Please Convert tktds5xx from LabView 2012 to LabView 2011.

I was directed here to have an instrument driver converted from LabView 2012 to LabView 2011.
Thanks in advance!
Solved!
Go to Solution.
Attachments:
tktds5xx.zip ‏777 KB

Here you go.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Attachments:
tktds5xx.zip ‏529 KB

Similar Messages

  • Convert TCPIP_Nagle_algorithm.zip from LabVIEW 2012 to LabVIEW 2011

    Hello,
    can somebody convert the VIs in the zip file from LabVIEW 2012 to LabVIEW 2011 please. I need them to study.
    Thank you very much for your support.
    Solved!
    Go to Solution.
    Attachments:
    TCPIP_Nagle_algorithm.zip ‏63 KB

    Additionally I am sorry that I have put my post in LabVIEW and not under Version Conversion

  • Convert VIs LabVIEW 2012 to LabVIEW 2009

    Hi all, 
    Need help to convert VIs attached below (LabVIEW 2012) to LabVIEW 2009.
    Thank you very much 
    Attachments:
    EMG Analysis.vi ‏1670 KB

    You didn't enclude the sub.vis and these issues are usually addressed on the version conversion board (see the floating link at the top on the board) but here is your vi.  Broken since it is missing depanancies
    Jeff
    Attachments:
    EMG Analysis.vi ‏842 KB

  • Please Convert Vis from Labview 2013 to Labview 2011

    Please convert the attached Vis from Labview 2013 to Labview 2011
    Solved!
    Go to Solution.
    Attachments:
    Convert from2013 to 2011.zip ‏255 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Attachments:
    Converted to 2011.zip ‏176 KB

  • Convert LabVIEW 2012 to LabVIEW 2011

    Hi all,
    Can anybody convert the attached zip folder  to LV 2011.
    Thanks in advance.
    Regards,
    KM
    Attachments:
    stereo.zip ‏284 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Attachments:
    stereo 2011.zip ‏197 KB

  • Bind FPGA host reference to type definition in labVIEW 2012 crashes labVIEW

    Hi,
    I am using FPGA target device 5641R and labview FPGA 2012 with 5640R ver 1.7.
    On the configure window of open FPGA VI reference function, choosing the dynmaic mode shows broken arrow when wired to the 5640R configuration VIs (i.e. Configure timebase, Configure ADC default, Configure ADC NCO functions). So i tried the other option which is binding the FPGA host reference to type definition and choose the control from path C:\Program Files\National Instruments\LabVIEW 2012\instr.lib\ni5640R\Configuration\NI-5640R VIs\ni5640R FPGA VI Reference.ctl. But after that when i try to save the VI on which open FPGA VI reference function is placed, labVIEW crashes. I am unable to figure out the reason. Earlier I was working with labVIEW 2011 and it was working fine there. Any suggestions would be highly appretiated. 
    Please see the attached images for more details.
    Thanks
    Attachments:
    1.png ‏33 KB
    2.png ‏71 KB
    3.png ‏40 KB

    Check out this thread.  It looks like someone else ran into a similar issue and made changes that fixed their application.
    http://forums.ni.com/t5/IF-RIO/correct-5640r-template-use-recommendation/td-p/1331918
    Jeff B.
    Applications Engineer
    National Instruments

  • Can someone please convert the Tektronix AFG3022 driver to LabView 7.0

    Hey, I need a AFG3200 driver for LabView 7.0. The driver page only has drivers for 7.1 or above.
    Solved!
    Go to Solution.

    just a hint. Post the code or at least give a link. People do not understand what you want to do now
    Ps sorry I can not help you. I have 7.0 and 8.6 only
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • Convert Instrument drive LabVIEW 2012 to LabVIEW 2009

    Hi . now we user Ver. 2009 and we need to use Instrument driver (support  at Ver.2012)
     How we can do?
     http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=24352

    down load file .
    Attachments:
    espec_climatic_chamber.zip ‏1121 KB

  • Conversion from LabVIEW 2012 to 8.2

    Dear All
    Can any body help me to convert the attached file from LabVIEW 2012 to LabVIEW 8.2. Please send the file in doc or pdf as well.
    Kind Regards
    Muhammad Irfan
    Solved!
    Go to Solution.
    Attachments:
    PVT - Mathscript Node.vi ‏83 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    PVT - Mathscript Node.vi ‏90 KB

  • LabVIEW 2012 and LegoNXT

    Hi,
    Will my EV3 Lego mindstorm brick work with LabVIEW 2012 and LabVIEW Lego MindstormNXT 2012? Because when I'm installing LabVIEW module for Lego 2012, it'sprompting me to install LV2012 SP1. I already have LV2012 but NOT SP1. 
    Regards.

