Please enable 1080p playback in Belle models

I'm a Nokia 701 owner over 6 months now. It is a great device in almost every aspect. But it puzzled me why it can't play 1080p videos when it's hardware is more than capable ( Broadcom's BCM2763 with Videocore 4 engine).  Was hoping the phone would get this functionality with FP1 update, but no.
Now, I paid quite an amount of money for this phone and I didn't go Galaxy S II way at the time (which is fully capable to play 1080p). Nokia 808 PV has the same hardware and no software restrictions for 1080p playback. It is clear that only someone's decision and software restriction is preventing 1080p playback on Nokias 603, 700 and 701. 
I respectfully request that the next software update allows the same 1080p playback on these devices as it is done on 808 PV.
PS.
Before someone says that 1080p or even 720p resolutions are an overkill on phone's display (in terms of picture size, they are), I'll state that I have a 32GB mSDHC card and a lot of 720p and 1080p videos 100MB-1.5GB that I want to watch on my phone (I often travel) without having to reencode them.

Welcome to the  Discussion Forums.
Generally speaking volume isn't controlled in that way, for example it isn't usual to be able to control the volume of a movie from a DVD player.
That being said  have implemented volume control for audio content through the tv, although it should be noted that the remote keys used to adjust audio are used for other purposes when the tv is playing video. I therefore think it unlikely that they have the ability to add volume control for video in the way you suggest.

Similar Messages

  • ITunes 10.6/Quicktime 7 1080p playback issue/frame skipping

    I have a playback issue with the 1080p videos on the recent version of iTunes - 10.6. I also tried playing the same videos on Quicktime where I was able to find that the videos were playing at around 20fps as opposed to their normal rate - 24fps~25fps.
    I seem to barely meet the 1080p playback requirements on iTunes, but I know that I'm able to watch 1080p videos on Window Media Player(WMP) 12 without any issues. Aside from WMP, I'm able to watch 1080p videos on Youtube whenever hardware acceleration is enabled. I assume that WMP utilizes hardware acceleration as well.
    The playback issue/frame skipping is probably caused by iTunes 10.6 not using hardware acceleration.
    Windows Hardware
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    To play Standard Definition video from the iTunes Store, an Intel Pentium D or faster processor, 512MB of RAM, and a DirectX 9.0-compatible video card is required
    To play 720p HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor, 1GB of RAM, and an Intel GMA X3000, ATI Radeon X1300, or NVIDIA GeForce 6150 or better is required
    To play 1080p HD video, a 2.4GHz Intel Core 2 Duo or faster processor, 2GB of RAM, and an Intel GMA X4500HD; ATI Radeon HD 2400; Nvidia GeForce 8300 GS or better is required
    Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
    16-bit sound card and speakers
    Broadband Internet connection to use the iTunes Store
    iTunes-compatible CD or DVD recorder to create audio CDs, MP3 CDs, or back-up CDs or DVDs
    My PC specs:
    Pentium Dual Core 2.3 Ghz
    2GB DDR3
    Intel GMA X4500MHD

    Bump!  Sounds the same as my problem, but maybe no one but us are having the issue since no one will answer any of my posts

  • N7K F1 TCAM limitations ("ERROR: Hardware programming failed. Reason: Tcam will be over used, please enable bank chaining and/or turn off atomic update")

    Platform/versions:
    # sh ver
      kickstart: version 6.2(2)
      system:    version 6.2(2)
    # sh mod
    Mod  Ports  Module-Type                         Model              Status
    1    32     10 Gbps Ethernet Module             N7K-M132XP-12      ok
    2    48     1000 Mbps Optical Ethernet Module   N7K-M148GS-11      ok
    3    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
    4    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
    5    0      Supervisor Module-1X                N7K-SUP1           ha-standby
    6    0      Supervisor Module-1X                N7K-SUP1           active *
    I recently tried to add a couple of "ip dhcp relay address" statements to an SVI and received the following error message:
    ERROR: Hardware programming failed. Reason: Tcam will be over used, please enable bank chaining and/or turn off atomic update
    Studying this page I was able to determine, that I seemed to be hitting a 50% TCAM utilization limit on the F1 modules, which prevented atomic updates:
    # show hardware access-list resource entries module 3
             ACL Hardware Resource Utilization (Module 3)
                              Instance  1, Ingress
    TCAM: 530 valid entries   494 free entries
    IPv6 TCAM: 8 valid entries   248 free entries
                              Used    Free    Percent
                                              Utilization
    TCAM                      530     494     51.75 
    I was able to workaround it be disabling atomic updates:
    hardware access-list update default-result permit
    no hardware access-list update atomic
    I understand, that with this config I am theoretically allowing ACL traffic during updates which shouldn't be allowed (alternately I could drop it), but that's not really my primary concern here.
    First of all I need to understand why adding DHCP relays are apparently affecting my TCAM entry resources?
    Second, I need to understand if there are other implications of disabling atomic updates, such as during ISSU?
    Third,  What are my options - if any - for planning the usage of the apparently relatively scarce resources on the F1 modules?

