Please do something about the lack of a WORLD MUSIC genre under browse!
While I really hate the blanket term "World Music" to describe endlessly varied styles of music, it's better than nothing. Under the Spotify browse section, there is no real option to find global tracks. The global top 50 is a good start but that's mostly EDM and pop music. There is the 3rd-party desktop app "Music Of The World" which I love but I rarely use Spotify on my desktop (could this ever be implemented into mobile?) So I ask, nay I beg, please add a Global/World/International, whatever you want to call it, to the Genres and Moods section of browse. It will increase my quality of life 20-fold. That's an exaggeration but it would make me a happy boy at the very least. Don't you want me to be a happy boy? I thought so. Thank you!Kirk
Another thing to keep in mind is how much is going on during a patch switch. If you have a 6 channel strip patch, then switch to another 6 strip patch.. that's potentially 12 strips during the patch change, depending on tail times.
I've learnt that going thru the Logic patches, many of which contain Space Designer, will lead to high load. If you need to go into the Logic folder, which I suspect is separated from the Pre-Mapped patches for a reason (high CPU load potential maybe), then go over each strip you load and move as many effect plug-ins like Space Designer onto a bus. Reuse as much as possible.. in a live venue that expensive SD setting isn't going to sound that much better than a cheap one that you've already used on every song.
Speaking of which, try changing the Sample Rate in Space Designer (to the left of the Length parameter). This can help if you have several SD's and the crowd won't notice.
Similar Messages
-
Please do something about the software update for ...
I already posted my problems here...
/t5/Xseries/X3-02-Problem/td-p/869643
And to add another problem, Nokia Software updater tells me that the latest software must be approved by my network carrier. I already escalated this problem to my network provider but they dont know it. They said that i should contact nokia about this. I even tried using other networks but no luck.
Please make it easier to update softwares here in the Philippines.Yes, it works, but as I mentioned, it stinks. It doesn't update as often, nor provide as detailied info as TWC does.
-
I can't get the leapfrog connect to open. It says something about the Testgen fonts. Please help.
I need help with the leapfrog connect application. It won't open and it keeps saying something about the font Testgen. Please help me if you can.
Considering that the "Most recent updates" link on the Leapfrog Connect homepage is dated November 2009, I wouldn't hold out too much hope that your software is compatible with Lion, released in July 2011.
-
The audio is played through the tv, but the picture plays the first still shot of the moment it is connected then says a message saying "we're sorry" then something about the network provider.
Welcome to the Apple Community.
Please provide a little more detail, such as what you are trying to do when this occurs and exactly what the message says. -
Open Question: question to those who comment about the lack of apps for Windows Phone 8
We have read every Lumia review and we are listening. An open question to those who comment about the lack of apps for Windows Phone 8.Tell us which apps you miss? Nokia/MSFT Customer Care
The major apps that are missing are Banking Apps. There are a few, but major banks like Regions Bank, Capital One Bank, are nowhere to be found for Windows Phone. Microsoft should be pursuing these banks to develop apps for the platform. Maybe bribe them with free software or tech support or something. Also some of the dating apps like Grindr for the gay community, Blender for the straight community, are lacking as well. Perhaps Microsoft could assist them in developing the "unified" app for both Windows and Windows Phone?
In fact, Microsoft would do well to begin a "Developer Assistance Program" where developers could (for a small fee) contact the DAP Center and get assistance with issues creating apps for the Windows Platform. If developers know they have a source to go for assistance, they may be more inclinded to develop better apps. -
I have sownloaded an HD movie from iTunes store and when I attempted to play it on my Windows 7 PC a error message popped up saying something about the display not being compatible for HD movies. I have tried changing the display resolution several times but it didn't help. Now it just comes up with a blank screen when I attempt to play it. SD movies work fine. I have the latest version of iTunes installed.
Can anyone help me resolve this problem?Apparently the display is required to be HDCP compatible to view HD movies in iTunes. My display isn't so this is my problem. I contacted Apple support and they have agreed to credit me for the HD movie and I have now downloaded the SD version.
-
Revision: 11454
Author: [email protected]
Date: 2009-11-04 18:17:33 -0800 (Wed, 04 Nov 2009)
Log Message:
ASyncList class ASDoc change: added explicit warning about the lack of support for re-inserting pending items.
QE notes:
Doc notes:
Bugs:
Reviewer:
Tests run:
Is noteworthy for integration:
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/AsyncListView.as -
is apple going to come out with a iso that lets ppl who have the iphone 3g to put up backgrounds its bs that i cant do it when ever i see something about the iphones even befor the 4g that all ways had backgrounds so what the **** is with that
iPhone 3G has received its last iOS update. If wallpapers behind the homescreen icons is such an important feature for you, you'll need a newer model iPhone.
-
wen i try to install itunes it say i have ti uninstall the old one so i try to uninstall it an it say something about the path
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect. It says something about the IP address being used by another device. Second wifi network was also created. The Mac worked for a few minutes and then gaev up citing eth IP problem......any clues people??
