Please explain what is happening at each step of a iphone sync

I am trying to diagnose a problem regarding backing up my iphone 5 with itunes. I keep getting a doesn't sync error message (-50)
I tried various methods, and I still getting the error message.
Now I am going to do a complete restore, whipping out all the data, resetting my Iphone, and restoring from a backup.
But I fear that with the error (-50), some data was not backed up.
So someone, please tell me exact what is happening at each of the 6 or 7 steps of an iphone.
Be very specific, don't give me speculation or opinion.
What is saved after each of the 6 or 7 steps of an iphone sync with itunes.
Such as "after step 1, so and so happened or saved,"
"after step 2, so and so happened or was saved" and so forth.

You can find more info on error -50 here... http://support.apple.com/kb/TS1275

Similar Messages

What happens at each step of an iPhone Backup and Sync?

Can someone tell me exact what is happening at each step of an iPhone backup and sync?
I see 5 to 7 steps.
So what has happened after step 1, then after step 2, and so forth?
I would appreciate if only those who knows exactly what happens will list it in their reply.
Please don't tell me to google the question, or point me to a link. I tried all those steps, and I could not find the answer.
If you can't tell me precisely what happens after each step of a sync, please don't reply.

You can find more info on error -50 here... http://support.apple.com/kb/TS1275

Please explain what is happening to my drawing:

Hi all. I've been using Adobe Flash since about CS2 or so.
I have my own animated web series and I've run into so many issues with Adobe Flash throughout the years I'm not even going to begin to talk about them all.
I'm now using Adobe Flash CS5.5 with it's newest update and would like someone to help me figure out why my drawing will be perfectly adequate (all colors are great and I'm happy with the end result), then all of a sudden I save the file and open it up later and one of the "groups" will be ruined.
I can open up an old copy of the file (which I was lucky enough to have) and that "group" is still OK. I can copy it and paste it into the newest file and it gets screwed up as soon as I paste it in.
I can't figure it out. I've seen this happen so many times. I know most of you are probably going to say I should'nt be using Adobe Flash to draw my characters but I actually really like the way it comes out when I do so. Adobe Illustrator, Autodesk Sketchbook, etc just don't "feel" right.
Anyway, you can see the original image and the screwed up one below. The part that is distorted is the group (not the whole picture).
Any insight woud be greatly apreciated.

Wow thanks guys. Nice to know this forum has such excellent support.
Not even an acknowledgement.
Great.
Guess I'm on my own.
Thanks for nothing.

Firefox 4 extremely slow at start up, Then after awhile it clears its cache automaticly then its speed up. Please explain whats happening.

Firefox would slow up when cache builds up. Especially at start ups. Extremely slow. Then a few second later it would go back to normal. Then when i check the cache. It has already been cleared automaticly. Can somebody please explain whats going on. Looks like it has something to do with Automatic cache management system. THank you very much.

You may want to just get one utility for now.
At this point, do you need a new graphic card? then you need to upgrade to Leopard. If your software and system won't be a problem regardless of compatibility great, but make sure. Otherwise, Snow Leopard will likely require lots more upgrades and updates.
But maybe doing an upgrade to Leopard and then test the waters with Leopard and Snow L. makes better sense.
Only the "Early, Early" 2006-7 1st Gen Mac Pros can run 10.4.11 (or at least install and officially supported).
The product pages have misleading information but you do need 10.5.7 for the 4870 which is your best graphics upgrade choice. The 3870 came out a year ago and requires 10.5.3+.

Please explain what are form groups and form routines

Hello ABAP Experts,
Could you please explain what are form groups and form routines? I would certainly appreciate some examples.
Thank you in advance, Aleksandra

Hi,
I've found the Form Group in transaction J7LE. It is part of Industry Specific solution for hi tech companies, so I'm not sure if you'll be able to access it. In this tcode you define master data of your partner. The first step is to choose the Form Group - they simply group Form Routines. Depending on which one I choose, different entry fields get activated. However there are routines that will enable input to the same fields, so I suppose there must be some additional functionality behind it. Could you please specify what does it mean?
>>Form ROUTINES, are subroutines for modularizing your code<<
I'm afraid I have no ABAP experience at all...
Cheers, A.