    Could be CSCua13121:
    Symptom:
    Host of certain Vlan will not get IP address from DHCP.
    Conditions:
    M1/F1 Chassis with Fabric Path Vlan with atomic update enable.
    On such system if configured SVI with DHCP is bounced that is if we shut down and bring it up may cause DHCP relay issue.
    Workaround:
    Disable Atomic update and bounce the Vlan. Disabling Atomic update may cause packet drops .
    Except that ought to be fixed in 6.2(2).

  • TS4207 "Please enable session cookies" Error from Sites. Safari 7.0/9537.71 on OSX 10.9

    Cant sign in to Macy's account. Site says, "Please enable session cookies". Checked Safari (Safari 7.0/9537.71) Preferences on OSX 10.9 - Under Privacy > Block Cookies and other website data > is set to "Never". I'm seeing the same problem in my iPad Mini (1st Gen) too. Please Advise.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Why can't I login to Firefox Accounts to set up Sync? FF30+ keeps telling me to Please enable cookies; cookies ARE enabled, already tried Safe Mode.

    Exactly what it says on the tin.
    Why can't I log-in to Firefox Accounts to set up Sync from my laptop PC? FF30+ keeps telling me to Please enable cookies; cookies ARE enabled, and I already tried Safe Mode. This has been happening ever since the new Sync was implemented, so I'm guessing around FF 30. I am now up to FF version 34 and it still isn't working. I have not been able to sync since the "update."
    Problem #1: Going to about:accounts and clicking on the blue Get Started button opens a blank screen. There isn't even a prompt about cookies. It's just blank. Screen shot attached.
    This is before add-ons are disabled. If they're disabled in Safe Mode, we go to Problem #2.
    Problem #2: I skimmed a thread (https://github.com/mozilla/fxa-content-server/issues/1017) and tried logging in to Sync through accounts.mozilla.com instead, but though the screen doesn't turn blank while add-ons are still enabled, the "Enable cookies" warning is as far as I can get. Going to about:accounts in Safe Mode has the same result. I have cleared all my cookies and my cache, restarted FF multiple times with and without add-ons enabled, and still nothing. I have browsed this support forum for similar questions, and while other people are having the same issue, none of the other threads have been resolved yet. Several FF versions later, this is way too long for this issue to still be unresolved.... Screen shot attached.
    I know where Firefox's cookie manager is located, and I have toggled all the settings. I even allowed third-party cookies (though I really shouldn't since they're pointless). No difference. Screen shot attached.
    I looked in about:config and searched for the word "cookie" in the names, but even doing that is pointless for me since I'm not a programmer and hence ignorant in what all these settings actually mean. Screen shot attached.
    I'm at the end of my rope here, guys. It's been months. A year. Maybe more than a year; I don't even know anymore. I just got a new device and I don't want to add all my Firefox information to it one-by-one. There doesn't seem to be any way to contact Mozilla directly, so.... Someone help, please....

    ''guigs2 [[#answer-672422|said]]''
    <blockquote>
    NoScript stops cookies, please disable this addon/extension as well as make sure that the language en-us is installed.
    # 1) Open up the Firefox Preferences tab. You can do this by typing about:preferences in the URL bar.
    # 2) Click "Content"
    # 3) Next to "Languages", click "Choose"
    # 4) Select "English/United States [en-us]", click "Add"
    # 5) re-open "about:accounts"
    # 6) Click "Get Started"
    </blockquote>
    Thank you for replying. Unfortunately, I already did all of these things. As you can see from the below screenshot, the language is already set. Also, this screenshot was taken in Safe Mode, so NoScript is not enabled. About:accounts still says I need to enable cookies for some reason. So, this solution didn't work....

  • I keep getting an error message that says "You need cookies to login to this site. Please enable cookies." I checked cookies and they're enabled. I went through and did what it said to fix errors like this and it still says that. How can I fix this?

