Please can anyone explain a surge in Console messages?

I'm running OS 10.6.7, Safari 5.0.5 on an iMac, model identifier 9,1, Intel core duo, processing at 2.66 ghz.
Looking at my Console logs, I see a multitude of messages that look like this:
30/04/2011 13:06:34          [0x0-0x36036].com.apple.Safari[540]          Canceleld; 0; Empty 1
[The misspelling of 'cancelled' is pasted directly from the log.]
each group of repetitions is followed by this:
30/04/2011 13:06:34          [0x0-0x36036].com.apple.Safari[540]          *** process 540 exceeded 500 log message per second limit  -  remaining messages this second discarded ***
The most recent changes made prior to this epidemic were as follows:
A few days ago, in order to stop endless "attempt to pop an unknown autorelease pool" messages about Western Digital Drivemanager, I got rid of the WD drive manager, but continue to use a Passport external drive for Time Machine without any obvious problems
A few days before that, I upgraded from Safari 5.0.4 to 5.0.5
I'd be interested to hear if anyone is has seen similar behaviour, which makes it hard to read other Console messages, and very grateful to hear any suggestions or solutions.

Looks like the problem stems from that update. I'd post here where the Safari people may be more able to help you. You want to take care of this not only because it's making it difficult to read in Console, but because these errors will eat up your drive space.
https://discussions.apple.com/community/mac_os/safari?view=discussions&tagSet=10 41#/?tagSet=1042

Similar Messages

  • HT3275 Please can anyone explain this to me

    Please can anyone explain this to me - thank you -
    Time Machine couldn't complete the backup to time capsule - The backup disk image “/Volumes/Data-1/Alyson’s iMac.sparsebundle” is already in use.

    The explanation is a long standing bug in Lion and Mountain Lion, but what you might really be asking is how to fix the problem.
    Pull the power cord from the back of the Time Capsule
    Wait a few minutes
    Plug the power cord back in
    If that does not fix the problem you will need to dig deeper.  See #C12 in Pondini's excellent Time Machine - Troubleshooting.
    http://pondini.org/TM/Troubleshooting.html

  • Can anyone explain how to read error messages such as this one?

