Please check once!

Please go through below point and you have any ans. Reply me.
Note: ekpo-matnr is 18 char. And kssk-objek is 50 char.
12) Classification data
      Pick the value of EKKO-EBELN and input the same in EKPO-EBELN. From table EKPO,
      get the value of EKPO-MATNR. Now input the value of EKPO-MATNR in KSSK-OBJEK
      with leading Zeros. The total number of digits in KSSK-OBJEK should always be 18 so the
      number of leading zeros needs to be adjusted. Now from KSSK table, pick the value of
      KSSK-CLINT and input the same in KLAH-CLINT. From KLAH table, display the value
      KLAH-CLASS.
   13) Characteristics and its Values
     Pick the value of EKKO-EBELN and input the same in EKPO-EBELN. From table EKPO,
     get the value of EKPO-MATNR. Now input the value of EKPO-MATNR in AUSP-OBJEK
     with leading zeros. The total number of digits in AUSP-OBJEK should be 18 so the numbers
     of zeros need to be adjusted. Now from AUSP table, pick the value of AUSP-ATINN and
     AUSP-ATWRT.
             For e.g. display should be something like this:
            Class               Characteristics            Characteristics Value
            Class Name      Char1                            Value1
                                     Char2                            Value2
                                     Char3                            Value3

Hmmm... looking at your other 270 questions (particularly the 258 unresolved ones), I have decided to think for while before I answer.
In the meantime, please read [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] for an insight into what it is I am thinking about.
Julius

Similar Messages

Sir, We have around 500 items as Insurance Spares in the stores. These spares are checked once in 6 months for their healthiness, storage, etc with a special checklist. We want this checklist an schedule in SAP ( MM). How to do it? Please help.

Sir, We have around 500 items as Insurance Spares in the stores. These spares are checked once in 6 months for their healthiness, storage, etc with a special checklist. We want this checklist an schedule in SAP ( MM). How to do it? Please help.We are presently doing it as similar to PM schedule ( PM module) but want it in MM module.

Hi Prerna
Please refer the this doc ...it might help you
http://www.erptips.com/Samples/ERPtips-SAP-Training-Manual-SAMPLE-CHAPTER-from-Basic-Quality-Management.pdf
and kindly update the status if it works or not
Regards
Partha

Adobe Updater flashes a message on my screen once a week that says "No Internet connection. Please check your Internet settings and/or firewall. Waiting for connection..." Everything else works perfectly on my Internet connection.

Adobe Updater flashes a message on my screen once a week that says "No Internet connection. Please check your Internet settings and/or firewall. Waiting for connection..." Everything else works perfectly on my Internet connection.

I'm experiencing a similar problem.
I have a MacBook Pro Late 2011. I was using Lion (not Mountain Lion) with CS3 with no problems. Recently I installed a new hard drive in my computer and used Time Machine to transfer all my files and settings (still with Lion; I did not try to open any Adobe applications at this point). Then I udpated to Mavericks. Upon trying to open one of the Adobe applications, it told me I needed to reinstall CS3. I inserted the original disc and followed the instructions on the ReadMe file. I went to Applications > Utilities > Adobe Installers > Add or Remove Adobe Creative Suite 3 Design Premium. I did a reinstall, and at the end, it said that some of the components failed to install (see screenshot):
I did a partial install (not all CS3 applications), so there could have been more errors than this if all applications were installed. The applications themselves appear to work fine, but when I try to run the updater, it tells me I have no internet connection.
link470 wrote:
Acrobat updater works just fine [after I install the manual updates till 9.2.0].
Can you tell me where to find these manual updates? I looked on this page:
http://www.adobe.com/support/downloads/collection.jsp?collID=1&platform=Macintosh
but I don't see 9.2.0 for any of the CS3 applications.
The CS3 that I purchased (Design Premium) came with Adobe Acrobat 8. I tried to manually install the 8.1.1 update. It said, "Please choose the copy of Adobe Acrobat Professional to update", but the application is grayed out (see below). I did not try to install any other manual updates, yet.
I'm not sure what to do here besides use my CS3 applications the way they are without updating them ever. (I would rather not subscribe to the Creative Cloud.) Any help will be appreciated. I might try doing a complete unintall followed by a fresh install.