WRT1900ac: Please explain what uPnP setting does

Could someone please explain what the following settings (in the Connectivity-Administration page) do?
UPnP I_l Enabled
I_l Allow users to configure
I_l Allow users to disable internet access
Do these en/disable uPnP access to the router from the WAN side? LAN side?
En/disable uPnP protocol for all devices on the LAN?
The User Manual is not clear what each of these check-boxes do...
Thanks.
Aloke

I'ts recommended to leave uPnP enabled as it helps various devices obtain reqired port connections to the internet services and internal devices on the LAN side for some gaming and media sharing services and devices as well.
The additional options are I believe to allow users to configure there own services on than side if needed. At most, if uPnP is enabled, evrything is automatic and little or no coniguration is needed.
http://en.wikipedia.org/wiki/Universal_Plug_and_Play

Could someone please explain what P to P and Order to Cash cycle?

Could someone please explain what Procurement to Pay and Order to Cash cycles mean? Thanks.

Hi,
Pl.visit following links for P2P cycle.
http://erpschools.com/articles/procure-to-pay-cycle#13480480234441&79412::resize_frame
http://oracleapplicationsfunctional.blogspot.in/2011/08/procure-to-pay-p2p-cycle-in-purchasing.html
http://www.shareoracleapps.com/2010/05/procure-to-pay-cycle-in-oracle-apps-r12.html
and visit following links for O2C cycle.
http://erpschools.com/articles/order-to-cash-cycle#13480481951911&21367::resize_frame
http://www.youtube.com/watch?v=2GhAbWGz7iA
http://knoworacle.wordpress.com/2008/12/08/data-flow-for-11i-order-to-cash-cycle/
http://oracleapps88.blogspot.in/2012/08/order-to-cash-cycle.html
http://www.slideshare.net/anand5538/order-to-cash-cycle-9647606
HTH
Sanjay

When I try to download apps, a message appears saying that to move forward I have to agree to the new terms of the contract, but does not allow me to agree and not low Apps. Someone can explain what is happening?? thank you

When I try to download apps, a message appears saying that to move forward I have to agree to the new terms of the contract, but does not allow me to agree and not low Apps. Someone can explain what is happening?? thank you

Delete some stuff to make room on the device.
iCloud is not local storage and has nothing to do with your situation.

Hi guru's i am new to xi please explain what is correlation in xi

1) please explain what is correlation in xi ?
2) what is the xi landscape ?

hi,
Refer these links
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
http://help.sap.com/saphelp_nw2004s/helpdata/en/a5/64373f7853494fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
Landscape:
The SAP System Landscape Directory (SLD) is the central information provider in a system landscape.
The SLD contains two types of information:
Component Information: This is information about all available SAP products and components, including their versions. If there are any third-party products in the system landscape, they are also registered here.
At design time of the integration objects, the component information is extracted from the SLD to define integration scenarios.
Landscape Description: This contains all installed systems in a system landscape.
When a collaborative business process is configured, the landscape descriptions are needed to determine the system information of the business partners involved.
/people/boris.zarske/blog/2006/07/28/ulm206-landscape-strategies-for-the-system-landscape-directory-of-sap-netweaver
/people/boris.zarske/blog/2008/03/21/sld-general-recommendation-how-to-set-up-the-system-landscape-directory
http://help.sap.com/saphelp_nw04s/helpdata/en/fe/39ae3d47afd652e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/frameset.htm
Regards,
Nithiyanandam
Edited by: Nithiyanandam A.U. on May 11, 2009 7:01 AM

I have downloaded ios 5.1.1 and the wifi has stop working or it would stay on for less then 20min its only 9 months old can someone explain what is happening and if some know how to fix it

I have downloaded ios 5.1.1 and the wifi has stop working or it would stay on for less then 20min its only 9 months old can someone explain what is happening and if some know how to fix it

