Please Explain the Standard PCR - XMOD
Hi.
I was just trying to find out of some one can completely explain XMOD step by step.
(Not the procedure to edit or modify. But to read the tree structure in simple words.)
Dear Raghav,
its Employee grouping for payroll accounting
Operation MODIF in the personnel calculation rule XMOD allocates values
to the different employee groups fort able access during payroll
accounting in accordance with the decision tree. The personnel
calculation rule is accessed independently of the wage type using
parameter GEN.
A - absence valuation
c-accrual basis
D-wage type dely
i advise you go thru the documentation instead of explaining you here......
it is linked with the Employee group grouping for PCR table.
all the best
Similar Messages
-
Hi,
Can any one explain the below PCR calculation.
This is the valuation basis for /092
The amount = 950
daily working hours = 7.5 hours
TABLE 508A
NUM=BTGSTDZ
DIVIDE ANR
ZERO = A
ZERO = N
ADDWT *
Your immediate response is highly appreciable.
Rgds
AADITABLE 508A
Read table T508A (use se16n to look at the table if you require)
NUM=BTGSTDZ
If I remember correctly, NUM= will set the number field, B is according to Table Values, and TGSTD should be the table field. The Z seems out of place since the operation only has 10 characters. Use t-code pe04 to learn more on operation NUM, concentrating on the 6 operands for table fields.
DIVIDE ANR
Divide the Amount by the Number, and write the result into the Rate field.
ZERO = A
Zero out the Amount field
ZERO = N
Zero out the Number field
ADDWT *
Write the WT into the Output Table (also called Input Table, or IT). -
Drop down values doesnt get populated in the standard PCRs
Dear SDN Community,
I am using Internal Transfer, Promotion and Transfer PCRs. In all the standard PCRs the dropdowns values are not getting populated. Can you please advice me here.
Thanks!
Surya.The portal patch upgrade has resolved this issue.
-
Please explain, the job of the "ASSIGN COMPONENT ".
Please read this popular example appended below. I am newbie to ABAP.
At the end of the execution the code is printing 33. Don't get it.
Please explain, the job of the "ASSIGN COMPONENT ". How or why it is printing value 33. What is the meaning of the statement, "ASSIGN COMPONENT <F2> OF STRUCTURE <F1> TO <F3>." ?
DATA: BEGIN OF LINE,
COL1 TYPE I VALUE '11',
COL2 TYPE I VALUE '22',
COL3 TYPE I VALUE '33',
END OF LINE.
DATA COMP(5) VALUE 'COL3'.
FIELD-SYMBOLS: <F1>, <F2>, <F3>.
ASSIGN LINE TO <F1>.
ASSIGN COMP TO <F2>.
DO 3 TIMES.
ASSIGN COMPONENT SY-INDEX OF STRUCTURE <F1> TO <F3>.
WRITE <F3>.
ENDDO.
ASSIGN COMPONENT <F2> OF STRUCTURE <F1> TO <F3>.
WRITE / <F3>.
11 22 33
33DATA: BEGIN OF LINE,
COL1 TYPE I VALUE '11',
COL2 TYPE I VALUE '22',
COL3 TYPE I VALUE '33',
END OF LINE.
DATA COMP(5) VALUE 'COL3'.
FIELD-SYMBOLS: <F1>, <F2>, <F3>.
ASSIGN LINE TO <F1>.
ASSIGN COMP TO <F2>. "here you are assigning the column name which is COL3 to <f2>.
DO 3 TIMES.
ASSIGN COMPONENT SY-INDEX OF STRUCTURE <F1> TO <F3>.
WRITE <F3>.
ENDDO.
ASSIGN COMPONENT <F2> OF STRUCTURE <F1> TO <F3>.
ASSIGN 'COL3' of structure <f1> to <f3>. "it is equal to above statement.
WRITE / <F3>.
