Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

IakovM,
See below for a few links.
You should ask the people at Troll Touch if the have a software to create a user interface.
Usually, the maker will provide programmers with the programming codes and a interface guide line on how to program the different gestures.
I know that PQLabs as a SDK for their touch screens.
With the programming codes in hand, any good Flash or HTML 5 programmer can setup a web site that will take advantage of the touch screen.
One thing I can tell you is that with touch screens based web sites, when it comes to links or buttons to push,everything needs to be bigger than on a standard web site. People will be using their fingers to do the clicking.
A finger is a much bigger pointer than a mouse pointer!
So links or buttons that are too small or to close to screen edges will be hard to click.
You can look at these for possible solutions:
TUIO is an open framework that defines a common protocol and API for tangible multitouch surfaces.
http://www.tuio.org/
http://kivy.org/#home
http://www.touchuserinterface.com/2009/06/multi-touch-programming-for-python-and .html

Similar Messages

Link labview with other software which can do hydraulic simulation such as Nanas Fluent.

   Hi all:
          I currently want to exchange data between labview with Ansys fluent. That is: sending flow boundary condition and initial condition from labview to hydraulic simulation software (ansys fluent), and get simulation result back to labview from that software.
         I didn't find any modules online to link labview and fluent together. (There are others such as Labview Solidworks module)
         Is any one know how to link labview to any software which can do hydraulic simulation?
         Thank you very much. :-)
-Bowen

Do you know of any other programs that exchange data with Ansys? If so how do they do it? ActiveX is a common way for communicating between LabVIEW and other programs, is this an option?
Justin Parker
National Instruments
Product Support Engineer

Need software which can send images to my editor, have them make selections, share them with me so I can edit the images and send the final results back to them. Will Lightroom work?

Need software which can send images to my editor, have them make selections, share them with me so I can edit the images and send the final results back to them. Will Lightroom work?

What I would like to do is to use Lightroom as I have been doing with LR 5.7. Tag certain images to be shared to the Creative Cloud which my editor can then see and tag as to which she would like to see final versions of. In the best case, I would then see these tags and edit the images as appropriate and save the JPEGs back to the Cloud where she can download them for final production.
Possible?

I want to watch 2d movies converted to 3d, is there any software which can do this for mac, i know there are many for windows.Or any player which can do this?

I want to watch 2d movies converted to 3d, is there any software which can do this for mac, i know there are many for windows.Or any player which can do this?
Or may be i can can watch normal 3d movies on my macbookpro with a glass?

Xilisoft 3D Video Converter for Mac - 3D converter to convert 3D ...
Mac 3D Video Converter - 3D Converter convert 2D video to 3D, 3D ...
Convert DVD Movies to 3D Mac - Best 2D to 3D Converter
4Media 2D to 3D Video Converter for Mac: Convert 2D video to 3D ...
Convert 2D Video to 3D for Mac- Tutorial for You about Using 2D ...

How to export iPhoto Album in iMAC and have similar folder structure(with Timestamps) which can be viewed in finder

How to export iPhoto Album in iMAC and have similar folder structure(with Timestamps) which can be viewed in finder
In simple terms, I wanted to view the photos in Windows system, similar strcture of iPhotos

If you want to copy all of your photos to a Windows machine and have them in folders representing the iPhoto Events the were in quickly and easily just do the following:
1 - open the library with the Finder as shown in this screenshot:
2 - COPY the Originals/Masters folder to the Desktop.
3 - copy the Originals/Masters folder to the Windows machine.
This will give you all of your original image file in their Event folder on the Windows machine.
NOTE: With iPhoto 8 or newer the Event folders in the Masters folder will be titled by date (EXIF) if imported from a camera. If imported from a folder the event folder will have the same title as the source folder. If imported singularly or in a group without a folder the title will be a date, either the EXIF date or import date.
With iPhoto 7 (08) and earlier the Event folders in the Originals folder will have the same title as the Event has in the library.
This method would be quicker but not provide the additional metadata you might have added in iPhoto like keywords, titles, descriptions that exporting out of iPhoto with Format=JPEG and the checkboxes selected to include keywords, titles, places, etc, checked.
OT

I am looking for a software which can recognize grain boundaries on a wafer. have you solutions?

i am working on a wafer tracing project in Scancell which is making solar cells in Norway. the appearance of wafers are changing in every step in produt line. but only the grain boundaries on the wafer is the same. we want to identify wafers through recognize the grain boundaries. i want to find a software which can do this. i attach 2 pictures: one is the raw wafer in the beginning, the other is the wafer at last. you can see grain boundaries.
Attachments:
P1010014.JPG ‏411 KB
P1010009.JPG ‏451 KB

That�s a custom application. I am sure you have matlab http://www.mathworks.com/ . You could build your own. Labview does have some things you may won�t to ask there application support engineers. If I had the version of matlab needed for this type of application I would try to write a small program. But I don�t sorry

