Please Explain How iCloud Works With Photos.

I understand that when you take a photo on an iOS device it is stored in iCloud.
How exactly does that happen?  Does the photo go to iPhoto then to iCloud?  Where would I find it in iCloud?
Has my iPhoto library gone to iCloud?  If so, where will I find it other than on my iMac?
This is part of iCloud which I do not understand!

Hi Julian,
When you take a photo from an iOS device (with iCloud configured), it will automatically sync/"push" that photo into iCloud when that iOS device is connected to WiFi. It cannot sync over a 3G data connection so far as I know. iCloud will store a 30 day running history of photos, or 1,000 photos from iOS devices (whichever comes first).
In order to access these photos on your Mac, you need to open iPhoto and click on "Photo Stream." From iPhoto, you will need to sign into your iCloud account (Apple ID and password). Once complete, whenever your Mac is connected to WiFi, iPhoto will automatically download all of your photos from iCloud and store them locally in a photo album for editing, etc.

Similar Messages

  • Could you please explain how to work with Outlier Correction

    could you please explain how to work with Outlier Correction

    Hi sr,
    Actually an outlier correction is an historical value that lies the tolerance lane.
    the apo sys calculate this tolerance lane on the basis of the sigma factor.
    It then correct any historical value that lies outside the upper or lower band of this tolerance lane.
    So, that it corresponds to the calculated ex- post value for that point in time.
    this option is available in Master forecast profile /sapapo/mc96b in Univariate profile( control parameters) tab.
    If you have set the outlier correction indicator, then the sys first calculate an ex-post forecast with the selected forecasting techniques.
    In the next step, the sys calculates a tolerance threshold T.
    where T is calculated as T = sigma * MAD (Mean Absolute Deviation)
    Here the Sigma factor defines the width of the tolerance rangefor automatic outlier correction.
    it defines the permissible number of standard deviations.
    A small sigma factor means a low tolerance, and a large number of outliers that are detected and corrected.
    The default Sigma factor is 1.25.
    If you set the Sigma factor, SAP recommends that you set it betw 0.6 and 2.
    I hope this is helpful for you.
    Regards,
    Pullaiah

  • Confused how iCloud works with Preview?

    What is the point of saving PDFs in the iCloud with Preview if I cannot access those documents via my iOS devices or iCloud.com? Or can I?

    To help others out there.. I too have not been able to figure out how to share iCloud Preview files across  OSX and iOS devices. Based on this post and other research I do not think it is currently possible (even with paid icloud subscriptions).
    But what you can  do..with iCloud Preview  is  share files,  across Mac's (OSX muntain lion or newer, laptops and desktops)  and signed into icloud account on both Macs . Can even create sub folders for files and  not limited to PDF files can also share JPG, DOC , XLS and other files .. ( This can be  helpful since  iMac's (pre 2009 tcan not use air drop)
    Perhaps apple will put a preview App out at some point to enable more seemless sharing across devices similar to DropBox which can also appear as a folder icon on the sidebar in Finder window.
    (FYI - I have up to date OSX (10.8.5 mountain lion ) and iOS7 (iPhone5) as well as paid icloud and itunes match subscriptions and even icloud beta pages/numbers/keynote. )

  • Can anyone explain how this works (vlans and bridge groups)

