Please, can somebody read my console log and tell if this repeating message is an error?
My cursor has been moving erratically and I was told that it could be because of a software error. I was told to check my console log for errors but it all looks like hyroglyphics to me. Please, can somebody tell me if you see a probelm or error message?
7/26/13 2:11:03.052 PM Internet Claro[135]: *****rmccmnc:71610
7/26/13 2:11:03.439 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:03.447 PM Internet Claro[135]: mark : 0.003065, index : 1
7/26/13 2:11:03.939 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:04.008 PM Internet Claro[135]: mark : 0.003065, index : 2
7/26/13 2:11:04.439 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:04.440 PM Internet Claro[135]: mark : 0.003065, index : 3
7/26/13 2:11:04.939 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:04.951 PM Internet Claro[135]: mark : 0.003065, index : 0
7/26/13 2:11:05.450 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:05.451 PM Internet Claro[135]: mark : 0.003065, index : 1
7/26/13 2:11:05.948 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:05.963 PM Internet Claro[135]: mark : 0.003066, index : 2
7/26/13 2:11:06.450 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:06.451 PM Internet Claro[135]: mark : 0.003066, index : 3
7/26/13 2:11:06.950 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:06.988 PM Internet Claro[135]: mark : 0.003066, index : 0
7/26/13 2:11:07.439 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:07.439 PM Internet Claro[135]: mark : 0.003066, index : 1
7/26/13 2:11:07.940 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:07.953 PM Internet Claro[135]: mark : 0.003066, index : 2
7/26/13 2:11:08.439 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:08.440 PM Internet Claro[135]: mark : 0.003066, index : 3
7/26/13 2:11:08.939 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:08.940 PM Internet Claro[135]: mark : 0.003066, index : 0
7/26/13 2:11:09.439 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:09.440 PM Internet Claro[135]: mark : 0.003066, index : 1
7/26/13 2:11:09.962 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:09.975 PM Internet Claro[135]: mark : 0.003066, index : 2
7/26/13 2:11:10.439 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:10.439 PM Internet Claro[135]: mark : 0.003066, index : 3
7/26/13 2:11:10.939 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:10.939 PM Internet Claro[135]: mark : 0.003066, index : 0
7/26/13 2:11:11.439 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:11.440 PM Internet Claro[135]: mark : 0.003066, index : 1
7/26/13 2:11:11.939 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:11.940 PM Internet Claro[135]: mark : 0.003066, index : 2
7/26/13 2:11:12.445 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:12.449 PM Internet Claro[135]: [addCSQWithModuleId:]
7/26/13 2:11:12.460 PM Internet Claro[135]: mark : 0.003066, index : 3
7/26/13 2:11:12.460 PM Internet Claro[135]: addCSQWithModuleId:mQueue count = 0
7/26/13 2:11:12.460 PM Internet Claro[135]: [addZPASWithModuleId:]
7/26/13 2:11:12.461 PM Internet Claro[135]: addZPASWithModuleId:mQueue count = 1
7/26/13 2:11:12.461 PM Internet Claro[135]: [addZDONWithModuleId:]
7/26/13 2:11:12.461 PM Internet Claro[135]: addZDONWithModuleId:mQueue count = 2
7/26/13 2:11:12.552 PM Internet Claro[135]: [Put_Res_Q]:
+CSQ: 13,99
OK
7/26/13 2:11:12.751 PM Internet Claro[135]: [Put_Res_Q]:
+ZPAS: "HSPA","CS_PS"
OK
7/26/13 2:11:12.849 PM Internet Claro[135]: [ProcAtZpasRes:] network = HSPA,CS_PS
7/26/13 2:11:12.939 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:12.939 PM Internet Claro[135]: mark : 0.003066, index : 0
7/26/13 2:11:12.952 PM Internet Claro[135]: [Put_Res_Q]:
+ZDON: "Claro",716,10,"Claro",716,10,"ROAM_OFF"
OK
7/26/13 2:11:13.049 PM Internet Claro[135]: [ProcAtZdonRes:] RPLMN = Claro,RMCC= 716, RMNC=10,HPLMN=Claro,HMCC=716,HMNC=10,ROAM=ROAM_OFF
7/26/13 2:11:13.050 PM Internet Claro[135]: postSetProviderAndDomainStatus:ROAM_OFF
7/26/13 2:11:13.050 PM Internet Claro[135]: mcc = 1814
7/26/13 2:11:13.050 PM Internet Claro[135]: mnc = 16
7/26/13 2:11:13.051 PM Internet Claro[135]: *****rmccmnc:71610
7/26/13 2:11:13.439 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:13.440 PM Internet Claro[135]: mark : 0.003066, index : 1