    I am trying to login to a website and every time I go to login I get a message that says "You need cookies for this site. Please enable cookies." I've checked cookies and they're enabled, I even put that specific website on allow. I searched for information on how to correct this error and did all that it said, yet I still get this message.

    I have the exact same problem! With just one website. It's when I have a second account on it. I can sign in with my original (old) account, but not with my new account that I wish to sign in on. I've talked to a lot of people members of the website who have second accounts and this doesn't happen with them, it's only with my firefox. I've done everything I can to enable cookies, 3rd party cookies, no exceptions, etc.
    But it must be something to do with my computer because I did the same thing on Internet Explorer and Google Chrome and it's exactly the same. :/

  • ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css   Also:  "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course."  I have Java enabled in all browsers

    ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css    Command then fails
    Also:  "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course."  I have Java enabled in all browsers
    Thoughts?  Using Presenter 10  Win 8.1  Intel I7  new HP with plenty of memory
                   Thanks

    I had saved one copy as an .asp but then resaved it to .xhtml 
    I'm assuming this is a static web site.  Rename (F2) all your pages with .html or .htm extension. 
    .xhtml is not a valid extension.
    Nancy O.

  • Adobe Illustrator CC has stopped working. Please enable Verdana font(s) and relaunch Illustrator?

    What do i do when a warning box says: Adobe Illustrator CC has stopped working. Please enable Verdana font(s) and relaunch Illustrator?

    Laust,
    I just managed to find these threads, see especially post #22 in the former, which solves a really subtle variation of it:
    "Verdana missing" bug in illustrator CC on Mac
    Can't open Illustrator CC. Dialogue box appears with " Adobe illustrator has stopped working. Please enable Verdana font(s) and relaunch illustrator.

  • Hello my apple id its disabled i writed to apple email but they didnt activate it i dont know why its disabled please enable my apple

    hello i cant activate my iphone 5s i know my apple id and password but apple says me for security reason reset your password .i changed password but not working . my apple id its disabled for security reason please enable it i cant activate my iphone
    best regards

    This is a user to user forum.  Not Apple.  We are not able to assist you.  Use the "Contact Us" link at the bottom of this page.

  • "Error: Cookies are diabled. Please enable them and try again." Where do I go to find the cookies?

    When I go to Firefox, I get this message. "Error: Cookies are
    disabled. Please enable them and try again. Where do I go to enable the cookies?

    * Tools or Firefox > Options > Privacy > Firefox will: "Use custom settings for history" > Cookies
    Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
    * https://support.mozilla.com/kb/Cookies
    * https://support.mozilla.com/kb/Enabling+and+disabling+cookies

  • T410 i3, integrated graphics, 1080p playback

    Hey guys,
    Sorry if this seems to be a topic that pops up over and over on the internet. I've been digging around a lot and have failed to find any definite answers to this question. It seems like some review sites are saying that the T410 has no problem with 1080p playback but doesn't specify the exact specifications for the machines tested for video playback. There is also a guy on youtube who posted a video review of 720p and 1080p playback from a T410 i3 integrated and says that video playback was fine for 720 but choppy for 1080; however, when peopel recommended coreAVC, no response was given.
    Can anyone here give me their experience with 1080p playback with integrated graphics on a T410?
    And also another quick question, I'm aware that the displayport to hdmi will carry audio as well, but for the video, does it carry the raw HD content, or is it scaled down.
    Thanks very much indeed!

    1. The T410 with i3 CPU runs the 1080p playback fine, whether or not it is choppy depends on the quality of the encoding and what player is used. The integrated GPU is designed for hardware decoding of the 1080p videos in Blu-ray.
    2. The displayport will carry the specific video size that you specify in the windows. It can support WQXGA resolution. But if you specify the output to 1920 x 1080 then it would do so at that resolution. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • C2D 2.16 HD 1080P Playback

    Waiting for my C2D 2.16 still(finally upgrading). I have a question regarding the power of the new MBP's even the 2.16 if they can play HD 1080P quicktime files like the ones at the apple movie trailers. I owned a PB 1.6 17" before and it could not handle anything other than 480p. I also tried CD MPB and 1080p playback was choppy. Thanks.