    Can someone please explain how this works...I have started to have problems but nothing changed. My problems are vlan1 and 1000 getting blocked on the switchport where the root bridge is attached.
    ROOT BRIDGE:
    ssid state
    station-role root bridge
    rts threshold 4000
    concatenation
    interface Dot11Radio0.1
    encapsulation dot1Q 1 native
    no ip route-cache
    no snmp trap link-status
    bridge-group 1
    bridge-group 1 spanning-disabled
    interface Dot11Radio0.911
    encapsulation dot1Q 911
    no ip route-cache
    no snmp trap link-status
    bridge-group 5
    interface Dot11Radio0.1000
    encapsulation dot1Q 1000
    no ip route-cache
    no snmp trap link-status
    bridge-group 2
    bridge-group 2 spanning-disabled
    interface Dot11Radio0.2001
    encapsulation dot1Q 2001
    no ip route-cache
    no snmp trap link-status
    bridge-group 253
    bridge-group 253 spanning-disabled
    interface Dot11Radio0.2120
    encapsulation dot1Q 2120
    no ip route-cache
    no snmp trap link-status
    bridge-group 7
    interface Dot11Radio0.2330
    encapsulation dot1Q 2330
    no ip route-cache
    no snmp trap link-status
    bridge-group 3
    bridge-group 3 spanning-disabled
    interface Dot11Radio0.2336
    encapsulation dot1Q 2336
    no ip route-cache
    no snmp trap link-status
    bridge-group 4
    interface Dot11Radio0.2350
    encapsulation dot1Q 2350
    no ip route-cache
    no snmp trap link-status
    bridge-group 6
    interface Dot11Radio0.2901
    encapsulation dot1Q 2901
    no ip route-cache
    no snmp trap link-status
    bridge-group 255
    bridge-group 255 spanning-disabled
    interface Dot11Radio0.2902
    encapsulation dot1Q 2902
    no ip route-cache
    no snmp trap link-status
    bridge-group 254
    bridge-group 254 spanning-disabled
    interface FastEthernet0
    no ip address
    no ip route-cache
    interface FastEthernet0.1
    encapsulation dot1Q 1
    no ip route-cache
    no snmp trap link-status
    interface FastEthernet0.911
    encapsulation dot1Q 911
    no ip route-cache
    no snmp trap link-status
    bridge-group 5
    interface FastEthernet0.1000
    encapsulation dot1Q 1000 native
    ip address 10.0.32.10 255.255.255.0
    no ip route-cache
    no snmp trap link-status
    bridge-group 1
    interface FastEthernet0.2001
    encapsulation dot1Q 2001
    no ip route-cache
    no snmp trap link-status
    bridge-group 253
    bridge-group 253 spanning-disabled
    interface FastEthernet0.2120
    encapsulation dot1Q 2120
    no ip route-cache
    no snmp trap link-status
    bridge-group 7
    interface FastEthernet0.2330
    encapsulation dot1Q 2330
    no ip route-cache
    no snmp trap link-status
    bridge-group 3
    interface FastEthernet0.2336
    encapsulation dot1Q 2336
    no ip route-cache
    no snmp trap link-status
    bridge-group 4
    interface FastEthernet0.2350
    description 81 River Rd - Labor
    encapsulation dot1Q 2350
    no ip route-cache
    no snmp trap link-status
    bridge-group 6
    interface FastEthernet0.2901
    encapsulation dot1Q 2901
    no ip route-cache
    no snmp trap link-status
    bridge-group 255
    bridge-group 255 spanning-disabled
    interface FastEthernet0.2902
    encapsulation dot1Q 2902
    no ip route-cache
    no snmp trap link-status
    bridge-group 254
    bridge-group 254 spanning-disabled
    interface BVI1
    ip address 10.0.32.10 255.255.255.0
    no ip route-cache
    ip default-gateway 10.0.32.1

