Please can someone tell me hoe to put macintosh HD on my MacBook Air. I accidentally deleted it from the entire laptop. It was running lion. Now I can't start anything. I've tried using internet recovery but the system tells me that a problem occurred
I lost my macintosh HD by mistake. I tried internet recovery but it will not let me reinstall lion . Please help
The RAM needs specs as shown below.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
Similar Messages
-
I have iTunes installed on a laptop that I use for work, but it's owned by my employer. A new policy my have them deleting iTunes from the machine. If that happens, will I lose all my music? I am an iCloud user and pay for iTunes match.
If they just delete iTunes, the music files should still be there. I suggest making a backup of them though. Locate your iTunes folder (The one that contains your library file) and just copy the whole thing to your Documents folder or wherever you like (Just not in the same directory of the original folder otherwise the computer will get confused and could confuse your iTunes library). Then you will have a backup of all your music, plus if you purchased it from iTunes, you will still have it linked to your Apple ID so you can re-download them to any computer with iTunes on it when you feel like it.
-
Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?
Thanks!Dear Linc,
Thank you for the advice, John Blanchard1 and Linc Davis
As suggested in your reference thread I removed "/Library/Printers/hp/PDEs/hpPostScriptPDE.plugin" and the problem has been resolved.
I am guessing the the plug-in for the hp printers got corrupted and effected every thing, or became unsuitable when I installed an Apple update. I would be most grateful if you can confirm how the problem was coursed so I can understand and learn from this experiance.
Ash -
hello everyone i want to know if i download osx mountain lion on my macbook air paying it s price from the apple store can i download it on my iMac without paying it s price another time since I would ve paid it the first
yes, once paid for, you can download it for free on any other mac you own.
-
After downloading photos from my Nikon, I accidentally deleted them from the card. The photos are in IPhoto. Can I recover them to the camera card?
Probably -will your card mount to the desktop? If not you will need a card reader - select the photo(s) in iPhoto and export to a desktop folder - mount the card to the desktop and drag the photos to the corredct folder on it
LN -
My Macbook Air will not play music from the speakers
My Macbook Air will not play music from the speakers and the institutions says that it can only play sound out of earphones.
Is your account authorised on your Mac's iTunes ? If not then you can authorise it via the Store > Authorise This Computer menu option.
If you are being repeatedly asked to authorise the account : iTunes repeatedly prompts to authorize computer to play iTunes Store purchases - Apple Support -
How do I recover a background after accidentally deleting it from the background catalog
How do I recover a background after accidentally deleting it from the background catalog
Close Photoshop Elements Editor and Organizer.
Navigate to:
//Library/Application Support/Adobe/Photoshop Elements/11.0/Locale/en_US/
Delete the file Mediadatabase.db3.
Re-launch Photoshop Elements Editor. A progress bar appears as the media database is re-created. Wait for this process to complete. It make take some time and the screen may periodically go blank; so go away and get yourself a coffee and be patient.
N.B. If you have any of your own custom effects, you may need to re-create/re-install them.
-
Can't Upload Large Files (Upload Fails using Internet Explorer but works with Google Chrome)
I've been experience an issue uploading large (75MB & greater) PDF files to a SharePoint 2010 document library. Using normal upload procedures using Internet Explorer 7 (our company standard for the time being) the upload fails. No error message is thrown,
the upload screen goes away and the page refreshes and the document isn't there. I tried upload multiple and it says throws a failed error after a while.
Using google chrome I made an attempt just to see what it did and the file using the "Add a document" uploaded in seconds. Can't figure out why one browser worked and the other doesn't. We are getting sporadic inquiries with the same issue.
We have previously setup large file support in the appropriate areas and large files are uploaded to the sites successfully. Any thoughts?File size upload has to be configured on the server farm level. Your administrator most likely set
up the limit to size of files that can be uploaded. This size can be increased and you would then be able to upload your documents. -
1,1 running Lion with XP Boot (re-install and what should i use for recovery disk or usb stick)?
i am trying to give my 1,1 mac pro a little love and would like to keep this machine running lion. i also have a boot camp installation of XP on it.
1. can anyone give me instructions on how/whether i can basically do a fresh install of Lion on this machine and minimize the system so it is not cluttered up with all my previous software etc, etc while still maintaining the original XP boot camp partition which i really need to have?
2. can anyone clarify for me what i should have on hand /if/ i need to boot into recovery mode or some other safe boot mode? i recently ran into an issue where i may have had to use the old Disk Utility format function and there was a reference to booting using the DVD install disks. however i am really confused as to what i should have on hand. ALSO the last time i had to do something on this machine i was told to boot into the Recovery Partition and it appears for some reason (perhaps because i had a "non-standard" windows 7 boot camp installation on the drive at the time??) that there was no recovery partition created when i upgraded to Lion.
- /anyway/ i am finding that i have the two ORIGINAL install disks for the mac pro on hand, a Max OS X Leopard and a mac OS X Snow Leopard DVD on hand but i am thinking that i should be creating some kind of USB stick similar to the one i created with yosemite? actually, i am not even sure what this USB stick for yosemite is for but i guess i can use it to boot into safe mode or something?
