PLEASE don't pass this one up!!!

Ok, hopefully I have your attention. I have asked this about 5 times and never even got a response. It's somewhat frustrating.
Anyway, I'm working a system out with logic pro 8 and a MIDI controller to use it as a DJ performance rig and play my digital music live. With what I have figured out, only one thing stands in my way, and that's the MIDI capabilities of the software. I set key commands for my controller, but whenever I set them up for a specific song, they are held out through the whole application, not just a project. What I want to do calls for individual command sets in every song, so like knob R1 isn't controlling a flanger rate in all of my songs, but only for the project I call up. Is it possible to set up "song sets" like this in logic, and if so, how would I go about doing it?
If anyone else performs with logic live, please let me know so I can maybe get some ideas on techniques for performance. And if there are any good "remix-style" plug-ins out there, like a scratch or beat-juggling plug-in, let me know about that too.

As you've already found out, controller assignments are not song specific, they are part of the global preferences.
For the most part this makes sense ("Hmm, did I map that key command I always use on control=F9 to a different key in this song..?")
However, if you learn controller assignments to plugins, in general they only apply to the plugins on the channel of the selected track. In this way, if you have mapped MIDI CC #13 to flanger depth, then if you switch to a track that doesn't have a flanger on it, you can have CC #13 mapped to something else as well.
You can also arrange automation parameters based on the currently available tracks, so you can set up groups of parameters you want to control by assigning them as automation parameters and grouping them together in folders. I forget what this mode is called, but it's part of the MCU controller assignments handling, and it's useful.
Be aware though that Logic isn't really designed as a live performance tool, albeit it can be bent to do that - Ableton's Live does much better here.
There are lots of beat juggling plugins around - I like Audio Damage's Replicant, but you can also try the free Supatrigga, and I'm sure others will recommend stuff too (I also like Live's built-in Beat Repeat).

Similar Messages

Oh know, please don't do this to me iPhone!?!?

Deciding that I have always been a Mac person it was only obvious that I get the iPhone for my job and pleasure. I have come across one major problem!!! I'm Japanese, and I live in Puna Hawaii. Though I speak english with no problem, the world I work in does not always speak english perfectly. I had assumed when buying this iPhone that I'd be able to write/text messages in other languages? So I have a $600.00 so called "state of the art" phone in my hand, yet I'm unable to text in Japanese!? Wassup with dat?
Please don't tell me I have to wait to iPhone launches in Asia before Apple puts Japanese "Hiragana" and other languages on their "state of the art" phones. Which at this point don't seem so state of the art if you ask me?

you'd figure all language fonts etc, would be in place ,right?
Actually Japanese fonts are in the right place. You should have no problem reading Japanese on the web, email, etc. But in this version input and user interface is English only. Presumably that will be modified as the iPhone is released for the European and Asian markets over the next 18 months or so.
A workaround for doing email several languages can be had by pointing the iPhone browser at this page:
http://pointatme.com/keyboards
Possibly something similar could be done for Japanese Kana, but it might not be very easy.
More general info:
http://m10lmac.blogspot.com/2007/06/iphone-language-capabilities-seem.html

I want my old updation how do I get it back I don't like this one

I want my old updation how do I get it back I don't like this one

I know that I really don't like the updated version it's really bad I wish that I didn't update my phone :(

TS1696 I purchased and downloaded an episode of a television show onto my MacBook pro, as I have done before, but this one plays without audio. What gives?

I purchased and downloaded an episode of a television show onto my MacBook pro, as I have done before, but this time it only plays without audio. What gives?

Okay, so the download is possibly corrupt. Did you try downloading again?
Also, you'll likely get more appropriate responses posting to the iTunes for MAC forum instead of the iTunes for Windows forum where this currently is.

Please help me figure this one out!!!!