    i'd like to know how to interpret these myself...
    Interval Since Last Panic Report: 1996639 sec
    Panics Since Last Report: 1
    Anonymous UUID: BCA990A0-5F91-4C2A-ACEB-642046FD1354
    Tue Aug 3 00:16:02 2010
    panic(cpu 1 caller 0x2a8ab2): Kernel trap at 0x00297ca4, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x00000008, CR3: 0x00101000, CR4: 0x000006e0
    EAX: 0x00000008, EBX: 0x03a698d4, ECX: 0x04ba63d4, EDX: 0x00000008
    CR2: 0x00000008, EBP: 0x291f3fc8, ESI: 0x00000000, EDI: 0x057737a8
    EFL: 0x00010202, EIP: 0x00297ca4, CS: 0x00000008, DS: 0x00000010
    Error code: 0x00000000
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x291f3dd8 : 0x21b455 (0x5cf328 0x291f3e0c 0x2238b1 0x0)
    0x291f3e28 : 0x2a8ab2 (0x591664 0x297ca4 0xe 0x59182e)
    0x291f3f08 : 0x29e9a8 (0x291f3f24 0xc 0x57737a8 0x291f3fc8)
    0x291f3f1c : 0x297ca4 (0xe 0x291f0048 0x220010 0x10)
    0x291f3fc8 : 0x29e6cc (0x84991c 0x0 0x246 0x57791ac)
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10F569
    Kernel version:
    Darwin Kernel Version 10.4.0: Fri Apr 23 18:28:53 PDT 2010; root:xnu-1504.7.4~1/RELEASE_I386
    System model name: MacBook1,1 (Mac-F4208CC8)
    System uptime in nanoseconds: 6787581048140
    unloaded kexts:
    com.apple.driver.AppleUSBAudio 2.7.3f1 (addr 0x464d0000, size 0x192512) - last unloaded 2479736372625
    loaded kexts:
    com.silex.driver.sxuptp 1.2.3
    com.Cycling74.driver.Soundflower 1.4.2
    com.serato.usb.kext 1.8.4
    com.hzsystems.driver.CDSDAudioCaptureSupport 1.5
    com.apple.filesystems.afpfs 9.7 - last loaded 2418759467914
    com.apple.nke.asp_tcp 5.0
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AppleHDA 1.8.7f1
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.driver.AudioAUUC 1.4
    com.apple.driver.AppleUpstreamUserClient 3.3.2
    com.apple.driver.AppleIntelGMA950 6.1.6
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.2
    com.apple.driver.AppleIntelYonahProfile 14
    com.apple.driver.AirPort.Atheros 423.19.10
    com.apple.driver.ACPISMCPlatformPlugin 4.1.2b1
    com.apple.driver.AppleLPC 1.4.12
    com.apple.driver.AppleBacklight 170.0.24
    com.apple.driver.AppleIntelIntegratedFramebuffer 6.1.6
    com.apple.driver.AppleIRController 303.8
    com.apple.driver.AppleUSBTrackpad 1.8.1b1
    com.apple.driver.AppleUSBTCKeyEventDriver 1.8.1b1
    com.apple.driver.AppleUSBTCKeyboard 1.8.1b1
    com.apple.iokit.SCSITaskUserClient 2.6.5
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage 1.6.2
    com.apple.driver.AppleFWOHCI 4.7.1
    com.apple.iokit.AppleYukon2 3.1.14b1
    com.apple.driver.AppleAHCIPort 2.1.2
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleUSBHub 4.0.0
    com.apple.driver.AppleIntelPIIXATA 2.5.1
    com.apple.driver.AppleUSBEHCI 4.0.2
    com.apple.driver.AppleUSBUHCI 4.0.2
    com.apple.driver.AppleEFINVRAM 1.3.0
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AppleACPIButtons 1.3.2
    com.apple.driver.AppleSMBIOS 1.6
    com.apple.driver.AppleACPIEC 1.3.2
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 105.10.0
    com.apple.security.sandbox 0
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 105.10.0
    com.apple.driver.DspFuncLib 1.8.7f1
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.iokit.IOSurface 74.0
    com.apple.iokit.IOBluetoothSerialManager 2.3.3f8
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.7.6fc2
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.8.7f1
    com.apple.iokit.IOHDAFamily 1.8.7f1
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.iokit.IO80211Family 311.1
    com.apple.driver.IOPlatformPluginFamily 4.1.2b1
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.AppleSMC 3.0.1d2
    com.apple.iokit.IONDRVSupport 2.1
    com.apple.iokit.IOGraphicsFamily 2.1
    com.apple.driver.CSRUSBBluetoothHCIController 2.3.3f8
    com.apple.driver.AppleUSBBluetoothHCIController 2.3.3f8
    com.apple.iokit.IOBluetoothFamily 2.3.3f8
    com.apple.driver.AppleUSBMergeNub 4.0.0
    com.apple.iokit.IOUSBHIDDriver 4.0.2
    com.apple.driver.AppleUSBComposite 3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOATAPIProtocolTransport 2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IONetworkingFamily 1.9
    com.apple.iokit.IOAHCIFamily 2.0.4
    com.apple.iokit.IOUSBUserClient 4.0.0
    com.apple.iokit.IOATAFamily 2.5.1
    com.apple.iokit.IOUSBFamily 4.0.2
    com.apple.driver.AppleEFIRuntime 1.3.0
    com.apple.iokit.IOHIDFamily 1.6.4
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 283
    com.apple.iokit.IOStorageFamily 1.6.1
    com.apple.driver.AppleACPIPlatform 1.3.2
    com.apple.iokit.IOACPIFamily 1.3.0
    com.apple.iokit.IOPCIFamily 2.6
    Model: MacBook1,1, BootROM MB11.0061.B03, 2 processors, Intel Core Duo, 2 GHz, 2 GB, SMC 1.4f12
    Graphics: Intel GMA 950, GMA 950, Built-In, spdisplaysintegratedvram
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x86), Atheros 5424: 2.0.19.10
    Bluetooth: Version 2.3.3f8, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD3200BEVT-22ZCT0, 298.09 GB
    Parallel ATA Device: MATSHITADVD-R UJ-857
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000
    USB Device: USB 2861 Device, 0x1b80, 0xe302, 0xfd100000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x7d100000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0217, 0x1d200000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000

    ...in the meantime, can you all tell me what happened based on my report?
    Without any other details about your system, my guess would be one or more of the four non-Apple kernel extensions are your problem:
    com.silex.driver.sxuptp 1.2.3
    com.Cycling74.driver.Soundflower 1.4.2
    com.serato.usb.kext 1.8.4
    com.hzsystems.driver.CDSDAudioCaptureSupport 1.5
    From the log, something seems to have replaced the AppleUSBAudio driver, so it may be a combination of some of these four that are causing the panics.
    If you could describe your system in some detail, especially about audio & USB related things you use, it would help.