11 22 33
33
ASSIGN COMPONENT <F2> OF STRUCTURE <F1> TO <F3>. means
assigining COL3 value of the structure <f1> to <f3>, so value is 33 , it will be assigned to <f3> .it prints 33. -
Please explain the use of all the below movt types
Hi friends,
Can you Please explain the use of all the below movt types and how it is triggered.
901 GR Area for Production
902 GR Area External Rcpts
904 Returns
910 GI Area General
911 GI Area for Cost Center
912 GI Area Customer Order
913 GI Area - Fixed Assets
914 GI Area Production Orders
915 Fixed Bin Picking Area
916 Shipping Area Deliveries
917 Quality Assurance
920 Stock Transfers (Plant)
921 Stock Transfers (StLoc)
922 Posting Change Area
980 R/3 --> R/2 cumulative
998 Init.entry of stock bal.
999 Differences
Regards,
Balu R.VHi,
The below mentioned objects are interim storage types, not movement types.
Interim storage types are used as a sort of bridge between IM and WM.
MZ -
Please explain the magic! (Question)
The ActionScript snippet below is from the BlaseDS chat sample app. Can someone please explain the magic that declares the chatMessage property of AsyncMessage.body (IMessage.body?) object? It's not in the docs anywhere so I'm guessing it is not built into AsyncMessage. And it's not defined in any of the sample app source files.
Coming from a strongly-typed development world, seeing a property that apparently has no declaration and is not explicitly instantiated does not pass the sniff-test.
Thanks.
<mx:Script>
<![CDATA[
import mx.messaging.messages.AsyncMessage;
import mx.messaging.messages.IMessage;
private function send():void
var message:IMessage = new AsyncMessage();
message.body.chatMessage = msg.text;
producer.send(message);
msg.text = "";
private function messageHandler(message:IMessage):void
log.text += message.body.chatMessage + "\n";
]]>Hold your nose, because that is the dynamic "feature" of Actionscript. Pretty much every class derives from Object (http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/Object.html) which is a dictionary of key-value property pairs. The {"chatMessage", msg.text as Object} pair is created upon assignment.
I am fairly new to Flex/AS, and while not having to declare types is convenient for quick and dirty coding, I try to avoid it in production code...I have been bitten by refactoring a class and not catching all the places where it was referenced dynamically. I'm sure there are comprehensive pro and con arguments out there. -
2 GB Limit – Please explain the concept
I have more than 35000 photos already uploaded into Revel.
In order to continue to remain a Free member, shall I have to delete all my photos and keep only within 2 GB limit?
Please explain the new concept... Thanks!You may continue to use revel free of charge with the new model change, however, if you have stored more than 2 GB of files, then you will be unable to upload any additional photos/videos until you delete some files to take you below the limit or subscribe to get unlimited uploads.
Pattie -
In the iPhone, please explain the requirements in settings for Apple id, iPhone and iCloud
You can use 1 unified Apple ID for iTunes so you don't have to repurchase apps. That part is fine.
For iCLoud/iMessage/Facetime you should each have a unique ID so the 2 phones will be separate and you won't accidentally erase each other's content and overwrite settings, nor will you get the others messaages by mistake. -
Please explain the following terms in SRM
Hi Forum,
I am new to SRM and trying to understand some general terms and concepts in SRM.
Please explain the meaning of below jargons if possible with an example and what is their use in SRM bussiness scenarios...
1. Company Code
2. Account Assignment Category - CC, OR etc
3. Cost Center
4. Document Types
5. Transaction Types
6. Movement Types
7. Storage Location
8. Plants
9. Central Person
10. Business Partner
I am trying to understand what is the relevance of above things in SRM/ECC ?
Thanks,
VivekVivek
It would be great if you go through http://help.sap.com/saphelp_srm30/helpdata/en/8d/f6a93e08503614e10000000a114084/frameset.htm
This will help you clear most of your queries.
Regards,
Nikhil -
Could someone please explain the difference between Projects Intelligence and Projects Analytics?
