Please enable REST support in WEB-INF/conf/axis2.xml and WEB-INF/web.xml

Hi All,
we are not able to connect to Live office to our server . URL is not authenticated in Excel and if we place same url in browser ,we are getting below error message.
"Please enable REST support in WEB-INF/conf/axis2.xml and WEB-INF/web.xml"
we couldn't able to rest the same after changing settings in axis2 file also.
Any solution where we can configure in CMC or any files
Regards
Mahesh

Hi Mahesh,
As mentioned by Abhilasha, this is the expected behavior.
In order to validate you could place the following URL in the browser.
http://servername:portno/dswsbobje. you would see Tomcats home page which will display the list of Services.
As far as the Live office in Excel is concerned , If you are getting a yellow exclamation mark stating (Web service not correct) next to Session URL, try changing the servername to IPaddress of the server.
Eg: http://ipaddress:portno/dswsbobje/services/Session
While inserting the Session URL in the Live Office settings confirm the URL as per above.
If the issue still persists, you could configure the host file entry in you client machine.
Let me know if the information is helpful.
Regards,
Noopur

Similar Messages

What do I do now that Install says, "Installer failed to initialize. Please download Adobe Support advisor to detect the problem." and your web site says it is discontinued?

I am trying to install CS6. I down loaded it last week and am trying to install it now but it fails. What do I do now that Install says, "Installer failed to initialize. Please download Adobe Support advisor to detect the problem." and your web site says it is discontinued?

This page might help you
Creative Suite 6 Installation Instructions

How to enable REST

Dear all,
We are using Tomcat 5.520.
I start tomcat, and access the following URL
http://localhost:8080/dswsbobje/services/
It gives the result in explorer
Please enable REST support in WEB-INF/conf/axis2.xml and WEB-INF/web.xml
What is this error ?
How to resolve this error?
Kindly guide me da..
Regards,
skiruba

Hi,
I am also facing the same error message but with a bit different workflow.
What I am doing is I am trying to login into Live Office (BO Enterprise is 3.1) the url: https://<ServerName>:<Port>/dswsbobje/services/session
It comes up with the exclamation mark and does not allows to login. When I hover my mouse over that exclamation mark, it shows that the "underlaying connection is closed."
Now, when I use the same url in the browser, it gives me the error: "Please enable REST support in WEB-INF/conf/axis2.xml and WEB-INF/web.xml"
I tried checking the axis validation page (url: https://<ServerName>:<Port>/dswsbobje) and it askes for the validation, also when I go for the validation, it validates (reaches the Happy Axis page).
One Interesting thing is, the same url validates and allows login in QaaWS.
Please let me know if this can be resolved. Thanks in advance for your help.
Regards,
Shirish

HT201303 Why show this message in games application? "Please contact itunes support to complete this transaction"

Why show this message in games application? "Please contact itunes support to complete this transaction"

Click here and request assistance.
(70672)

I got this error message when I want to activate the CS6. The error message is "We are unable to validate this serial number for CS6 Design and web Premium. Please contact "Customer Support ""

I got this error message when I want to activate the CS6. The error message is "We are unable to validate this serial number for CS6 Design and web Premium. Please contact "Customer Support ""

Hi islandschool,
Please try the suggestion given in the link:- http://helpx.adobe.com/creative-suite/kb/unable-validate-serial-number-ccm.html
Regards,
Sarika

Bidirectional NLS support in web-enabled forms.

Is it possible to have bidirectional NLS support in web-enabled forms? That is, can a local user make any settings changes on their workstation that will make (e.g.) Hebrew right-justified for text fields? If this all depends on the environment varible NLS_LANG, then it is set on the AS server and not user-changeable. I know you can change direction programmatically, but it seems odd that it doesn't work automatically. P.S. We are running forms 6i with Application Server 6i on an 8i database. Thanks in advance.

Frank,
I am using calendar.pll sent to me by my friend. I will search on OTN if this utility is avaiable on it. If it is there also, then I will download it and test it again.
Thanks,
Kiran.
Vadivelan,
I am sending simple form and calendar.pll to your mail address. But, remember this works only in windows environment so far. I am finding the solution for Linux/Web.
Kiran.