    NapDynamite wrote:
    The system in my lab has no SP1, probably the guy over here never bothered to install that update. Now when I checked those updates to install SP1, the update service is locked for this patch and is asking for renewal of subscription.
    My boss, who is not very cognizant of software stuff, is now asking me to use the EV3 software which comes along with LEGO pack becuase he's not ready to spend much to renew.
    And my dream of teaching LabVIEW to school kids is now in vain.
    Regards. 
    In vain?
    A bit dramatic isn't it?
    One license is $99.
    Site license is $570.
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/210666

  • Please Convert from LabView 2013 to 2011

    Hello, Could someone please convert these VIs from LV13 to 11 please?
    Thanks, 
    Laura
    Solved!
    Go to Solution.
    Attachments:
    Syringe Pumps New.zip ‏953 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Syringe Pumps New.zip ‏364 KB

  • I can't convert .vi from labview 5.0 to 8.6

    I'm tring to convert a labview project from 5.0 version to 8.6 version. I know that direct conversion is not possible. I saw at this link:
    http://zone.ni.com/devzone/cda/tut/p/id/8387
    that conversion is possible by intermediate comnversion with 8.0 version (I have it).
    Unlikely somethings wrong happen when I try to open my original labview 5.0 .vi with 8.0 version.
    Do someone know alternative version to convert my project????
    thanks in advance
    A.
    Attachments:
    scrivemoo.vi ‏116 KB

    albs wrote:
    this is strange because I open it without problems with labview 5.0. I try to attach it again
    thanks
    There is still a problem with that VI.  Are you sure it's written in LV 5.  I get the error which is shown below.  But PLEASE move this conversion to HERE
    Kind regards,
    - Bjorn -
    Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
    LabVIEW 5.1 - LabVIEW 2012

  • What files do I send to be upgraded from LabVIEW 5.1.1 to LabVIEW 2012?

    OK.  Just to be clear.  I am a complete newb to ANYTHING LabVIEW or LabWindows related.  I am a programmer, but I have never used any version ever.  That said, I am responsible for the upgrade process of getting our old LabVIEW 5.1.1 system up to date.  The old system (still running and doing it's job everyday), is an old Windows NT v4.0 SP6 system running LabVIEW 5.1.1.  You can just imagine how ancient this is by today's standard.
    Have I set the stage properly?  I hope so.  Newb, Ancient LabVIEW version 5.1.1, Windows NT 4.0, upgrading from 5.1.1 to 2012.
    Now here is what I "think" I know about what is required.  Because LabVIEW 2012 will not directly read in, process and /or compile LabVIEW 5.1.1 files, I must first open and save the files using an intermediate version of LabVIEW (specifically 8.2.1) to bring the files up to a version that 2012 can handle.  I have noticed in reading the Version Conversion forum, that I can attach a zip file of my LabVIEW files and one of the resident Gurus will convert it for me and give them back - quite nice I think.
    Now, I have what I think are all of the required LabVIEW vi and llb files that make up this system we have in place, but I want to be sure before I just post a bunch of stuff.  
    What exactly do I need to zip up and what can I leave out? 
    Are there LabVIEW vi and llb files in a "project" that are not needed? 
    Are there any setup/configuration/project specific files I need to include? 
    Are there any limitatations to this conversion process that I need to be concerned with - such as various toolkits/suites/modules that may have been used but are no longer supported?
    Secondly, I am not really comfortable with posting my vi and llb files for the world to see (and possibly use) as I am not the owner of said modules, just the user/future developer who will be responsible for insuring they stay up to date.  Is there any way I can send my files to a specific NI guru via email instead of just posting them?
    Solved!
    Go to Solution.

