Please clear my following doubt regarding TR (customizing / work bench).

Dear experts,
Greetings,
Please clear my following doubt regarding TR (customizing / work bench).
TR can be created for Either its customizing or work bench ?
Both need to release in order to get it in another client?
If different client are in one server, then in that case release is required or not. Or simply I can copy it using T.Code SCC1 in the target client.
Thanks & Regards,
M S Ansari

Hi,
Depends, are you using ChaRM? Then the TOC would suffice.
Please speak to BASIS person, he would provide you more insights.
Hope it Helps!
Thanks and Regards,
Varshal Kachole

Similar Messages

I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the thief logs out of iCloud. Would we able to locate the macbook?

I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the person who has stolen my macbook logs out of iCloud.
It should work fine for iPhone/iPad because we can enable "Restrictions" to prevent the user from signing out of iCloud. Do we have simialr settings for the macbook?
Thanks,

If it's not on the device list, it indicates that someone has gone to Find My iPhone on icloud.com and manually deleted it from the device list (as explained here: http://help.apple.com/icloud/#mmfc0eeddd), and it has not gone back online since (which would cause it to reappear on the device list; Find My iPhone has been turned of in settings on the device; the iClolud account has been deleted from the device; or the entire devices has been erased and restored.
Unfortunately, there's no other way to track the phone other than through Find My iPhone. You could call your carrier and see if they would blackliste it so at least the theif couldn't use it.

Plz clear the doubt regarding Currrent indicator value in   cluster RT

Hi Gurus,
Current Indicator in RT table have the values as A and P. So as payroll is run in the month Feb and retro run for Jan also. There are two result in RT with the Current Indicator A(Feb) and P(Jan retro) OR both have the same indicator as A and P for the previous Payroll RUN...
Please clear this ..
Regards
LAKHAN

HI Srinivasarao,
Thanks for the reply.
I am still a little bit confused ..AS there in T-code PC_PAYRESULT (for cluster data display) :
Payroll is run for Feb.2008
SEQNR     FPPER     FPBEG            FPEND             INPER       IPEND                  SRTZA
61       200710     20080101     20080131     200710     20080131          P
62       200710     20080101     20080131     200711     20080229          A
63       200711     20080201     20080229     200711     20080229          A
The Last Two row show the payroll results for the Feb.2008 wih the A indicator.
Is this corrrect
OR the below rows are correct(AS i have understand from your reply)
62       200710     20080101     20080131     200711     20080229          P
63       200711     20080201     20080229     200711     20080229          A
Please clear my doubt
Regards
lakhan

Doubts regarding ABAP

Dear friends,
Good Morning....
Clear the following doubts...
1. Can we do Background job in LSMW?
2. BDC is ONLINE PROGRAM or OFFLINE PROGRAM?
3. Can we perform multiple transactions with CALL TRANSACTION?
Appriciate your valuable answers...
Regards,
SK

Hi,
CALL TRANSACTION will intrupt the current program and leave to a different program and start onemore internal session. Once that session is over that is that program is over then it returns to the calling program. So you can CALL as many transaction as you want in your calling program. Unless you do a LEAVE TO transaction your calling program is still alive and you always return to it.
Regards,
Sesh

GR/IR clears the following documents

Hi Guys,
What do we mean by
GR/IR Clears the following Documents
GL Document
Customer Documents
Vendor Documents .
GR/IR is a clearing account but how does it clear the above documents.
thanks in advance..
srikanth

hi srikanth,
GR means Goods reacived but u did not received the invoice.
IR means u received the incoice
At these two cetivation no accouts will be clear
but Inventory A.C ,GR IR A.c,Vendor master Records will be update.
When the Payment will u do then only That A.C's will be clear