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

Please explain what are the various procedures to find user-eixts

Hi,
Please explain what are the various procedures to find user-eixts ?
Ramana

Hi,
1. By executing this Program.
*& Report ZFIND_EXIT
REPORT ZFIND_EXIT.
*report zbadi_find .
tables : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode,
p_pgmna like tstc-pgmna .
data wa_tadir type tadir.
start-of-selection.
if not p_tcode is initial.
select single * from tstc where tcode eq p_tcode.
elseif not p_pgmna is initial.
tstc-pgmna = p_pgmna.
endif.
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object in ('SMOD', 'SXSD')
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(105) sy-uline.
format color col_heading intensified on.
Sorting the internal Table
sort jtab by object.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type c.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
loop at jtab into wa_tadir.
at first.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
write:/(105) sy-uline.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
format color col_group intensified on.
write:/1 sy-vline,
2 wf_object2,
105 sy-vline.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
select single modtext into wf_txt
from modsapt
where sprsl = sy-langu
and name = wa_tadir-obj_name.
format color col_normal intensified off.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single text into wf_txt
from sxs_attrt
where sprsl = sy-langu
and exit_name = wa_tadir-obj_name.
format color col_normal intensified on.
endcase.
write:/1 sy-vline,
2 wa_tadir-obj_name hotspot on,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
at end of object.
write : /(105) sy-uline.
endat.
endloop.
write:/(105) sy-uline.
skip.
format color col_total intensified on.
write:/ 'No.of Exits:' , wf_smod.
write:/ 'No.of BADis:' , wf_badi.
else.
format color col_negative intensified on.
write:/(105) 'No userexits or BADis exist'.
endif.
else.
format color col_negative intensified on.
write:/(105) 'Transaction does not exist'.
endif.
at line-selection.
data : wf_object type tadir-object.
clear wf_object.
get cursor field field1.
check field1(8) eq 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
when 'SXSD'.
set parameter id 'EXN' field sy-lisel+1(20).
call transaction 'SE18' and skip first screen.
endcase.
2. . Go to the screen>System>Status-->Program (Double
click this program. It will take you to the program.
2. Now, Goto-->Object Directory Entry.
3. Make a note the package name.
4. Now run the transactions SMOD, press F4 and enter the
above noted package, press enter.
5. It will display list of Exits.
6. Now go back to the initial screen SMOD.
7. Specify the exit name here and select the radio button
Components.
8. It will display four group boxes one for FM, second
for Fcodes, thrid for Screen areas and last for
includes.
9. Goto transaction CMOD, create a new project, and
click the button "Enhancement assignments" and
specify your enhancements that you got in SMOD.
10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
3. 1. in se11, goto table MODSAP
View table contents
in Type field, enter
'E' (for user exit / Function Exit)
OR 'S' (for screen exit)
4. Calling Customer- fucntion in Main Program
Thanks,
Anitha

Could someone please explain what "Run Spindump" & "Run System Diagnostics" does in 'Activity Monitor' ?

Could someone please explain what "Run Spindump" & "Run System Diagnostics" does in 'Activity Monitor' ?

Good question. You don't need to worry about running those. They will run automatically when needed by the system. The information they generate (some) is sent to apple automatically (unless that setting is disabled).
If you want to look at the output of these files, most can be found in the console (Utility/Console). Open the app and look at all the system messages your Mac generates....on the right hand side I would bet you already have a crash log or spindump that was collected without you even knowing it.

What will happen if I restore/update my iPhone 4 while the unverified find my iPhone iCloud account of my cousin is signed in?

What will happen if I restore/update my iPhone 4 currently on iOS 7.0.4 to the latest version while my cousin's unverified find my iPhone iCloud account is signed in? will it still activate the find my iPhone feature?

iCloud: Find My iPhone Activation Lock in iOS 7
iCloud: Activation Lock
you would need to know your cousin's info in order to activate the phone.

When I am connected to the WiFi, my apps cannot be download. Once I had disable the wifi and connect directly to the service provider, the apps will start to download. Please advise what is the problem and solution for my iPhone 5.

When I am connected to the WiFi, my apps cannot be download. Once I had disable the wifi and connect directly to the service provider, the apps will start to download. Please advise what is the problem and solution for my iPhone 5.

I can't follow your meaning. What does connect directly to your ISP mean?
Did you mean turning off WiFi but turning on Cellular Data on your iPhone?

Hello ...could u please tell what would be the total cost of the iphone 5 non-contract? is that $649? or will it go beyond that? including tax?

hello ...could u please tell what would be the total cost of the iphone 5 non-contract? is that $649? or will it go beyond that? including tax?

orite thank you but the thing is...im in india so here the iphone 5 will lauch only by december i guess.....so i thought of getting it in US with a help of my brother. so will it exceed $800 ?? or will the tax make much of difference from $649 ?? ... cz i just cant wait to hold it in my hand

Please explain what is happening at each step of a iphone sync

Similar Messages

Maybe you are looking for