Please describe the definitions and differences: Connection Event, Intrusion event.

Can someone please describe and provide a definition and the differences of a connection event and an intrusion event, as seen in Sourcefire's Defense Center..
Thank you,

Hello friends,
Please, allow me to resurect this old post. I have already installed CSM 4.4 and now I am able to manage an ASA. I have already configured according to the nex User Guide:
http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-4/user/guide/CSMUserGuide_wrapper/evntchap.html
I am not able to see the events in the Event Viewer client. Would any body suggest me how to troubleshoot this?
Regards!

Similar Messages

  • Has anyone successfully connected an AEBS to the new Panasonic TVs with built-in WiFi?  If so, please describe the requirements and process.  Thanks.

    Has anyone successfully connected an AEBS to the new Panasonic TVs with built-in WiFi?  If so, please describe the requirements and process.  (TV subscription is through DirecTV and ISP is TWC.)  Thanks.

    If you wish to use the cellular capabilities of a device, you will need a SIM (unless the carrier uses CDMA which doesn't use SIMs) and you will have to pay a cell carrier. No cell company provides service for free. The only way you will get free Internet is via WiFi to a free and open WiFi access point, as sometimes is offered in public buildings or by some businesses.
    Regards.

  • Please describe the directories and subdirectories and their use in .mozilla on linux

    In Linux, the Firefox profile is stored in the .mozilla directory. Under that are the extensions and firefox directories. But under firefox are the profiles directories, crash reports and extensions directories. There appears to be duplicates.
    Also, why isn't Thunderbird, a Mozilla app, also under .mozilla?
    Thank you.

    Fred this is on Linux, not Windows. Also how does that answer the question anyways.
    To actually answer the question, for Thunderbird on Linux it is '''.thunderbird''' if it is not in /.mozilla/thunderbird depending ion whether from mozilla.org or a package provided by Linux distro.
    https://support.mozilla.org/en-US/kb/profiles-tb
    And duplicates of what? as you can create multiple Profiles so there will be a folder for each Profile in .mozilla/firefox/

  • What are the pinouts of the SH68-68-EP cable (picture please) showing shielded pairs and shield connections.

    What are the pinouts of the SH68-68-EP cable (picture please) showing shielded pairs and shield connections.

    you can find the pinout in the manual of that product in which that cable used or for specific device for which sh68-68-ep built for.otherwise see differents catalogas on www.ni.com and search for this.
    thanks

  • Please describe the application's ability to integrate to ext master data

    Please describe the application's ability to integrate to external master data sources. For example: product, vendor, and customer.

    Hi,
    The difference is in the segments that each one includes, you can check it in transaction WE30 for example for
    the IDOC Type HRMD_A07 (which is linked to HRMD_A)vs. the IDOC type HRMD_ABA05 (which is linked to HRMD_ABA)
    The first one manages more record, therefore you can send more infotypes. This is because its manages all the standard OM information.
    The HRMD_ABA is more used if your destinatio is a CRM or SRM system which requires less data.
    Regards,

  • I noticed that any other code in my while loop only gets called at the 1st time through the loop and when a event is executed.

    HI there!
    I have a while loop, in which i am reading from/writing  to a compact rio. Furthermore, i added a event structure, its the 1st time i'm using it so i'm a bit lost at times.
    I have the event structure set up for all my button i want to trigger an event. However, i have some other code which i would also like to be executed, evebn though no event has been executed.
    I noticed that the other stuff in the loop only gets executed the 1st time through the loop and when an event is triggered.
    My question therefore is, how do i get the other stuff to execute as well?
    Please advise.
    Thanks.
    Regards,

    Put the other code in the timeout event case.  Wire some positive value to the timeout hourglass input.  That code will execute everytime a timeout occurs.  For instance, if you wire 100 into the timeout, the code in that case will execute every 100 mSec.
    - tbob
    Inventor of the WORM Global

  • The replication agent has not logged a progress message in 5 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber,

    Hello Everyone,
    Suddnly stop merge replication. transaction cannot replicated from publiser to sunscriber.
    I tried to set  heartbeat_interval= 5 but still not working..
    The replication agent has not logged a progress message in 5 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber, Publisher, and Distributor
    are still active.
    What is the problem with merge replication and why this erroe comes..
    any solution of this error or reconfigure merge replication?
    please give me a solution

