Please clarify license about server managed and configuration manager client ML system center 2012

Could clarify why managed servers License required ,already we bought the configuration manager client ML License ? We are planing to buy system center operation manager 2012

Hello,
if you wants planing to Monitoring your AD with Exchange Server and you have only one physical Server with for example 2 CPUs and 2 VMs, you need to purchase the System Center Standard 2012 R2 SML for Monitoring your Server environement. However, if
your AD is a datacenter or for example 4 x Windows Server Standard with 8 VMs than, you need to purchase the System Center datacenter SML.
the System Center SML is licensed per physical Server: one license up to two physical CPUs. if you have for 2 physical Hosts with 2 CPUs each, you need to purchase two System Center licenses.
the only difference between Standard and datacenter is only about virtualization rights
for System Center Operation Manager for your Clients Desktop, you need to purchase the System Center Client Management Suite includes: Operation Manager; Services Manager; Data Protection Manager and Orchestrator.
thanks
diramoh

Similar Messages

Managing Mac OS X clinet with System Center 2012 Configuration Manager

toby wells wrote:Most large sites would use Casper for Mac management....Does work best. OS X has its own ecosystem, and preference is to stay with it. Know Apple specifically intends 3rd party development of these management tools, and Casper is the established veteran option.
Keep in mind the other OS X admin tools—
OS X Server ($20, only need a Mac to install software)
ARD (Apple Remote Desktop)ReposadoMunkiTime Machine Server (great as current OS X versions allow multiple Time Machine mount points)etcJAMF, makers of Casper Suite, has its own ecosystem, community, user groups, and annual conference—http://www.jamfsoftware.com/products/https://jamfnation.jamfsoftware.com/http://www.jamfsoftware.com/events/jamf-nation-user-conference/etc

hi guys
I am keen on getting some sort of control on Mac OS X clients on my IT environment via SCCM2012 R2
Has any one done this? I did research on Google and couldn't find proper How to guide.
Feedback much appreciated
This topic first appeared in the Spiceworks Community

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Team Foundation Server 2010 and System Center 2012 SP1 Operations Manager WorkItem Synchronization fail

Hello,
We are currently implementing a Devops solution with SCOM 2012 SP1 and TFS 2010 SP1 and we would like to synchronize APM alerts with TFS and the Operational Issue WorkItem. However we are not
able to sync anything.
Here is our environments :
Products :
SCOM
System Center Operations Manager 2012 SP1
French
OS: Windows 2012 SP1 Std x64
French
DB: SCOM SQL Server 2012 SP1 x64
Management Pack
MP Operations Manager TFS Work Item Synchronisation 7.0.9538.0
MP Alert Attachement 7.0.9538.0 (We have also try the version in the VM DEVOPSALL : 7.0.9538.1005)
TFS
Team Foundation Server 2010 SP1
French 10.0.40219.1
OS: Windows 2008 R2 SP1 Std x64
French
DB: TFS SQL Server 2008 x64
TFS 2012 Object Model Installer (We have also try the version 2010)
Here is our configuration :
TFS Platform
This a French platform with a project based on the Process Template SCRUM 1.0 alone in a Team Project collection. The Operational Issue import completed successfully. It’s possible to manipulate
Operational Issue for all of its states from TFS.
SCOM Platform
We followed the documentation at :
http://technet.microsoft.com/en-us/library/jj883936.aspx
to configure SCOM Alert Attachment and Operation Manager Tfs Work Item Synchronization. Everything seems to be ok. All configurations succeed. We did not configure Intellitrace collector.
The problem occurs when we are trying to push an APM alert to TFS. When we assigned an alert to the Engineering nothing is synchronized in TFS. There is no error in the event viewer on the TFS
server. But, on the SCOM server we get 2 exceptions raised by Microsoft.EnterpriseManagement.Modules.Apm.TfsWISync.OMModules. We provide you the log of the SCOM Server in this mail.
Detailed exceptions :
Exception message are in French. In English it could be : OEF expected. The followed elements are not closed : Source, Link.
Microsoft.SystemCenter.TfsWISync.SyncAttachments.Rule
TFS Work Item Synchronisation ServerName
{EC924637-2725-7C94-8F37-013B657F4530}
Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.OMModules.ReadOpenAlertsModule
System.Xml.XmlException: Fin de fichier inattendue. Les éléments suivants ne sont pas fermés : Source, Link. Ligne 1, position 65537.
   à System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
   à System.Xml.XmlTextReaderImpl.ParseElementContent()
   à System.Xml.XmlReader.ReadString()
   à System.Xml.XmlReader.ReadElementString(String name)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.Common.DataItems.Links.DeserializeInternal(XmlReader reader)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.Common.DataItems.Links.Deserialize(String mappings)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.OMModules.ReadOpenAlertsModule.InitializeConfiguration(XmlReader reader)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.OMModules.ReadOpenAlertsModule..ctor(ModuleHost`1 moduleHost, XmlReader configurationReader, Byte[] previousState)
Microsoft.SystemCenter.TfsWISync.SyncWorkItems.Rule
TFS Work Item Synchronisation ServerName
{EC924637-2725-7C94-8F37-013B657F4530}
Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.OMModules.ReadAlertsSyncModule
System.Xml.XmlException: Fin de fichier inattendue. Les éléments suivants ne sont pas fermés : Source, Link. Ligne 1, position 65537.
   à System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
   à System.Xml.XmlTextReaderImpl.ParseElementContent()
   à System.Xml.XmlReader.ReadString()
   à System.Xml.XmlReader.ReadElementString(String name)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.Common.DataItems.Links.DeserializeInternal(XmlReader reader)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.Common.DataItems.Links.Deserialize(String mappings)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.OMModules.ReadAlertsSyncModule.InitializeConfiguration(XmlReader reader)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.OMModules.ReadAlertsSyncModule..ctor(ModuleHost`1 moduleHost, XmlReader configurationReader, Byte[] previousState)
According to you, is there a possible incompatibility of the synchronization system with French environments?
Thanks for your help.
Gregory OTT => http://twitter.com/gregory_ott
ALM Engineer at Tekigo => www.tekigo.com