7/26/13 2:11:13.939 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:13.984 PM Internet Claro[135]: mark : 0.003066, index : 2
7/26/13 2:11:14.439 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:14.439 PM Internet Claro[135]: mark : 0.003066, index : 3
7/26/13 2:11:14.939 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:14.974 PM Internet Claro[135]: mark : 0.003066, index : 0
7/26/13 2:11:15.439 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:15.439 PM Internet Claro[135]: mark : 0.003066, index : 1
7/26/13 2:11:15.939 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:15.953 PM Internet Claro[135]: mark : 0.003067, index : 2
7/26/13 2:11:16.452 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:16.452 PM Internet Claro[135]: mark : 0.003067, index : 3
7/26/13 2:11:16.950 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:16.984 PM Internet Claro[135]: mark : 0.003067, index : 0
7/26/13 2:11:17.451 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:17.452 PM Internet Claro[135]: mark : 0.003067, index : 1
7/26/13 2:11:17.939 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:17.939 PM Internet Claro[135]: mark : 0.003067, index : 2
7/26/13 2:11:18.439 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:18.440 PM Internet Claro[135]: mark : 0.003067, index : 3
7/26/13 2:11:18.939 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:18.953 PM Internet Claro[135]: mark : 0.003067, index : 0
7/26/13 2:11:19.439 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:19.440 PM Internet Claro[135]: mark : 0.003067, index : 1
7/26/13 2:11:19.939 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:20.006 PM Internet Claro[135]: mark : 0.003067, index : 2
7/26/13 2:11:20.438 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:20.439 PM Internet Claro[135]: mark : 0.003067, index : 3
7/26/13 2:11:20.941 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:20.968 PM Internet Claro[135]: mark : 0.003067, index : 0
7/26/13 2:11:21.439 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:21.440 PM Internet Claro[135]: mark : 0.003067, index : 1
7/26/13 2:11:21.938 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:21.969 PM Internet Claro[135]: mark : 0.003067, index : 2
7/26/13 2:11:22.438 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:22.439 PM Internet Claro[135]: mark : 0.003067, index : 3
7/26/13 2:11:22.448 PM Internet Claro[135]: [addCSQWithModuleId:]
7/26/13 2:11:22.449 PM Internet Claro[135]: addCSQWithModuleId:mQueue count = 0
7/26/13 2:11:22.449 PM Internet Claro[135]: [addZPASWithModuleId:]
7/26/13 2:11:22.449 PM Internet Claro[135]: addZPASWithModuleId:mQueue count = 1
7/26/13 2:11:22.450 PM Internet Claro[135]: [addZDONWithModuleId:]
7/26/13 2:11:22.451 PM Internet Claro[135]: addZDONWithModuleId:mQueue count = 2
7/26/13 2:11:22.560 PM Internet Claro[135]: [Put_Res_Q]:
+CSQ: 13,99
OK
7/26/13 2:11:22.751 PM Internet Claro[135]: [Put_Res_Q]:
+ZPAS: "HSPA","CS_PS"
OK
7/26/13 2:11:22.848 PM Internet Claro[135]: [ProcAtZpasRes:] network = HSPA,CS_PS
7/26/13 2:11:22.938 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:22.961 PM Internet Claro[135]: [Put_Res_Q]:
+ZDON: "Claro",716,10,"Claro",716,10,"ROAM_OFF"
OK
7/26/13 2:11:22.962 PM Internet Claro[135]: mark : 0.003067, index : 0
7/26/13 2:11:23.048 PM Internet Claro[135]: [ProcAtZdonRes:] RPLMN = Claro,RMCC= 716, RMNC=10,HPLMN=Claro,HMCC=716,HMNC=10,ROAM=ROAM_OFF
7/26/13 2:11:23.049 PM Internet Claro[135]: postSetProviderAndDomainStatus:ROAM_OFF
7/26/13 2:11:23.049 PM Internet Claro[135]: mcc = 1814
7/26/13 2:11:23.049 PM Internet Claro[135]: mnc = 16
7/26/13 2:11:23.050 PM Internet Claro[135]: *****rmccmnc:71610
7/26/13 2:11:23.438 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:23.446 PM Internet Claro[135]: mark : 0.003067, index : 1
7/26/13 2:11:23.938 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:23.939 PM Internet Claro[135]: mark : 0.003067, index : 2
7/26/13 2:11:24.438 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:24.442 PM Internet Claro[135]: mark : 0.003067, index : 3
7/26/13 2:11:24.938 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:24.939 PM Internet Claro[135]: mark : 0.003067, index : 0
