Please designate the path of new firmware

This message keeps poping up ("Please designate the path of new firmware") when I try to upgrade the firmware of my WRT110 wireless router, even though I used the BROWSE button to select the new firmware .bin file.
Anybody has a clue to resolve this problem?
Mo
Solved!
Go to Solution.

Have you tried another browser to update the firmware? How about trying it on another computer? If both won't work, try to power cycle the router (unplug the power for couple of seconds) then once the power light goes solid, try the update again. If ever the update will still not proceed, reset the router by pushing and holding the reset button on it using a pin or a paper clip for 30seconds. Power it off again for another couple of seconds. Once the power light goes solid, try the update again.

Similar Messages

Please guide the path in Service Market Place to find CR2008 latest Service Pack and CR2013 latest Service pack with Visual Studio integration

Please guide the path in Service Market Place to find CR2008 latest Service Pack and CR2013 latest Service pack with Visual Studio integration for CR2013; I have S userID and log in; but could not locate the place to download

Hi,
I believe you are right!, The support portal is Showing Crystal Report for VS not the other one;
Our S User ID is out dated might be; It was created when CR 2008 was purchased. But we bought CR2011 license recently as mentioned below.
Below is the product purchased by our organization
CR 2011 INTL UPGR WIN NUL LICENSE - 1 to 2 Licenses, mix and match.
Does this version have maintenance rights?
I tried registering at Service MarketPlace hoping to get new S-User ID; Am i right path to get the new S- USerID ?
During registering it asked for "Customer or Installation Number (1) *" ; Where can i get this info or number; Kindly suggest

E71 can't disable the keypad autolock (new firmwar...

Hi. I just updated the firmware of my E71. A new feature which i find it very annoying is the new keypad autolock. I want to check if this is normal, or it is a problem on my E71.
On my E71 i have the keypad autolock disabled, while is phone lock is turned on (1 minute). In the previous firmare, i would only need to enter the lock code to unlock it. However, after i installed the new firmware, it will require me to unlock the keypad (left top key + key function) before i entre the lock code to unlock it; which is very annoying. Is this normal? Can i turn it off? I tried everything and it did not work, including turning on the keypad autolock for 59 minute. Please help, how can i turn this off. I want to keep the automatic phone lock feature, but i want to disable the keypad autolock.
Thanks a lot, Rabih

this probably is a case of a bug in ur device so what u can try are: plz make a back up
take out your sim card and put in *#7780# to restore factory settings. you should not lose any data, but all settings will go into default. try that first.
the second option is a reset *#7370# this one will erase all of your data, 'wipe the phone clean' and restore to factory settings. see if any of these options work and if you are able to use your phone as you like/need to.
the third option U can go in for a hard reset which will turn ur device as it left the factory totally new
U can also update/reinstall ur firmware and see the result...
Also use ur device without the memory card and see
in case of ur memory card there are different options available to you to get rid of the corrupt/unwanted data in your card.
menu--tools--memory---options---format memory card......
remember everything including ur factory installed apps will be deleted......... but u can always download them later either from nokia or google them...
or insert ur card in any reader or laptop and check for virus and also the hidden folders.......
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos.

Zen Touch: Importing Playlists to the player with new firmware?/ Where do I get MediaSourc

Hello!
I have a problem with my Creative Zen Touch. I have updated the firmware of the Player to 2.., the new one which causes many trouble. The trouble is that I can throw my music via plug and play on the Player, but just with the Media Explorer for Play-for-Sure-Devices and with the Windows Media Player 0.
With this programs it works quite fine, but I cannnot import playlists to the player, just the plain files. With the Media Explorer for Play-for-Sure-Devices I cant even select the Playlists and with the Windows Media Player the files just get loaded onto the player, but it does not import the playlist into the playlist-screen in the media-library in my Zen Touch.
Before the stupid firmware-update came out, I used the Creative MediaSource-software, this worked quite well, because I also could import my Windows-Media-Player-Playlists and this was great. But now it does not work anymore. The problem with MediaSource is that after the firmware-update it does not recognize that my Zen Touch is connected with the PC. That is the reason why I cannot use this software to drag my music onto the Zen Touch.
I tried to update my MediaSource via Internet via the auto-update-tool. Now I have mediaSource 3.30.2 but it still does not work. In this forum I read that there is a version 5 avaiable but where can I get it's Would it actually solve the recognizing-problem
Are there maybe other possibilities to solve this problem
I really need your help!
Thank you,
your Dridge from Germany

OK, now I have found the MediaSource5-Software and I have downloaded and installed it. In the startpage there is at the end of the box "transfer playlist" but if I click on it, it says, that my Zen Touch is not connected. Overall the new MediaSource does not recognize my player, like the version 3 did too. But other software is recognizing that the Zen Touch is connected with the PC, like the Windows Media Player 0 or the Media Explorer for PlaysForSure-Devices.
Please help me!