Hi,
To monitor the complete TFS infrastructure, you need additional monitoring packs that alert you about a wide range of problems with TFS components. When you import the TFS Work Item Synchronization management pack, it is a best practice to
also import and configure these monitoring packs, you can double check these:
Monitoring Integration between Operations Manager and TFS in System Center 2012 SP1
http://technet.microsoft.com/en-us/library/jj899893.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

"Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct". Performance Point Dashboard Designer (SP 2013), SSRS 2012 Report.

Hello Everybody,
I am using Sharepoint server 2013 , SQL Server 2012 SP1, PerfomancePoint and Reporting Services in SharePoint integrated mode.
I built one report in SSDTusing an Analysis Services Cube. This report has 3 parameters. So the idea is use Dashboard Designer to use this SSRS Report and connect it with some PP Filters.
The issue is that I am always obtaining "Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have the following settings in the PP Report:
Server Mode: SharePoint Integrated
SharePoint Site: http://MySharrepointSite:PortNumber/sites/bicenter
Document library : Documents (selected from drop down, my report is deployed to document library)
Report : report.rdl
When I select the report from drop down list its giving the error in a pop up message box as "Unable
to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have tried to use the most simple report, only with one parameter, but is always displaying the error above.
When I open the report directly from documents library its working fine and even it is working fine (
when I deployed the report) but the issue is parameters are not showing.
Any idea? Please help.
Thanks in Advance.

"Unable to connect to the server at CALYSTO\ReportService.
Hello Tom,
It should be "ReportServer" in the URL, not "ReportService".
In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Oracle 11g Server Installation and Configuration

Hi All..
I would like to know the estimate(in detail) for Oracle 11g Server Installation and Configuration.
This is for a server and we might even need to replicate the entire DB.
Can any on please help me out in this .
Thank you

Hi,
Please post your question in the [Database |http://forums.oracle.com/forums/category.jspa?categoryID=18] forum.
Regards,
Hussein

Verifying Server Connection in Configuration Manager

I am trying to deploy ES3 on Weblogic 10.3.6 and am having a problem with Configuration Manager. When I Verify Server Connection, the CM spins for a bit then comes back with a ALC-LCM-100-011 error, Cannot Connect to Application Server.
In the CM log there is this:
com.adobe.livecycle.cdv.CDVInternalException[ALC-LCM-100-011]: Cannot connect to application server.
Application server host or port may be invalid.
Caused by: java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic.management.mbeanservers'
I know the info is correct, in fact when I intentionally use a wrong password or account the CM immediately returns that the info is wrong.
My WL architecture has a WL domain with distributed development and staging managed servers (no clusters). The Admin server is standalone, as are the two managed servers. I am attempting to install on one of the managed servers.
Any hints here? Thanks!