TS1424 I am having issues downloading music from iTunes, it comes up saying an unknown error has occurred - please check your network connection. Now I can connect to iTunes store and have itunes as an exception for downloads so don't know what else to do

Hello, I've started having an issue downloading songs and apps from iTunes to our PC which has Windows XP Professional installed. We also use Karspersky Anti-Virus and Firefox as an internet browser. Have never had this issue before, it comes up with "An unknow error has occured and downloads are stopped with an error 8003. Also says please check your network connection" We have no issue connecting to iTunes store or the network so not sure how to fix this. It is very frustrating. Have checked Windows Firewall and iTunes is an exception, can't think of anything else why it won't work.

I sounds as though you need to start again. The following article tells you how to completely remove iTunes and Quicktime. If you didn't actually install iTunes you wont find it in add/remove programs so you can't do that bit, but still delete the iTunes folder in Program Files as advised in the article.
http://docs.info.apple.com/article.html?artnum=93698
Once you have got rid of them, try installing the latest version of iTunes. There is a link to it in the article.
Itunes wont move your music for you, get iTune sgoing then ask again.

"The drive is not ready for use; its door may be open. Please check drive \

3G IPOD problems which are driving me mad and i can see others have had the same problem but i can't find any solution written down.
Basically my IPOD either freezes after a couple of songs or it downloads about 6Gb (of 40) and the freezes with the following message:
"The drive is not ready for use; its door may be open. Please check drive \Device\Harddisk2\DR6 and make sure that a disk is inserted and that the drive door is closed"
I've tried re-setting, installing etc but no luck. Any suggestions/solutions?
Laptop - Packard Bell Notebook Windows XP

Hmmmm. I'm not sure how to explain this.
You need to change the Drive Letter for your iPod.
You should be able to connect your iPod then open Windows Explorer and right click on your iPod(which seems to be Drive E:) and change it to a different letter (like H).
If you haven't enabled disk use for your iPod it probably won't appear in Windows Explorer.
To enable disk use: connect iPod, open iTunes. Open Preferences and select the iPod tab. Choose "enable disk use."
Once you've done all that, try resyncing.

Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."

Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor Pro

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

Need help with threads?.. please check my approach!!

Hello frnds,
I am trying to write a program.. who monitors my external tool.. please check my way of doing it.. as whenever i write programs having thread.. i end up goosy.. :(
first let me tell.. what I want from program.. I have to start an external tool.. on separate thread.. (as it takes some time).. then it takes some arguments(3 arguments).. from file.. so i read the file.. and have to run tool.. continously.. until there are arguments left.. in file.. or.. user has stopped it by pressing STOP button..
I have to put a marker in file too.. so that.. if program started again.. file is read from marker postion.. !!
Hope I make clear.. what am trying to do!!
My approach is like..
1. Have two buttons.. START and STOP on Frame..
START--> pressed
2. check marker("$" sign.. placed in beginning of file during start).. on file..
     read File from marker.. got 3 arg.. pass it to tool.. and run it.. (on separate thread).. put marker.. (for next reading)
     Step 2.. continously..
3. STOP--> pressed
     until last thread.. stops.. keep running the tool.. and when last thread stops.. stop reading any more arguments..
Question is:
1. Should i read file again and again.. ?.. or read it once after "$" sign.. store data in array.. and once stopped pressed.. read file again.. and put marker ("$" sign) at last read line..
2. how should i know when my thread has stopped.. so I start tool again??.. am totally confused.. !!
please modify my approach.. if u find anything odd..
Thanks a lot in advance
gervini