I recieved leopard mac os x 10.5 at 10am the morning it came out!!!!!
i have already installed it 3 or 4 times cause of issues.....
i never got the blue screen or login problems!!!!
first time, it just didnt work, so i reinstalled it and thought it was great!!!!!
second time, after reinstalling it the internet menu would only show me the network i was connected it to!!! i called apple, spoke with a level 3 tech and he called me back next say and walked me through re installing it!!!!
third time..... it was working great and this morning i was looking for my other network but it will again show me the one im connected to and thats it...
+ my dashboard wasnt working, but i deleted a preference pane and it started working!!!!! leopard is great, but i cant keep reinstalling it!!!!!
so i tried to re install update 10.5.1 and restarted it, blah blah
but it still wont show me networks!!!!! HEEELLLPPP PLLLEEEAAASSSEEEEE
thank you in advance,
becks87

It is unusual for the calendar to sync and not the contacts in Outlook. I've worked with Outlook for years. You didn't answer what computer OS you are using. If it is Windows, have you tried to reset the sync history in iTunes? Do that by opening iTunes, go to Edit>Preferences>Devices and click on reset sync history. If you have done this and it doesn't help, then we can try and run scanpst.exe on your Outlook file and see if there are any errors. Search your computer for that file, however it normally resides in one of the Microsoft Office folders in the folder Program files. After that, you can see if it will sync.

Urgent please send code for this one ( write code by using core java)

hi sir
my question
i am taking one square box .. and i divide that square in again four parts .. now i am placing one object in 1st box now i want to move that object to 2 box or third box... like that only if my object is in 1st box now i want to jump directly to 4th box
i want that programing code the code will written BY USING CORE JAVA ONLY
PLEASE HELP FOR THAT

hi sirWhat if I'm a madam?
i want that programing code Why did you post here asking for it?
1) You are the Lead Architect at a world-class company and none of your staff of topnotch developers are able to handle this insidious task. You need to pull in outside resources for this noodler. You would use Dice, Monster, etc., but, by a freak coincidence, you happen to have had illicit trysts with the wives of several high-ranking executives in each of those companies, and as a result, have been blacklisted in perpetuity. You sought help here because you know that the denizens of this particular cyber-community are not only the best of the best of the best in the world of software development, we also happen--by yet another bizarre convergence of the unfahtomable Threads of Fate--to be the handsomest and best-endowed, dude-tube-wise. This is exactly what you need to distract your wife from your many concubines so you can continue with your plan for world dominance, which, of course, is but a small cog in the machina profunda that grinds unfailingly and inexorably toward your ultimate goal of the perfect tofu burrito.
2) You are a lazy slimeball student who thinks it's acceptable to take credit for somebody else's work. You have no motivation, no ethics, and nothing to contribute to the society upon which you will become a bigger and more loathsome burden daily.

Please help me on this one

i am buying a new iphone and want a white one, the only concern i have is the possibility of cracking on the back plastic. is this a widespread problem , let me know your experiences of cracks on the new iphone 3GS please, especially owners of the white version. many thanks
ps: overheating is that a issue for you or is it just a small minority as i presume it probably is ?

arangatang57 wrote:
i am buying a new iphone and want a white one, the only concern i have is the possibility of cracking on the back plastic. is this a widespread problem , let me know your experiences of cracks on the new iphone 3GS please, especially owners of the white version.
From reading here, the cracks tend to be near ports/openings (earphone and such) and in the outer coating vs. the body of the case. I can't attest personally because mine is in a case so if I have any cracks I can't see them.
ps: overheating is that a issue for you or is it just a small minority as i presume it probably is ?
I think most problems reported are a small minority; but that's what I'd expect in a forum devoted to dealing with technical problems. I'm experiencing no problems and no remarkable heating after 3+ weeks.
Phil

Data don't pass from one server to the other ???