Doubts regarding reverse proxy in DMZ

Hi,
We are going to implement DMZ in a test environment following the metalink note:287176.1.
We have two sun servers so we have chosen Section 2.2(Fig 4) of 287176.1 as our deployment architecture.
The steps we are going to follow are:
1.Install Oracle Applications 11.5.10.2 in internal server.
2.Clone the application to external server.
3.Open the following ports:
80,443 in the external firewall and 1521 in the data firewall.
4.Follow steps from section 5.1,5.2,5.3,5.4 of 287176.1.
5.Configure the URL firewal specific to the product that we want to expose for external use.
Can someone please validate the above steps.
Also please clarify the following doubts:
1.Do we need a seperate external URL and domain to access the application from internet??
If yes then this domain and URL mapping is done in which configuration file??
2.Do we need to set up a reverse proxy server also for this architecture?If yes then is it necessary to deploy another reverse proxy server in front of external web server?
Cant we configure the external web tier itself as reverse proxy??
If yes then,how do we do it using 9iAS shipped with EBS...as we dont want to use standalone Apache for this and the document 287176.1 describes the steps to use a standalone Apache in section.(.Appendix D)..
Please help...
We have been given a time frame and limited resources to implement this POC.So a response is highly appreciated..
Thanks
ex:External URL:

We have two sun servers so we have chosen Section 2.2(Fig 4) of 287176.1 as our deployment architecture.If you chose the above configuration there is no reverse proxy setup.
1.Do we need a seperate external URL and domain to access the application >>from internet?? If yes then this domain and URL mapping is done in which >>configuration file??The changes are done on the external web tier in the application context file. (s_webentryhost - set to DMZ host name
s_webentrydomain - domain name of DMZ host
s_active_webport - port where the host will listen to requests
s_webentyurlprotocol - http or https according to your configuration
s_login_page - http(s)://webentypoint:webentrydomain:activewebport )
2.Do we need to set up a reverse proxy server also for this architecture?Again section 2.2 does not require a reverse proxy only external webhost
Please remember that the external host in DMZ runs only webtier. All the other services should be disabled.
If yes then,how do we do it using 9iAS shipped with EBSClone the AppsTier to external host. Edit the context file and disable all the processes except
<oa_process_status oa_var="s_apcstatus">enabled</oa_process_status>
Then you have a webtier running without standalone Apache.
I have recently finished configuring this setup.
Message was edited by:
bhetaal

Some doubts regarding sorcing cockpit in EBP

Hi all,
This is sankar bhatta , working in IBM . I am new to the EBP module. I got few doubts regarding the sourcing cockpit.
When a shopping cart comes to the sourcing cockpit of the purchaser. I mean in what cases??
i am listing some of the cases where i have doubts.
1) A user creates a SC , but he doesn't assign any vendors. in that case it comes to the sourcing cockpit of the Purchase . is it right??
2)A user created a shopping cart ( with more than one item) without vendor and it has gone to SOCO of purchaser . he has assigned the vendor and orders it. the PO is created in the Backend. now because of some reason ( for example the vendor is not able to supply the item ) the purchase deletes one item from the PO in EB. In this case is the SC comes again to SOCO of the Purchaser???
3) the user created the SC without vendor.The SC goes to the SOCO of the purchaser. The SC is in approval process. Now the user deletes one item and orders it again. In this case whether the SC goes to the SOCO again???
4) User created a SC ( with more than one item) and approval is over. PO is created in the backend. Now, if the user or somebody who has the authorisation deletes the item in SC , does the SC goes to the SOCO of the purchaser??
5)According to SAp standard functionallity, PO can be deleted only by one in purcasing organisation. Is this person person csn be a purchaser (or) some other person in the Purchasing organisation??
Please answer these questions and if you know any other case where a SC comes to the SOCO of the Purcher please include that also.
Thanks and regards
Sankar Rao Bhatta.