7/26/13 2:11:25.438 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:25.439 PM Internet Claro[135]: mark : 0.003067, index : 1
7/26/13 2:11:25.938 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:25.939 PM Internet Claro[135]: mark : 0.003068, index : 2
7/26/13 2:11:26.448 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:26.453 PM Internet Claro[135]: mark : 0.003068, index : 3
7/26/13 2:11:26.938 PM Internet Claro[135]: animationView:drawRect
7/26/13 2:11:26.949 PM Internet Claro[135]: mark : 0.003068, index : 0
7/26/13 2:11:27.438 PM Internet Claro[135]: animationView:drawRect
If Claro is your internet service provider, then the notations in your log are not related to the cursor issue..
Try wiping the trackpad with a clean lint free damp cloth. Finger prints and smudges can cause erratic cursor behavior.
And check out this article > Portables and Magic Trackpad: Jumpy or erratic trackpad operation
Similar Messages
-
Can anyone read this Console log and tell me what is "librariand" ?
I've been having "librariand" showing up every 2-3 minutes in my log. can anyone read this Console log and tell me what is "librariand" and what's the problem behind this ?
11-08-14 9:53:37.009 AM librariand: new client - cancelling idle timeout
11-08-14 9:53:37.010 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:53:37.010 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:53:37.010 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:53:37.010 AM librariand: no clients - starting idle timer
11-08-14 9:53:37.011 AM librariand: new client - cancelling idle timeout
11-08-14 9:53:37.011 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:53:37.012 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:53:37.012 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:53:37.012 AM librariand: no clients - starting idle timer
11-08-14 9:53:37.013 AM librariand: new client - cancelling idle timeout
11-08-14 9:53:37.014 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:53:37.014 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:53:37.015 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:53:37.015 AM librariand: no clients - starting idle timer
11-08-14 9:53:37.015 AM librariand: new client - cancelling idle timeout
11-08-14 9:53:37.015 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:53:37.016 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:53:37.016 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:53:37.016 AM librariand: no clients - starting idle timer
11-08-14 9:53:37.017 AM librariand: new client - cancelling idle timeout
11-08-14 9:53:37.017 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:53:37.017 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:53:37.018 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:53:37.019 AM librariand: no clients - starting idle timer
11-08-14 9:56:39.802 AM librariand: new client - cancelling idle timeout
11-08-14 9:56:39.803 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:56:39.803 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:56:39.804 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:56:39.804 AM librariand: no clients - starting idle timer
11-08-14 9:57:11.575 AM librariand: new client - cancelling idle timeout
11-08-14 9:57:11.576 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:57:11.576 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:57:11.577 AM librariand: no ubiquity account configured, not creating collection
11-08-14 9:57:11.577 AM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 9:57:11.577 AM librariand: client connection is invalid: Connection invalid
11-08-14 9:57:11.577 AM librariand: no clients - starting idle timerI completely uninstalled the following:
Removed Evernote.app
Removed User/Library/Preferences/com.evernote.Evernote.plis
Removed User/Library/Applications Support/Evernote
and still get to see these logs when restart:
11-08-14 7:57:03.263 PM librariand: new client - cancelling idle timeout
11-08-14 7:57:03.263 PM librariand: no ubiquity account configured, not creating collection
11-08-14 7:57:03.263 PM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 7:57:03.264 PM helpd: unable to get sandbox extensions: The operation couldn’t be completed. (LibrarianErrorDomain error 10 - Unable to configure the collection.)
