Please explain the OS on Cbeyond
I saw posted on another site that..."Just found an official os 4.7.1.65 for Tour from CBEYOND" . I am not new to BB but, my understanding is that an OS is only official when released by RIM and or your carrier. So I went to the Verizon site as well as hooked up to the DM and neither shows an OS update after the 11-19 release. To me, this means that whatever this so called new OS is, it is not official. So I posted asking for clarification on this other site and basically got flamed and in other words was told I was an **bleep**.
Would someone care to explain this to me? Also, part of the response I got from the OP was "All OS's are official releases from RIM whether or not a particular carrier decides to distribute it to its customers." But, if ALL, as he stated, were official why would we have leaks that (at least my carrier) says will void the warranty if I load it onto my phone before they have officially released it?
Solved!
Go to Solution.
Hi there!
Well, how you were treated on Cbeyond is not something that we can really address...but we can talk about the rest.
RIM indeed releases numerous OS's to the carriers...some better than others. But, it is the carriers who are in control of declaring a release as "official"...since they must provide support, it is up to them to decide what they will adopt and, therefore, support. And each carrier controls their supported versions for their particular customers. Hence, you will find that different carriers are on different "most recent" versions even for the exact same model BB.
Many times, a version that has been released by RIM sneaks past the carriers...these are the leaks. Are they intentional? Who knows...but we do know that they are out there and that many decide to use them. This often has a side benefit of providing very valuable feedback concerning a particular release level.
As to warranty voiding -- this is a common myth. Using a leaked version does not void your warranty -- however, your carrier may decide to not provide you support until you downgrade to their supported version. They are pretty much within their rights to enforce that. The best practice is to never reveal to your carrier that you have used an unsupported device OS version...and, when you do fall back to their supported version, if the behavior that you sought support for still exists, then you will be completely within your contractual rights to seek that support.
Hope that helps clear some of it up for you!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Please explain, the job of the "ASSIGN COMPONENT ".
Please read this popular example appended below. I am newbie to ABAP.
At the end of the execution the code is printing 33. Don't get it.
Please explain, the job of the "ASSIGN COMPONENT ". How or why it is printing value 33. What is the meaning of the statement, "ASSIGN COMPONENT <F2> OF STRUCTURE <F1> TO <F3>." ?
DATA: BEGIN OF LINE,
COL1 TYPE I VALUE '11',
COL2 TYPE I VALUE '22',
COL3 TYPE I VALUE '33',
END OF LINE.
DATA COMP(5) VALUE 'COL3'.
FIELD-SYMBOLS: <F1>, <F2>, <F3>.
ASSIGN LINE TO <F1>.
ASSIGN COMP TO <F2>.
DO 3 TIMES.
ASSIGN COMPONENT SY-INDEX OF STRUCTURE <F1> TO <F3>.
WRITE <F3>.
ENDDO.
ASSIGN COMPONENT <F2> OF STRUCTURE <F1> TO <F3>.
WRITE / <F3>.
11 22 33
33DATA: BEGIN OF LINE,
COL1 TYPE I VALUE '11',
COL2 TYPE I VALUE '22',
COL3 TYPE I VALUE '33',
END OF LINE.
DATA COMP(5) VALUE 'COL3'.
FIELD-SYMBOLS: <F1>, <F2>, <F3>.
ASSIGN LINE TO <F1>.
ASSIGN COMP TO <F2>. "here you are assigning the column name which is COL3 to <f2>.
DO 3 TIMES.
ASSIGN COMPONENT SY-INDEX OF STRUCTURE <F1> TO <F3>.
WRITE <F3>.
ENDDO.
ASSIGN COMPONENT <F2> OF STRUCTURE <F1> TO <F3>.
ASSIGN 'COL3' of structure <f1> to <f3>. "it is equal to above statement.
WRITE / <F3>.
11 22 33
33
ASSIGN COMPONENT <F2> OF STRUCTURE <F1> TO <F3>. means
assigining COL3 value of the structure <f1> to <f3>, so value is 33 , it will be assigned to <f3> .it prints 33. -
Please explain the use of all the below movt types
Hi friends,
Can you Please explain the use of all the below movt types and how it is triggered.
901 GR Area for Production
902 GR Area External Rcpts
904 Returns
910 GI Area General
911 GI Area for Cost Center
912 GI Area Customer Order
913 GI Area - Fixed Assets
914 GI Area Production Orders
915 Fixed Bin Picking Area
916 Shipping Area Deliveries
917 Quality Assurance
920 Stock Transfers (Plant)
921 Stock Transfers (StLoc)
922 Posting Change Area
980 R/3 --> R/2 cumulative
998 Init.entry of stock bal.
999 Differences
Regards,
Balu R.VHi,
The below mentioned objects are interim storage types, not movement types.
