Please can somebody help- my iPhone is stuck in a loop after downloading IS6.1

Hi, wondering if anybody can help please
I upgraded my phone to IS6.1 - please note that I have always stuck to apples software and never tried to jailbreak it
On sat the phone just switched off despite having 20% battery left and wouldn't switch back on
When I plugged it into the mains the apple logo appeared after 3 mins and then displays a grey screen with IS06 displayed, I then slid the slider bar across and entered by password. This then displayed the docking sign - it wanted to connect to iTunes. I unplugged the iPhone to connect to my PC and the phone died again.
When I connect to the PC it never fires up. It displays the apple logo for 5secs and then switches off for 3 secs and continues in a loop.
I have tried charging for a day, replaced the battery (displays 100% full) and still the same thing happens time and time again
I have held the power and home button switch on and off and makes no difference
I have also tried holding the power button, plugging the phone into the PCM and then pressing the home button in hope that the iTunes docking sign would appear, but nothing
Convinced this is a software issue
The phone is out of warranty
Does anybody have any ideas.
Loosing the will to live!
Thanks in advance

restore with back up or if neccessary as new
http://support.apple.com/kb/HT4137
or this
http://support.apple.com/kb/HT1808

Similar Messages

My new I5 uploaded doubleded all the songs from my library! Please, can somebody help me showing how can I delete just the songs that was doubled?

Hi there everybody,
My new Iphone 5 uploaded doubleded all the songs from my library! Please, can somebody help me showing how can I delete just the songs that was doubled?
Some help will be greatly appreciate.
Thanks much!

When you say "account," do you mean your iTunes library, because your iTunes library is what is on your computer? Your iTunes library does not have an email address. An account that is related to iTunes is your Apple ID (which is an email address) and you use it as your user name to sign in to the iTunes Store, to make purchases. Changing your Apple ID will not make songs disappear from your computer's iTunes library.
If you had an Apple ID and used it to make song purchases from the iTunes Store, and then started using a different Apple ID, you should be able to re-download the songs purchased with the old Apple ID. In iTunes, sign in to the iTunes Store using your OLD Apple ID (and password). That may not be your current email address, but Apple uses it as your user name, so it does not matter.
On the iTunes Store Home screen, click on Purchased under QUICK LINKS. This takes you do the Purchased screen, where you can re-download previous song purchases (for that Apple ID) at no cost.
NOTE: If those song purchases are from more than a few years ago, you may also need to authorize your computer to play (and sync) songs for your old Apple ID.
For songs that were not purchased from the iTunes Store, if they are also gone, you cannot get them back unless you have a backup (or they are still loaded on your old iPod).
If that's not what you mean by "changed the email address on my account," please post back with more details.

Please can somebody help me? My imessage does not work, I try to activate it but it says an error ocurred during activation. try again :(

Please can somebody help me? My imessage does not work, I try to activate it but it says an error ocurred during activation. try again

Its possible that the server can be down now. Have you ever used it before? If you want, try resseting the phone by just holding the sleep/wake key and the home button together for 10 seconds. Then wait 5 seconds when it turns off and press the sleep/wake button to turn it back on. Then try it again. Let me know what the results are.

HT201210 How can i stop loosing all my videos, music, pics etc after an IOS update? PLEASE can somebody help me as i've lost everthing the last time i proceeded with this update so this time my mam thought she was doing the right thing by updating my phon

How can i stop loosing all my videos, music, pics etc after an IOS update? PLEASE can somebody help me as i've lost everthing the last time i proceeded with this update so this time my mam thought she was doing the right thing by updating my phone!! :C

everything should be on your computer.
If you do as you should and make sure that everything is on your computer, then you should lose nothing.

Please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.

please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing ' ' 1274181950 464843899 1233118628 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Since i updated my ipad 2 in to ios 7 my ipad became lag and many of my apps hang and crash im not jailbroken please can somebody help?

My ipad became lag and always hanging Before it was not like that when i was in ios 6 but when im now in ios 7 its not lag , hanging and crashing please can somebody help

Try to reset the device:
*Device reset*
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Can anyone help? iPhone 3gs stuck in loop.

Hi,
My iphone 3gs had a little accident with water, it has since dried out and had a new battery. However it now decides to show the Apple logo and then turn itself off thus not being recognised by iTunes in order for me to conduct a full restore. Have tried holding the home and power button together to stop the loop but to no avail. Can anyone help? Otherwise my phone may be flyng as well as having had a swim!
Many thanks.