11-08-14 7:57:03.265 PM librariand: no ubiquity account configured, not creating collection
11-08-14 7:57:03.265 PM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
11-08-14 7:57:03.265 PM librariand: client connection is invalid: Connection invalid
11-08-14 7:57:03.265 PM librariand: no clients - starting idle timer
11-08-14 7:57:13.753 PM librariand: new client - cancelling idle timeout
11-08-14 7:57:13.767 PM librariand: no ubiquity account configured, not creating collection
11-08-14 7:57:13.767 PM librariand: error in handle_client_request: LibrarianErrorDomain/10/Unable to configure the collection.
any other solution ? -
Can I delete my Console Log and be safe ?
Here's the file path
" Macintosh HD/Library/Logs/Console/501/console.log.2 "
for some reason this file "console.log.2 " is 31.33 GB in size
Would it be safe to delete it ?
Thanks
Greg
Mac Pro Mac OS X (10.4.10)Hi Greg, that is huge! Yes, you can delete the log files. I'd leave the 501 Folder and console.log but delete the other contents. (Also be sure all that is in there are log files.)
-mj
[email protected] -
My Mac sometimes just goes out to lunch for short or medium periods of tiem and sometims fails to display my typed characters for a while dumping them on the screen a few second later - often missing some key strokes
I would love to get some help on this - willing to pay but have no idea where to go - maybe a service? maybe an Apple Genious? Maybe csomeone here?
entries like these seem to maybe be a clue if someone understands them
1/28/14 3:45:50.186 PM accountsd[1772]: assertion failed: 13B42: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
1/28/14 3:50:54.620 PM com.apple.IconServicesAgent[1782]: IconServicesAgent launched.
1/28/14 3:55:26.405 PM WindowServer[96]: disable_update_timeout: UI updates were forcibly disabled by application "Skype" for over 1.00 seconds. Server has re-enabled them.
1/28/14 3:55:26.474 PM WindowServer[96]: common_reenable_update: UI updates were finally reenabled by application "Skype" after 11.04 seconds (server forcibly re-enabled them after 10.97 seconds)
1/28/14 3:56:31.403 PM WindowServer[96]: disable_update_timeout: UI updates were forcibly disabled by application "Activity Monitor" for over 1.00 seconds. Server has re-enabled them.
1/28/14 3:56:31.430 PM WindowServer[96]: common_reenable_update: UI updates were finally reenabled by application "Activity Monitor" after 10.97 seconds (server forcibly re-enabled them after 10.95 seconds)
1/28/14 3:59:28.159 PM WindowServer[96]: disable_update_timeout: UI updates were forcibly disabled by application "PluginProcess" for over 1.00 seconds. Server has re-enabled them.
