Please check my XI settings and tell me if i have screwed up some where
Hello friends,
from my yesterday's post i have come to know that few of my XI settings are not working because of which i guess my R/3 -> XI -> R/3 scenario is failing.
Can you quickly look at below settings of mine ad tell me where am i going wrong
1) the pipeline URL that we give while configuring XI Business system. i have given following
http://ps3181:8000/sap/xi/engine?type=entry
Where ps3181 is host name of my XI ,
when i try executing this URL on explorer
it gives <b>service cannot be reached , 403 forbidden</b>
Is it related to configuring Cluster ->Server ->Services -> SLD Data Supplier
On runtime Tab , while configuring HTTP Settings, it asks for Host and Port
Host : my Xi Host
<b>Port : 50000 ( I have given as 50000 , is it right or do I have to give 8000), I tried 8000 but with 8000 the Trigger Data Trasnfer to SLD fails , It works fine with 50000</b>
Let me know what is correct.
2) While configuring
Cluster -> Server-> Services -> Destinations in J2ee Visual Administrator
We create a new Http node named pmistore , url is as below.
<b>http://ps3181:8000/sap/bc/spi_gate , when i try executing this URL in explorer it give service cannot be reached, 403 forbidden.</b>Does that mean something is wrong, What should I get there
3) when I try SXI_CACHE in my XI Box , on right side it gives eror saying ,
<b>XI Runtime Cache Status
Unable to Refresh cache contents
Error during last attempt to refresh cache.</b>
What does it show for you , does it get refresh ?
Please let me know what do i need to do in my XI to make all this work
Hi Rohit,
1) Use the port <b>50000</b>, coz this is for J2EE
stack and <b>8000</b> is the port for ABAP Stack.
and for the 403 forbidden error, check
your RFC connection
<i><b>INTEGRATION_DIRECTORY_HMI</b></i>.
2) check wehther your J2EE engine is up or not?
other wise restart the J2EE engine from the
console.
3) this problem is for the J2EE server down.
from
Yallabandi
Similar Messages
-
Adobe Updater flashes a message on my screen once a week that says "No Internet connection. Please check your Internet settings and/or firewall. Waiting for connection..." Everything else works perfectly on my Internet connection.
I'm experiencing a similar problem.
I have a MacBook Pro Late 2011. I was using Lion (not Mountain Lion) with CS3 with no problems. Recently I installed a new hard drive in my computer and used Time Machine to transfer all my files and settings (still with Lion; I did not try to open any Adobe applications at this point). Then I udpated to Mavericks. Upon trying to open one of the Adobe applications, it told me I needed to reinstall CS3. I inserted the original disc and followed the instructions on the ReadMe file. I went to Applications > Utilities > Adobe Installers > Add or Remove Adobe Creative Suite 3 Design Premium. I did a reinstall, and at the end, it said that some of the components failed to install (see screenshot):
I did a partial install (not all CS3 applications), so there could have been more errors than this if all applications were installed. The applications themselves appear to work fine, but when I try to run the updater, it tells me I have no internet connection.
link470 wrote:
Acrobat updater works just fine [after I install the manual updates till 9.2.0].
Can you tell me where to find these manual updates? I looked on this page:
http://www.adobe.com/support/downloads/collection.jsp?collID=1&platform=Macintosh
but I don't see 9.2.0 for any of the CS3 applications.
The CS3 that I purchased (Design Premium) came with Adobe Acrobat 8. I tried to manually install the 8.1.1 update. It said, "Please choose the copy of Adobe Acrobat Professional to update", but the application is grayed out (see below). I did not try to install any other manual updates, yet.
I'm not sure what to do here besides use my CS3 applications the way they are without updating them ever. (I would rather not subscribe to the Creative Cloud.) Any help will be appreciated. I might try doing a complete unintall followed by a fresh install. -
Creative Cloud is telling me "Unable to reach Adobe servers. Please check your firewall settings, and try again in a few minutes.
What do I do to access the cloud? I have checked my firewall settings to allow for me to be able to use adobe cloud. Any Suggestions?Try a different browser and/or turn your firewall off to download
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
when i try to sign on to to I message I get the error message. IMESsage activation, could not sign in. Please check your network connection and try again. I have a network connection and can access the internet. what do i need to do?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Hi There,
Safari, iTunes, software update iCal not connecting. Firefox is fine.
I have found some archieved discussions about this, but none that went into detail about how to fix problem using proxies - I don't really understand what they are/ do.
I went into the Proxies screen, Only one box was checked, "Use Passive FTP Mode (PASV)" I unchecked it, and made no difference. There was also some stuff written in the "Bypass proxy settings for these hosts and domains" I deleated that and nothing different happened. Have also tried some other DNS numbers, nothing worked yet.