THANKS for any help as i'd like to get this business under control a little better in case i have an issue.
i'd also like to install Lion so that there is a Recovery Partition if possible and i think this may be possible if i don't have the windows 7 partition in the machine when i do a fresh install. any help would be great. thanks.You have to go out of your way to build the Installer Disk yourself. But this tool makes it easy, and this site contains instructions:
http://diskmakerx.com
the bootable installer is basically to re-install the OS if i have to
Yes.
the recovery partition is somehow for fixing a problem
Recovery can go and get you the software and re-download it and start the Install, and allows the use of Disk Utility and can reset passwords.
or is there some overlap?
Yes. Both give you access to the Utilities that used to be on the Installer DVD. Disk Utility to Repair or initialize and a few other tools that can allow you to set up to install on an otherwise-bare disk or change your password.
is "Safe Mode" something completely different
Safe Mode is a way to start the fully-Installed Operating System in a special way. It first does one pass of Disk Utility (Repair Disk) against the Boot Drive. [Normally this would require booting from a different drive to make repairs.] Then it loads a minimal set of Apple-only kernel extensions, and uses a one-size-fits-all screen resolution. Then it demands your Username and password to proceed.
From there you can fix settings, use the Finder to add or delete things, and check operation with minimal extensions versus all your daily-use extensions. Very helpful for debugging extension conflicts and graphics settings problems, and fixing damaged settings. The next Restart builds a new extensions cache. -
If you have iPhoto 11 then check the System Trash.
Any other version check out a file recovery utility such as File Salvage
Unless you have a back up, of course. -
How do you delete MobileMe from the system
How can I delete MobileMe from my macbook OS X 10.6.8, it has a popup coming in every 10mins or so saying wrong username & password, there is still an icon in the system preferences which I cannot delete & check boxes for the program in iCal & mail. I have tried system/library/preferencepanes as suggested in other threads on this topic but the folder is already empty. Please help me before I go crazy!
Thanks I did that, but everytime I try to open a new mail account I see esomthing that brings up ICloud.
-
I purchased my MacBook Air at the beginning of August while I was in the US. I have now taken it home and have a little problem. I was listening and downloading music from YouTube while there and didn't have any problem, but now I am unable to listen to the music bacause there is a announcement saying that my system cannot support the video. What happened? Anne
1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now? -
I use OSX Maverics. On my macbook air OSX 10.9.4. On the left side (groups), I have accidentally deleted the Directories group. Now I am unable to sync contacts with gmail. What should I do?
Add them back in Contacts/Preferences/Accounts. Use the + sign at the bottom.
-
How do I delete contacts from the "to" suggested list that are not in my regular contacts?
How do I delete a contact from the quick look up in the "to" box that is not in my Contacts folder?
AFAIK - you cannot eliminate those contacts with the built in mail app on the iPad. There has never been a way to remove them that I have found in the 13 months that I have owned an iPad. You just have to ignore them.
If you would like to make a suggestion to Apple about adding that feature in a future update, you can do so here.
http://www.apple.com/feedback/ipad.html -
Is there a way to add/delete words from the predictive text ?
Is there a way to add/delete words from the predictive text options that my iPhone is giving me? I'm using an iPhone 6 Plus with iOS 8.
There are specific words that are popping up in the area right above the keyboard where it displays 3 word suggestions to choose from. This area seems to suggest words that I have typed before, I'd like to remove these words. Default seems to select the word in the center and when I'm typing fast on occasion it will recommend and select words that I don't need to use.
Any help would be appreciated.999753 wrote:
I know in 10g delete is added but in 9i i can only work with UPSERT( update, insert)
is there a way to add delete into 9i MERGE? or somehow encapsulate it?
Thank youI would suggest upgrading to a supported version of the database. 9i has been unsupported for many many years now.
And to answer your question... to the best of my knowledge, there is no workaround. It works as it works.
Maybe you are looking for
-
hi friends i am trying to set peoples or groups field in sharepoint list form with current user login name here my code <script src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.9.0.js"></script> <script type="text/javascript"> $(document).ready(f
-
Hi There, I can't save my file with this output method. but it works for other programs. Why is that? Thanks, Lei Attachments: Quadrature detection_finite_mean.vi 40 KB
-
Document (Originals) Travel through SAP
Hi Experts, I want to know about, how the document (Originals attached to the DIR) actually travel in SAP when saved or Opened in SAP GUI, EDMS, web portal. Here is more explanation about the requirement. 1. When I save an Original Document in a DIR,
-
How to access currently executing SQL statment?
Hello - I have a C language external procedure that is called from an INSERT / UPDATE / DELETE trigger. Is there a way (using OCI, or elsewhere) to get a string containing the SQL statment that fired the trigger? Thanks a bunch for your help! -js
-
In a number of UIComponents there is a value and a binding attribute. What is the difference between these attributes and when should one be used vs. the other?