You could have gotten an out of warranty replacement phone for the liquid damage. Unfortunately, as soon as the phone was opened up, it became ineligible for the OOW replacement program.
Either the water damage did more than just hose the battery, or whoever replaced the battery borked the phone big time.

HELP! iPhone 3GS stuck in recovery loop and iTunes gives error message" iPod update server can not be contacted"

As I said, it's an iPhone 3GS (never jailbroken), iOS 4.1, PowerPC G4 OS X 10.4.11, iTunes 9.2. I have had the phone since new, never had any issues with it and am at my wits end trying to figure it out. I have seen many different solutions to this exact problem, but none have worked for me. Anyone have any ideas?

This is what I posted to someone else having an update issue... Just for your information:
I having the same issue about the and iTunes says "The iPhone cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.". I've had the iPhone 3GS since it came out. It was working fine until I just tried to update it. It has NEVER been hacked or jailbroken. WE AND A FEW OTHERS are having the same issue then it is more than likely that this is an update issue. I took mine to the Apple store and the tech tried to update it and he came to the same problem and told me he couldn't update it. My assumption is that we are not the only one's with this issue and that if there was a way to update it to the update before this last one it might be a solution. I don't know how to get the previous update. Apple probably is aware of the problem, and hasn't come up with a solution yet. Or, enough people haven't complained yet. The tech suggested that there might be something wrong with the phone itself, but that couldn't be since it was working perfectly before I updated it and others are having the same issue. It is highly unlikely that a lot of people are having the same hardware issue all of a sudden at the same time. Apple/iTunes needs to fix this... and hopefully soon
Also: I can update or restore my iPhone 5 and other iPhones so it is not an issue with my firewall or other software on my computer. No one touches my iPhone or my computer they are secure, locked all the time, and I have no jailbreak software on my computer (Apple tried it and they are clueless at the moment from what I can tell).

Please can somebody help

well this is the situation i uninstalled my itunes, i just tryed to install it again, it goes on to the system but when i click on the itunes icon it comes up saying cannot open itues as file has been created by a newer version, ive tryed evrything and dont know what else to do,

You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera.
If you have failed to do this, then the pics are likely gone.
You can try restoring from the last backup of your iphone. If that fails, the they are gone.
Sorry.

HELP! iPhone 4S stuck in recovery mode after trying to udate

HELP! My iPhone 4S is stuck in recovery mode (the iTunes usb plug in screen) after trying to update ios 7.1.1? Wont come back to normal, someone please help! I have already turned off, restarted, tried wondershare dr phone's free trial and nothing is working. I dont want to restore and loss all of my data and am scared even that wont work.
I will be forever grateful for any help I can get to just bring my phone back to its pre-update state.
Thanks!
Christine

Unfortunately, if you are in Recovery Mode then all your data is already gone.
You need to connect to iTunes to restore iOS then restore from your latest iTunes or iCloud backup.
iOS: Back up and restore your iOS device with iCloud or iTunes

Please can anyone help me. Spinning wheel on any operation after Mavericks Install.