  • My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
    BTW the ipod is an ipod video not classic if that makes any difference.
    Thanks

  • Can anyone explain this to me, please. It's a static section question.

    Can anyone explain this to me, please. It's a static section question.
    I came across the following style of programming recently and I would like to know what the Static section is actually doing in the class. Thx.
    Here is the code.
    public class ClassA {
         private static Hashtable ClassAList = new Hashtable();
         private ClassB cB;
         private Vector goodLink;
         private Hashtable classCList;
         static
              ClassA cA = new ClassA();
              ClassAList.put("whatever", cA);
         public static ClassA getClassA()
              return (ClassA) ClassAList.get("whatever");

    hi,
    The static section shall be loaded before it's constructor is called. (i.e at the time of loading the class). Therefore making it available for any other objects to call.
    hope this clarifies ur question
    prasanna

  • Can anyone explain what the 'other' storage consists of and how I can decrease the size please?

    Can anyone explain what the 'other' storage consists of and how I can decrease the size please?

    Welcome to Apple Support Communities
    "Other" refers to OS X files, caches, downloads, documents. See Other in this website > http://pondini.org/OSX/LionStorage.html
    I would not worry about Other because they contain files that you need, but if you want to decrease the size, start deleting downloads and documents

  • When i go to my music and play a song it sounds like my headphones are blown but when i play songs on youtube they sound fine, can anyone explain this to me? please and thank you

    when i go to my music and play a song it sounds like my headphones are blown but when i play songs on youtube they sound fine, can anyone explain this to me? please and thank you

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      

  • "System/Library/Extensions/CDSDAudioCaptureSupport.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact product's vendor for an update. Can anyone explain what it refers to.

    System extension cannot be used
    The system extension "System/Library/Extensions/CDSDAudioCaptureSupport.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact product's vendor for an update. Can anyone explain what it refers to.

    Please take a look at Kappy's solution and the following comments about Toast.

  • HT1430 I downloaded the lateest update and I can't turn off my apps like I did on 6os. The 7os is different and I can't seem to find out if apps turn off now by just closing them. Can anyone explain this to me? Please

    I downloaded the lateest update and I can't turn off my apps like I did on 6os. The 7os is different and I can't seem to find out if apps turn off now by just closing them. Can anyone explain this to me? Please

    Double tap the Home button and swipe the app preview page up
    iOS 7  also allows apps to run while they aren't open.
    You can manage these here:
    Settings > General > Background App Refresh

  • Imac wont start after electricity went off, no power surge. Apple Hardware Test ,no trouble found, please can anyone help,thanks ,Andy

    Hi, please can anyoner help. I had a power cut at home and went to switch the imac back on and all i can get is a  grey screen, a chime and a circle going around but no blue screen when I start up .I have tried pressing the power button for ten seconds with it switched off .Tried installing back up discs and after about an hour it comes up with an error that caused installation to fail and to contact the software manufacturer,   tried again and the same happened. Tried apple hardware test and test results say no trouble found so am trying the extended test .any help would be great, thanks,Andy. 

    Try resetting the smc and pram.
    To reset the smc
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    To reset pram
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Can anyone explain how to post the manual entries in BCS?

    Hi All,
    Can anyone explain how to post the manual entries in BCS?

    Dear,
    Depands on posting level.
    There is Manual Posting  under Consolidation Functions.
    Please creat document and task.
    Next you add this task for consolidation monitor. There is "Consolidation Monitor " and you choose Hierarchy task and add your task for manul data.
    In document you kind in mind: choose manula posting !!!!!!!!!!!!!!!!!!!!!  in page tab Propertis under Posting!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.
    If you would like to entry in posting level 01 or 10, please choose Local currency and trasaction currency +- group currency.
    If you would like to entry in posting level 20 or 30, please choose Group currency.
    In SEM_BCS are posting level is very important. 
    Regards,
    anka

  • Can anyone explain what a condition type means in pricing.

    Hi,
    Can anyone explain what a condition type means in pricing. And how to create condition type and how it effects Pricing conditions.
    As I am new to this area. Detailed explanation is highly appreciated.
    Thanks a lot,
    Rasheed

    Hello Rasheed,
    Below mentioned are the few important things related to pricing.
    - You first define Condition Tables .
    - Define Access Sequence and assign condition tables to it.
    - Define Condition Type and assign Access Sequence to it.
    - Now define Pricing Procedure and assign Condition Type to it.
    - Now you define Pricing Procedure Determination using Sales Org, Distribution    Channel ,Division,Document  Pricing Procedure and Customer Pricing Procedure which are the key fields.
    The above steps can be done in SPRO.
    -Now maintain the Condition Records(for eg:For the specific material what is the cost or for a specific customer what is the cost of the specific material etc) using Txn:VK11.
    - Once you maintain the Condition Records , you can reflect the same values in Condition Type in SPRO.
    Hope this information is helpful for you to relate Condition Type in Pricing,
    Please reward with points if this information is helpful for you.
    Regards,
    Shanthala.