Interim storage types are used as a sort of bridge between IM and WM.
MZ -
Please explain the magic! (Question)
The ActionScript snippet below is from the BlaseDS chat sample app. Can someone please explain the magic that declares the chatMessage property of AsyncMessage.body (IMessage.body?) object? It's not in the docs anywhere so I'm guessing it is not built into AsyncMessage. And it's not defined in any of the sample app source files.
Coming from a strongly-typed development world, seeing a property that apparently has no declaration and is not explicitly instantiated does not pass the sniff-test.
Thanks.
<mx:Script>
<![CDATA[
import mx.messaging.messages.AsyncMessage;
import mx.messaging.messages.IMessage;
private function send():void
var message:IMessage = new AsyncMessage();
message.body.chatMessage = msg.text;
producer.send(message);
msg.text = "";
private function messageHandler(message:IMessage):void
log.text += message.body.chatMessage + "\n";
]]>Hold your nose, because that is the dynamic "feature" of Actionscript. Pretty much every class derives from Object (http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/Object.html) which is a dictionary of key-value property pairs. The {"chatMessage", msg.text as Object} pair is created upon assignment.
I am fairly new to Flex/AS, and while not having to declare types is convenient for quick and dirty coding, I try to avoid it in production code...I have been bitten by refactoring a class and not catching all the places where it was referenced dynamically. I'm sure there are comprehensive pro and con arguments out there. -
2 GB Limit – Please explain the concept
I have more than 35000 photos already uploaded into Revel.
In order to continue to remain a Free member, shall I have to delete all my photos and keep only within 2 GB limit?
Please explain the new concept... Thanks!You may continue to use revel free of charge with the new model change, however, if you have stored more than 2 GB of files, then you will be unable to upload any additional photos/videos until you delete some files to take you below the limit or subscribe to get unlimited uploads.
Pattie -
In the iPhone, please explain the requirements in settings for Apple id, iPhone and iCloud
You can use 1 unified Apple ID for iTunes so you don't have to repurchase apps. That part is fine.
For iCLoud/iMessage/Facetime you should each have a unique ID so the 2 phones will be separate and you won't accidentally erase each other's content and overwrite settings, nor will you get the others messaages by mistake. -
Please explain the following terms in SRM
Hi Forum,
I am new to SRM and trying to understand some general terms and concepts in SRM.
Please explain the meaning of below jargons if possible with an example and what is their use in SRM bussiness scenarios...
1. Company Code
2. Account Assignment Category - CC, OR etc
3. Cost Center
4. Document Types
5. Transaction Types
6. Movement Types
7. Storage Location
8. Plants
9. Central Person
10. Business Partner
I am trying to understand what is the relevance of above things in SRM/ECC ?
Thanks,
VivekVivek
It would be great if you go through http://help.sap.com/saphelp_srm30/helpdata/en/8d/f6a93e08503614e10000000a114084/frameset.htm
This will help you clear most of your queries.
Regards,
Nikhil -
Could someone please explain the difference between Projects Intelligence and Projects Analytics?
Thanks,
AdrienOlder iPads got 3G service and were called Wi-Fi + 3G. Newer iPads can connect to faster cellular networks and those are given different names by the major carrier so to simplify things Apple calls the newer models Wi-Fi + Cellular.
iPads with 3G or Cellular are NOT used like a mobile phone. They do not make phone calls or send SMS or MMS text messages, They do connect to the data network and can connect to the web. -
Can any please explain the integration business process between PS and CS
Dear Guru's
Can any please explain the integration business process between Project systems (PS) and customer service (CS).
Business Process: We do machinery Erection or commissioning, later we do provide service warranty for one year.
How we map this Business scenario in sap.
Regards,
Bhanubasic steps for such a process would be
1) Use PS functionality for your machinery erection or commisioning work. Once the physical work is completed then close porject
2) Use CS functionality for warranty and service - set up the work as a functional location on customer site (PM/CS functionality)
3) Use service order to manage any service calls on the object which could require billing via SD module - bill value may be zero if under warranty -
A consent for a new eula, please explain the ramification of these new terms
4. Your Compliance With This Agreement.
You acknowledge that your compliance with the terms of this Agreement may require you to provide certain notices to, obtain certain rights from, and impose certain obligations on your Clients and/or users of the websites hosted by the Services. To that end, you agree that each website for which Adobe provides Services on your behalf (including, if you are a Partner, your Clients’ websites) will contain a clear and conspicuous link to a terms of use and a privacy policy that comply with all applicable laws, rules, and regulations.