    NON-ROOT BRIDGE#2:
    ssid state
    station-role non-root bridge
    rts threshold 4000
    concatenation
    infrastructure-client
    interface Dot11Radio0.1
    encapsulation dot1Q 1 native
    no ip route-cache
    bridge-group 1
    bridge-group 1 spanning-disabled
    interface Dot11Radio0.1000
    encapsulation dot1Q 1000
    no ip route-cache
    bridge-group 254
    bridge-group 254 spanning-disabled
    interface Dot11Radio0.2001
    encapsulation dot1Q 2001
    no ip route-cache
    bridge-group 252
    bridge-group 252 spanning-disabled
    interface Dot11Radio0.2336
    encapsulation dot1Q 2336
    no ip route-cache
    bridge-group 251
    bridge-group 251 spanning-disabled
    interface Dot11Radio0.2901
    encapsulation dot1Q 2901
    no ip route-cache
    bridge-group 253
    bridge-group 253 spanning-disabled
    interface Dot11Radio0.2902
    encapsulation dot1Q 2902
    no ip route-cache
    bridge-group 255
    bridge-group 255 spanning-disabled
    interface FastEthernet0
    no ip address
    no ip route-cache
    hold-queue 80 in
    interface FastEthernet0.1000
    encapsulation dot1Q 1000 native
    no ip route-cache
    bridge-group 1
    interface FastEthernet0.2001
    encapsulation dot1Q 2001
    no ip route-cache
    bridge-group 252
    bridge-group 252 spanning-disabled
    interface FastEthernet0.2336
    encapsulation dot1Q 2336
    no ip route-cache
    bridge-group 251
    bridge-group 251 spanning-disabled
    interface FastEthernet0.2901
    encapsulation dot1Q 2901
    no ip route-cache
    bridge-group 253
    bridge-group 253 spanning-disabled
    interface FastEthernet0.2902
    encapsulation dot1Q 2902
    no ip route-cache
    bridge-group 255
    bridge-group 255 spanning-disabled
    interface BVI1
    ip address 10.0.32.11 255.255.255.0
    no ip route-cache
    ip default-gateway 10.0.32.1

  • I am having email problems with the new Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help

    I am having email problems with the new Mountain Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help
    Incoming Mail (IMAP) Server - requires SSL:
    imap.gmail.com
    Use SSL: Yes
    Port: 993
    Outgoing Mail (SMTP) Server - requires TLS:
    smtp.gmail.com (use authentication)
    Use Authentication: Yes
    Use STARTTLS: Yes (some clients call this SSL)
    Port: 465 or 587
    Account Name:
    your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
    Email Address:
    your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
    Password:
    your Gmail password
    The Quick Answer
    Follow the instructions below to set up IMAP1 access in most email clients.
    Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
    this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option?  The next page under ADVANCED: THERE IS A BOX SSL MARKED.  Then IMAP Path Prefix - I put stmp.gmail.com.. is that right?  Port 993 can  use this one? as 456 doesn't work and 587 said it wasn't safe.  Under AUTHENTICATION I used PASSWORD.  Should I have used external client cert TLS?
    Please help me set this up securely. Thanks

    Apple - Support - Mail Setup Assistant

  • Can u explain me how to work with OOPs ABAP

    Hi,
    Can u explain me how to work with OOPS Abap,  If possible pls send me some sample programs regarding OOps concept used in Realtime.
    Thanks.

