Please check the entries, no work list selected

Hi Experts,
We have created one custom transaction to run RV50SBT1 to create deliveries from open purchase orders.
When we are doing a call transaction to the custom transaction in a report, this does not work and does not select open POs for processing.
However, when we run the custom transaction in foreground mode, we get the open PO to process and delivery is created ("create delivery immediately" is checked in all the cases).
I assume that there won't be any issues due to background/foreground processing (as we have tried call transaction in foreground mode and it did not work).
Also, i would like to highlight that this problem is recent one.
There were no recent changes in the program or user profiles(user who is executing the IDOC).
Thanks
Mohit

Hi Neha
Yes, there is a difference in background and foreground processing. Please check if you have any pop up while you are processing in foreground. If this occurs, it will cause issues in the background processing. Please take help of your ABAPer to understand the issue in code. and change the pop up into warming message.
Regards
Vivek Singh

Similar Messages

Please check the order's object list (inconsistency SOBJ)

Hi Friends;
I am facing a strange issue where I have copied a custom task from SAP standard decision task 00008267 caz I needed to perform some custom requirement on it.
I have done evry thing but then I have observed that Agent assignment is not coming at testing client which is on same server.
I also can not modify any thing at testing client.
So I performed SCC1 from testing client and check but still same issue.
Then I thought of re assigning agent at development client but while making it general task it pop up the message "Please check the order's object list (inconsistency SOBJ)".
And after again performing the SCC1 still the issue exist.
Can any one suggest their inputs where the problem could be and how should I fix it.
Regards
Devraj

Hi Dev,
Can you please share more details? Agent assignment not coming means?
Have you set the task as General in testing client?
Thanks,
Viji.

There was a problem connecting to the server "Time Capsule". The share does not exist on the server. Please check the share name, and then try again.

The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

There was a problem connecting to the server...please check the share name..every 3 seconds. made computer useless

there was a problem connecting to the server...please check the share name..every 3 seconds. made computer useless. Lion. It only complains about one of my PCs that usually shares OK with the imac.

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

Your address was not recognized. Please check your entry and try again.

I'm trying to register for the free 30 day trial.
I get
"Your address was not recognized. Please check your entry and try again."
My address works fine for the postman, deliveries etc. Another case of a programmer who knows better!
What are the address requirements on the sign-up form, so I can proceed?
Pete

Hi
Which product do you want to register for? Office 365, SharePoint or Office 2013?
Since this forum is to discuss problems of Office development such as VBA, VSTO, Apps for Office, and your question is related to the free trial registering of Microsoft products, I suggest you posting it in Answers
Forum for more efficient responses.
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

Please check the below Cursor Procedure and correct that code Please

Hai Every One.
Please check the below code I have two issues in that code
1. Invalid cursor
2. Record must be enter
Please correct this code and send me pls its urgent.I cont understand where i done mistake
PROCEDURE fetch_detail_PROC IS
cursor c1 is select * from quota_mast where quota_mast.divn=:quota_mast.divn and quota_mast.QUOT_tyPE=:quota_mast.QUOT_tyPE and quota_mast.INQNO=:quota_mast.INQNO;
cursor c6 is select * from quota_det
where quota_det.divn=:quota_mast.divn AND quota_det.QUOT_TYPE=:quota_mast.QUOT_tyPE and quota_det.enq_num=:quota_mast.INQNO
ORDER BY quota_det.quot_no;
--cursor c5 is select * from acc_mst where cdp=:quota_mast.ccdp and divn=:quota_mast.divn;
--vn acc_mst%rowtype;
i quota_mast%rowtype;
detail1 quota_det%rowtype;
BEGIN
     GO_BLOCK('quota_mast');
for i in c1 LOOP
          :quota_mast.INQNO:=i.INQNO;
                    :quota_mast.DIVN:=i.DIVN;
               :quota_mast.QUOT_NO:=i.QUOT_NO;
                    :quota_mast.quot_type:=i.quot_type;
                    :quota_mast.CCDP:=i.CCDP;
                    select nm into :QUOTA_MAST.PARTY_NAME from acc_mst where acc_mst.DIVN=:QUOTA_MAST.DIVN AND acc_mst.cdp=:ccdp;
                    :quota_mast.pak_for:=i.pack_for_PER;
                    :quota_mast.exc_duty:=i.exc_duty_PER;
                    :quota_mast.vat:=i.vat_PER;
                    :quota_mast.cst:=i.cst_PER;
                    :quota_mast.wct:=i.wct_PER;
                    :quota_mast.ser_tax:=i.ser_tax_PER;
                    :quota_mast.insu:=i.insu_PER;
                    :quota_mast.tot_tax:=i.tot_tax;
                    :quota_mast.tot_val:=i.tot_val;
               :quota_mast.value:=i.value;
                              next_record;
end loop;
     first_record;
GO_BLOCK('quota_det');
               for detail1 in c6
          loop
                    :quota_det.quot_no:=detail1.quot_no;
          :quota_det.ENQ_NUM:=detail1.enq_num;
          :quota_det.item_code:=detail1.item_code;
          SELECT ITNM into :NM FROM itm_MST WHERE DIVN=:quota_mast.DIVN AND iCDP=:ITEM_CODE;
          :quota_det.price:=detail1.price;
          :quota_det.qty:=detail1.qty;
          :quota_det.DISC_PER:=detail1.DISC_PER;
               next_record;
END LOOP;
     first_record;
close c6;
--close c1;
exception
when others then
message(sqlerrm);
message(' ');
END;
Thank you..