    Run profiler on the subscriber to see what the merge agent is doing there. It is possible that there is some blocking that is causing the agent to hang. You might want to set the heartbeat to 10 or higher. The default is IIRC 5.
    looking for a book on SQL Server 2008 Administration?
    http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
    http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

  • Unable to load wsdl. if currently online please verify the uri and or format of the wsdl

    Hi,
    i have one aspx page in which i have embeded an swf object,
    which calls webservice to load data,
    it works fine on localhost,
    but when uploaded it gives the error no 2032 stream error ,
    i added the crossdomain.xml in the root project then that error was gone and found the following error,
    "unable to load wsdl. if currently online please verify the uri and or format of the wsdl"
    Can anybody help me with this?
    Any elp or suggestion will be appriciated.
    Thank You.
    Bhavika

    I had the same error message and I believe I added the -use-network=true to the additional compiler arguments to fix the problem.  The default value for this should be true.
    Sorry if this doesn't help...It's just a guess.

  • XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

    XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

    Is the error message displayed in Firefox or in IE, or in a customized window that doesn't identify the browser?
    ''If it displays in Firefox:''
    It's possible that the Troubleshooter doesn't work correctly unless IE is your default browser. You could test that possibility by having IE make itself the default and testing the Troubleshooter again.
    ''If it displays in IE or embedded in another Microsoft application:''
    In a web search I found these suggestions:
    (1) Reset your Internet Explorer settings, according to http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/cannot-view-xml-using-xsl-style-sheet/ccfe80c6-c0db-4594-a7e3-475f9eac0e85
    (2) Try the System File Checker, according to http://ask-leo.com/why_do_i_get_the_xml_page_cannot_be_displayed_after_running_a_microsoft_troubleshooter.html
    Any luck?

  • HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

    when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

  • Unable to find the report in the manifest resources. Please build the project, and try again.

    The error is received when i transfer the .exe file, bin\Debug folder to another machine:
    Unable to find the report in the manifest resources. Please build the project, and try again.
    The error is issued when i try to open the form that contain the Crystal report viewer, I already checked the properties of the report file and it says "Embed Resource" in the "Build Action"
    This error is not visible on my development machine where visual studio is installed, anybody know what i should install on the other machine for this to run.
    I'm using C#, WinForms, .net 2.0, VS 2005.

    Fronde Systems Group: 
    Setting the build action to Embedded resource  is working
    in my local machine which has Visual studio 2003 installed. But when i deploy the same on Server
    (server has no .net framework installed on it), it keeps failing. I get the the following error:
    "ERROR Thrown from Crystal Reports ===> An undocumented error occured" which is triggered when it is Unable
    to find the report in the manifest resources.
    Please suggest me guys.... 
    Thanks
    Ravi
    [email protected]

  • An error occurred while sending mail. The mail server responded: Administrative prohibition. Please check the message and try again.

    An error occurred while sending mail. The mail server responded: Administrative prohibition. Please check the message and try again.
    Somtimes it says it spam also......

    The error message is being generated by your email provider's server. Best to ask them what they do not like about your messages and how to solve the problem.

  • Netflix keeps giving me the error: Whoops, something went wrong...  Unexpected Error  There was an unexpected error. Please reload the page and try again. Error Code: S7063-1417.

    Netflix keeps giving me the error: Whoops, something went wrong...  Unexpected Error  There was an unexpected error. Please reload the page and try again. Error Code: S7063-1417.

    This is what Netflix has to say:
    https://help.netflix.com/en/node/2417
    Ciao.

  • Cannot view XML input using XSL style sheet. Please correct the error and..