    hii,
    Please check this online document (starting page 1291).
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
    Also check this links as well.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    http://www.futureobjects.de/content/intro_oo_e.html
    http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
    /people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
    What is Object Orientation?
    Object orientation (OO), or to be more precise, object-oriented programming, is a problem-solving method in which the software solution reflects objects in the real world.
    A comprehensive introduction to object orientation as a whole would go far beyond the limits of this introduction to ABAP Objects. This documentation introduces a selection of terms that are used universally in object orientation and also occur in ABAP Objects. In subsequent sections, it goes on to discuss in more detail how these terms are used in ABAP Objects. The end of this section contains a list of further reading, with a selection of titles about object orientation.
    Objects
    An object is a section of source code that contains data and provides services. The data forms the attributes of the object. The services are known as methods (also known as operations or functions). Typically, methods operate on private data (the attributes, or state of the object), which is only visible to the methods of the object. Thus the attributes of an object cannot be changed directly by the user, but only by the methods of the object. This guarantees the internal consistency of the object.
    Classes
    Classes describe objects. From a technical point of view, objects are runtime instances of a class. In theory, you can create any number of objects based on a single class. Each instance (object) of a class has a unique identity and its own set of values for its attributes.
    Object References
    In a program, you identify and address objects using unique object references. Object references allow you to access the attributes and methods of an object.
    In object-oriented programming, objects usually have the following properties:
    Encapsulation
    Objects restrict the visibility of their resources (attributes and methods) to other users. Every object has an interface, which determines how other objects can interact with it. The implementation of the object is encapsulated, that is, invisible outside the object itself.
    Polymorphism
    Identical (identically-named) methods behave differently in different classes. Object-oriented programming contains constructions called interfaces. They enable you to address methods with the same name in different objects. Although the form of address is always the same, the implementation of the method is specific to a particular class.
    Inheritance
    You can use an existing class to derive a new class. Derived classes inherit the data and methods of the superclass. However, they can overwrite existing methods, and also add new ones.
    Uses of Object Orientation
    Below are some of the advantages of object-oriented programming:
    Complex software systems become easier to understand, since object-oriented structuring provides a closer representation of reality than other programming techniques.
    In a well-designed object-oriented system, it should be possible to implement changes at class level, without having to make alterations at other points in the system. This reduces the overall amount of maintenance required.
    Through polymorphism and inheritance, object-oriented programming allows you to reuse individual components.
    In an object-oriented system, the amount of work involved in revising and maintaining the system is reduced, since many problems can be detected and corrected in the design phase.
    Achieving these goals requires:
    Object-oriented programming languages
    Object-oriented programming techniques do not necessarily depend on object-oriented programming languages. However, the efficiency of object-oriented programming depends directly on how object-oriented language techniques are implemented in the system kernel.
    Object-oriented tools
    Object-oriented tools allow you to create object-oriented programs in object-oriented languages. They allow you to model and store development objects and the relationships between them.
    Object-oriented modeling
    The object-orientation modeling of a software system is the most important, most time-consuming, and most difficult requirement for attaining the above goals. Object-oriented design involves more than just object-oriented programming, and provides logical advantages that are independent of the actual implementation
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.geocities.com/victorav15/sapr3/abap_ood.html
    http://www.brabandt.de/html/abap_oo.html
    Check this cool weblog:
    /people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
    /people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
    /people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
    /people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
    /people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
    http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    http://www.allsaplinks.com/
    http://www.sap-img.com/
    http://www.sapgenie.com/
    http://help.sap.com
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.sapgenie.com/abap/controls/index.htm
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    these links
    http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
    For funtion module to class
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
    for classes
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
    for methods
    http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
    for inheritance
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
    for interfaces
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
    For basic stuff......
    abap oops
    http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
    http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
    http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/frameset.htm
    ABAP Business Development and Service Provisioning/ABAP Objects
    General information
    What is Object Orientation?
    some blogs
    A small tip for the beginners in OO ABAP
    Object Oriented ABAP (OO-ABAP)
    and others wiki OO Abap
    cheers,
    sharad
    Edited by: sharad narayan on Apr 29, 2008 12:19 PM

  • In Pages 09 we can do Mail Merge and Import Styles from a document. Can someone please explain how we can do this with the new version of Pages 5.1. Even Apple solutions are only valid for Pages Version 09. What a DOWN GRADE!

    In Pages 09 we can do Mail Merge and Import Styles from a document. Can someone please explain how we can do this with the new version of Pages 5.1. Even Apple solutions are only valid for Pages Version 09. What a DOWN GRADE! Thank god Pages 09 is still there.

    …and the other 98 missing features.
    Just use Pages '09, which should be in your Applications/iWork folder.
    Rate/review Pages 5 in the App Store.
    Peter

  • Please explain how the method CHECK_CHANGED_DATA works?