I would really appreciate anybody's help as I am desperate. Thank you in advance.
After 3 days I have finally got a system running again on my macbook pro mid 2012 but not a without major problem.
I am constantly getting the spinning colour wheel and i can hardly do anything. Booting up in safe mode is fine and I get no spinning wheel.
Briefly what has happened -
4 days ago I decided to make a clean install of mavericks as I wanted to clear the clutter from my hard drive and the fact i was getting a spinning colour wheel very ten minutes for around 10 seconds thus interrupting my work. The download and install kept failing toward the end of installation process. Through recovery mode and disk utility i wiped my hard rive to put on a fresh copy but that left me with no recovery, no OS and it has taken 3 days for me and some help from a guy in the apple community to finally get a system running.
Unfortunately my only internet connection (which i sci-fi) is at a cafe in the small village I live in and I have no access to another mac or internet connection and there is no genius bar or mac tech of any sort near by. So I went through the steps of 'internet recovery mode' which kept failing but after 2 days and hours in the cafe I managed to install mountain lion onto a usb stick. With this I was able to put mountain lion on my system. It seemed fine and I then went onto download mavericks. Every time the installation failed. It takes nearly four hours for it to even download. Last night through endless attempts using the createinstallmedia method i was able to wipe my usb that had mountain lion on and put mavericks installer onto it. So i was left with a usb stick with mavericks installer on it and mountain lion on my macbook pro.
Last night I kept trying to install mavericks via Disk Utility in recovery mode because trying to install it from the usb just wasn't working. after attempts here and there and no luck - In disk utility i saw on the left My apple hard drive and underneath the name of my personally named HD. Below that was a horizontal line and below was a yellow/orange hd with disk02 labelled next to it and one called base system. Below that my usb with install os x mavericks.
This morning, in the cafe I managed to get mavericks working via disk utility in recovery mode. The problem is when i click on finder in the dock, when i try open an app, click on the menu bar - I get the coloured spinning wheel which keeps going for at least two minutes. I fixed disk permissions, run verify disk and everything was fine, started in safe mode and everything is fine. I reset my pram, smc and still i have this spinning wheel when i try do anything . I have my phone with me and its been the only way i can go online to try solve any problem what so ever but as of this moment i have typed and no spinning wheel but if open another tab it will start. I managed to download ETRECHECK and have my results, I also looked at my console which I don't understand but obviously something is wrong. I will post below my results from etrecheck and console, if someone could advice me I would be very grateful.
etrecheck report -
EtreCheck version: 1.9.15 (52)
Report generated 10 September 2014 10:31:47 BST
Hardware Information: ?
MacBook Pro (15-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1440 x 900
NVIDIA GeForce GT 650M - VRAM: 512 MB
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:57:15
Disk Information: ?
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
OS X HD (disk0s2) / [Startup]: 499.25 GB (480.66 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
User Login Items: ?
None
Internet Plug-ins: ?
Default Browser: Version: 537 - SDK 10.9
QuickTime Plugin: Version: 7.7.3
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
None
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
      1% fontd
      1% Console
      0% WindowServer
      0% System Events
      0% imagent
Top Processes by Memory: ?
147 MB Safari
131 MB mds_stores
98 MB com.apple.WebKit.WebContent
98 MB com.apple.IconServicesAgent
82 MB Console
Virtual Memory Information: ?
11.87 GB Free RAM
2.35 GB Active RAM
580 MB Inactive RAM
1.20 GB Wired RAM
738 MB Page-ins
0 B Page-outs
-- my Console will follow after a restart and copy and paste.
Thank you for any help.
Gregg