See the link http://help.adobe.com/en_US/livecycle/10.0/PrepareInstallSingle/WS624e3cba99b79e1229e967b2 12eea97f932-7ffe.html . It has the below text :-
Two primary startup scenarios are available for WebLogic:
Using Node Manager and configuring through the Administration Server (recommended)
Directly starting the Managed Servers with configurations in the StartManagedWebLogic scripts
To use the automatic configuration features of Configuration Manager (the recommended option), you must use the Node Manager and configure through the Administration Server.
If you are directly starting the Managed Servers, you can still use the automatic configuration features of Configuration Manager. However, you must manually enter the Configuration Manager changes into the StartManagedWebLogic scripts. For the appropriate steps, see Installing and Deploying LiveCycle for WebLogic .
I think, if you want to use configuration manager for authomatically configuring the managed servers, you have to supply the admin server port while verifying the connection for weblogic server.

Version and Configuration Management in Oracle Portal

Hello ...
How is version and configuration management applied to real-life, large Oracle Portal applications, where e. g. both development, test, and production environments are used?
The build-in version management in Oracle Portal is inadequate for such environments.
Any suggestions, opinions, ... on this matter would be highly appreciated.
Regards,
Poul

In my opinion, Portal has a lot of work to do in terms of configuration and change management. If you are using Portal as an application platform, as opposed to KM, you are better of developing java portlets, so that you can use the SCM with JDeveloper and stay away from the application components. If you do want to use the components, then application export/import is the only way. You can setup your own procedures for handling the exported files (version etc).
You don't really version KM apps. Content is meant to be posted and otherwise administered by content area admins and users. It is not a "application", that must be change managed. There are versioning features available at the item level, which is adequate (but by no means a complete versioning system. Use iFS if you want that).
I have heard quite a few horror stories about exporting and importing content areas.
A 3-system Portal landscape, in my opinon, is overkill and trying to fit an existing approach to a new tool. A test/dev and a production Portal might be more palatable to the IT budget.
My 2.5 cents

InDesign Server Installation and Configuration Guide

Hi everybody
I try to ask one silly Q.
Where can I get this document.
I found many references but no link :(

There is no document titled "InDesign Server Installation and Configuration Guide". This was an error in the CS2 version of Introduction to InDesign Server.
You'll find the CS2 version of Introduction to InDesign Server in the InDesign Server CS2 ESD (the server download bundle). Even better you'll find the CS3 version in the InDesign CS3 Server SDK. Available at the following URL:
http://www.adobe.com/devnet/indesign/
The information about Java/CORBA is specific to CS3, but the information about scripting and SOAP applies to CS2.
Let me know if that helps, or you still need something else.
Regards,
Heath Lynn
Developer Technologies
Adobe Systems

Managing and configuring log files for Oracle 9ias

Hi all,
I'm wondering where I can find documentation on managing and configuring log files like:
ORACLE_HOME/admin/ sid/*dump/* ORACLE_HOME/assistants/opca/install.log ORACLE_HOME/webcache/logs/*
ORACLE_HOME/dcm/logs/*
ORACLE_HOME/ldap/log/*
ORACLE_HOME/opmn/logs/*
ORACLE_HOME/sysman/log/*
ORACLE_HOME/j2ee/ OC4J_instance/log/*/* ORACLE_HOME/config/schemaload.log ORACLE_HOME/config/useinfratool.log
because I didn't find anything in document like:
Oracle9 i Application Server
Administrator�s Guide
Release 2 (9.0.2)
May 2002
Part No. A92171-02
So, if anyone has any idea...
Thanks in advance

Does anyone know how or if it is possible to send the stdout and/or stderr to the log4j type of logging? I already capture the stdout and stderr to the flat file. But I would like to timestamp every line to compare and diagnose problems with each application that encounters problems. Each web app is using log4j to their own application log4j log file. When they encounter errors or resource draining problems, I would like to see the container logs and see what was occuring inside the container at around that same time.
Any ideas?