Oracle Forms is closely tied to the database meaning you can base your data blocks on your tables and Forms will handle fetching the data. I agree with Christian, your tables lend themselves to using a master - detail configuration and if you need to filter your block then you can use the Data Block WHERE Clause property.
Please correct this code and send me pls its urgent.As to the urgency of your request, the forum is a community of "Volunteers." Enough said.
Regarding your code, I see a several potential problems.
First, how are your QUOTA_MAST and QUOTA_DET blocks synchronized? Are you using a block relationship? Are you using a combination of triggers to synchonize the QUOTA_DET block when you user navigates to a different record in the QUOTA_MAST block?
Second, your Procedure name is "Fetch_Detail_Proc" but you are also fetching Master data as well. What is the purpose of your procedure and where do you call this procedure?
Third, you're using SELECT * in your cursor queries. You should always explicitly name each column. What happens when your table changes and you need to search your code for a column that was dropped?
Fourth, your cursor queries are referencing the same data blocks you are fetching data to populate. This gives the impression that you already have data in your block. This doesn't make sense - could you explain what you are trying to accomplish?
Fifth, with respects to your code, the "Invalid Cursor" error (is this really the error you're getting?) is most likely caused by your explicit call to close the C1 cursor. As Andreas stated, when using a CURSOR FOR LOOP, the cursor is automatically opened, fetched and closed using this construct. There is no need to explicitly close the cursor, in fact - doing so will result in an invalid cursor error.
As to the "Record must be entered" error, is sounds like you have required items in your block or your QUOTA_MAST block is not synchronized with your QUOTA_DET block, so when you attempt to navigate to a different block or record within your the same block the navigation cursor can't move because you haven't entered data that is required.
Please tell us what you are attempting to do with this code so we can tell you if you are using the correct method.
Craig...

Passing values to subreport in SSRS throwing an error - Data Retrieval failed for the report, please check the log for more details.

Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
Divya

Hi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

What does this mean? The mail server responded: Too many messages. Please check the message and try again.

I use BT yahoo mail with Thunderbird 24.6.0 in the last few days i've started getting this message when sending messages:
An error occurred while sending mail. The mail server responded: Too many messages. Please check the message and try again.
Now sometimes the messages are sent anyway and sometimes not. If I re-send sometimes it works and sometimes not. I've contacted BT 'tech support' who tell me there is nothing wrong with them or their servers and as webmail works ok they won't help. I strongly suspect it IS a BT issue, Any clues to fix this?

The message means BT are lying basically. I have just spent the best part of an hour on chasing what limits BT place on mail sending... the internet contains a void.
The closest thing I can locate is a BT rep here https://community.bt.com/t5/Email/E-Mail-message-limit/m-p/1045228/highlight/true#M17523 refusing to identify what limits they impose but advising their switch to critical path has more stringent controls. AFAIK Critical path is ca mail software solution sold by OpenWave Messaging http://owmessaging.com/
So your paying for a totally undefined service. Congratulations!

ATTENTION: Please fix the above failed worker(s) so the manager can continu

i am applying a patch p11067286_R12.AP.B_R12_GENERIC.zip , i am facing the error
ATTENTION: Please fix the above failed worker(s) so the manager can continue
i restart all the workers with adctrl but same problem .
please need urgent help

user13376823 wrote:
Dear Hussein,
i am finding these errors in one log file
AD Worker warning:
Product Data File
/opt/oracle/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.Hi;
This is ignorable error, please check workerlog file last 50 lines, you should see something like below:
FAILED: file adorgcnv.pls on worker 1 for product ad username APPLSYS.
FAILED: file adorgcnv.pls on worker 2 for product ad username APPLSYS.
FAILED: file adorgcnv.pls on worker 3 for product ad username APPLSYS.
FAILED: file adorgcnv.pls on worker 4 for product ad username APPLSYS.
Done reading jobs from FND_INSTALL_PROCESSES table ...
Telling workers to read 'todo' restart file.
Done.
ATTENTION: All workers either have failed or are waiting:
FAILED: file adorgcnv.pls on worker 1.
FAILED: file adorgcnv.pls on worker 2.
FAILED: file adorgcnv.pls on worker 3.
FAILED: file adorgcnv.pls on worker 4.
ATTENTION: Please fix the above failed worker(s) so the manager can continue
Regard
Helios