Thanks,
AdrienOlder iPads got 3G service and were called Wi-Fi + 3G. Newer iPads can connect to faster cellular networks and those are given different names by the major carrier so to simplify things Apple calls the newer models Wi-Fi + Cellular.
iPads with 3G or Cellular are NOT used like a mobile phone. They do not make phone calls or send SMS or MMS text messages, They do connect to the data network and can connect to the web. -
Can any please explain the integration business process between PS and CS
Dear Guru's
Can any please explain the integration business process between Project systems (PS) and customer service (CS).
Business Process: We do machinery Erection or commissioning, later we do provide service warranty for one year.
How we map this Business scenario in sap.
Regards,
Bhanubasic steps for such a process would be
1) Use PS functionality for your machinery erection or commisioning work. Once the physical work is completed then close porject
2) Use CS functionality for warranty and service - set up the work as a functional location on customer site (PM/CS functionality)
3) Use service order to manage any service calls on the object which could require billing via SD module - bill value may be zero if under warranty -
A consent for a new eula, please explain the ramification of these new terms
4. Your Compliance With This Agreement.
You acknowledge that your compliance with the terms of this Agreement may require you to provide certain notices to, obtain certain rights from, and impose certain obligations on your Clients and/or users of the websites hosted by the Services. To that end, you agree that each website for which Adobe provides Services on your behalf (including, if you are a Partner, your Clients’ websites) will contain a clear and conspicuous link to a terms of use and a privacy policy that comply with all applicable laws, rules, and regulations.
5. Partner Obligations.
(c) You are responsible for your Clients’ compliance with applicable laws in connection with their use of the Services.
(g) You have or will obtain all rights necessary for you to grant Adobe the licenses granted in Section 16 (“Content”), below.
16. Content.
You (if you are a Site Owner) or your End Users (if you are a Partner), and/or each such party’s respective licensors, retain ownership of any information, content and/or materials that they submit in the course of using the Services (“Content”); however, Adobe needs certain rights to Content in order to provide the Services. Accordingly, you hereby grant to Adobe and its service providers and designees a worldwide, non-exclusive, transferable, sublicensable (through multiple tiers), royalty-free, perpetual, irrevocable right and license, without compensation to you: to use, reproduce, distribute, adapt (including without limitation edit, modify, translate, and reformat), create derivative works of, transmit, publicly display and publicly perform such Content, in any media now known or hereafter developed.
please explain the ramification of these new terms
Thank you,
LanaHi guys,
Correct as Liam noted there are various topics on these concerns.
However if still having issues/concerns I would suggest posting in the original thread below after reviewing Magda's response.
- http://forums.adobe.com/message/4353638
Kind regards,
-Sidney -
Please explain the following declaration
Hi,
The declaration is :
DATA: BEGIN OF BDCDATA OCCURS 0.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
I don't know the meaning about the above the declaration,especially, at "INCLUDE STRUCTURE".
Please,explain it.
Thanks very much.Hi
The declaration is :
DATA: BEGIN OF BDCDATA OCCURS 0.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
1. In the declaration,
Data : begin of bdcdata occurs0
An internal table ''bdcdata'' is getting created .
2. include structure bdcdata
it includes structure BDCDATA in the internal table that is created above ie bdcdata
It means all fields (names , datatypes and length )that are in standard structure BDCDATA are included in the internal table.
the other way of writing it is :
data : begin of itab occurs 0.
include structure BDCDATA.
data : end of itab.
Another form,
data : begin of itab occurs 0,
f1 type BDCDATA-PROGRAM,
f2 type BDCDATA-DYNPRO,
f3 type BDCDATA-DYNBEGIN,
f4 tyoe BDCDATA-FNAM,
f5 type BDCDATA-FVAL,
end of itab.
hope its helpful.
Reward points if useful.