5. Partner Obligations.
(c) You are responsible for your Clients’ compliance with applicable laws in connection with their use of the Services.
(g) You have or will obtain all rights necessary for you to grant Adobe the licenses granted in Section 16 (“Content”), below.
16. Content.
You (if you are a Site Owner) or your End Users (if you are a Partner), and/or each such party’s respective licensors, retain ownership of any information, content and/or materials that they submit in the course of using the Services (“Content”); however, Adobe needs certain rights to Content in order to provide the Services. Accordingly, you hereby grant to Adobe and its service providers and designees a worldwide, non-exclusive, transferable, sublicensable (through multiple tiers), royalty-free, perpetual, irrevocable right and license, without compensation to you: to use, reproduce, distribute, adapt (including without limitation edit, modify, translate, and reformat), create derivative works of, transmit, publicly display and publicly perform such Content, in any media now known or hereafter developed.
please explain the ramification of these new terms
Thank you,
LanaHi guys,
Correct as Liam noted there are various topics on these concerns.
However if still having issues/concerns I would suggest posting in the original thread below after reviewing Magda's response.
- http://forums.adobe.com/message/4353638
Kind regards,
-Sidney -
Please explain the logic.
select * from
from cust b
LEFT OUTER JOIN
cust a
ON
(a.sales_date+1=b.sales_date)
WHERE TRIM(TO_CHAR(b.sales_date,'DAY')) IN ('SUNDAY','MONDAY','TUESDAY','WEDNESDAY','THURSDAY','FRIDAY')
AND b.sales_Date BETWEEN TO_DATE(V_START_DATE,'DD-MON-YY') AND to_date(V_END_DATE,'DD-MON-YY')
AND a.sales_Date BETWEEN TO_DATE(V_START_DATE,'DD-MON-YY')-1 AND to_date(V_END_DATE,'DD-MON-YY')
Could someone explain the logic behind the query above?
Thanks,
BhagatBugs wrote:
select * from
from cust b
LEFT OUTER JOIN
cust a
ON
(a.sales_date+1=b.sales_date)
WHERE TRIM(TO_CHAR(b.sales_date,'DAY')) IN ('SUNDAY','MONDAY','TUESDAY','WEDNESDAY','THURSDAY','FRIDAY')
AND b.sales_Date BETWEEN TO_DATE(V_START_DATE,'DD-MON-YY') AND to_date(V_END_DATE,'DD-MON-YY')
AND a.sales_Date BETWEEN TO_DATE(V_START_DATE,'DD-MON-YY')-1 AND to_date(V_END_DATE,'DD-MON-YY')
Could someone explain the logic behind the query above?
Thanks,
BhagatDoes this query even run? It has syntax error. You have lot of post under your name. So by now you must be knowing the usage of {noformat}{noformat} tag. So please use them to format the code. -
Please explain the following displayed properties
Hi,
I tried to change the format of displayname under search result rendering setting. I found the following string for displaying display name:
<b>rnd:displayname(contentLink/[1;2-3]/alignTop/space-right=30</b>
please explain how this setting works? for example how that contentLink/[1;2-3] works? is there other setting I can use? like contentLink/1?
Thanks!
T.J.Hi T.J.
First read this:
http://help.sap.com/saphelp_nw04/helpdata/en/79/a1d23e6b2c3d67e10000000a114084/frameset.htm
There are multiple property renderers available for some properties. Simply using the property name
instead of the property name with rnd: namespace will typically display the property value in a
more primitive way than the formatted rnd: version. For instance, the rnd: version for description
will truncate the text whereas the raw version will not.
The bracket syntax is used to postion the properties in grid renders like the search results layout sets.
Regards,
Darin -
Please explain the query?
hello all,
please explain below query used in solution below, thanks in advance!