and this is my log after a restart -
10/09/2014 10:42:07.872 sharingd[174]: Starting Up...
10/09/2014 10:42:07.978 revisiond[28]: objc[28]: Class GSLockToken is implemented in both /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Supp ort/revisiond and /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage. One of the two will be used. Which one is undefined.
10/09/2014 10:42:08.232 xpcproxy[202]: assertion failed: 13E28: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
10/09/2014 10:42:08.336 com.apple.IconServicesAgent[203]: IconServicesAgent launched.
10/09/2014 10:42:08.399 SystemUIServer[160]: Cannot find executable for CFBundle 0x7fba19525dd0 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
10/09/2014 10:42:08.590 accountsd[209]: assertion failed: 13E28: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
10/09/2014 10:42:08.600 com.apple.SecurityServer[15]: Session 100011 created
10/09/2014 10:42:08.640 WiFiKeychainProxy[184]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
10/09/2014 10:42:08.641 WiFiKeychainProxy[184]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
10/09/2014 10:42:08.644 SocialPushAgent[185]: ApplePushService: APSConnection being used without a delegate queue
10/09/2014 10:42:08.647 SystemUIServer[160]: Cannot find executable for CFBundle 0x7fba1b050d50 </System/Library/CoreServices/Menu Extras/Battery.menu> (not loaded)
10/09/2014 10:42:08.649 SystemUIServer[160]: Cannot find executable for CFBundle 0x7fba1b05d3d0 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
10/09/2014 10:42:08.727 com.apple.IconServicesAgent[203]: Error: Failed to add value to tree: Invalid node at index: 248.
1   IconServices                        0x000000010ee4e9f5 _ZN11SharedCache9_addValueEyR15SharedCacheItem + 391
2   IconServices                        0x000000010ee4e78c _ZN11SharedCache8addValueEyR15SharedCacheItem + 56
3   IconServices                        0x000000010ee52cb7 ___ZN18IconImageGenerator4mainEv_block_invoke7 + 940
4   libdispatch.dylib                   0x000000010df2028d _dispatch_client_callout + 8
5   libdispatch.dylib                   0x000000010df21146 _dispatch_barrier_sync_f_invoke + 39
6   IconServices                        0x000000010ee525ba _ZN18IconImageGenerator4mainEv + 734
7   IconServices                        0x000000010ee53ea8 _ZN11WorkManager11processWorkEP4Work + 112
8   IconServices                        0x000000010ee53e1f ___ZN11WorkManager11enqueueWorkEP4WorkU13block_pointerFvS1_E_block_invoke_5 + 26
9   libdispatch.dylib                   0x000000010df231bb _dispatch_call_block_and_release + 12
10 libdispatch.dylib                   0x000000010df2028d _dispatch_client_callout + 8
11 libdispatch.dylib                   0x000000010df247e3 _dispatch_async_redirect_invoke + 154
12 libdispatch.dylib                   0x000000010df2028d _dispatch_client_callout + 8
13 libdispatch.dylib                   0x000000010df22082 _dispatch_root_queue_drain + 326
14 libdispatch.dylib                   0x000000010df23177 _dispatch_worker_thread2 + 40
15 libsystem_pthread.dylib             0x000000010e215ef8 _pthread_wqthread + 314
16 libsystem_pthread.dylib             0x000000010e218fb9 start_wqthread + 13
10/09/2014 10:42:08.811 accountsd[209]: /SourceCache/Accounts/Accounts-336.9/ACDAuthenticationPluginManager.m - -[ACDAuthenticationPluginManager credentialForAccount:client:handler:] - 230 - The authentication plugin for account "[email protected]" (5F1FE0B1-54A5-4F0A-AB0E-F068ACC1C067) could not be found!
10/09/2014 10:42:08.812 accountsd[209]: /SourceCache/Accounts/Accounts-336.9/ACDAccountStore.m - __62-[ACDAccountStore credentialForAccountWithIdentifier:handler:]_block_invoke389 - 857 - No plugin provides credentials for account [email protected]. Falling back to legacy behavior.
10/09/2014 10:42:08.945 xpcproxy[216]: assertion failed: 13E28: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
10/09/2014 10:42:09.151 SystemUIServer[160]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
10/09/2014 10:42:09.151 SystemUIServer[160]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
10/09/2014 10:42:09.588 AirPlayUIAgent[219]: 2014-09-10 10:42:09.587638 AM [AirPlayUIAgent] Changed PIN pairing: no
10/09/2014 10:42:09.593 AirPlayUIAgent[219]: 2014-09-10 10:42:09.593451 AM [AirPlayUIAgent] Changed PIN pairing: no
10/09/2014 10:42:09.594 com.apple.IconServicesAgent[203]: main Failed to composit image for binding VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x107] - extension: lpdf, UTI: com.apple.localized-pdf-bundle, fileType: ????.
10/09/2014 10:42:09.594 apsd[60]: Unrecognized leaf certificate
10/09/2014 10:42:09.595 quicklookd[210]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: lpdf, UTI: com.apple.localized-pdf-bundle, fileType: ???? request size:128 scale: 1
10/09/2014 10:42:09.934 com.apple.time[152]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
10/09/2014 10:42:09.938 com.apple.time[152]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
10/09/2014 10:42:10.150 awacsd[58]: Exiting
10/09/2014 10:42:10.444 com.apple.dock.extra[204]: <NSXPCConnection: 0x7f954b7689f0>: received an undecodable message (no exported object to receive message). Dropping message.
10/09/2014 10:42:10.531 com.apple.SecurityServer[15]: Session 100013 created
10/09/2014 10:42:11.535 SocialPushAgent[185]: (null) - (null) - 0 - Request error: The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