    So if I understand you correctly,  all I really need to do is to get LabVIEW 8.2.1, and update my .vi, .lib, and any .ctl files to that version.
    Is it a simple matter of just opening the files and hitting something like SAVE AS, or just SAVE and it will do this?  Once done, LabVIEW 2012 will then allow me to open them and do what I need to do?  Do I have to save them into LabVIEW 2012 first, or is that automatic when I try to recompile them?
    When I get a copy of LabVIEW 8.2.1 (eval version), do I have to get all of the pieces (modules, toolkits, etc.) in order to update the 5.1.1 files?  Based on what is installed on that NT v4.0 system, we have the following items installed:
    NI VISA
    NI ComponentWorks 3D Graph
    NI DataSocket
    NI LabVIEW 5.1.1 Advanced Analysis Library
    NI LabVIEW RTE 5.1.1
    NI LabVIEW v5.1.1
    NI Measurement and Auto Explorer 1.1
    NI-488 2.1.60
    NI-DAQ 6.6
    NI-PAL 1.3.110
    NI-Reports
    NI-VXI/VISA
    You mention DAQ.  Our program uses NI DAQ v6.6 now.  I have LabVIEW Developer 2012, so I just download the DAQ files for it and it will replace the NI DAQ v6.6 library files we use now? 
    Thanks for your help so far.  If we had a support contract in place, this wouldn't be an issue.  However, as I stated, I am not the owner of the files, just the currently assigned caretaker, and part of my task is to get from where we are now on this ancient hardware/software platform, to the latest and greatest.  However, I am specifically not allowed to just place the files on a public forum for all to see.  It just isn't done.  We can send them to a known location and a known entity, but not to just anyone/anywhere as a public forum is by its very nature.   
    I know there is nothing you guys can do if I cannot give you the files, but thanks for helping me to do it myself.    Getting an eval copy of 8.2.1, et. al is probably what I have to do here.

  • Upconversion the TestStand file from V5.1 to LabVIEW 2012

    Hi, please convert all the VI V5.1 files in the ZIP file to LabVIEW 2012, many thanks.
    Attachments:
    Teststand1582.zip ‏149 KB

    Mass compiled in 8.2.1, which you can open with 2012.
    I think you are missing your second attachment.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Teststand1582_mass compiled.zip ‏136 KB

  • Please convert to LabVIEW 6.1

    The attached VI is for LabVIEW 7.0 or higher. I have LabVIEW 6.1. Can anyone please convert it for me?
    Thanks, Arno
    Attachments:
    CalculateOffset_forforum[1].vi ‏139 KB

    The three subvi's (Cross Correlate, Mean, Peak Detect) could not be saved to previous version. I deleted these and saved the main to 6.1. You will have to insert the three subvi's from your 6.1 function palette.
    - tbob
    Inventor of the WORM Global
    Attachments:
    CalculateOffset_forforum%5B1%5D[1].vi ‏119 KB

Maybe you are looking for

  • (How do I/Can I) use this CD to install XP on my macbook?

    Here's the CD in question: http://img227.imageshack.us/img227/1971/dellcdhv0.jpg Do I need Microsoft Virtual PC? Do I need BootCamp? Will my Dell reinstallation CD even work? Any help would be appreciated... MacBook Pro   Mac OS X (10.4.7)  

  • Could not trade-in tablet ($50 minimum) at store 1453

    I have an HTC Evo View 4G (equivalent of the HTC Flyer) which store 1453 did not find in the trade-in database.  Due to that, I was told I could not trade in the device for the $50 minimum tablet trade-in gift card offer. Would it still be possible t

  • Theater 550 Pro's PowerCinema 4 take too much CPU resource?

    Hello all Theater 550 Pro users, I am experiencing Power Cinema 4 is taking too much CPU utilization on my PC, versus any other TV viewer apps like WinAmp TV, FlyTV, etc. CLCapSvc.exe is the process that blatantly taking most juice out of the CPU, ca

  • Wireless Router Help

    I recently moved this past week and I am trying to set up a wireless internet for my Macbook Pro.  At my old residence I could pick up the signal just fine, but at this new place, I can't seem to get AirPort to pick up a signal.  When I go into Netwo

  • The purpose of the Variable price column in KP26

    Hi, We are updating the time sheets from Non-Sap to  Sap. We are in need of entering the activity prices. We have given the planned activity in Kp26 and have run a price calculation in KSPI. When we run the KSPI, we get the fixed price column filled