ELECT MAX(P1.ET) AS ST, P2.ST AS ET
FROM XYZ AS P1
INNER JOIN XYZ AS P2 ON (P1.ST < P2.ST)
GROUP BY P2.ST
HAVING MAX(P1.ET) < P2.ST
IF OBJECT_ID('XYZ') IS NOT NULL
DROP TABLE XYZ
GO
CREATE TABLE XYZ
id int identity(1,1),
ST smalldatetime NOT NULL,
ET smalldatetime NOT NULL
GO
INSERT INTO XYZ (ST, ET)
VALUES ('2010-01-01 9:00AM', '2010-01-01 10:00AM')
INSERT INTO XYZ (ST, ET)
VALUES ('2010-01-01 9:00AM', '2010-01-01 12:00PM')
INSERT INTO XYZ (ST, ET)
VALUES ('2010-01-01 1:00PM', '2010-01-01 2:00PM')
INSERT INTO XYZ (ST, ET)
VALUES ('2010-01-01 3:00PM', '2010-01-01 5:00PM')
INSERT INTO XYZ (ST, ET)
VALUES ('2010-01-01 11:00AM', '2010-01-01 12:00PM')
GO
WITH Gaps(Gap) AS
SELECT COALESCE(SUM(DATEDIFF(MINUTE,ST,ET)), 0)
FROM (
SELECT MAX(P1.ET) AS ST, P2.ST AS ET
FROM XYZ AS P1
INNER JOIN XYZ AS P2 ON (P1.ST < P2.ST)
GROUP BY P2.ST
HAVING MAX(P1.ET) < P2.ST
) gaps
SELECT (
COALESCE(DATEDIFF(MINUTE, MIN(ST), MAX(ET)), 0)
- (SELECT Gap FROM Gaps)
) / 60.0 TotalHrs
FROM XYZSELECT MAX(P1.ET) AS ST, P2.ST AS ET
FROM XYZ AS P1
INNER JOIN XYZ AS P2 ON (P1.ST < P2.ST)
GROUP BY P2.ST
HAVING MAX(P1.ET) < P2.ST
Finds all of the gaps (that is time that is not in any interval in your original data. To see how it works, let's look at an example. I'm going to use data that is a little different than your original data because your data has no gaps.
The query still works if you have no gaps, but it is easier to see what it is doing if the data has some gaps. Also, I'm going to explicitly set the id column instead of making it an identity. This will make it a little easier to identify each
row in the following explanation. So the data I'm going to work with is
CREATE TABLE XYZ
id int,
ST smalldatetime NOT NULL,
ET smalldatetime NOT NULL
GO
INSERT INTO XYZ (id, ST, ET)
VALUES (1, '2010-01-01 9:00AM', '2010-01-01 10:00AM')
INSERT INTO XYZ (id, ST, ET)
VALUES (2, '2010-01-01 9:00AM', '2010-01-01 12:00PM')
INSERT INTO XYZ (id, ST, ET)
VALUES (3, '2010-01-02 1:00PM', '2010-01-02 2:00PM')
INSERT INTO XYZ (id, ST, ET)
VALUES (4, '2010-01-03 3:00PM', '2010-01-03 5:00PM')
INSERT INTO XYZ (id, ST, ET)
VALUES (5, '2010-01-03 7:00PM', '2010-01-03 9:00PM')
Notice that the gaps here are from row 2 to row 3 (12PM on the 1st to 1PM on the 2nd) and row 3 to row 4 (2PM on the 2nd to 3PM on the 3rd) and row 4 to row 5 (5PM on the 3rd to 7PM on the 3rd). So that's what the above subquery should be finding for
us.
To see what a query you don't understand is doing, simplify it to the smallest part you can and see what it returns and then build it up to the final query. So the simplest thing we can do is just the from clause. That gives us
SELECT *
FROM XYZ AS P1
INNER JOIN XYZ AS P2 ON (P1.ST < P2.ST)
/* That gives us the result
1 2010-01-01 09:00:00 2010-01-01 10:00:00 3 2010-01-02 13:00:00 2010-01-02 14:00:00
2 2010-01-01 09:00:00 2010-01-01 12:00:00 3 2010-01-02 13:00:00 2010-01-02 14:00:00
1 2010-01-01 09:00:00 2010-01-01 10:00:00 4 2010-01-03 15:00:00 2010-01-03 17:00:00
2 2010-01-01 09:00:00 2010-01-01 12:00:00 4 2010-01-03 15:00:00 2010-01-03 17:00:00
3 2010-01-02 13:00:00 2010-01-02 14:00:00 4 2010-01-03 15:00:00 2010-01-03 17:00:00
1 2010-01-01 09:00:00 2010-01-01 10:00:00 5 2010-01-03 19:00:00 2010-01-03 21:00:00
2 2010-01-01 09:00:00 2010-01-01 12:00:00 5 2010-01-03 19:00:00 2010-01-03 21:00:00
3 2010-01-02 13:00:00 2010-01-02 14:00:00 5 2010-01-03 19:00:00 2010-01-03 21:00:00
4 2010-01-03 15:00:00 2010-01-03 17:00:00 5 2010-01-03 19:00:00 2010-01-03 21:00:00
Now we want to Group by P2.ST and get the MAX(P1.ET) and P2.ST, so that gives us
SELECT MAX(P1.ET) AS ST, P2.ST AS ET
FROM XYZ AS P1
INNER JOIN XYZ AS P2 ON (P1.ST < P2.ST)
GROUP BY P2.ST
/* Result is
2010-01-01 12:00:00 2010-01-02 13:00:00
2010-01-02 14:00:00 2010-01-03 15:00:00
2010-01-03 17:00:00 2010-01-03 19:00:00
Now with this sample data there are no rows in the output with MAX(P1.ET) > P2.ST. But if there was one, you would not want that row because it is not a real gap (obviously, a gap can't start today and end yesterday). (If you want to see how
you could get a case like that, add a row 6 to the sample data with a ST of 2010-01-01 7:00PM and an ET of 2010-01-03 9:00PM.)