Integration Services 2012 - Parameters and configuration management

Our organization has implemented the project deployment model and it works great! It helps has helped us standardize deployment and configuration management. The big plus for us is the fact that we can now run reports on all SSIS
package configurations. There is one challenge though that we have come across. We haven’t found a good way to reuse the same ssis package while passing different parameters from different jobs and still be able to keep the configured parameter
values for each job documented in SSIDB; if you configure each job to pass different parameter values to the same package, the parameters are actually saved under the the job step’s command. The challenge is that there isn’t a clean way to retrieve
those parameters from msdb, unless someone out there has been able to? We need to retrieve the configured values to be able to build a report on all jobs and packages which contain all configured values. This makes our jobs easier when troubleshooting
a problem.
The only work around we have found is to simply create two different packages, one for each job. I have a problem with not being able to reuse a package from a conceptual stand point. I am sure there is someone out there that has come up with a
good solution. Can you please share it?
thank you,
Juan.

If I understand you correctly, you may be able to get what you want from catalog.execution_parameter_values catalog view
http://technet.microsoft.com/en-us/library/ff878152.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

BizTalk artifact versioning and configuration management

My customer is asking me to give us the 'BizTalk artifact versioning and configuration management' document.it should contain's recommended strategy
/ approach to version control of messages / schemas / artifacts ,handle multiple messages version to handle or avoid changes to interfaces etc.Please let
me know if any one having such a document with you.
Please help what kind of TOC should in the above document should contain and share if anydody having similar kind of doc ASAP

Hi,
Here are few good articles which can help you creating the document:
Dynamic BizTalk Versioning Strategy with Cruise Control
Versioning Strategy for
BizTalk Assemblies
Implementing
a Versioning Strategy
Best
Practices for Updating Applications
Upgrading
and Versioning Strategies for Applications
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

OSD: setup windows and configuration manager

Hi,
Please advise on setup Windows and configuration manager in SCCM 2012 task sequence.
I have SMSCachesize=8000 then space SMSMP=ourserver.domain.com then space FSP=ourserver.domain.com
Just want to verify this is correct. Settings are not one beneith the other. I can do that but if you make the screen of task sequence bigger, settings shuffle
Please advise.
J.
Jan Hoedt

To add multiple parameters you add Space, that is how it works. For more info you can visit:
http://technet.microsoft.com/en-us/library/hh846237.aspx#BKMK_SetupWindowsandConfigMgr
http://technet.microsoft.com/en-us/library/048dbf2d-5132-4fc0-ad8a-d90322b6db96#BKMK_CCMSetupCommandLine
Regards, Manohar Pusala

Config Manager and Operations Manager on same server

May be a simple question, but I have Systems Center Configuration Manager 2012 R2 setup on my Windows Server 2012 R2. I have the SQL 2012 database running on the same server. I'd like to install Operations Manager console/database on the same
server. Can these co-exist on the same machine/database? I found the article from Microsoft (http://technet.microsoft.com/en-us/library/dn281928.aspx) that explicitly says:
DPM Management Server
Operations Manager Management Server
Service Manager Management Server
Service Manager Data Warehouse Management Server
cannot co-exist on the same server, but it does not mention Configuration manager so I'm assuming its OK? Does anyone know for sure?

Hi,
Sccm requires a separate sql instance, Cameron covers the topic here:http://blogs.catapultsystems.com/cfuller/archive/2012/05/23/system-center-2012%E2%80%93using-a-common-sql-backend-database-sysctr-scom-scsm.aspx
From a performance and complexity perspective I would strongly advice you to avoid it.
/Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

BAM Connection in 12C - Failed to establish a connection to localhost at port 7004.Please verify the Bam server host and JNDI port.

Hi,
BAM server is running on 7004 in our local system.
We need o connect to BAM server from OSB service.
We tried to use the BAM adapter in the pipeline in 12c, We received Failed to establish a connection to localhost at port 7004.Please verify the Bam server host and JNDI port.
Please let us know the resolution to this issue.
Also please provide some links/steps to connect from OSB service to BAM server in 12c.
Thanks,

In BAM 12c, you can send data via JMS by configuring an EMS in BAM using the "self-described" payload. Make sure the date formats match correctly. You can configure an error queue which will show you any data parsing problems.
For example,
<msgRoot dataObjectName="Student" operationType="insert" keys="RequestId">
   <RequestId>R1000</RequestId>
   <StudentId>S12345</StudentId>
   <RequestType>Admission</RequestType>
   <RequestStatus>Open</RequestStatus>
   <RequestMessage>Please Admin</RequestMessage>
   <RequestCode>3</RequestCode>
   <SubmitTime>2015-03-17 18:23:07</SubmitTime>
   <ApprovalTime>2015-02-18 18:23:07</ApprovalTime>
</msgRoot>

Please clarify license about server managed and configuration manager client ML system center 2012

Similar Messages

Maybe you are looking for