Hi Sankara,
The Sourcing cockpit is much more simple than that. Your questions show you'rre very confused in this.
There is only one customizing point used : SAP Reference IMG -> SAP Implementation Guide -> Supplier Relationship Management -> SRM Server -> Sourcing -> Define Sourcing for Product Categories
If Sourcing for Product Categories is not configured, the system creates purchase orders in the local scenario for all requirements; these are incomplete if the source of supply is missing. If you require additional control options, for example, the facility to control processing at product level, you can use the following BAdI: Define Execution of Sourcing.
The diferent options you have in the customizing point are:
-Sourcing is never carried out: This is the default setting. Enterprise Buyer does not transfer any items to the purchaser's sourcing application ¨C independent of the status of the shopping cart.
-Sourcing is always carried out: Enterprise Buyer transfers each item to Sourcing ¨C independent of the status of the shopping cart.
-Sourcing is carried out for items without a source of supply: Enterprise Buyer transfers all requirements that have multiple sources of supply of which none is assigned, or if there is no source of supply for the requirement, to Sourcing.
-Automatic requirement grouping; sourcing for items without assigned source of supply:
If a source of supply is assigned to a requirement, the report BBP_SC_TRANSFER_GROUPED automatically groups requirements together for the creation of a PO. If the requirement does not have a source of supply, it appears in the work list of the sourcing application for manual assignment. Once you have assigned a source of supply, you can submit the requirement to the report.
-Automatic grouping; sourcing is never carried out: If a source of supply is assigned to a requirement, the report BBP_SC_TRANSFER_GROUPED automatically groups requirements together for the creation of a PO. If the requirement does not have a source of supply, an incomplete PO is created.
-Automatic bid invitation for items without a source of supply: Enterprise Buyer creates a bid invitation for all requirements that do not have any source of supply.
So for your questions:
1)depending on your customizing, this SC will lead to:
-Backend PR (classic scenario)
-Local incomplete PO (standalone or extended classic without soircing)
-Requirement in the Sourcing cockpit (if customized)
2)The modification of a PO will never change the initial document (SC and/or requirement), nothing 'comes back' into the sourcing cockpit
3)If you customized the sourcink cockpit, the SC line goes into it only after the approval process
4)This has nothing to do with the sourcing cockpit
5)The POs can be deleted by people who have correct authorizations (that is purchasers of the document purch. org. in standard). Be careful the POs cannot be deleted as soon as they have been edited (as of R/3).
Regards.
Vadim
PS: Please don't forget to reward points for helpful answers on your threads.

Doubts regarding CUBE

Hi all
I have some doubts regarding CUBE . If i get sip trunking from a service provider and i use a CUBE router to distribute those sip trunk to customers who are using IP pbx for there ip phones to connect .
As i know CUBE helps in ip to ip communication so does in this scenario i need a cucm anywhere ?
or a cme router ?
i got to know that i need a dsp resource in cube router so to avoid any mismatch of codecs.
Please guide me to clear my basics or you can provide me with any document to read.
Regards
Aateek

Hi Aateek,
You can start by checking the following links
http://docwiki.cisco.com/wiki/Cisco_Unified_Border_Element_SIP_Trunk_Configuration_Example
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-border-element/white_paper_c11-620461.html
HTH
Manish

Doubt regarding ALE SETTINGS in IDOC scenario.

Hi Friends,
        I have some doubts regarding ALE settings for IDOC scenarios, can anyone please clarify my doubts.
For exmaple take IDOC to FILE scenario
The knowledge i got from SDN is --
One need to do at the R3 side is --- RFC DESTINATION (SM59) for the XI system.
                                                   --- TRFC PORT for sending IDOC to the XI system
                                                   --- CREATING LOGICAL SYSTEM
                                                   --- CREATING PARTNER PROFILE
               at the XI side is --- RFC Destination ( For SAP sender system)
                                       --- CREATING PORT for receiving IDOC from the SAP sending system(IDX1).
1. Do we create two logical systems for both Sender ( R3 system ) and Receiver( XI system ) in R3 system itself or in XI system or in both systems we create these logical systems? Is this a mandatory step in doing ALE configurations?
In IDOC to IDOC scenario-------
2. Do we craete two RFC destinations in XI system? One RFC DESTINATION for the Sender R3 system and another RFC DESTINATION for the Receiver R3 System? and do we create RFC DESTINATION for the XI system in receiver R3 system? If not.....y we don't create like this........Please give me some clarity on this.............
3. If we use IDOC adapter ,since IDOC adapter resides on the ABAP STACK ,we don't need sender communication channel ,for the similar reason----
y we r creating receiver communication channel in the case of FILE to IDOC scenario?
4. Can any one please provide me the ALE settings for IDOC to FILE scenario,
                                                                                FILE to IDOC scenario,
IDOC to IDOC scenario individually.
Thanks in advance.
Regards,
Ramana.

hi,
1. Yes, we create two logical systems for both Sender ( R3 system ) and Receiver( XI system ) in R3 system itself and
it is a mandatory step in doing ALE configurations
2. We create 1 RFC destination each in R3 and XI.
    R3 RFC destination points to Xi and
    XI RFC destination points to R3
3 We need to create Communication Channel for Idoc receiver as the receiver channel is always required but sender may not be necessary
4. ALE settings for all IDOC scenarios are same as follows....
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
Reward points if helpful
Prashant