So we add a HAVING MAX(P1.ET) < P2.ST to remove those cases.
That leaves us with all of the gaps. So then with
SELECT COALESCE(SUM(DATEDIFF(MINUTE,ST,ET)), 0)
FROM (
SELECT MAX(P1.ET) AS ST, P2.ST AS ET
FROM XYZ AS P1
INNER JOIN XYZ AS P2 ON (P1.ST < P2.ST)
GROUP BY P2.ST
HAVING MAX(P1.ET) < P2.ST
) gaps
we get the total amount of time in all gaps. Then the final result is just the time from the earliest ST to the latest ET minus the total time from the gap.
Tom -
Experts
Please explain below scenario
1.Create a Formula variable with processing by replacement path
2.Assign it to the key figure associated with the characteristic
3.Create a new key figure based on the formula variable
4. Set the exception threshold for this new key figure.
Thanks In Advance
RaviHi,
<i>2.Assign it to the key figure associated with the characteristic
3.Create a new key figure based on the formula variable
4. Set the exception threshold for this new key figure.</i>
For your second question, i think you are restricting the One characterstic with a keyfigure.
Go to Rows> right click>New selection--> in this select the characterstic you want, and right click --> restrict with the key figure ,with which you want to.
3.Go to Rows>right click>New selection--> select the key figure,and restrict with the Formula variable.
Hope you understand it.
Assign points if it helps.......... -
Please explain the Fault policy for my process
Hi All
I am new to SOA ,In my process i need to do fault handling,iam providing my process details below anybody please help me regarding this..
A.Use SQL view to get details
B. Check originator’s existence
a) If it not present, add error code 30 to error list and return result.
b) If it throws exception, add error code 37 to error list and return result.
c) If originator is present, go to step C.
C. Check flag UncodedFlag =’N’,
a) If no, return result.
b) If it throws exception, add error code 37 to error list and return result.
c) If Un-coded=’N’ is present, go to step d .
d) Check Approver's Staff No is valid,
If it not valid add error code 31 to error list and return result.
If it throws exception, add error code 37 to error list and return result...Please explain me detaile
Thanks in Advance..A.Use SQL view to get details
B. Check originator’s existence
a) If it not present, add error code 30 to error list and return result.
b) If it throws exception, add error code 37 to error list and return result.
c) If originator is present, go to step C.
C. Check flag UncodedFlag =’N’,
a) If no, return result.
b) If it throws exception, add error code 37 to error list and return result.
c) If Un-coded=’N’ is present, go to step d .
d) Check Approver's Staff No is valid,
If it not valid add error code 31 to error list and return result.
If it throws exception, add error code 37 to error list and return result...Please explain me detaile
As per the above, are B. Check originator’s existence
and C. Check flag UncodedFlag =’N’,
and d) Check Approver's Staff No is valid,
are remote calls or another webservice ?
Thanks,
Vijay
Maybe you are looking for
-
New iPod Touch 64GB not syncing photos
Hi, I am really excited to have have just bought my 2nd iPod (ran out of space on my older, 2nd Gen, 16GB iPod). This one is a 3rd Gen 64GB iPod. I have spent a ton of hrs transferring all my music, movies, contacts, fave sites and links, Kindle and
-
How to track the URL that comes from a referred page using XSQL Custom Handler
Hi, I have a cold fusion page(say cf.cfm) that sent a request to xsql page(say test.xsql) and then xsql page displays results. I want to capure the URL of cf.cfm page and then after checking its host name and path name for correctness then want to di
-
Can i sync with windows media player?
Am i able to sync music to my ipod with windows Media player? or do i have to use itunes?
-
i am trying to download itunes and i get this message: service apple mobile device failed to start. verify that you have suffient privileges to start system services. what do i have to do?
-
So I synced my phone to my laptop, transfered all 192 songs that used to be on it, went to play them and nothing. There is just this stupid red round circle with a square in the middle of it next to my music. The only ones that work are the ones that