If you have not already done so, now would be a good time to perform a complete network power cycle.......to give everything a fresh start.
Power off every device on the network.....computers, printers, hard drives, etc......in any order that you want
Wait a full minute
Start the modem, and let it run by itself for 2-3 minutes
Start the next device connected to the modem and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network -
Got a MacBook with 10.5.8 I am anable to burn cds, dvds, and dl dvds. Everything worked before I reformatted my computer but now it comes up with error messages like unable to communicate or something about the laser power levels. Help! Anyway to check to see what is going on?
Hi I am having the identical problem with my 24" intel iMac 2007..... Did you ever figure out what the problem was? I'm on round 3 now and with a completely blank grey screen and it won't start up from the disk 1.. I also have diskwarrior and techtool pro as well as the osx leopard and snow leopard disk... The HD is new.. Replaced by apple 3 months ago.. Don't know the cause the first time this happened about 9 months ago.. 2nd time, 6 months ago it never rebooted from the office for mac 2008 critical update... Did a clean install after backing up to TC... Took it to apple replaced HD even though it appeared ok, they checked all hardware and I ran techtool pro daily ever since. Last week software update had several updates avail. Office for mac being one of them.. I updated and have never booted since.. . I swear to never ever use another Microsoft product as long as I live if I can just fix this once more... Help me please
-
When I down load books, can I read them on my iPad and iPhone? I went to open a book on my phone but I got a message that aid something about the bill already associated with an appleid. I use the same id for both devices.
All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.
-
Please let me about the COIS SAP transaction code(s)
Please let me about the SAP transaction code(s) from which I will get monthly data of the folowing:
Material or product wise listing of raw materials used in WIP & converted to Finished goods remaining as closing stock
Edited by: Isabelle Britten on Jul 21, 2008 12:45 PMHI,
Following are the different t.code for the WIP Reports.
FAIP0 WIP Clearing
KKA1 Order Results Analysis and WIP Calc.
KKA1P Order Results Analysis and WIP Calc.
KKA2 Project Results Anal. and WIP Calc.
KKA2P Project Results Anal. and WIP Calc.
KKAG WIP: Display Worklist
KKAO WIP Calc.: Collective Processing
KKAQ Display WIP - Collective Processing
KKAS WIP Calc. for Product Cost Coll.
KKAT WIP Display for Product Cost Coll.
KKAV WIP Calculation for Cost Object Hier
KKAW WIP Display Cost Object Hierarchy
KKAX WIP Calculation for Order
KKAY WIP Display for Order
KOB8 Orders: WIP/Results Anal. Line Items
You can find Goods receipt Report via MB51 (Selcting Mov. Type 101 ).
Regards,
Dhaval
Edited by: Dhaval Choksi on Jul 21, 2008 1:44 PM -
Please let me about the SAP transaction code(s)
Please let me about the SAP transaction code(s) from which I will get monthly data of the folowing:
Material or product wise listing of raw materials used in WIP & converted to Finished goods remaining as closing stockDear parameswar
The simple work is go to MM60, give material type ROH (for raw material) and execute. You will get list of all raw materials. Make a note of it and now go to MB51, give those material codes and give movement type 261 for issue from stores and execute. You will get raw materialwise details of how much quantity has been issued to WIP. The same exercise you have to do for FERT.
thanks
G. Lakshmipathi -
Please let me about the SAP transaction code(s) from which I will get month
Please let me about the SAP transaction code(s) from which I will get monthly
Material or product wise listing of cost of finished goods sold & lying as stockDear parameswar
Go to SE16, give the table MBEW and select the following fields:-
VERPR - If you want to see the moving average price of that particular material
STPRS - If you want to see the Standard price of that particular material
SALK3 - If you want to see the total valuated stock of that particular material
To see how much stock is available, run MMBE and execute. You can also check in MC.9 (mcdot9)
thanks
G. Lakshmipathi
Maybe you are looking for
-
I currently have a txt file with food|drinks|games| and so on.... however I currently have problems reading the words with |.... May I know why? As I want to check the words individually. Thanks
-
What Handbrake setting to use to convert DVD to play both Appletv & ipod???
When I convert a DVD using the Apple Tv setting it doesn't play on my ipod. What setting should I use on Handbrake to play on both? Does it matter as far as quality of play?
-
Arithmetic Expression & Relational Check
Hi - I am implementing a sample use case where for all baggage received, if a bag has been taken off the baggage conveyor belt and not loaded on the aircraft for more than 15 minutes, an alert needs to be sent. I have written the query in the event p
-
Facetime in contact list disappear
My iphone4s with the latest ios update 6.1.3 the facetime function button had disappear from my contact. What's problem with my iphone ? How to return it back ?
-
Hi frnz, I have to create a alv report using 1 header table, and two item tables. But we can use reuse_alv_hireseq_list only for two tables . so i cant' this function. Can anybody send me sample code to create al