Hi there, I am setting up an online furniture company and need a software which can take a cut ou

Hi there, I am setting up an online furniture company and need a software which can take a cut out of my product (e.g. a sofa which was photographed on its own in real life) and overlay the fabric swatch onto it so the customer can see the sofa/ product they have selected in any of the colours/ fabrics I offer.
Is there a product which can do this?
Any help much appreciated!
Regards,
Sarah

Lightroom isn't really suited to this type of work. Try Photoshop or Photoshop Elements. You can find more information on both at http://www.adobe.com/products/photoshopfamily.html?promoid=KAUCA

I am using several Macs running Yosemite. I was recently "upgraded" to Xfinity's new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for

I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem

First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted

I live in india and i want to buy Iphone 4s ,which will be better choice a unlocked one, refurbished or one with contract which can be unlocked later?plz help

I live in india and i want to buy Iphone 4s ,which will be better choice a unlocked one, refurbished or one with contract which can be unlocked later?plz help

Do you research as to what is available in India and what the
various prices/costs are. Only you can decide what is the
best choice.

Build a blank/other type of page which can show links to other pages

Can someone please tell me how to build a blank/other type of page which can show links to other pages? I mainly want a page to show 3 links, once someone clicks on it, then it will go to a specified page. I tried using URL, but that did not work. Any advice is greatly appreciated. Thank you very much for your help in advance.
-Grace

Do a region (probably a HTML-based one is fine), enter in the HTML for your links, and that should be it. What didn't work about this?
Your links probably should appear like this in your coding (use substitution variables):
f?p=&APP_ID.:3:&APP_SESSION.
In the above example, "&APP_ID." will resolve dynamically to the application ID that you are in, "3" is page 3 (change this to whatever page you want the link to be), and "&APP_SESSION." is the existing session number (if you don't include this, the user will receive a new session ID if the destination page is public or will be intercepted annoyingly to log in and get a new session ID which you probably don't want).
Do not include the full http path. Just start with f?p... and everything is assumed to be relative to Apex on the current environment.
Those are effectively the minimum requirements for a URL in Apex to go from one page to another in an app. You can add to that the additional URL parameters for Request value, Set items with values, clear cache, reset pagination, etc. if you need to. Check the Apex online help under "understanding URL syntax" for details on these.

How I can view more than 1 page at once on my screen with "PAGES" 5.5.2?

Hello, I have a iMac 27" and would like to know how I can view more than 1 page at once on my screen with "PAGES" 5.5.2?
In the past one could do this by clicking in the "zoom" field on "PAGES", but ever since Apple have seemed to "simplify" PAGES.... well, I'm spending more time searching than working...
Can anyone help? I'm going nuts with this issue.
Thanks.

Hi viking.
Just to keep you informed, it's the least I can do after the time you spent helping me.
The best solution I have found and it works excellently is the following:
- I installed VMWare on my iMac.
- Created a virtual machine and installed OS X7.0 on it.
- I "imported" or reformatted this virtual machine with an image disc (a DMG) of my entire système installed on my previous Mac (which was running OS X7.5 and had iWorks installed on it)
The result is fantastic.
I now have a virtual machine running Mac OS X.7.5 on my iMac (which is running Yosemite). As, I also managed to import into this virtual machine my image disk (DMG) of my entire MacBook Air (which had MacOS X7.5 and had all apps including iWorks) I can use Iwork just like in the "good old days" !!!
So I now simply jump from one to the other, its perfect!
Thank you very much for the time you spent helping.
Have a great day.

Have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture. The Apple icon, usually at top left corner, appears in to

have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
The Apple icon, usually at top left corner, appears in top right corner in a strip including all that left hand. When the computer is restarted, the screen goes back to normal. But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode. My large flat screen is relatively new.
The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.

That sounds like a Hardware problem.
You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation.

I need a app which can record incoming and outgoing calls automatically without internet

i need a app which can record incoming and outgoing calls automatically without internet.
Can some help me on this ?

As far as I know there is no app to record phonecalls because US regulations, but I am not using iphone in US so we definately need call recorder. HTC or Samsung has call recorder so why we dont?

How do I redeem my mountain lion software which I just purchased and received password onto my mac?

How do I redeem my mountain lion software which I just purchased and received password onto my mac?

Go to the App Store and at the top right under Quick Links is where you enter your redemption code.

I have a Mac with software version 10.5.8 My hardware overview: Model Name: iMac Model Identifier: iMac8,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.8 GHz Number Of Processors: 1 Total Number Of. I is it poss to

I have a Mac with software version 10.5.8 My hardware overview: Model Name: iMac Model Identifier: iMac8,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.8 GHz Number Of Processors: 1 Total Number Of. I is it poss to upgrade to Lion.

Yes. You need to purchase Mac OS X 10.6 on DVD first.
(62528)

Please do me provide with software which can support flipping and sreaming page on 27" iMac touch screen display

Similar Messages

Maybe you are looking for