Hello,
I have no experience with threads or with having more than run "program" in a single java file. All my java files have the same structure. This master.java looks something like this:
---master.java---------------------------------------------------
import java.sql.*;
import...
public class Master {
public static void main(String args []) throws SQLException, IOException {
//create connection pool here
while (true) { // start loop here (each loop takes about five minutes)
// set values of variables
// select a slave process to run (from a list of slave programs)
execute selected slave program
// check for loop exit value
} // end while loop
System.out.println("Program Complete");
} catch (Exception e) {
System.out.println("Error: " + e);
} finally {
if (rSet1 != null)
try { rSet1.close(); } catch( SQLException ignore ) { /* ignored */ }
connection.close();
-------end master.java--------------------------------------------------------
This master.java program will run continuously for days or weeks, each time through the loop starting another slave process which runs for five minutes to up to an hour, which means there may be ten to twenty of these slave processes running simultaneously.
I believe threads is the best way to do this, but I don't know where to locate these slave programs: either inside the master.java program or separate slave.java files? I will need help with either method.
Your help is greatly appreciated. Thank you.
Logan

Cannot launch vivado simulator 2015.1: behav/compile.bat' script "Please check that the file has the correct 'read/write/execute' permissions"

Hi,
I'm trying to run a verilog simulation using the vivado simulator 2015.1 on Windows 7.
I get the following error when I attempt to launch simulation:
ERROR: [USF-XSim-62] 'compile' step failed with error(s) while executing 'D:/projects/axi/axi_test_system/axi_test_system.sim/sim_1/behav/compile.bat' script. Please check that the file has the correct 'read/write/execute' permissions and the Tcl console output for any other possible errors or warnings.
The tcl console repeats the same message, "Please check that the file has the correct 'read/write/execute' permissions"
I cannot find any problem with the permissions. I believe that windows will always execute a .bat file.   Within the same project, I can run elaboration, synthesis and implementation without problems.
Any idea why the simulation compile script won't run?
Thanks,
Ed

Hi,
Thanks very much for your detailed reply. These were the right questions based upon what I told you.
However, I took the code home last night and ran it on my webpack 2014.2 release.   It still failed, but I got completely different error messages.   These messages correctly pointed me to an undeclared signal in my testbench. Once fixed, the compile worked and the simulator launched.
This morning, I fixed the signal name in my 2015.1 setup, and it also compiled and launched correctly.
So, the problem wasn't actually related to file permissions. It seems like the 2015.1 error message may be broken compared to 2014.2.
I was running the Vivado GUI, clicking on "Simulate > Run Behavioral Simulation"
Thanks again for your help.
Regards,
Ed

Adobe FLME Error Message "Please check if video devices are connected properly and are not used by any other application."

Hello, I'm trying to use my MAC Book Pro with Adobe FMLE. Once I select either my internal or external camera and microphone, in the live encoder I get this error message. "Please check if video devices are connected properly and are not used by any other application." The Facetime HD camera works in Photo Booth. Can someone assist me in what to do please, Thanks in advance!

Hi all ,
We found the solution for this issue .
We have installed the crypto library in global executable directory and any way it will replicate those binaries to individual application servers.
But the parameters are still looking for global executable directory for loading crypto library during time.
So all application servers are trying to load crypto library files from global "exe" instead of local directory, which was clustered .Sometimes during heavy network load it may cause some delays to load the libraries to individual application servers and in turn is causing the license key issues.
Note 982056 - The license key library has not been initialized yet..
SAP Recommend option for all SSF parameters should be instance profile parameters not in default parameters..This was mentioned in below note:
Note 662340 - SSF Encryption Using the SAPCryptolib --- .
But in our Environment SSF and SEC parameter were set in DEFAULT profile instead Instance profile.
Recommendations:
o ssf/ssfapi_lib = <Path and file name of SAPCRYPTOLIB>
o sec/libsapsecu = <Path and file name of SAPCRYPTOLIB>
This was mentioned in the below SAP HELP.
http://help.sap.com/saphelp_nw04/helpdata/en/3d/bf463c6796e61ce10000000a114084/frameset.htm.

Facetime error "Could not sign in. please check your network connectivity and try again

When I try to log in to Facetime on my iMac, it gives me the an error. "Could not sign in. please check your network connectivity and try again" I have already tried fixing the time and I dont have any firewall installed

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage and FaceTime on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
           ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
           ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
           ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
          Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reset the System Management Controller (SMC).
Step 14
Reinstall OS X.
Step 15
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. When you set up a support call, select "Apple ID" as the product you need help with, not the hardware model. That way, if you're not under AppleCare, you may be able to talk your way out of being charged for the call.