    Hi experts,
       Can any of you experts please explain how the method <b>CHECK_CHANGED_DATA</b>
    of <b>CL_GUI_ALV_GRID</b> class works ?
    Thanks in advance
    regards,
    Ashwin

    DATA: l_valid TYPE c.
    Data grid1 type ref to cl_gui_alv_grid.
    CALL METHOD grid1->check_changed_data IMPORTING e_valid = l_valid.
    This method checks if any data is changed on the grid if there any editable fields .
    And updates the changed values
    Message was edited by:
            Chandrasekhar Jagarlamudi

  • I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

    I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

    "iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is required for accessing email, contacts, and calendars). Some features require a Wi-Fi connection. Some features are not available in all countries. Access to some services is limited to 10 devices."
    From here >  http://www.apple.com/icloud/

  • Hi guys, can you please explain how to perform automatic system scan with CleanApp - it looks like it wants me to manually chose files to delete and I just want an automatic scan (like cleanmymac does)

    Hi guys, can you please explain how to perform automatic system scan with CleanApp - it looks like it wants me to manually chose files to delete and I just want an automatic scan (like cleanmymac does)

    Slowness...First Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
      You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
      After that Repair Permissions. No need to report Permissions errors....we all get them.
    Here's Freeing up Disk Space.
    DALE

  • I have a Powerbook G4 (don't laugh) with iPhoto '08. How does iCloud work with my computer. I have a iPhone 4 that has iCloud.

    I have a Powerbook G4 (don't laugh) with iPhoto '08. How does iCloud work with my computer. I have a iPhone 4 that has iCloud. Is iCloud pushing my phone's PhotoStream to my computer if it doesn't have the latest OS? Thanks so much for whoever can help!

    iCloud will not work with your computer because iCloud requires Lion. Lion requires an Intel Core 2 Duo processor or better. For you to have iCloud and PhotoStream you would need to buy a newer Mac Intel model meeting the requirements for Lion:
    Lion System Requirements
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Some features require an Apple ID; terms apply.

  • Hi there, i have Q i have excel file it need to be block with password. Could you please explain how i make password protect to Excel document

    Hi there,
    i have Q i have excel file it need to be block with password. Could you please explain how i make password protect to Excel document
    Thanks

    On the File menu, click Save As.
    On the Tools menu, click General Options.
    Do either or both of the following:
    If you want users to enter a password before they can view the workbook, type a password in the Password to open box, and then click OK.
    If you want users to enter a password before they can save changes to the workbook, type a password in the Password to modify box.
    NOTE   Unlike passwords you specify in the Password to open box, passwords you specify in the Password to modify box are not encrypted. These passwords are only meant to give specific users permission to modify workbook data. For optimal password security, it's best to assign both passwords. An encrypted password to access the workbook, and one to provide specific users with permission to modify its content. IMPORTANT   Use strong passwords that combine uppercase and lowercase letters, numbers, and symbols. Weak passwords don't mix these elements. Strong password: Y6dh!et5. Weak password: House27. Use a strong password that you can remember so that you don't have to write it down.
    If you want to use a different encryption type, click Advanced, click the type you want in the Choose an encryption type list, and then click OK.
    If needed, specify the number of characters you want in the Choose a key length box.
    NOTE   Document property encryption is enabled by default for most encryption types and providers. It prevents unauthorized users from viewing summary and custom file properties (such as the author or any custom file information) in theProperties dialog box. When users right-click the password-protected file, and then click Properties, information won't be available on the Summary tab and Customtab. Authorized users, however, can open the file and view all file properties (Filemenu, Properties command). To disable document property encryption, clear theEncrypt document properties check box.
    Click OK.
    When prompted, retype your passwords to confirm them.
    Click Save.
    If prompted, click Yes to replace the existing workbook.
    NOTE   You can also secure a workbook with a password on the Security tab of the Options dialog box (Tools menu, Options command).

  • How icloud works ?

    I have 2 questions as i don't quite understand how icloud works. (1) Is there a way of seeing what is backed up on i-cloud or do you just assume it is working?  If i lost my phone, could someone delete my icloud account and lose all of my data ?

