Please can someone help, my iMac will not load up
HI,
Please could someone help me? Whenever I turn my iMac on I keep getting this strange message (please see attached pics) when it is on the screen with the Apple.
i Don't what is causing this. I need to get back onto my Mac as there a lot of important files that I cannot afford to lose.
I've got an Intel IMac. The only bit of background info I can give you on what I recently did on it are is -
- I recently upgraded to Yosemite
- I recently purchased a game from GOG.com. I did this before I upgraded to Yosemite.
I would be VERY greatful if someone could help me out.
Thanks in advance, Mart.
Your machine appears to have had a hardware failure, please take it in for service at your local Apple Store or Apple Authorized Service Provider (AASP).
Similar Messages
-
please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing ' ' 1274181950 464843899 1233118628 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Please can someone help me n73 do not understand l...
I am a new person to mobiles can anyone tell me how to get contacts folder back so that i can add my phone numbers to it
cazie20-Oct-200711:33 AM
cazie wrote:
I am a new person to mobiles can anyone tell me how to get contacts folder back so that i can add my phone numbers to it
cazie
How did your contact get lost? Normally, if you never did any backup on memory card nor PC, it would not be possible to get it back. Sorry about that. It would not be possible to view your contact folder in phone by any means. It is hidden for security reason.
C6-00 with 8GB MicroSD -
everytime i try and open firefox it crashes i click to restart it and send report but its the same thing over and over nuthin changes, i used firefox up till like week ago now it will open period.
Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
TS4268 My iphone will not send imessage for normal messages. please can someone help?
My iphone will not send imessage for normal messages. please can someone help?
Hi maccaman82,
If you are having issues sending messages from your iPhone, you may find the following article helpful:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
- Brenden -
Please help, my iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen. Has anyone any ideas.
Locate your original install disk (it's grey) and use it to restart your iMac by holding the "C" key during startup. Use the disk utility to repair your harddrive.
-
Trying to re-install iTunes and the message "Apple mobile device failed to start. Verify that you have sufficient privileges to start system services." But I don't know what to do? Please can someone help, I'm not the most technologically advanced person.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
Thanks in advance.
EtreCheck version: 1.9.15 (52)
Report generated 19 September 2014 08:07:14 GMT+8
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
[loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.sophos.uiserver.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.music.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items: ?
iTunesHelper
TomTomHOMERunner
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
EPPEX Plugin: Version: 10.0 Support
Default Browser: Version: 537 - SDK 10.9
OVSHelper: Version: 1.1 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions: ?
Ultimate
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Perian Support
Trusteer Endpoint Protection Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 99
Oldest backup: 2012-04-20 17:05:32 +0000
Last backup: 2014-09-18 23:49:25 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
6% InterCheck
5% iCalExternalSync
3% WindowServer
2% CalendarAgent
2% SystemUIServer
Top Processes by Memory: ?
152 MB SophosScanD
147 MB InterCheck
106 MB SophosAntiVirus
66 MB Dropbox
57 MB com.apple.iTunesLibraryService
Virtual Memory Information: ?
161 MB Free RAM
1.55 GB Active RAM
1.41 GB Inactive RAM
902 MB Wired RAM
611 MB Page-ins
0 B Page-outsUninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437 -
my apple ID is showing someone elses email address and not mine so when i want to buy or update apps it brings this other email address up. please can someone help how do i put it back to my email address?
First go here - https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and login under the manage tab. Check your information and be sure it is all correct.
An AppleID is nothing more than an email address, so if you see another email address in the store, then someone has logged in with a different AppleID than yours. Did you let someone else use your iPhone? -
please can someone help me to unistall itunes from my laptop control panel, this means it also wont let me install the latest version!
I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul -
I cannot open Keynote? apparently there is error -600 occuring. Please can someone help?
I cannot open Keynote as I usually would. Apparently there is a error -600 ocurring. Please can someone help? Thank you..
Contact the BT Care Team. They are the moderators who oversee this forum and will be able to look into this for you. They may take a few days to respond but you will get an immediate online acknowledgement with a reference number to note in case you need to follow up.
You can click the white star next to this message if you think it was helpful. -
SQL : Please can someone help ?
Guys,
Please can someone help me ? I've written the following query and struggling to get the correct
outer join. In the first query, i look for all daily transactions of users registered under
hill.com but it's not giving me a record for an game at 4:24 because there are 0 players from hill.com
I need that to be displayed as 0 instead of skipping the entire row..