10/09/2014 10:42:11.535 SocialPushAgent[185]: __110-[SPALinkedInService registerForPushNotificationsAndUpdatePersistFileWithDeviceToken:UUID:account:en abledFor:]_block_invoke_2 [92] -- *** POST of push registration FAILED. responseCode: 401. Error: Error Domain=NSURLErrorDomain Code=-1012 "The operation couldn’t be completed. (NSURLErrorDomain error -1012.)" UserInfo=0x7fc950433030 {NSErrorFailingURLStringKey=https://api.linkedin.com/v1/device-notifications, NSUnderlyingError=0x7fc950608700 "The operation couldn’t be completed. (kCFErrorDomainCFNetwork error -1012.)", NSErrorFailingURLKey=https://api.linkedin.com/v1/device-notifications}.
Response:<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<error>
<status>401</status>
<timestamp>1410342131391</timestamp>
<request-id>QBBS5TIFXF</request-id>
<error-code>0</error-code>
<message>[unauthorized]. Expired access token. Timestamp: 1407583881616</message>
</error>
10/09/2014 10:42:11.610 SocialPushAgent[185]: -[SPAService handleChangesToPushNotificationSettings] [111] -- *** unable to get the current device-token:(null) and/or the uuid:(null) (type = com.apple.social.linkedin)
10/09/2014 10:42:12.054 SocialPushAgent[185]: (null) - (null) - 0 - Request error: The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
10/09/2014 10:42:12.054 SocialPushAgent[185]: __110-[SPALinkedInService registerForPushNotificationsAndUpdatePersistFileWithDeviceToken:UUID:account:en abledFor:]_block_invoke_2 [92] -- *** POST of push registration FAILED. responseCode: 401. Error: Error Domain=NSURLErrorDomain Code=-1012 "The operation couldn’t be completed. (NSURLErrorDomain error -1012.)" UserInfo=0x7fc9507142f0 {NSErrorFailingURLStringKey=https://api.linkedin.com/v1/device-notifications, NSUnderlyingError=0x7fc950735b10 "The operation couldn’t be completed. (kCFErrorDomainCFNetwork error -1012.)", NSErrorFailingURLKey=https://api.linkedin.com/v1/device-notifications}.
Response:<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<error>
<status>401</status>
<timestamp>1410342131914</timestamp>
<request-id>VN23CP2E4Q</request-id>
<error-code>0</error-code>
<message>[unauthorized]. Expired access token. Timestamp: 1407583881616</message>
</error>
10/09/2014 10:42:12.329 gamed[207]: CKSoftwareMap: Registering with Daemon
10/09/2014 10:42:12.534 SocialPushAgent[185]: (null) - (null) - 0 - Request error: The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
10/09/2014 10:42:12.534 SocialPushAgent[185]: __110-[SPALinkedInService registerForPushNotificationsAndUpdatePersistFileWithDeviceToken:UUID:account:en abledFor:]_block_invoke_2 [92] -- *** POST of push registration FAILED. responseCode: 401. Error: Error Domain=NSURLErrorDomain Code=-1012 "The operation couldn’t be completed. (NSURLErrorDomain error -1012.)" UserInfo=0x7fc9506029f0 {NSErrorFailingURLStringKey=https://api.linkedin.com/v1/device-notifications, NSUnderlyingError=0x7fc950617910 "The operation couldn’t be completed. (kCFErrorDomainCFNetwork error -1012.)", NSErrorFailingURLKey=https://api.linkedin.com/v1/device-notifications}.
Response:<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<error>
<status>401</status>
<timestamp>1410342132396</timestamp>
<request-id>RMWDQI5C9G</request-id>
<error-code>0</error-code>
<message>[unauthorized]. Expired access token. Timestamp: 1407583881616</message>
</error>
10/09/2014 10:42:13.597 com.apple.NotesMigratorService[224]: Joined Aqua audit session
10/09/2014 10:42:13.716 com.apple.internetaccounts[216]: An instance 0x7fe6035ea790 of class IMAPMailbox was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x7fe6035ea8b0> (
<NSKeyValueObservance 0x7fe6035ea840: Observer: 0x7fe6035ea160, Key path: uidNext, Options: <New: NO, Old: NO, Prior: NO> Context: 0x11c4e343b, Property: 0x7fe6035e2f00>
10/09/2014 10:42:13.722 com.apple.internetaccounts[216]: An instance 0x7fe60375f7e0 of class IMAPMailbox was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x7fe60375fa00> (
<NSKeyValueObservance 0x7fe60375f890: Observer: 0x7fe60375edf0, Key path: uidNext, Options: <New: NO, Old: NO, Prior: NO> Context: 0x11c4e343b, Property: 0x7fe6035e2f00>
10/09/2014 10:42:15.876 com.apple.time[152]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
10/09/2014 10:42:18.822 parentalcontrolsd[233]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
10/09/2014 10:42:46.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x2800 ****
10/09/2014 10:43:52.000 kernel[0]: disk0s2: I/O error.
10/09/2014 10:43:53.648 ReportCrash[245]: Saved crash report for PluginProcess[242] version 9537 (9537.77.4) to /Users/gregghartley/Library/Logs/DiagnosticReports/PluginProcess_2014-09-10-104 353_Greggs-MacBook-Pro.crash
10/09/2014 10:43:59.461 Console[252]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
10/09/2014 10:44:21.017 com.apple.launchd[1]: (com.apple.WebKit.WebContent.BDB385CE-A81F-42DC-A2C0-22FB10393682[239]) Could not terminate job: 3: No such process
10/09/2014 10:44:21.017 com.apple.launchd[1]: (com.apple.WebKit.WebContent.BDB385CE-A81F-42DC-A2C0-22FB10393682[239]) Using fallback option to terminate job...
10/09/2014 10:44:21.023 com.apple.launchd[1]: (com.apple.WebKit.Networking.F8370421-D068-417A-A5F7-A1014B264202[238]) Exited with code: 1
10/09/2014 10:44:31.937 com.apple.launchd[1]: (com.apple.WebKit.WebContent.79A3EAE7-3B71-47A5-A430-F255F70590DD[240]) Exited with code: 1
10/09/2014 10:44:51.925 com.apple.launchd[1]: (com.apple.qtkitserver[254]) Exit timeout elapsed (20 seconds). Killing
10/09/2014 10:44:52.000 kernel[0]: disk0s2: I/O error.
10/09/2014 10:45:52.118 firmwaresyncd[46]: /sbin/fsck_msdos exited with 8
10/09/2014 10:45:52.118 firmwaresyncd[46]: Command /sbin/fsck_msdos output: ** /dev/disk0s1
** Phase 1 - Preparing FAT
** Phase 2 - Checking Directories
/EFI/APPLE/CACHES/CAFEBEEF starts with free cluster
Remove? no
** Phase 3 - Checking for Orphan Clusters
Found orphan cluster(s)
Fix? no
Found 5 orphaned clusters
Free space in FSInfo block (371723) not correct (371721)
Fix? no
10 files, 185860 KiB free (371721 clusters)