1/28/14 3:59:28.159 PM WindowServer[96]: common_reenable_update: UI updates were finally reenabled by application "PluginProcess" after 1.11 seconds (server forcibly re-enabled them after 1.11 seconds)
1/28/14 4:01:58.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1796[GoogleSoftwareUp] final status 0x0, allow (remove VALID)ing page
1/28/14 4:04:48.120 PM com.apple.backupd[1802]: Starting automatic backup
1/28/14 4:04:49.265 PM WindowServer[96]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
1/28/14 4:04:50.252 PM WindowServer[96]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.99 seconds (server forcibly re-enabled them after 1.00 seconds)
1/28/14 4:05:08.632 PM com.apple.backupd[1802]: Backing up to /dev/disk1s2: /Volumes/Laguna TM/Backups.backupdb
1/28/14 4:07:23.263 PM WindowServer[96]: disable_update_timeout: UI updates were forcibly disabled by application "Skype" for over 1.00 seconds. Server has re-enabled them.
1/28/14 4:07:27.747 PM WindowServer[96]: common_reenable_update: UI updates were finally reenabled by application "Skype" after 5.48 seconds (server forcibly re-enabled them after 1.00 seconds)
1/28/14 4:08:13.235 PM fseventsd[48]: client_buffer_flush: failed to send 32 events to client pid: 1802 (status: 268435460)
1/28/14 4:09:30.740 PM com.apple.backupd[1802]: Will copy (14.5 MB) from Macintosh HD
1/28/14 4:09:34.282 PM com.apple.backupd[1802]: Found 189 files (14.5 MB) needing backup
1/28/14 4:09:35.970 PM com.apple.backupd[1802]: 2.34 GB required (including padding), 120.28 GB available
1/28/14 4:09:53.599 PM SystemUIServer[229]: Timed out waiting for value of SOAccountInfoMessagesAccountState
LNupdated EterCheck report - new version
Hardware Information:
iMac (27-inch, Late 2009)
iMac - model: iMac10,1
1 3.33 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
ATI Radeon HD 4670 - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 4:34:35
Disk Information:
Hitachi HDS722020ALA330 disk0 : (2 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 2 TB (361.44 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information:
Hewlett-Packard HP LaserJet 200 color M251nw
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Logitech USB Receiver
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Other World Computing Oxford ATA Device 00 800mbit - 800mbit max
EFI (disk1s1) <not mounted>: 209.7 MB
Laguna TM (disk1s2) /Volumes/Laguna TM: 749.81 GB (119.66 GB free)
Thunderbolt Information:
Kernel Extensions:
com.silex.driver.sxuptp (1.5.1)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.bombich.ccc.plist 3rd-Party support link
[System] com.bombich.ccc.scheduledtask.74D1CCBE-45AB-4844-A903-AD3B05812360.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
[System] com.Affinegy.InstaLANa.plist 3rd-Party support link
[System] com.brother.LOGINserver.plist 3rd-Party support link
[System] com.epson.ecpd.launcher.plist 3rd-Party support link
[System] com.sony.PMBPortable.AutoRun.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.bombich.ccc-user-agent.plist 3rd-Party support link
[not loaded] com.ecamm.printopia.plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] ltcm.plist 3rd-Party support link
User Login Items:
Activity Monitor
Skype
TypeIt4Me
Belkin Router Monitor
Mail
Dropbox
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
WebEx64: Version: 1.0 - SDK 10.5 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Growl 3rd-Party support link
Printopia 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Users/[redacted]/Library/Application Support/WebEx Folder/1124
Meeting Center: Version: 12.27.23.0 - SDK 10.5 3rd-Party support link
asannotation2: Version: 10.21.23.0 - SDK 10.5 3rd-Party support link
convertpdf: Version: 1.2 - SDK 10.5 3rd-Party support link
Device Selector: Version: 1.5.5 - SDK 10.5 3rd-Party support link
/Library/Printers/Brother/Utilities/DeviceSelector/DeviceSelector.app
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
convertpdf: Version: 1.2 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/WebEx Folder/1124/convertpdf/convertpdf.app
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
WeatherSnoop: Version: 2.1.5 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/iWork '09
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
/Library/Printers/Brother/Utilities/Server
NETserver: Version: 1.1.6 - SDK 10.4 3rd-Party support link
USBserver: Version: 1.1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
/Library/Printers/EPSON/InkjetPrinter2/Utility/UT4
Epson Printer Utility 4: Version: 9.17 - SDK 10.5 3rd-Party support link
EpsonSuppliesTool4: Version: 8.61 - SDK 10.5 3rd-Party support link
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 2 Disk used: 1
Destinations:
Laguna TM [Local] (Last used)
Total size: 698.32 GB
Total number of backups: 48
Oldest backup: 2013-03-14 15:01:38 +0000
Last backup: 2014-01-29 23:32:47 +0000
Size of backup disk: Too small
Backup size 698.32 GB < (Disk used 1 X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
9% PluginProcess
3% WindowServer
1% backupd
1% EtreCheck
1% Finder
Top Processes by Memory:
680 MB Finder
133 MB com.apple.WebKit.WebContent
131 MB Mail
106 MB com.apple.IconServicesAgent
90 MB Safari
Virtual Memory Information:
51 MB Free RAM
3.18 GB Active RAM
3.22 GB Inactive RAM
826 MB Wired RAM
1.13 GB Page-ins
80 MB Page-outs -
To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?