  • Can anyone explain me concept of Recursion?

    Hi All,
    Im struggling for understanding the concept of Recursion from past many days . can anyone please explain me how it works with the below example.
    public class Permutation {
         * @param args the command line arguments
         public static String name;
        public static void main(String[] args)throws Exception {
        DataInputStream dis=new DataInputStream(System.in);
        name=dis.readLine();
        permutation("", name);
        private static  void permutation(String prefix,String str){
            int n=str.length();
            if(n==0){
                System.out.println(prefix);
            }else{
                for (int i = 0; i < str.length(); i++) {
                 permutation(prefix+str.charAt(i),str.substring(0, i)+str.substring(i+1, n) );
        }Thanks and Regards,
    Mahesh M
    Edited by: Mahesh M on 13 Feb, 2013 7:31 AM
    Edited by: EJP on 13/02/2013 20:25: revised your bizarre formatting to use {noformat}{noformat} tags: please use them.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    For help with recursion, see this question: Can anyone explain me concept of Recursion?

  • Can ANYONE explain this IDIOCY?

    If I have an IFieldObject or ITextObject with the default height of 221 twips for an Arial 8.25pt or Tahoma Bold 8.25 font.
    Why is that a IBoxObject where I set the Top the same as my IField or ITextObject and set the bottom to the Top + 221 twips, the bottoms DON'T LINE UP. Aren't they all 221 twips in height, right?
    Same goes with the width...It befuddles me to work in this designer and not have things equal. Also, why in the world would they not give the IBoxObject a HEIGTH property?
    How wide is the crSingleLine? 20 twips? I understand that when you set the border the actual height/width grows but the values don't reflect it, is that true?
    Can anyone explain the idocy of the measurements and drawing elements in this, used to be good but now is a piece of crap, product? Is there any documentation on this "feature" anywhere? I can't find anything about this in the user guides or help. I'm using 10.2.3600 (sp1) in VS.Net2005 (w/VB.net)

    I have deleted the last reply because of the language used in it. I am also locking this thread so no more replies can be added to it.
    If you want to get replies to your postings please follow the rules of engagement: https://wiki.sdn.sap.com/wiki/x/FgQ
    Be professional, polite, and give us information we need to help you. Remember "us" is not just SAP but all of us in the forum community. Someone other then an SAP engineer may help you, just like you may one time elect help another community member's posting.
    Please feel free to repost your questions in this forum following the "Rules of Engagement". Not following these rules will get postings deleted or ignored.
    Kind Regards,
    Trevor Dubinsky
    Senior Engineer,
    SAP, Business Objects.

  • Can anyone explain to me why some of my photos are landing in events and others are appearing only in photo stream?

    I want to delete photos from camera roll on my iPhone to clear space to install ios7 but after importing photos to iPhoto on my macbook pro only 4 out of 339 photos taken in September landed in events, though all 339 are in Sept photo stream. It seems like on previous uploads all photos "fell" into events according to the day they were taken, as well as into photostream. I want to make sure these photos stick around permanently and do not exist only in photo stream where I imagine they will eventually be bumped from my computer (photostream). Can anyone explain why some of my photos are landing in events and others are appearing only in photo stream?

    You have uploaded two different things - pHotos are in one and only one event - if you have the same photo in two different events then you have imported it twice
    Please explain what you want - your initial question and yoru current comments are 180 degrees apart
    You say they are not all in events
    Can anyone explain to me why some of my photos are landing in events and others are appearing only in photo stream?
    Now you say they are
    All 15 pics appear in  Sept 2013 PS
    It sound to me like you have no problem except you imported some photos twice adn you may not understand how the automatic import form PS works - but that is not clear
    you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, to select Photo Stream > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture.
    The event they are imported into is MMMM YYYY PS
    If you import via iTunes sync or by connecting your IOS device via USB then they are importeed into the regular event structrue as defined in your iphoto preferences - and if you imoport via two or more different methods you will ahe duplicates
    LN

Maybe you are looking for