PLEASE NEED HELP TO FLASH NEW FIRMWARE ON LENOVO IDEA TAB A1107

Please can anyone help me install new Android OS on my Lenovo tab A1107. Current os is Android 4.0.4. Also i have 2GB internal storage and 12.01gb USB storage and 8GB SD card inside,Please tell me the version of OS to instal and how to install it.

Please divice power on and off want to flash new rom please help.
mcl630 wrote:
Go to Settings->About tablet->System updates. If there's an update available, it will be there.

How to set the path for new version of jdk 1.5.0

hi
i downloaded jdk 1.5.0 from sun website . i gave path like this C:\jdk1.5.0\bin; but showing error internal command doent reconiged.give me some instructions aboth this one with details.

Read item #5 in the Installation Instructions for the file you downloaded.

HT1904 I want to stop the auto renewal of Car and Driver Magazine which is scheduled for 1/6/13. Please provide the path to make this happen.

How can I stop an automatic renewal of a magazine?

There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098

Could you please tell me the path of PR header text?

Dear experts,
I want to add delivery informtion in pr header text,but i can not find the path ,i only found the path:spro=>materials management=>Purchasing=>Purchase Requisition=>Texts for purchase requisition=>Define text types,this path is to add PR line item text,could you please tell the path to add PR header text?
Many thanks.
Best Regards,
Merry

Hi,
There is no SPRO configration to create PR Header text
Use the Function module
Goto SE37
Use FM CREATE_TEXT - for create header text, SAVE_TEXT - for change.
Parameters:
TDOBJECT = 'EBANH'
TDNAME = purchase requisition number (with leading zeros)
TDID = 'B01'
CLIENT and LANGU - client and languag
regards,
santosh

N78 new firmware v.30.014 is (OFFICIALLY) released

hi all,
the NOKIA N78 new firmware is out,
Latest available software for Nokia N78, product code 0548461
Version: 30.014
Compare numbers
If this version is greater than your current software version, update now to get the latest features, applications and improvements.Go to Nokia Software Updater download
so guys,anyone updated his firmware tell us is there any new bugs ,or something has been fixed....
Message Edited by thescorpion on 14-Jul-2009 09:37 PM
Nokia 5730XM,200.12.87
If my post helped you in anyway,Please click on the (Kudos!) Star, THANK YOU!!

Nokia seems to be comitted to improve the user experience... Its really good to know that... They have to do it to survive... BTW Nokia N78 latest firm ware is a little better. The operations seems to be fast.
It has just been a day with the firmware.. So far no problem... I faced a few problems while updating the USB get disconnected when the update is about to begin... but the latest software update program has all required warning... It asked me to restart my pc and my cell phone... And try again ... I did it Alas it worked ... got it updated ...
I found a few things new :
The icons for videos (The one in old version was better) and search are all new.
I am from india. I brought this phone seeing the FM transmitter option. But after i brought the phone i found it missing.
But with this software update i got the option under the music menu :-) thanks a lot nokia.
Few problems with the camera still remains... music volume has come down a bit... the gps seems to be working a little faster.

How to change the path of an Access .mdb file @ runtime in Visual Studio 2012

Hello,
I'm hoping my question is simple enough to merit a quick answer. I will lay out the details:
I am writing a WindowsForms App in VB 2012. I have a Crystal Report that points to an Access .mdb at design time in order to get the proper structure and layout correctly.
However, during runtime, I need to point to a completely different .mdb file with the same identical structure. How do I do this? I've tried everything I could find on the net with no success and mostly because the answers are for C programmers. I mean, I can pretty much decipher it, but have gotten zero results.
Thank you for your time.
-Mike