Thanks for the reply.
But this library doesn't contain any sample .cfg and .dat files which can be read and understood. Can you please provide the same? -
My ipad became lag and always hanging Before it was not like that when i was in ios 6 but when im now in ios 7 its not lag , hanging and crashing please can somebody help
Try to reset the device:
*Device reset*
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally. -
i can't read in Mavericks DVDs and Bluray data burn with UDF system files burn with Snow Leopard, please help me. Thanks
They are DVDs with video files from a little more than 2 GB per file, were burned in Snow Leopard, with UDF file system, now that I updated to Mavericks when I try to read disks displays the directory in the finder a moment and then disappear and does not display them show them more. It is impossible to read the discs, but only those who were burned with UDF file system. Thank you for your help.
-
please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing ' ' 1274181950 464843899 1233118628 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Hi there everybody,
My new Iphone 5 uploaded doubleded all the songs from my library! Please, can somebody help me showing how can I delete just the songs that was doubled?
Some help will be greatly appreciate.
Thanks much!When you say "account," do you mean your iTunes library, because your iTunes library is what is on your computer? Your iTunes library does not have an email address. An account that is related to iTunes is your Apple ID (which is an email address) and you use it as your user name to sign in to the iTunes Store, to make purchases. Changing your Apple ID will not make songs disappear from your computer's iTunes library.
If you had an Apple ID and used it to make song purchases from the iTunes Store, and then started using a different Apple ID, you should be able to re-download the songs purchased with the old Apple ID. In iTunes, sign in to the iTunes Store using your OLD Apple ID (and password). That may not be your current email address, but Apple uses it as your user name, so it does not matter.
On the iTunes Store Home screen, click on Purchased under QUICK LINKS. This takes you do the Purchased screen, where you can re-download previous song purchases (for that Apple ID) at no cost.
NOTE: If those song purchases are from more than a few years ago, you may also need to authorize your computer to play (and sync) songs for your old Apple ID.
For songs that were not purchased from the iTunes Store, if they are also gone, you cannot get them back unless you have a backup (or they are still loaded on your old iPod).
If that's not what you mean by "changed the email address on my account," please post back with more details. -
Please can somebody help me? My imessage does not work, I try to activate it but it says an error ocurred during activation. try again
Its possible that the server can be down now. Have you ever used it before? If you want, try resseting the phone by just holding the sleep/wake key and the home button together for 10 seconds. Then wait 5 seconds when it turns off and press the sleep/wake button to turn it back on. Then try it again. Let me know what the results are.
-
How can i stop loosing all my videos, music, pics etc after an IOS update? PLEASE can somebody help me as i've lost everthing the last time i proceeded with this update so this time my mam thought she was doing the right thing by updating my phone!! :C
everything should be on your computer.
If you do as you should and make sure that everything is on your computer, then you should lose nothing. -
Please can somebody tell which network this iPhone 5 is locked to?