Trying to buy, get "We're sorry, we have encountered an error processing this information. Please try submitting again later, or try using a different web browser. If the problem persists, please contact customer support."

trying to buy, get "We're sorry, we have encountered an error processing this information. Please try submitting again later, or try using a different web browser. If the problem persists, please contact customer support."

Moving this discussion to the Adobe Creative Cloud forum.
Cock please try a different web browser. If you continue to face difficulties then you can contact our support team directly at Get help with orders, refunds, and exchanges.

I am loading Magic Jack. The error message I get is "Session cookies have been disabled for your web browser. Please enable session cookies so you can register your device." I have followed you process several times. This advice doesn't work. Pls help

Session cookies have been disabled for your web browser.
Please enable session cookies so you can register your device.
The URL is not specified.

Session cookies have been disabled for your web browser.
Please enable session cookies so you can register your device.
The URL is not specified.

I am getting message "Sorry, your browser/program is not supported by Web Dynpro! " Please provide the solution

I am getting following message displayed, for one of the website.
"Sorry, your browser/program is not supported by Web Dynpro! "
Please provide the solution
Regards
Rajesh R Rakesh

Use a browser that is supported.

Why can't I login to Firefox Accounts to set up Sync? FF30+ keeps telling me to Please enable cookies; cookies ARE enabled, already tried Safe Mode.

Exactly what it says on the tin.
Why can't I log-in to Firefox Accounts to set up Sync from my laptop PC? FF30+ keeps telling me to Please enable cookies; cookies ARE enabled, and I already tried Safe Mode. This has been happening ever since the new Sync was implemented, so I'm guessing around FF 30. I am now up to FF version 34 and it still isn't working. I have not been able to sync since the "update."
Problem #1: Going to about:accounts and clicking on the blue Get Started button opens a blank screen. There isn't even a prompt about cookies. It's just blank. Screen shot attached.
This is before add-ons are disabled. If they're disabled in Safe Mode, we go to Problem #2.
Problem #2: I skimmed a thread (https://github.com/mozilla/fxa-content-server/issues/1017) and tried logging in to Sync through accounts.mozilla.com instead, but though the screen doesn't turn blank while add-ons are still enabled, the "Enable cookies" warning is as far as I can get. Going to about:accounts in Safe Mode has the same result. I have cleared all my cookies and my cache, restarted FF multiple times with and without add-ons enabled, and still nothing. I have browsed this support forum for similar questions, and while other people are having the same issue, none of the other threads have been resolved yet. Several FF versions later, this is way too long for this issue to still be unresolved.... Screen shot attached.
I know where Firefox's cookie manager is located, and I have toggled all the settings. I even allowed third-party cookies (though I really shouldn't since they're pointless). No difference. Screen shot attached.
I looked in about:config and searched for the word "cookie" in the names, but even doing that is pointless for me since I'm not a programmer and hence ignorant in what all these settings actually mean. Screen shot attached.
I'm at the end of my rope here, guys. It's been months. A year. Maybe more than a year; I don't even know anymore. I just got a new device and I don't want to add all my Firefox information to it one-by-one. There doesn't seem to be any way to contact Mozilla directly, so.... Someone help, please....

''guigs2 [[#answer-672422|said]]''
<blockquote>
NoScript stops cookies, please disable this addon/extension as well as make sure that the language en-us is installed.
# 1) Open up the Firefox Preferences tab. You can do this by typing about:preferences in the URL bar.
# 2) Click "Content"
# 3) Next to "Languages", click "Choose"
# 4) Select "English/United States [en-us]", click "Add"
# 5) re-open "about:accounts"
# 6) Click "Get Started"
</blockquote>
Thank you for replying. Unfortunately, I already did all of these things. As you can see from the below screenshot, the language is already set. Also, this screenshot was taken in Safe Mode, so NoScript is not enabled. About:accounts still says I need to enable cookies for some reason. So, this solution didn't work....

ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css   Also: "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course." I have Java enabled in all browsers

ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css    Command then fails
Also: "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course." I have Java enabled in all browsers
Thoughts? Using Presenter 10 Win 8.1 Intel I7 new HP with plenty of memory
               Thanks

I had saved one copy as an .asp but then resaved it to .xhtml
I'm assuming this is a static web site. Rename (F2) all your pages with .html or .htm extension.
.xhtml is not a valid extension.
Nancy O.

Does Firefox 3.6.8 on Mac OS X 10.6.4 support Juno Web Mail "new message center" display?