Please, Can someone help me figure out this **** power button? after TWO weeks mine is already broken.

THIS APPLE IPOD *****. It broke and I have a case for it and EVERYTHING. The power button just gave up on me.

Make an appointment at the Genius Bar of an Apple store. If not abused Apple will exchange it at no cost on the spot.
Apple Retail Store - Genius Bar
To send it to Apple
Apple - Support - iPod - Service FAQ

Iphone 4s stuck in recovery mode after downloading iOS 6

I installed iOS 6 on my PC(win 7) and connected my phone but when the download finished, it left my phone in the recovery mode or the screen with the USB and Itunes symbol. Ive tried almost 8 times to restore my phone but every time the same thing happens; it downloads the update but nothing changes on the phone. I've tried it on 3 computers and still no success, so my phone is just a paper weight as of right now. does anyone know things that could help? thanks

I was finally able to restore my phone and apply the backup, but my 4S is now basically an iTouch. I have no cellular network service and Verizon can't get it restored.
And since I'm on an enterprise plan, I have to wait until next week to get anything done with the phone.
I thought I was safe updating my iPhone...
But as the old adage goes... "Just say no to version .0"

Iphone 4 stuck in boot loop after failed ios5 restore/update

i'm sure this question has already been answered and i just can't find it. After attempting to update/ restore my iphone 4 gsm to ios 5 it recieved an odd error code something with =yes at the end. Now my phone just keep rebooting: apple screen, spining disk, loading bar like during a restore for 1 second then it repeats this process. Itunes will not reconized the device unless i force it into dfu or recovery mode. I have tried everything to get it to restore dfu, recovery, the previous firmware 4.3.5 and everything gives the error "this device isn't eligible for this build." any tips possible sulotion would be great as of right now i have a bricked iphone 4

I had a similar problem on mine with the same symptoms so I called apple since my PC couldn't even see my iPhone 4 when it was plugged in. The rep told me to hold the home button and on/off switch like when doing a hard resatart and hold those two buttons together for 10 seconds and once 10 seconds pass then release the on/off switch but continue holding the home button until the phone shows up again under "devices" in iTunes.

I have an unlocked 3GS and it is NOT jailbroken. It ran out of battery last night and when i charged it this morning it has got stuck on the apple logo wont do anything else. My computer doesnt pick it up either! Can somebody HELP please!!!

I have an unlocked 3GS and it is NOT jailbroken. It ran out of battery last night and when i charged it this morning it has got stuck on the apple logo wont do anything else. My computer doesnt pick it up either! Can somebody HELP please!!!
nb. i havent updated it for a while to its running a 3. something software.

Connect the iPhone to your computer and launch iTunes, then restart the iPhone by holding down the on/off and the home buttons until you see the Apple logo. If that don't fix you problem take a look at this link, http://support.apple.com/kb/HT1414

Please can somebody help- my iPhone is stuck in a loop after downloading IS6.1

Similar Messages

Maybe you are looking for