    Hi All,
    Scenario XML to IDOC.
    The interface determination decides whether to create IDOC X or IDOC Y based on a xml segment value.
    I have an error in the SXMB_MONI:
    <!--  Interface Determination
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
      <SAP:P1>Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160).</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when determining the inbound interface: Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: CL_SWF_RLS_COMPARISON=========CP, include: CL_SWF_RLS_COMPARISON=========CM002, line: 63). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: SAPMSSY1, include: , line: 0). Exception CX_SWF_EXP_EVALUATE occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM027, line: 38). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM01Z, line: 520). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SAI_SWF_RULE_ENGINE========CP, include: CL_SAI_SWF_RULE_ENGINE========CM00S, line: 42). Problem extracting values from the Payload: Check line 2 column 1 of the XML document</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    From the SXMB_MONI, the inbound message payload is truncated with an error:
    - <ProductIdentification>
      <GlobalProductIdentifier />
    - <PartnerProductIdentification>
    The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    The following tags were not closed: Pip3B12ShippingOrderConfirmation, ShippingOrder, ShipmentLineItem, isContainsHazardousMa...
    ">   <GlobalPartnerClassificationCode />
      <ProprietaryProductIdentifier>000000000000101369</ProprietaryProductIdentifier>
      </PartnerProductIdentification>
      </ProductIdentification>
    - <QuantityInformation>
    - <confirmedQuantity>
      <ProductQuantity>1.00</ProductQuantity>
      </confirmedQuantity>
    I've checked that the xml format is OK.
    As a matter of fact, if I try to resend the xml file from directory, the message is processed correctly and the payload shows all the xml file.
    Thanks.
    Daniele
    Edited by: Daniele*Verdone on Feb 1, 2010 11:22 AM
    Edited by: Daniele*Verdone on Feb 1, 2010 11:23 AM

    Hi Suraj,
    That option is not available in FTP mode..
    This option is applicable only for the File adapter. If you enter a value in this field when configuring the sender FTP adapter, it will have no effect.
    Yes, you're right !!
    Are you sure that the message is not getting picked in half-way
    Now, at this time, I can't see the XML data in the CC monitoring because the tool shows only the recent polling execute in the last 10 minutes. If the error recurs, I will check the payload of CC.
    How can I solve the problem with reading incomplete file (FTP mode)?
    ...Meanwhile I will try with Full cache refresh.
    Thanks
    Daniele

  • TS1368 when i try to access the itunes store to buy music, it loads at the top and says connecting to itunes store..then it loads all the way and goes to a blank page. it loads and seems like it is will work, but then goes to a blank page. Why is it doing

    when i try to access the itunes store to buy music, it loads at the top and says connecting to itunes store..then it loads all the way and goes to a blank page. it loads and seems like it is will work, but then goes to a blank page. Why is it doing this?

    Hello katyhale,
    I found a couple of articles that might help with the issue you are experiencing with the iTunes Store.
    If you are getting a white screen when accessing the iTunes Store and using a Windows computer, I recommend reviewing this article:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123
    If you are still not able to access the store, I recommend the following article:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Error to add urlservice sample portlet to pages

    I have successfuly installed the JPDK and URLService,and I can see the google portlet works in the portlet repository,but when I add it to pages ,there is a lot of error: : Error while adding Portlets to the Page. (WWC-44012) An unexpected error occu

  • I have an older model Mac Pro that isn't WIFI: how do I update it?

    I have an older model of Mac Pro - the MacPro 1,1 - that isn't wifi capable.a wifi network. How do I update it to a connect it wirelessly to my router? Would a PCIe card work?   If so, what would be the best sort?Should I, instead, get the relevant A

  • Table styles in RH don't transfer to Word 2010

    In RH, I have defined a table style called top-row-shaded, and have mapped this style for delivery to Word, in word-template.dot file. All RH tables of style top-row-shaded shoud map to my Word template style top-row-shaded, but they don't. Does anyo

  • Really simple question, stop function and scroll bar won't work

    I was working on different parts of this VI separately, when I put them together the scroll bar and stop button stopped working.  In the individual VI both are in the while loop. In the final one I was one scroll bar and one stop button to apply to a

  • Mapping FlatStructure from FileAdapter to Hierarchical IDOC

    We want to map the following  FLAT-Structure to an Hierarchical IDOC-Structure ZUECH_0210 recordset     H1     H2     H6     D1  (1 to unbounded)     D2  (1 to unbounded)         Meterno1     D3  (1 to unbounded)          Q1     D3          Q2     D2