Hello,
I have a big problem.
I have define all the data server from all the technologies I want.
All the tests are good.
I have created interfaces all the first work well
But.....
When in my interface the Source and the target are not physicaly on the same server there's no data transmitted to my target.
In the Operator I see that my interface have been executed without error but that no data have been inserted...
So source on server A, Target on server B and even if there is no error during the execution, nothing is inserted on the target.
Moreover, The SQL generated on the source is correct and when I execute it on a query editor i have the good data...
But nothing in the target
I'm passing by an scheduler agent installed as a NT Service.
Please Help me ):
BM

Hi Veera,
Through SE16 Display your table select necessary entries goto menu table entry-> transport entries. There it will ask you for TP no. Store entries in TP and then transport it to required system.
Thanks and Regards,
Vaibhav Pendse

TS1424 Hello: Please don't think this is a dumb question, but I selected a free trial of a magazine and now I'm being charged and don't know how to stop it.

How do I cancel a free trial of a magazine? Also, I was charged for something that I thought was free but isn't.

There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
For the item that you thought was free, have you made any in-app purchases within it and/or did you add or change your credit card details when downloading it (could it be a temporary store holding charge ?). If you think that you've been charged when you shouldn't have been then you can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption.

I want a job in firefox. Just tell me the things that i'll need to learn to do so. Thanks and please don't consider this to be a joke!

I learn things quite quickly when it is about the codes.. Thanks... Waiting to be heard :)

You might want to get started as a volunteer, since that will help you better position yourself in relation to ongoing Mozilla projects, so I'll give you both of these links:
* https://www.mozilla.org/contribute/
* https://careers.mozilla.org/

Please! shed light on this one error

Can someone please help me with this one error. When I compile and for the life of me can't figure out why the readInput is wrong.
My program is to read using vector pulling up PetRecords by name and sorting.
The following is my code
<import java.util.*;
public class PetRecordsSortedByName
public static void main(String[] args)
Vector pet = new Vector();
char repeat = 'y';
String pause = null;
while(repeat == 'y' || repeat == 'Y')
PetRecord nextPet = new PetRecord();
nextPet.readInput();
pet.addElement(nextPet);
System.out.println();
System.out.println("Enter another pet record: (y for yes): ");
repeat = SavitchIn.readLineNonwhiteChar();
boolean sorted = false;
int iterations = pet.size() - 1;
while(!sorted && iterations > 0)
sorted = true;
for (int i = 0; i < iterations; ++i)
if((((PetRecord)pet.elementAt(i)).getName()).compareTo(
((PetRecord)pet.elementAt(i + 1)).getName()) > 0 )
PetRecord temp = new PetRecord();
temp = (PetRecord)pet.elementAt(i);
pet.setElementAt((PetRecord)(pet.elementAt(i + 1)), i);
pet.setElementAt(temp, i + 1);
sorted = false;
--iterations;
for(int i = 0; i < pet.size(); ++i)
System.out.println();
System.out.println((PetRecord)pet.elementAt(i));
System.out.println();
System.out.println("Hit enter to continue.");
pause = SavitchIn.readLine();
<<<<<THIS IS THE COMPILING ERROR>>>>>>>>
C:\My Documents\Java Homework\ch10\PetRecordsSortedByName.java:13:
cannot resolve symbol symbol : method readInput ()
location: class PetRecord nextPet.readInput();
^
1 error
Tool completed with exit code 1