In the second query, when i comment out the registration_site, that gives me the missing game. How do
i use the outerjoin in this case ?
select
TO_CHAR(e.DRAW_DATE, 'Day') ,
TO_DATE(e.DRAW_DATE, 'DD/MM/RRRR') ,
TO_CHAR(e.DRAW_DATE, 'HH24:MI:SS') ,
to_char(f.card_price/100,'999999.99') ,
to_char(f.prize_initialamount/100,'999999.99') ,
to_char(e.total_prize/100,'999999.99') ,
case when e.total_amount_bet >= e.total_prize then 'Y' else 'N' end ,
to_char(e.player_count,'999999') ||','||
to_char((e.total_amount_bet/100)/(f.card_price/100),'999999') ,
to_char(count(distinct(b.user_id)),'999999') ,
to_char(sum(d.total_bet_amount),'999999.99')
FROM
production.gl_user_registrations a,
production.gl_user_game_sessions b,
production.vf_game_parameters c,
production.gl_user_game_play_summarys d,
production.VF_BINGO_DRAW_HISTORY e,
production.VF_BINGO_SCHEDULES f
WHERE
d.game_configuration_id = c.parameters_id
AND b.user_game_session_id = d.user_game_session_id
AND b.user_id = a.user_id
AND (a.user_privilege = 'USER' or a.user_privilege = 'CHAT-RESTRICTED-USER')
AND d.user_game_state <> 'INPROGRESS'
AND c.for_money = '1'
AND registration_site<>'CWC'
AND game_type='Bingo'
AND d.GAME_PLAY_ID=e.GAME_PLAY_ID
AND trunc(e.draw_date) = trunc(sysdate-1)
AND registration_Site in ('hill.com')
AND f.DRAW_TIME(+) = to_char(e.DRAW_DATE, 'hh24:mi:ss')
AND f.week_day(+) = mod(to_char(e.DRAW_DATE,'d'),7)+1
GROUP BY
f.card_price/100,
f.prize_initialamount / 100 ,
TO_CHAR(e.DRAW_DATE, 'Day') ,
TO_DATE(e.DRAW_DATE, 'DD/MM/RRRR') ,
TO_CHAR(e.DRAW_DATE, 'HH24:MI:SS') ,
e.player_count,
e.total_amount_bet/100 ,
e.total_prize/100 ,
(e.total_amount_bet - e.total_prize)/100 ,
case when e.total_amount_bet >= e.total_prize then 'Y' else 'N' end,
DECODE(SUBSTR(((e.total_amount_bet - e.total_prize)/100),1,1),'-', 'N', 'Y')
order by TO_DATE(e.DRAW_DATE, 'DD/MM/RRRR'), TO_CHAR(e.DRAW_DATE, 'HH24:MI:SS')
Thursday 08-FEB-07 04:12:00 .25 5.00 29.93 Y 39, 164 6 14.25
Thursday 08-FEB-07 04:18:00 .10 5.00 29.93 Y 37, 410 8 14.40
Thursday 08-FEB-07 04:30:00 .50 5.00 34.31 Y 34, 94 3 22.50
Thursday 08-FEB-07 04:36:00 .10 5.00 24.46 Y 38, 335 7 12.70
select
TO_CHAR(e.DRAW_DATE, 'Day') ,
TO_DATE(e.DRAW_DATE, 'DD/MM/RRRR') ,
TO_CHAR(e.DRAW_DATE, 'HH24:MI:SS') ,
to_char(f.card_price/100,'999999.99') ,
to_char(f.prize_initialamount/100,'999999.99') ,
to_char(e.total_prize/100,'999999.99') ,
case when e.total_amount_bet >= e.total_prize then 'Y' else 'N' end ,
to_char(e.player_count,'999999') ||','||
to_char((e.total_amount_bet/100)/(f.card_price/100),'999999') ,
to_char(count(distinct(b.user_id)),'999999') ,
to_char(sum(d.total_bet_amount),'999999.99')
FROM
production.gl_user_registrations a,
production.gl_user_game_sessions b,
production.vf_game_parameters c,
production.gl_user_game_play_summarys d,
production.VF_BINGO_DRAW_HISTORY e,
production.VF_BINGO_SCHEDULES f
WHERE
d.game_configuration_id = c.parameters_id
AND b.user_game_session_id = d.user_game_session_id
AND b.user_id = a.user_id
AND (a.user_privilege = 'USER' or a.user_privilege = 'CHAT-RESTRICTED-USER')
AND d.user_game_state <> 'INPROGRESS'
AND c.for_money = '1'
AND registration_site<>'CWC'
AND game_type='Bingo'
AND d.GAME_PLAY_ID=e.GAME_PLAY_ID
AND trunc(e.draw_date) = trunc(sysdate-1)
--AND registration_Site in ('williamhill.com')
AND f.DRAW_TIME(+) = to_char(e.DRAW_DATE, 'hh24:mi:ss')
AND f.week_day(+) = mod(to_char(e.DRAW_DATE,'d'),7)+1
GROUP BY
f.card_price/100,
f.prize_initialamount / 100 ,
TO_CHAR(e.DRAW_DATE, 'Day') ,
TO_DATE(e.DRAW_DATE, 'DD/MM/RRRR') ,
TO_CHAR(e.DRAW_DATE, 'HH24:MI:SS') ,
e.player_count,
e.total_amount_bet/100 ,
e.total_prize/100 ,
(e.total_amount_bet - e.total_prize)/100 ,
case when e.total_amount_bet >= e.total_prize then 'Y' else 'N' end,
DECODE(SUBSTR(((e.total_amount_bet - e.total_prize)/100),1,1),'-', 'N', 'Y')
order by TO_DATE(e.DRAW_DATE, 'DD/MM/RRRR'), TO_CHAR(e.DRAW_DATE, 'HH24:MI:SS')
Thursday 08-FEB-07 04:12:00 .25 5.00 29.93 Y 39, 164 22 41.00
Thursday 08-FEB-07 04:18:00 .10 5.00 29.93 Y 37, 410 27 41.00
Thursday 08-FEB-07 04:24:00 .25 5.00 17.16 Y 35, 94 13 23.50
Thursday 08-FEB-07 04:30:00 .50 5.00 34.31 Y 34, 94 14 47.00which table contains game_type column???