Serial Number: C38JHVP6F39C
Part Description: IPHONE 5 64GB BLACK
Product Version: 6.1.4
Coverage Status: Apple Limited Warranty
Coverage End Date: 29/10/13
First Unbrick Date: 30/10/12
Last Unbrick Date: 04/07/13
Next Tether Activation Policy Description: UK O2 Tesco.
Lock Status: Locked
Please can somebody tell me which network this iPhone 5 is locked to?Call AppleCare and ask them. No one but Apple has access to that information.
-
Contacts are there, but can't read anything in it, and can't write either.
Hello,
Contacts are there, but i can't read anything in it, and can't write either.
The place where i should read Name, Family Name, mail adress, phone, etc is EMPTY ! All white ! The card got hos name, but there is nothing in.
I started to use my mac book and adress book too.
I use mac os X since the beginnning, and i never had this problem with it.
Can someone help me please !
ThanksSounds like the Font Cache has a corrupt font in it.
Try this:
http://www.ehow.com/how_7197467_rebuild-font-cache.html
If that one doesn't work, it could be the WPF font cache
http://support.microsoft.com/kb/937135
You'll have to delete the .dat files in C:\Windows\ServiceProfiles\LocalService\AppData\Local and restart the computer. -
My laptop can't read any cd/dvd and problem with LHS shift key
My laptop (HP Pavilion dv6-2005tx Entertainment Notebook PC) can't read any cd/dvd's when i put them in the drive and also my LHS shift key does not work while pressing it for writing/using capital letters. please help me at the earliest.
Quote from: eftos
In control panel the Primary Ide chanel (the hard-disk) is working in UDMA mode 6, and the secondary Ide chanel (the DVDRW) is working in UDMA mode 4.
When i want to burn any CD or DVD with Nero, Roxio or anything else, i have this nice message :
DMA driver error. CRC error. Burn failled.
Solved !
I change the IDE cable with one of 80 wires.
This is MAGIC !!!
The 80-conductor cable was first defined with the original Ultra DMA modes 0, 1 and 2, covering transfer speeds up to 33.3 MB/s.
The cable is considered "optional" for those modes.
However, for any Ultra DMA modes above mode 2, the 80-conductor cable is mandatory.
cheers -
I have the latest downloadable version of LR5. It crashed while it was createing 1:1 previews during an import. After a Win7(64) restart, it shows a message that LR needs to quit because it can't read the preview files and it will try to fix it the next time is launches. I get the same message the next and every subsequent time it launches so I can't launch LR at all now.
I get that the preview file got corrupted somehow. Is there some way to fix this problem without building a new catalog?Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You need to delete that folder and then start Lightroom again. Lightroom will generate a new previews folder.
Maybe you are looking for
-
Calling web service from oracle forms fails with ORA_JAVA.JAVA_ERROR
Problem Description: I'm following the steps as per the doc: http://www.oracle.com/technology/products/forms/htdocs/10gr2/howto/webservicefromforms/ws_10_1_3_from_forms.html to create a java stub to call external web service and then use java importe
-
New router (switched from Linksys to Netgear 750 - HP J4680 printer all in one - and MAC
My husband puchase a new router - (we were told our old router failed on us) - we had no problems setting up the netgear 750 from the linksys router we originally had - we have a MACBook Pro My HP printer J4680 - ran beautifully before the router sw
-
Apple Mobile Device Missing Help Me Please
I have and iPod touch 2ndGen, I purchased it end of Decemeber last year. I have recently bought a dell laptop windows vista. And I installed iTunes but when I connect my iPod touch to my laptop I cant sync songs. It registors in MyComputer but wont r
-
This is an HP Photosmart Plus B210A printer. I have almost-new print cartridges installed (correctly). I have done a print quality test and the test page seems to be very good. The paper I'm using is high-quality photo print paper. I'm using quality
-
i am trying to install oracle linux through USB ..in partition management it is getting "what partition and directory on that partition hold the cd (iso9660) images for oracle linux" with options /dev/sda /dev/sda5 /dev/sbd what i have to do please