Does Firefox 3.6.8 on Mac OS X 10.6.4 support Juno Web Mail "new message center" display?
== URL of affected sites ==
http://webmaila.juno.com/webmail

Does this only occur with 10.6.8? I just gave this a try on my 10.8.3 system with AIR 3.6 but couldn't reproduce the crash on quit. However, I also was unable to log into the application due to lack of credentials. Could you please open a bug on this over at bugbase.adobe.com? If we need to log in to reproduce the bug, please send any test credentials to [email protected] Once the bug has been entered, please let me know the bug number so I can attach the symbolicated crash log to the bug report.
Thanks,
Chris
Ps. If you haven't already, can you also try out our 3.7 beta build?
3/26/2013 - AIR 3.7.0.1410 Runtime and SDK Beta

Exposing an RFC enabled function as a Web Service in Minisap

Hi all,
i'm trying to expose an RFC enabled function as a Web Service in my Minisap installation. Everything works fine, until i actually want to finish the Web Service wizard. It always quotes that the object can only be deployed in an sap paket. If i try to put it in the $TMP paket, by marking it as a local object, i always get the message that test objects can not be deployed in external pakets.
Any idea?
Furthermore the virtual interface with the name i selected in the Web Service wizard seems to exist, at least i can not try to deploy the Web Service again with the same name. Actually, i also can't find a place where i can delete the virtual interface. Any hint on that issue is also appreciated.
Thanks in advance!
/Marc

I wanted to write a web service adapter:
@WebService
public class MyWebService implements StreamSender {
     private StreamSender eventSender;
     @WebMethod
     public void echo(String msg) {
          eventSender.sendInsertEvent(new MyEvent(msg));
After deploying I've got NullPointerException, eventSender is null. This is because MyWebService instance is NOT on the spring context, since it was created by jetty via reflection.
So now I'm trying another approach. I want to inject an adapter from the spring context into the web service:
I wanted to write a web service adapter:
@WebService
public class MyWebService {
     private MyWSAdapter myAdapter;
     @Resource
     private WebServiceContext context;
     @WebMethod
     public void echo(String msg) {
          myAdapter = getMyAdapterFromSpringContext();
          myAdapter.sendInsertEvent(new MyEvent(msg));
     public MyWSAdapter getMyAdapterFromSpringContext() {
          ServletContext sc = (ServletContext) context.getMessageContext().get(MessageContext.SERVLET_CONTEXT);
          ApplicationContext springContext = WebApplicationContextUtils.getWebApplicationContext(sc);
          return (MyWSAdapter) springContext.getBean("myWSAdapter");
So far i'm getting java.lang.NoClassDefFoundError for org.springframework.web.context.support.WebApplicationContextUtils (org.springframework.spring-web_2.5.6.jar), and trying to figure out where is the jetty classpath.

"Error: Cookies are diabled. Please enable them and try again." Where do I go to find the cookies?

When I go to Firefox, I get this message. "Error: Cookies are
disabled. Please enable them and try again. Where do I go to enable the cookies?

* Tools or Firefox > Options > Privacy > Firefox will: "Use custom settings for history" > Cookies
Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
* https://support.mozilla.com/kb/Cookies
* https://support.mozilla.com/kb/Enabling+and+disabling+cookies

Enable lazy-loading for web dynpro ?

Hi,
i have an oss message opened, where i got the following message:
If you wish to change the start-up mode or enable lazy-loading,
these can be configured.
Please go to Windows->Preferences->Web Dynpro
and you can set the lazy loading or other start-up modes here
which will be then configured by default in your application-j2ee-engine.xml.
Please see attached snapshot.
Best Regards,
Vidya
what does he mean by 'windows->preferences->Web Dynpro' ??? WHERE do i have
to do this !
best regards, Martin

Hi Martin,
You have to change these setting in SAP Netweaver Developer Studio, when you open SAP Netweaver Developer Studio, you will have a Windows tab on the Top level Navigation, open that and Choose Preferences, and finally Choose "WebDynpro"..and make the changes..
Hope this helps,
Regards,
Shailesh Nagar
Edited by: Shailesh Kumar Nagar on Feb 25, 2008 10:30 AM

Please enable REST support in WEB-INF/conf/axis2.xml and WEB-INF/web.xml

Similar Messages

Maybe you are looking for