GL Account : Cannot be posted to cost object, please check your entry

Dear All,
I've problem in general posting or in FBCJ (cash journal) ....
When I try to make journal : Debit Expense and Credit Cash in F-02 or in FBCJ then I chose Post an error appear " Cannot be posted to cost object, please check your entry " ..
Because GL account "Expense" assigned to cost element, I need to fill cost object ... when I filled it with Internal order or WBS, the error appeared , but there was no error when I filled with Cost center ....
For your info there was no problem with Field Status Group ( I thought ) cause I ticked with Optional entry for WBS and IO ...
Beside it, I've assigned the company code in Controlling Area and Operating Concern ...
Network in WBS was in optional
Please give me solutions
BR,
David Sindhu
Edited by: david_sindhu on Jan 26, 2011 12:06 PM

Hi Alex,
The posting key was 40 and there was no problem as I choose Optional ..
My WBS was not statistical ...
Any idea ?
Edited by: david_sindhu on Jan 27, 2011 3:18 AM

Help-Task not found - Please check the Task Type, Name and Location are cor

HI all,
i have upgraded my owb from version 11gr1 to 11gr2. the installation is complete and all my mappings and objects are imported successfully.
i was able to execute the mappings using the sql code:
@/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
by logging into sqlplus as the user in whose schema mappings are deployed.
hOwever, suddenly i am getting the error since sometime back - not sure what might have happened or what might have gone wrong. can someone please help me understand what might be wrong - how to decode this?
Here is my error:
@/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
Role set.
Enter value for 1: WSODS
Call completed.
Enter value for 2: ODS_SCHEMA
Enter value for 3: PLSQLMAP
Enter value for 4: MAPPING_1
Enter value for 6: ","
Enter value for 5: ","
Stage 1: Decoding Parameters
| location_name=ODS_SCHEMA
| task_type=PLSQLMAP
| task_name=MAPPING_1
Stage 2: Opening Task
begin
ERROR at line 1:
ORA-20001: Task not found - Please check the Task Type, Name and Location are
correct.
ORA-06512: at "OWBSYS.WB_RT_API_EXEC", line 759
ORA-06512: at "OWBSYS.WB_RT_SCRIPT_UTIL", line 910
ORA-06512: at line 2When i execute this: i get the result as follows:
SELECT warehouse_object_id, store_id, object_type_id, object_type_name, object_name FROM owb$wb_rt_warehouse_objects
where object_name = 'MAPPING_1';
WAREHOUSE_OBJECT_ID STORE_ID OBJECT_TYPE_ID OBJECT_TYPE_NAME OBJECT_NAME
15947 15325 769 PLSQLMap MAPPING_1
1 rows selectedEdited by: Chaitanya on Mar 5, 2012 3:33 AM

Hi Chaitanya,
Did you get any resolution for this error? I'm facing the same error while trying to execute OWB mapping through this command.
Any help would be much appreciated. Thanks.
Regards,
Jagari

When I try to FaceTime on my ipad it says face time failed please check the number but it says this on every number

When I try to FaceTime on my ipad it says face time failed please check the number but it says this on every number and I know thier correct

Read this
http://support.apple.com/kb/TS5419
As of april 16 every device that uses facetime must be updated to acertain level or it won't work. And the 'catch' is that it applies to your device and the person you're calling.

Network Error, Please Check The Network!

"Network Error, Please Check The Network!" - I get this error message on the bottom of my screen at least a few times a day when all of my service drops, not just data. I've seen my service go from full 4G coverage one second to absolutely nothing the next, without moving and outside. Sometimes it comes back after a minute or two, other times I have to shut the phone off and pull the battery. I thought it may have been the SIM card but I had that replaced and nothing has changed. I've seen other people describing similar things happening to them as well. I've brought it in 2 times in the last 2 weeks because it was getting unbearable and both times none of the reps could explain why this is happening. I'm wondering if I have a bad device or if this is a widespread issue, and if anyone had this issue and found a fix for it.

I was having this problem as well. Tried hard reset, Verizon messed with phone remotely, etc...Ended up sending me a replacement phone. You may have to go through the steps and let the problem not be fixed, but I would call the 800 number from a land line and get the ball rolling. Mine was also doing weird things like freezing up when I tried to make a call. It would never make it to the screen with the dialer. It would just freeze up and go to the home screen. It ran slow and lagged real bad as if it was deciding if it wanted to work or not. Regardless, Verizon was great and when the usual steps could not fix it they replaced it. Mine is a droid razr (original).

Please check the entries, no work list selected

Similar Messages

Maybe you are looking for