Doubts regarding XML Form Builder

Hi All,
I am having some doubts regarding XML Forms (Projects) that is created using XML Form Builder. Where are exactly these projects stored. Can I edit these projects and add my own Java Functionality in these. And also the data which I fill using these project where is it stored. Suppose New Project I ve created using XML Form Builder, now I want to feed in the news. Where exactly are these news stored.
Thanks in Advance
Anish

Hi Anish
You can make the standard settings and modify the XML forms builder in line with your requirements in the options. You can set the standard paths for your project on the <b>Paths</b> tab page.
To get a clear understanding, please go through this link.
http://help.sap.com/saphelp_erp2004/helpdata/en/62/ca6f365a6df84e87ba085f9b5fb350/content.htm
Hope that was helpful
Warm Regards
Priya

Have some doubt regarding the weblog (Lookup's in XI made simpler)

Hi All,
I have created the same scenario as mentioned in Siva's weblog (Lookup's in XI made simpler).
I having some doubts regarding the scenario, it will be great if you help me to resolve the same.
I am having a file-file scenario where I need to do lookup in database(MS-Access) through mapping.
The standard file-file scenario is in place and in addition I have created a receiver jdbc channel . I have also created the receiver agreement for the same in the cofiguration.
While creating the receiver agreement you have to specify the interface name which includes the message typeI have specified the normal format which we specify while configuring the jdbc receiver adapter.
In the message mapping I have created a advance user defined function as mentioned in your weblog which calls my receiver jdbc channel.
I have also specified the select query to be executed in the mapping program.
While testing I am getting the following error
Cannot produce target element /ns0:Role_MT/URole. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
<b>Can you please suggest me what all I need to do in addition to the file-file scenario for this lookup scenario to work.</b>
Thanks and Regards
Rahul

Hi,
Following is my user defined function
//write your code here
String Query = "";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
Query = "Select URole from Lookup where UName = ' " + UName[0] + " ' and UPassword = ' " + Pwd[0] +" ' ";
try{
channel = LookupService.getChannel("DB_service","JDBC_channel_receiver");
accessor = LookupService.getDataBaseAccessor(channel);
resultSet = accessor.execute(Query);
for(Iterator rows = resultSet.getRows();rows.hasNext();){
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("URole"));
catch(Exception ex){
result.addValue(ex.getMessage());
finally{
try{
if (accessor!= null) accessor.close();
catch(Exception ex){
result.addValue(ex.getMessage());
Thanks and Regards
Rahul

Doubt regarding SQL execution

Hi Friends,
Am using Oracle 10g DB - 10.2.0.3.0
I have some basic doubts regarding sql query execution by Oracle.
Say, Am executing a query from a toad/sqlplus session for the first time, it takes 10 secs then 1 sec and so on.
Same thing happens for every 15 minutes.(Any specific reason for this ??).
It takes more time when it executes first because of parsing and all those stuff but from then on it picks from the
shared pool right??.. How long will it be there in Shared Pool does Oracle maintain any specific time period to clear that query from shared pool memory. How does Oracle handle this.
Another thing is, say, I have a report query, I run this query monthly. What will be the execution time when I run this query each and every month. Will Oracle parse this query everytime I run. How do I improve the performance in this situation (May sound odd :)).
Regards,
Marlon

Say, Am executing a query from a toad/sqlplus session for the first time, it takes 10 secs then 1 sec and so on.
Same thing happens for every 15 minutes.(Any specific reason for this ??).
It takes more time when it executes first because of parsing and all those stuff but from then on it picks from the
shared pool right??.. How long will it be there in Shared Pool does Oracle maintain any specific time period to clear that query from shared pool memory. How does Oracle handle this. Share Pool caches the SQL statement. So when you execute the same SQL for the second time it goes for a soft parse. But this is not the only reason for the query to execute faster the second time. The time difference between a soft parse and hard parse is very minimal. So it really does not matter unless you are executing the same query several number of times.
The thing that really matters is the Data Buffer Cache. That is the rows that are selected by your query are cached into the Data buffer that is available in the SGA. So for the next time when you run the same query the IO is reduced as the data is available in the memory and you don't have to go to your disk to get the data.
But the data in Data Buffer is not persistent, meaning it follows the FIFO rule. That is first in first out. When the Data Buffer is full the content of the buffer is removed in the FIFO order.
Another thing is, say, I have a report query, I run this query monthly. What will be the execution time when I run this query each and every month. Will Oracle parse this query every time I run. How do I improve the performance in this situation (May sound odd :)). Like the Data Buffer the Shared Pool is also maintained in the FIFO order. So if the query is still in the Shared Pool the query will be soft parsed else it will be hard parsed. But its very rare that you will have a query in your Shared Pool for a month.