OOPS SORRY
HERE IT IS
Class for basic pet records: name, age, and weight.
public class PetRecord
private String name;
private int age;//in years
private double weight;//in pounds
public void writeOutput( )
System.out.println("Name: " + name);
System.out.println("Age: " + age + " years");
System.out.println("Weight: " + weight + " pounds");
public PetRecord(String initialName, int initialAge,
double initialWeight)
name = initialName;
if ((initialAge < 0) || (initialWeight < 0))
System.out.println("Error: Negative age or weight.");
System.exit(0);
else
age = initialAge;
weight = initialWeight;
public void set(String newName, int newAge, double newWeight)
name = newName;
if ((newAge < 0) || (newWeight < 0))
System.out.println("Error: Negative age or weight.");
System.exit(0);
else
age = newAge;
weight = newWeight;
public PetRecord(String initialName)
name = initialName;
age = 0;
weight = 0;
public void set(String newName)
name = newName; //age and weight are unchanged.
public PetRecord(int initialAge)
name = "No name yet.";
weight = 0;
if (initialAge < 0)
System.out.println("Error: Negative age.");
System.exit(0);
else
age = initialAge;
public void set(int newAge)
if (newAge < 0)
System.out.println("Error: Negative age.");
System.exit(0);
else
age = newAge;
//name and weight are unchanged.
public PetRecord(double initialWeight)
name = "No name yet";
age = 0;
if (initialWeight < 0)
System.out.println("Error: Negative weight.");
System.exit(0);
else
weight = initialWeight;
public void set(double newWeight)
if (newWeight < 0)
System.out.println("Error: Negative weight.");
System.exit(0);
else
weight = newWeight; //name and age are unchanged.
public PetRecord( )
name = "No name yet.";
age = 0;
weight = 0;
public String getName( )
return name;
public int getAge( )
return age;
public double getWeight( )
return weight;

How to code this one?

Please try to code the following:
1. If payment end date (PA0014-ENDDA ) = '12.13.9999' (Delimited) AND 1st Payment date (PA0014-ZDATE) < Sept.01 of the current fiscal year.
2. ELSEIf payment end date (PA0014-ENDDA ) = '12.13.9999' (Delimited) AND 1st Payment date (PA0014-ZDATE) > Aug 31 of the current fiscal year.
3. ELSEIf payment end date (PA0014-ENDDA ) <> '12.13.9999' (Delimited) AND 1st Payment date (PA0014-ZDATE) > Aug31.
4. ELSEIf payment end date (PA0014-ENDDA ) <> '12.13.9999' (Delimited) AND 1st Payment date (PA0014-ZDATE) < Sept.01 of the current fiscal year.
5. ELSE.
   EXIT.
ENDIF.
NOTE: I have a problem on how you can determine if that particular date lies on that particular fiscal year or not. Please help me code this one.
II. This are conditions between of each code.
PAYMENT DATE is a variable should be used to store each successive payments.
For Scenario 1, set (PAYMENT DATE ) = 1st payment date occuring after Aug 31 (Fiscal YEar)
For Scenario 2, set (PAYMENT DATE ) = 1st payment date (SCREEN field: P0014-ZDATE)
For Scenario 3, set (PAYMENT DATE ) = 1st payment date (SCREEN field: P0014-ZDATE)
For Scenario 4, set (PAYMENT DATE ) = 1st payment date occuring after Aug 31 (Fiscal YEar)
IF the [Payment date] is <= to the infotype 0014 record end date (PA0014-ENDDA), do
If the [Payment date] is in between the start and end date of the current Fiscal year
     If the unit (PA0014-ZEINH) is Days,
           [Payment date] = [Payment date] + (# of days)
           Add recurring payment (PA0014-BETRG) to total compensation counter
           Endif
     If the unit (PA0014-ZEINH) is Weeks, then {
              [Payment date] = [Payment date] + (# of weeks)
           Add recurring payment (PA0014-BETRG) to total compensationcounter
     Endif
     If the unit (PA0014-ZEINH) is Months, then {
              [Payment date] = [Payment date] + (# of months)
            Add recurring payment (PA0014-BETRG) to total compensation counter
     Endif
     If the unit (PA0014-ZEINH) is Years, then {
               [Payment date] = [Payment date] + (# of years)
            Add recurring payment (PA0014-BETRG) to total compensation counter
     Endif
Endif
Endif
Repeat for next payment
Repeat for the next infotype 0014 record (if it exists)
I really need help! So guys whos expert in SAP. Thanx in Advance.