Any suggestions?I still have no idea what was wrong with Safari last week, but I opened it today, and its all working! Hurrah!
Woohoo! I'm a great fan of things fixing themselves. Fingers crossed in New Zealand for no further problems. -
"Please check your network settings and try again....
lately every time I try to sign into Skypemon my IPad. Does anyone know if this is an technical issue that I would have to call my Internet provider(AT&T) about or would have to call tech support at Apple about? Thank you!
Dear Readers,
This message can mean that the version of Skype you are using is no longer in service, and needs to be updated. Please see this FAQ article for more details and explanation than could fit here in these posts:
https://support.skype.com/en/faq/FA34438/why-should-i-update-my-skype-version-what-do-i-need-to-do-t...
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
I have Photoshop elements 6 on a macbook when i try to update i get the message in the title of this question
There are really no updates anymore except for camera raw 5.6 (don't remember if there ever were any others) and i don't think the updater ever really worked in early versions of pse such as photoshop elements 6 anyway
(the updater wouldn't work anymore anyhow since adobe allowed it to "expire")
here are the updates for photoshop elements 6 on mac os
Adobe - Photoshop Elements : For Macintosh -
iMessage Activation. Could no sign in. Please check your network connection and try again.
I have two apple ids.
one for Itunes and other for everything else.
I dont want to use the itunes id for imessage/facetime.
i tried the following solutions to no avail:
1. http://support.apple.com/kb/TS4268.
2. Click on DNS and change the current value to 8.8.8.8,8.8.4.4
3. verified -unverified-verified email.
4.disassociated /removed alternate Apple ids.Hello, Hannaabe.
Thank you for visiting Apple Support Communities.
I see you have already been through most of the troubleshooting steps for this issue. Make sure to take a look at the section below labeled If you've waited 24 hours and still can't activate FaceTime or iMessage.
If you see "Waiting for Activation", "Activation unsuccessful", or "An error occurred during activation"
These messages occur when your iPhone is trying to activate your phone number with iMessage or FaceTime.
To resolve these status messages, follow these steps. After each step, turn FaceTime and iMessage off and on again in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Make sure that you have a cellular network connection with your cellular provider. You need a cellular network connection to activate iMessage and FaceTime with your iPhone phone number.
Go to www.apple.com in Safari to make sure that you have a data connection. You need a data connection to activate iMessage and FaceTime with your iPhone phone number.
Make sure that you can send and receive SMS. You need a valid SMS messaging plan to activate FaceTime and iMessage.
Make sure that FaceTime hasn't been restricted: tap Settings > General > Restrictions > FaceTime.
Set iPhone to the correct time zone: tap Settings > General > Date & Time.
Note: If Set Automatically is on but the incorrect time zone appears, turn Set Automatically off and choose the correct time zone, date, and time.
Contact your carrier to verify that there are no restrictions, blocks, or filters on text messages. Restrictions, blocks, or filters on text messaging will prevent iMessage and FaceTime registration from completing.
If "Waiting for Activation" still appears after you perform these steps, turn FaceTime and iMessage off and on in Settings > Messages and Settings > FaceTime. You may need to wait up to 24 hours to complete activation. Most attempts will take less than an hour, but some attempts may take up to 24 hours. If your issue isn't resolved after 24 hours, please contact Apple for assistance. If you've recently performed a remote wipe on your iPhone, wait 24 hours from the time you performed the remote wipe, and then turn iMessage off then back on.You can still activate iMessage and FaceTime with your Apple ID when these status messages appear. You can see that you've activated FaceTime and iMessage with your Apple ID by tapping:
Settings > FaceTime > You can be reached by FaceTime at:
Settings > Messages > Send & Receive > You can be reached by iMessage at:
If you've waited 24 hours and still can't activate FaceTime or iMessage
If you're still unable to resolve the symptoms above after performing these troubleshooting steps, please contact Apple for assistance.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H. -
On old MacBook Pro Version 10.6.8 downloaded Facetime from the Mac Store as instructed but error loging in says 'Could not sign in.Please Check your network connection and try again'.
I have follwed all these discussion fixes with DNS settings 8.8.8.8 and 8.8.4.4 and refreshing everything but nothing works.
Help!
I have also logged out of my other laptop and closed my phones Facetime.Hi KateD14!
I have an article here that addresses this sign in issue with FaceTime and may have some troubleshooting steps to help you resolve this issue:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Resolution
Try the following:
Ensure that you have an active Internet connection.
Verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website. Other things you should confirm while logged into appleid.apple.com:
Confirm that the email addresse(s) for your Apple ID has been verified.