Doubts regarding WAN Network sizing formula parameters

Hi
We have used the following SAP document - Front end requirements for SAP Business solutions
We have some doubts regarding the formula. Sometime we have the feeling it does not address very well issues as user's concurrency, WAN Optimization and contingency. However, it might be only that we are not using correctly the formula, so we would like to confirm some information regarding the parameters.
C = X * N * D * 0.25
The parameters are as follows:
C: Bandwidth in kbps that is needed for the SAP GUI
X: Amount of data per dialog step in kilo bytes
N: Number of active users (independent of the number of sessions)
D: Average number of dialog steps per minute per user7
Numerical factor: ~0.25 = 8 (kb/kilo bytes ) * 1.25 (protocol overhead) * 1/60 (min/s) * safety factor
1.58 (response time, peak load, different technologies)
The number of active user is the average number of concurrent users (from the total number of users) which are using the network? Therefore, we should calculate first the concurrent users number?
Does any body knows what is the reasoning behind the Numerical Factor and the safety factor? It is a contingency factor? It is related with a network bandwidth contingency?
Has anyone apply WAN Optimization?
Has anyone apply any additional contingency measure additional to the safety factor?
Kind regards
Gonzalo Pérez-Prim

Hi Gonzalo,
As you said, the number of active users is the mean number of concurrent users, since idle users don't normally need bandwidth.
I think that safety factor is an estimated number provided by SAP engineers to increase the final amount, just in case you have different issues that could lead to a lower network transmission rate. As it's a general estimation, please take into account that the particular issues of your network can have some influence in the speed calculation.
Please take into account that maybe you want to switch the option "slow network connection" in SAPGUI, just to decrease the ammount of traffic between frontends and server.
Hope this helps
Best Regards
Francisco

Doubts regarding RRI

Hello Friends,
I have some doubts regarding RRI, please go through below questions.
I have 2 queries 1. sales report 2. Sales report world
I have built a jump target in RSBBS by giving sender and receiver details
In sales report I have the following data, my useer requirement is If he select one material -> right click -> goto -> jump to world report, then he wants to see the data for only that particular material , bu in my case it is showing for all the materials which are in 1st query.
Material--Dist Channel-Month
098647A639          G2     201002
098647A781          G2     200909
0265231927          G2     200901
0986479560          G2     200912
0204011474          G2     200912
098647A711          G2     201002
098647B772          G2     200909
0986473371          G2     200901
0265216627          G2     200901
1987482222          G2     200901
1987482202          G2     200901

Hi,
I have same requirement, I achieved by selecting go to on the respective company, Sales document (in my case). I have done no settings in assignment details.
I have another RRI requirement.
When we are in the report for Invoice, when we click on the Billing Document, It should go to transaction "VF03" in R/3.
I can able to achieve (we have SSO logon configured).
My requirement is when we select goto VF03, it should go to the respective billing document on which we right clicked, now i'ts displaying only VF03 transaction. It should display display of the respective Billing Document.
Can anyone help to resolve the issue?
Thanks in advance,
Venky

Doubt regarding SHDB transaction

Hi All,
            I have a doubt regarding the Process Tab in the application tool bar of SHDB transaction. What is the use of the following check boxes?
1)       Default Size
2)       Cont.after commit
3)      not a batch input session
4)      END: Not a Batch Input session
5)      Simulate Background mode

Hi,
Basically these are the properties for CALL TRANSACTION using. You need not worry about these unless you really need those.
1) Default Size: it will set the Default screen size for CALL TRANSACTION USING...
2) Cont.after commit : it will set indicator that CALL TRANSACTION USING... is not completed by COMMIT. after commit also the process will continue
3) not a batch input session: sets indicator that present session is not batch input
4) END: Not a Batch Input session
5) Simulate Background mode : session will be run in foreground. but similar to back grpund
you can see the documentation by placing the cursor on these and click f1.

Please clear my following doubt regarding TR (customizing / work bench).

Similar Messages

Maybe you are looking for