>
Dave Packard wrote:
> Good day, everyone!
> I would like to join the tables FMIFIIT and AUFK. The INNER JOIN will be done between FMIFIIT's MEASURE (Funded Program) field, which is char(24), and AUFK's AUFNR (Order Number) field, which is char(12).
>
> The problem I'm having is this: All of the values in AUFNR are preceeded by two zeros. For example, if I have a MEASURE value of '5200000017', the corresponding value in AUFNR is '005200000017'. Because I have my SQL statement coded to just match the two fields, I obviously get no records returned because, I assume, of those leading zeros.
> Dave
You can't do a join like this in SAP's open SQL. You could do it in real SQL ie EXEC.... ENDEXEC by using SUSBTR to strip off the leading zeros from AUFNR but this would not be a good idea because a) modifying a column in the WHERE clause will stop any index on that column being used and b) using real SQL rather than open SQL is really not something that should be encouraged for database portability reasons etc.
Forget about a database join and do it in two stages; get your AUFK data into an itab, strip off the leading zeros, and then use FAE to get the FMIFIIT data (or do it the other way round).
I do hope you've got an index on your FMIFIIT MEASURE field (we don't have one here); otherwise your SELECT could be slow if the table holds a lot of data.

NI: Please don't put illegal vi names in your toolkits, thanks

Http Standalone?.vi
Not An FTP Session?.vi
DoNIsEngineersKnowThatQuestionMarksInVINamesAreConsideredIllegalByTheABAPIAndWillBreakAppBuilds?.vi
These vi names with question marks will break a build. The ones I found were all part of the internet toolkit. Please don't do this anymore NI.
-Devin
I got 99 problems but 8.6 ain't one.

Bob_H. wrote:
Billings11, thanks for bringing this issue to our attention, my apologies for misunderstanding the original post. Travis and I went ahead and created a couple of bug reports on this issue (#120518, and 120633) to fix the internet toolkit VI names, as well as to look into a system to prevent occurrences like this from occurring again. Thanks again for reporting this to us.
Jon D, I am interested looking into your situation in more detail. Those file primitives (and others like "Search/Split String", "Get Date/Time String", etc...) shouldn't be actual files anywhere on the system (unless you are using the compatibility VI in the "_oldvers" llb which no longer does anything but return an error). Could you elaborate a little bit on the problem you experience with files of these names, and perhaps attach an example?
The problem was when I was printing the documentation for the VI as an HTML file. As part of the documentation, I would add the list of subVI's (Print->Print Contents->VI Documentation->List of SubVIs and Express VIs selected). When the HTML files were generated, if you looked at the HTML, where the Open/Create/Replace.vi would be listed in the subVI's list, would be a broken link, because no Open/Create/Replace.png coulld be created.
I do note that when I tried to replicate this with 8.5, that the Open/Create/Replace.vi doesn't cause a problem because it appears that primitives aren't added to the list of subVI's anymore with that print option.
Jon D
Certified LabVIEW Developer.

Spot healing brush - i have icon for healing brush - why not this one? Ps cc

i have Photoshop cc and watched a tutorial which uses the spot healing brush - the icon looks like an x made of arrows, you hover and it gives you choices. mine does not have the content aware move tool icon, only the brush. is there a way to turn it on?@

Can you please do a screen grab showing what choices you DO have?
If you truly don't have all the tools that are normally available in the position in the Tools panel, then you likely need to do a full removal and reinstallation. But please don't do this before showing what you see. It may be we can spot something else wrong.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-Noel

Preview very sluggish on MacBook Pro. Move a bar and the umbrella turns a few seconds. Any ideas? I don't want to update my iMac until this one is solved.

MacBook Pro with 4GB of memory and a 2.3 GHz Intel. No other program running other than Preview.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -type d -name *.app -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

PLEASE don't pass this one up!!!

Similar Messages

Maybe you are looking for