    If turned on, iCloud will keep your contacts, calendars, notes, etc, on a server (similar to MS Exchange) allowing you to keep the content in sync with other devices (iPhone, iPad, iPod touch, Mac or even PC).  Those are not part of the iCloud "backup".
    From HT4859:
    You get 5 GB of free iCloud storage for:
    Photos and videos in the Camera Roll
    Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
    App data
    Home screen and app organization
    Messages (iMessage, SMS, and MMS)
    Ringtones
    Visual Voicemails
    You can select which applications back up their data and see how much storage space each application is using:
    On your Home Screen, tap Settings
    Tap iCloud
    Tap Storage & Backup
    Tap Manage Storage
    Select the device you want to manage
    http://support.apple.com/kb/HT4859

  • How to work with DTR  and CBS?

    Hi
    I have designed one web dynpro application. Now I want to work on this application through DTR. Means i want to do versioning and all. How to work with DTR..? I have gone through lot of blogs and help available in SDN but i am unable to understand how to work with it.
    One more thing how to work with CBS. How to configure CBS. I have NWDS latest version 7.0.7. In window perspective i am unable to find JDI. can any one please explain me if u have worked on this with example
    If possible can any one send me the screen shots how to work with these ?
    Best Regards
    Ravi Shankar B

    Hi Ravi
    For you to work with DTR and CBS, firstly u will have to configure JDI on server.
    To configure the NWDI, please go through the links given below:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/07/f6bc3d42f46c33e10000000a11405a/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/71/0369404c65587ee10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/26b84d6c823f66e10000000a11466f/frameset.htm
    In Nutshell, following steps will be performed:
    1) logon to Portal Devinf.
    2) click on CMS
    3) Go to landscape configurator
    4) create domain
    5) create tracks and add Software components in that track
    6) runtime systems ( dev/qa etc are configured
    7) in the transport studio, all the files listed are checked in through check - in tab.
    8) they move to developement tab.
    Once all these things are done, in your NWDS:
    1) Setting the devbox host name and server port in Window -> Preferences -> SAP
    J2EE Engine
    2) Setting Portal URL in Window -> Preferences -> JDI -> DC Pool and ping server,
    to check whether server is getting accessed from NWDS.
    3) Once server is set, login to DTR and go to DTR perspective. Create a client there, by doing a right click and filling up the required details.
    4) In the DC perspective, in the Local DCs view, perform import configuration.
    5) the dev track is not configured
    6) Under this, after logging into DTR, now you can create your project, check them in and create new versions.
    Thanks & regards,
    Anupreet

  • Lightroom 3 Error Working With Photos That Work With Other Apps

    My Setup:
    Lightroom 3.3 for Mac
    iMac OS X 10.6.6
    The problem:
    Lightroom is unable to work with photos it used to be able to work with. In the Library Module I get the error message "There was an error working with the photo." In the Develop Module I get the message "The file appears to be unsupported or damaged."
    Now I know the photos are ok because I can view them in other apps including Photoshop CS5
    And these photos used to work in Lightroom.
    I am suspicious it has something to do with Picasa, which I use to catalog faces. I have compared the exif data and the photos that don't work have an extra value called "Image Unique Id" and it appears to be a long hexadecimal number.  Also, the software version has been modified to indicate "Picasa".
    It bothers me that a world class product like LIghtroom is not robust enough to work on these files when everything else I have tried does work.  The problem is LIghtroom is the primary tool in my workflow.
    So has anybody seen this and know of a way to fix it?

    @Pete -
    Thanks for the feedback, but my I think my concern is valid.  Whatever Picasa is doing to the photo other apps like Apple Preview and CS5 can deal with it.  Lightroom cannot.  I am not explicitly modifying the files in Picasa just using Picasa to catalogue the faces.  So yes, I will quit using Picasa, but I still have hundreds (if not thousands) of photos that can no longer be processed by Lightroom and I need guidance on how to best recover these photos.
    I didn't know whether the Image Unique Id is standard or not, but I do know it does not show up in the files that work, only in the files that do not work.  I just assumed that it was non-standard because I did not see it on functioning files.
    Also, I would argue that Lightroom should be better able to handle this kind of situation instead of just not working.  Thanks again.

Maybe you are looking for