ok. The code needs some small modifications.
I gave it a quick try and here is the InProc RAS SDK code which works for me. Add the assembly references to the app for all those assemblies used in the 'imports' statements in the code.
Imports CrystalDecisions.ReportAppServer.ClientDoc
Imports CrystalDecisions.ReportAppServer.DataDefModel
Imports CrystalDecisions.ReportAppServer.ReportDefModel
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Web
Imports CrystalDecisions.Shared
Partial Class _Default
    Inherits System.Web.UI.Page
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        Dim ClientDoc As ISCDClientDocument
        Dim logonPb As New CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag()
        Dim table_Old As New CrystalDecisions.ReportAppServer.DataDefModel.Table()
        Dim table_New As New CrystalDecisions.ReportAppServer.DataDefModel.Table()
        'Open the report object to initialize the ReportClientDocument
        Dim rd As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
        rd.Load("C:\Users\Administrator\Desktop\Report1.rpt")
        ClientDoc = rd.ReportClientDocument()
        table_old = ClientDoc.Database.Tables(0)
        'Clone the original table in the report
        table_new = table_old.Clone(True)
        ' Get the connection information from the report document for the first table in the collection.
        logonPb = table_new.ConnectionInfo.Attributes("QE_LogonProperties")
'set the path for new mdb
        logonPb.Item("Database Name") = "C:\Users\Administrator\Desktop\New folder\efashion1.mdb"
        ' Set a new table for the report, set the old table to the new one.
        ClientDoc.DatabaseController.SetTableLocation(table_old, table_new)
        'view the report
        CrystalReportViewer1.ReportSource = rd
    End Sub
End Class
Hope this clears the doubts

N78 New Firmware

Hello guys!
I know anybody here have the information about new firmwares coming to devices but you are much more experienced than me to know if N78 lifes cycle has end or Nokia would planning a new firmware to N78
I'm asking because it has lots of bugs that should be corrected, and when I say "lots" I mean at least 4 or 5 annoying bugs
The lastest firmware is dated from 05/08/09 (American Format)
Do u have any idea about this question?
Best Regards

Nokia seems to be comitted to improve the user experience... Its really good to know that... They have to do it to survive... BTW Nokia N78 latest firm ware is a little better. The operations seems to be fast.
It has just been a day with the firmware.. So far no problem... I faced a few problems while updating the USB get disconnected when the update is about to begin... but the latest software update program has all required warning... It asked me to restart my pc and my cell phone... And try again ... I did it Alas it worked ... got it updated ...
I found a few things new :
The icons for videos (The one in old version was better) and search are all new.
I am from india. I brought this phone seeing the FM transmitter option. But after i brought the phone i found it missing.
But with this software update i got the option under the music menu :-) thanks a lot nokia.
Few problems with the camera still remains... music volume has come down a bit... the gps seems to be working a little faster.

N95 photo shooting problem with new firmware V11

I have got a problem with photo shooting after upgrading my N95 (Product Code: 0534832) to the new firmware (v11.0.026) via Nokia Software Updater.
Before upgrading the firmware, I can turn off the loud and ugly snapping sound when shooting a photo; all I need to do is to change to Silent Profile (that has Warning tones OFF). But it seems that I can no longer turn that ugly sound off with the new firmware!
Is that a bug? Is there another way I can turn the sound off?

Actually I have 2 N95 phones, one is my GFs, both of them are bought and used in Hong Kong.
The way I test the differences between versions is directly comparing each feature with the two phones, where the one with new firmware has product code #0534832, and the one with old firmware has product code #0548445. Both of them has www.nokia.com.hk printed on the box and manuals, so I assume local law is not an issue.
By the way, I have just discovered that the one with product code #0548445 cannot update via Nokia Software Updater.

Cannot Update - Error 1324: The path New Folder or the volume is invalid. Please enter it again.

I have been trying to update Adobe reader but every time i trie to this message shows up: Error 1324: The path New Folder or the volume is invalid. Please enter it again. I am running on Windows XP SP3 and using the latest firefox browser. I am not sure if this question has already been answered in this forum so if it has a link to the thread would be appreciated.

For investigating more on this issue we would need the install log. For creating install log follow the below steps:
1. Go to start menu and run command
2. Type Regedit and press enter key
3. Go to the following path and create keys:
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
Reg_SZ: Logging
Value: voicewarmupx
then Install Reader X update. Once you get the error message get the snapshot of error message and then Type %temp% and hit enter. Get the file name as MSI----
Provide the snapshot of error message as well as MSI log.

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed. The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed.
The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."
Is there a way to get the Apple Configurator to try to re-download iOS 8?

Apple Support had me delete the image file from the following location:
~/Library/Containers/com.apple.configurator/Data/Library/Caches/com.apple.confi gurator/firmware/
The file name was iPad3,4_8.0_12A365_Restore.ipsw
I deleted this file and ran the prepare again and it download the iOS 8 ok and successfully prepared the iPad.

I want a new firmware for the N93i!

Please don't forget this mobile the N93i! I love this phone! I hope you can update a new firmware, Please. I want to have the same applications than the N95 for the foto camera and the video recorder, when somewhere it's a little dark the quality is bad sorry for my poor english. Thank you.
Solved!
Go to Solution.

You don´t seem to know that the people that post on this board don´t write FW for phones. We just provide user/user or costumer/costumer help.
If you want to adress Nokia, try using the Contact button on the website itself.
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Please designate the path of new firmware

Similar Messages

Maybe you are looking for