Check for miss-types of the email address
Check the spelling of the email address
Check that all letters are lower case
Make sure that special characters are correct, e.g. no commas (,) where there is supposed to be full stops (.), etc.
Note You may experience issues if your email address is associated with more than one Apple ID. If you have multiple Apple IDs, log in to appleid.apple.com with each Apple ID and confirm that each email address you wish to use for FaceTime or Messages is associated with only a single Apple ID.
Make sure the date, time, and time zone are set correctly in Data & Time preferences, in System Preferences. Tip: Enable "Set date and time automatically" in Date & Time preferences to automatically keep this information accurate.
If third-party firewall or port filtering software is installed, it needs to be configured to allow connections to apple.com, verisign.com and verisign.net. A list of ports required for using FaceTime and Messages is in Using FaceTime and iMessage behind a firewall. Please consult this article for further help configuring firewalls and Internet security software.
If your /private/etc/hosts file has been modified, make sure that it is not interfering with communications to apple.com, verisign.com or verisign.net servers. Note: Some third-party software installers may modify the /private/etc/hosts file without alerting you. Instructions about how to check and resolve issues with a /private/etc/hosts file are in the "Blocked by configuration: (Mac OS X/Windows)" section of iTunes: Advanced iTunes Store troubleshooting
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
I am currently receiving this error message when trying to log in to iMessage on my MacBook Pro (Mavericks), "Could not sign in. Please check your network connection and try again."
I have never had an issue until the past few days as I have been setting up my new iPhone 5s. I used to have an iPhone 4.
When I go to the 'Messages' App., Preferences> Accounts> the iMessage account is set as "(Inactive)".
My Apple ID appears to be working fine in iCloud, the App. Store etc.
Thank you for your help.Check Enable this account in Preferences. Try logging in again.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
Messages – Can’t log in
Messages - Error Processing Registration -
I am trying to log into FaceTime and iMessage and I keep getting the error "iMessage Activation Could not sign in. Please check your network connection and try again." We have used these features in the past. Please help to get the working.
Try the troubleshooting steps listed under the error message you are getting in this article: http://support.apple.com/kb/TS4268.
-
Hello,everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
1: VCCAUX Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time = 23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
1: VCCAUX Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID: 49
INFO:iMPACT - Vendor ID: 01
INFO:iMPACT - Device Code: 18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time = 814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank youHi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the same configuration problem, I want to consult you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.
-
I am trying to update my iPad 1 to the 5.1 version so I hooked it up ajd I click update and it just says cannot find a server please check your network settings or try again later what should I do
See
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update.
Cheers, Tom -
Every time I try to login to my FaceTime it tells me could not sign in. Please check your network connection and try again.
Hi jackelyne johnson,
Thanks for visiting Apple Support Communities.
You can use the steps in these articles to troubleshoot FaceTime on your Mac if you're not able to sign in:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Best Regards,
Jeremy -
i can activate my FaceTime it tells me "could not sign in please check your network connection and try again"
Hi jackelyne johnson,
Thanks for visiting Apple Support Communities.
You can use the steps in these articles to troubleshoot FaceTime on your Mac if you're not able to sign in:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Best Regards,
Jeremy
Maybe you are looking for
-
Dv4 1123us hdmi sound crackling
Hi All, I have a dv4 1123us. When I connect the laptop to my tv , the sound is popping and cracking every few seconds. I tried with a different laptop and there wasn't any problem. I also downaloded the most recent drivers but it didn't help either.
-
HT5096 I need to transfer a time machine backup to a new drive. It keeps failing.
I have a 2TB Time Capsule that I was using for Time Machine for both a MacBook and an iMac. The iMac sparse bundle became corrupted earlier this spring and I was unable to delete it, so I need to reformat the TC. First, however, I need to move the T
-
Please help, I an unable to update any apps on my ipad through the App Store. It will not connect. Also, I am no longer able to log in to bingo bash app and my towers app will not connect either. If I restore my ipad will that fix the problem and if
-
External Hard Drive Data Recovery
Hello Apple Support Communities! I have a Western Digital 320GB external hard drive and it currently has 0 bytes available. This has prevented me from even viewing the hard drive on my finder window. I can only see it in disk utility. I have tried re
-
Urgent! group by query based on a logical OR (bitwise)
Let's say I have the following table: field: f1 f2 f3 f4 f5 record 1: a a 1 0 4 record 2: a b 2 3 7 record 3: a b 0 8 1 I want to make a group by on f1 so that I get just one record which is: field: f1 f3 f4 f5 record 1: a 3 11 7 where the result of