Error message "Save image error! Please check your profile"

Hi,
I have installed the second version of the Lens Profile Creator. When analyzing the images all is working fine and it is at the end where the following error message appears -
- Save image error! Please check your profile path and permission of the folder.
I have check and I cant anything that looks strange.
Have anybody seen this problem before ?
Thanks for any help solving this
/Mikael

Hi Simon,
Thank you, it was doing what you asked me when I realized that I had previous V1 file from ALPC in the structure.
Once I removed them It all worked well
Thanks
MIkael
Le 8 sept. 2010 à 04:15, simonsaith a écrit :
Please go to the ALPC preference dialog and see where is the default save profile location. Check if the folder exists on your system and whether you have permission to write to the folder.
-Simon
>

The data form is invalid. Please Check log for details.

Hi.
Recently i have migrated an application from scratch onto same datasource where application earlier was hosting on. i have deleted the application and making use of same datasource i have created the application again and migrated the artefacts and imported,refreshed and loaded the data into essbase db, once after the migration am not able to open some data forms and after the essbase restart i am able to some and others are still giving the same error message as earlier "The data form is invalid Please check log for details.".
Could anyone help on this. have gone through different otn answers but unable to reach at point.
Thanks
Amith

Try Oracle Support:
Error "1012703 Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled" During Calculation (Doc ID 744529.1)
or
Error: "Unknown calculation type [0] during the dynamic calculation. Only default agg/formula/time balance operations are handled." (Doc ID 593227.1)
Cheers
John
http://john-goodwin.blogspot.com/

Error Code -OVM-1000 OVM Manager could not connect to {0}, please check

Hi
When i tried to import the template through OVM Manager it throws the follownig error.(It was working fine before)
OVM Manager could not connect to {0}, please check the IP and Oracle VM agent password.
I did the following trouble shooting
1.Reset the OVS agent password but didnt work.
2.I am able to import ISO files and created the shared disks.
3.Checked the connectivity between OVM Manager to OVS server and checked /etc/hosts file,firewall settings ( disabled state in both) & timings also.
But i couldnt pinpoint the exact issue. Can anybody help me out on this?

Fixed it. Shutdown all the VMs and rebooted the base server. Configured the ovs-agent ( ovs-agent configure) again and restarted the ovs-agent.(ovs-agent restart). Now i am able to import the templates.
Also OVM Manager shows all the VMs in shutdown status after reboot the base server and i fixed it used "Reset" button in OVM Manager.
1) Click on the Virtual Machines tab found on the top left corner.
2) Select the radio button of the appropriate virtual machine that has the incorrect status displayed.
3) Click on the ‘More Actions:’ drop down box and select the option ‘Reset’
4) Click the ‘Go’ button for the reset to take place.
Once the ‘Go’ button is selected, the virtual machine will reset and display the appropriate virtual machine status.

HT204408 Could not sign in. Please check your network connection and try again

Hi. I have been getting the error "Could not sign in. Please check your network connection and try again." For imessage and facetime on my ipad 4 16gb wifi only. This only started when I upgraded to ios7. i have tried resetting all and my network settings, changing the DNS to 8.8.8.8 and 8.8.8.8.4.4.4.4, setting my time and date to automatic, and changing my apple id password. I tried to use another person's apple id to sign in but I'm getting the same error. I'm pretty sure my network connection is not the problem because my parents are both using iphones and have upgraded to ios7 but imsg and facetime still works for them. Help?

Hi all, I have just fixed this issue on my daughters and her friends iPad, problem with iMessage and FaceTime, when you try to sign in it tells you to check your network.
No need to do a full back up and restore!!!
Go to Settings / General / Reset / Reset all settings.
This will not cause you to lose any photos apps or media.
Please note you will need to reset your time zone and wifi settings etc once you have completed this task so make sure you have your wifi key to hand.
Once it has restarted and you have re-entered the time and wifi settings go back into
Settings / Messages and sign in to iMessage using your Apple ID and password.
Then
Settings / FaceTime and sign in to FaceTime using your Apple ID and password.
All sorted. Enjoy.

Please check once!

Similar Messages

Maybe you are looking for