    Playback may be smooth on the MBP display, but I should hope so, since no MBP can display it back natively (1080p = 1920x1080 resolution, 17" MBP = 1680x1050, 15" MBP = 1440x900).
    Whether or not the MBP C2D can display the full 1920x1080p via DVI to a fully capable 1080p set is another story.
    -edit-
    One thing I can relay from the dark side (PC/Win) is that the video card (GPU and RAM) played a larger part in the ability to play HD video than a slight speed bump in the processor (and I do view the CD to C2D as a speed bump and not a revolutionary step).
    I know the ATI x1600 is viewed as a pretty decent video card, but nowhere near top of the line. Maybe the 256MB flavor will play back HD video more smoothly than the 128MB, but that's just a guess.

  • "Java Script Disabled on your browser. Please Enable it."

    I tried to log-in to this site:
    "http://www.edudel.nic.in/mis/MisAdmin/frmMisLogin.aspx"
    but instead got this message:
    "Java Script Disabled on your browser. Please Enable it."
    I have already enabled JavaScript in settings, but it gives the same error. When I tried doing the same in Internet Explorer (v9), everything was working fine. Please tell me what to do.

    The problem is there's a glitch in the javascript of http://edudel.nic.in/mis/MisAdmin/frmMisLogin.aspx
    There's a form element with an ID of "txtpassword", but in their validation function, they call it with getElementById("txtPassword"). Obviously a case issue, but it apparently works in IE.
    I created a workaround for a user I met in #firefox, a simple greasemonkey script that replaces the function with a fixed version.
    Here's the link:
    http://userscripts.org/scripts/show/102156

  • Illustrator cc will not startup (please enable verdana font)

    When I try to start illustrator cc if says "illustrator has stopped working, please enable verdana font/s and relaunch illustrator. but it keep saying the same thing even though font is running.

    Thanks for your answer, I do notice the I have verdana OTF running but not seeing a version for TTF anywhere. My reason for mentioning that is that Illustrator cs6 is running with OTF version loaded and Illustrator CC was running before.
    Anyway before I try this solution can you tell me where to place this font once I download it as I noticed that you you said no font management. Would that be McIntoch HD/System/Fonts or what?

  • At event calendering site, getting message "There was a problem with your event submission. If you have disabled JavaScript please enable it and try your submission again." Javascript is ENABLED on my computer.

    I'm trying to submit an event to the events calendar at http://calendar.jtnews.net/events/index.php?com=submit. After I enter the Authentication words and press Enter, I get the message, "There was a problem with your event submission. If you have disabled JavaScript please enable it and try your submission again." According to my Firefox/Tools, etc., button, Javascript is enabled. I

    Hello mjswooosh,
    I'm very disheartened to hear that you've had ongoing problems when attempting to order from BestBuy.com. Our goal is ever to provide a fun and efficient shopping environment! Certainly creating aggravation serves neither you nor us and I apologize sincerely for this having been your experience.
    We recommend the troubleshooting steps you mentioned (i.e., clearing the browser cache, deleting temporary internet files and cookies) because this is the most common cause of this type of problem. I too have encountered this issue from time to time and these steps have almost always resolved the problem. I say almost always because there's one further step you can try: ensure that you have signed out of BestBuy.com, then perform the browser maintenance steps we've recommended. Afterward, before signing in to BestBuy.com, add your desired items to your cart and sign in as part of the checkout process. When the standard steps have not netted a resolution for me, this has solved the problem each time.
    I hope this helps. I'm very grateful that you took the time to write to us with your concerns and for sharing your very valuable feedback about your online experience.
    Sincerely,
    John|Social Media Specialist | Best Buy® Corporate
     Private Message

Maybe you are looking for

  • How to edit a post in Apple Support Comunities?

    If I just posted something and saw it had typos.   Is there any way to edit the post or remove it?  I have searched all over for an option to edit my post and see none.  I saw someone say that it was possible to edit within 15 minutes of making the p

  • Word saving documents as binary files- can't send documents as attachments

    I've had my Macbook for about 9 months. During the first 6 months, I could send attachments via email perfectly fine. After about 6 months, something happened and the files could no longer be opened after being attached. I tried sending some attachme

  • Playing Quicktime on TV.

    I have Quicktime Pro 7.1.3 and would like to know how to play an animated movie I've created, on TV via a DVD player. I've tried a few export formats,codecs etc. and then copied to CD or DVD without any luck. Can anybody help? G4   Mac OS X (10.4.8)

  • HT4628 buffering

    why does my macbookpro keep buffering

  • Using sql query

    I want to use sql query in interface mapping. how can i do that?