Version:    6.1.7601.17514
Fault Module Timestamp:    4ce7b8f0
Exception Code:    80000003
Exception Offset:    0003381b
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
can anybody help me?

Are you seeing a similar message when launching QuickTime Player?
What security software is installed on the computer? Have you tried testing in an admin account or after uninstalling tthe security software?
Use one of the following articles to guide you through removing iTunes and the related QuickTime files.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Can anybody suggest me how to creat match code id and object

hi Gurus,
can any body suggest me how to create match code object and match code id..
in my program i need specific values in search help..
to avoid confusion in selecting the values.
i need only selcted values..
thanks in advance.
vijay chavan

Hi
In Older SAP versions Match codes are used, now they are replaced by SEARCH HELPs
there 2 types of search helps
Elementary and Collective
see the doc and create accordingly
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=2176485
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=3601619
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
https://forums.sdn.sap.com/click.jspa?searchID=4390517&messageID=1712818
Collective search help Combine several elementary search helps. A collective search help thus can offer several alternative search paths.
A Collective search help provides alternative search
Paths by combining elementary search helps.
Only one search help can be attached to a field, table or data element. Several search paths are therefore attached with a collective search help.
A collective search help also has interface parameters like
an elementary search help.
Like an elementary search help, a collective search help has an interface of IMPORT and EXPORT parameters with which the search help exchanges data. Using this interface, the collective search help can be attached to fields, tables and data elements exactly like an elementary search help.
Parameter assignment needs to be done for each of the
Included search helps.
When you define a collective search help, there are no components for describing the dialog behavior and data selection; instead the included search helps are listed here. You must assign the parameters of the collective search help to the interface parameters of the included search help for each inclusion.
User may choose the tab and thus the elementary
search maethod.
When we execute the search help SCUSTOM, we are confronted with a dialog which gives us an option of either restricting
By 1)Search for customer according to booking
2)Search for customer according to name.
These are effectively the elementary search helps (SCUSTOM_BOOK and SCUSTOM_NAME) which have been included in the collective search help SCUSTOM.
HOT KEY
The hot key is used to select the elementary search help from the collective search help and to enter the restrictions in the dialog box for restricting values directly from the entry field. If the user often searches for values using the same search help, this procedure can save time.
Steps to create a Collective Search Help
1)Enter the search help name and click on create.
2)Choose Collective search help radio button option as the search help type.
3)Enter the search help parameters.
4)Instead of the selection method, we enter the included
search helps for the collective search help.
5)We need to assign parameters for each of the included
search helps.
6)Complete the parameter assignment by clicking on the push button
7)Collective search help offers the user to obtain F4 help
using any of the included search helps.
Regards
Anji

Please can anybody help me how to create the job by using HR_JOB_API?

Similar Messages

Maybe you are looking for