Regards
Megha Sharma -
Please explain the logic.
select * from
from cust b
LEFT OUTER JOIN
cust a
ON
(a.sales_date+1=b.sales_date)
WHERE TRIM(TO_CHAR(b.sales_date,'DAY')) IN ('SUNDAY','MONDAY','TUESDAY','WEDNESDAY','THURSDAY','FRIDAY')
AND b.sales_Date BETWEEN TO_DATE(V_START_DATE,'DD-MON-YY') AND to_date(V_END_DATE,'DD-MON-YY')
AND a.sales_Date BETWEEN TO_DATE(V_START_DATE,'DD-MON-YY')-1 AND to_date(V_END_DATE,'DD-MON-YY')
Could someone explain the logic behind the query above?
Thanks,
BhagatBugs wrote:
select * from
from cust b
LEFT OUTER JOIN
cust a
ON
(a.sales_date+1=b.sales_date)
WHERE TRIM(TO_CHAR(b.sales_date,'DAY')) IN ('SUNDAY','MONDAY','TUESDAY','WEDNESDAY','THURSDAY','FRIDAY')
AND b.sales_Date BETWEEN TO_DATE(V_START_DATE,'DD-MON-YY') AND to_date(V_END_DATE,'DD-MON-YY')
AND a.sales_Date BETWEEN TO_DATE(V_START_DATE,'DD-MON-YY')-1 AND to_date(V_END_DATE,'DD-MON-YY')
Could someone explain the logic behind the query above?
Thanks,
BhagatDoes this query even run? It has syntax error. You have lot of post under your name. So by now you must be knowing the usage of {noformat}{noformat} tag. So please use them to format the code. -
Please explain the following displayed properties
Hi,
I tried to change the format of displayname under search result rendering setting. I found the following string for displaying display name:
<b>rnd:displayname(contentLink/[1;2-3]/alignTop/space-right=30</b>
please explain how this setting works? for example how that contentLink/[1;2-3] works? is there other setting I can use? like contentLink/1?
Thanks!
T.J.Hi T.J.
First read this:
http://help.sap.com/saphelp_nw04/helpdata/en/79/a1d23e6b2c3d67e10000000a114084/frameset.htm
There are multiple property renderers available for some properties. Simply using the property name
instead of the property name with rnd: namespace will typically display the property value in a
more primitive way than the formatted rnd: version. For instance, the rnd: version for description
will truncate the text whereas the raw version will not.
The bracket syntax is used to postion the properties in grid renders like the search results layout sets.
Regards,
Darin
Maybe you are looking for
-
Lots of issues since installing a new apple keyboard
Since I purchased a new a apple keyboard (the new wired flat ones) I have had nothing but issues with any USB devices plugged in. Specifically my Belkin hub which prior was perfect now has all sorts of issues. Trying to import images on a card reader
-
FI-MM integrations(GR/IR Clearing a/c)
Hi All, I face one interview question from the one of the interview. I.e. What is GR/IR clearing a/c? what is the purpose to use GR/IR Clearing a/c? for these questions i have answered but Immediately the interviewer ask me ask me. If i Receipt Good
-
ORA-29857: domain indexes and/or secondary objects exist in the tablespace
I tried to drop tablespace APPS_TS_TX_DATA using drop tablespace APPS_TS_TX_DATA including contents and datafiles cascade constraints. I got error ORA-29857: domain indexes and/or secondary objects exist in the tablespace. After I have dropped all do
-
Adobe Audition CS5.5 Upsell from Soundbooth...?
Please, excuse any apparent ignorance on my part, but I've learned the hard way not to assume anything. "Adobe Audition CS5.5 Upsell from Soundbooth" is $99. Am I to understand that if I own Soundbooth CS5, I can buy the "upsell" of Audtion for $99.
-
How to make a Word for Mac 2008 doc into a PDF using Acrobat Macintosh
Any ideas how to turn a Word for Mac 2008 document into a PDF using Acrobat Pro? Thank you if you can help.