It will be better to prefix all the columns with table aliases. -
I was working with iPhoto downloading pictures and it quit unexpectedly and i lost a bunch of pictures what do i do can they be recovered some where on my computer?? Please can someone help it took me 12 hours just today not counting yesterday between scanning & transferring with a flash drive then dating old family slides in my iphoto. I lost alot
I was working with iPhoto downloading pictures
Do you mean importing photos? If so what were you importing from? If it is a flash drive why not just re-import from it? Where did you scan them?
As to backups - you really need to always have your backup running - without good backups you will lose all photos sooner or later
LN -
I want completely out of iCloud. Please, can someone help!
After putting it off for months I finally uprgraded to Lion and switched from Mobile Me to iCloud. Ugh!! I have been here all day just trying to get my Mac Mail right. I don't have any devices so I don't really need my stuff 'up in the cloud' anyway. I have been trying to find out how to completely close out (NOT turn off) any connection with iCloud at this point. I've been to help. I've been everywhere. It seems like you can only turn it off or delete it from your devices.
Please, can someone help me?!... isn't that just ''signing out'? I don't want my mail being 'stored' somewhere.
I understand that concern, and the answer is yes. Everything stored on Apple's servers will remain stored until you specifically delete it.
In that case, simply delete any and all email messages, contacts, etc before signing out. Empty the trash if that is applicable.
In Mail, the default account settings are as follows:
If yours are like that, your deleted messages are permanently deleted after a month, but "sent" messages stay on the server forever. You can change those settings to "immediately" if that is your preference.
As I say I undertand your concerns, just bear in mind Google Mail works exactly the same way. Even worse, some might say.
No matter what email service you use, as far as I know there is no way to be absolutely certain that copies of your emails aren't stored forever, somewhere, perhaps completely beyond your reach. In fact, US law requires it for company email... and I'm not completely certain that law does not apply to iCloud, Gmail, or even individuals.
http://apps.americanbar.org/lpm/lpt/articles/tch08061.shtml
I have heard good legal arguments to the effect that the moment you send an email, it ceases to become your "property" so any subsequent attempt to eradicate it may be futile anyway.
Sorry to go off on a tangent, but the bottom line is that permanently deleting email is more difficult than one would think, iCloud or not. -
I cant install or uninstall my itunes. I get this error 'the feature you are trying to use is on a network resource that is unavilable' Now ive seen the solutions on here but im using windows 8.1 and none of them work for me. Ive tried all options so please can someone help?
That doesnt work for me. I removed itunes through the windows cleaner method as shown in other posts and re-installed itunes. Now im getting this error
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 126)
Also my Microsoft office has stopped working after i deleted Itunes which is really strange.
Can somebody provide me a solution please....
Maybe you are looking for
-
[Solved]Installing Jedi Knight Dark Forces II w/o optical drive
This guide assumes that you already have access to the Jedi Knight Dark Forces II disc isos. If you don't and you want help making them then... send me an email... I guess, and I'll explain how to make them. (I may edit this post later with the det
-
System error 86 while mapping c$
Hi, thanks for your time. I'm having the next issue: I work on a domain network. Usually, we image computers and then join them to a domain. However, i find it impossible to do anything to an unjoined computer because i get system error 86. Im trying
-
I decided to create a website to showcase some of my graphic design work and I have been stumped for over three weeks of how to insert a flash web gallery. I bought this gallery from Entheosweb awhile ago and have been trying to correspond with their
-
Question on repairing permissions
I have a current problem where every time I restart my MBP (2.6ghz, early 08) the desktop picture goes to a picture I used a few months back. I tried deleting a couple of the preference panes that relate to desktop to no avail. I ended up moving that
-
Third party Sales order related issue
Hi, We are facing a strange issue Once a sales order is entered, purchase req is created, the buyer then creates the purchase order. Once the PO is generated, the req is deleted. This in turns creates an incomplete order and the buyer cannot PGI