Please explain what is happening to my drawing:

Hi all. I've been using Adobe Flash since about CS2 or so.
I have my own animated web series and I've run into so many issues with Adobe Flash throughout the years I'm not even going to begin to talk about them all.
I'm now using Adobe Flash CS5.5 with it's newest update and would like someone to help me figure out why my drawing will be perfectly adequate (all colors are great and I'm happy with the end result), then all of a sudden I save the file and open it up later and one of the "groups" will be ruined.
I can open up an old copy of the file (which I was lucky enough to have) and that "group" is still OK. I can copy it and paste it into the newest file and it gets screwed up as soon as I paste it in.
I can't figure it out. I've seen this happen so many times. I know most of you are probably going to say I should'nt be using Adobe Flash to draw my characters but I actually really like the way it comes out when I do so. Adobe Illustrator, Autodesk Sketchbook, etc just don't "feel" right.
Anyway, you can see the original image and the screwed up one below. The part that is distorted is the group (not the whole picture).
Any insight woud be greatly apreciated.

Wow thanks guys. Nice to know this forum has such excellent support.
Not even an acknowledgement.
Great.
Guess I'm on my own.
Thanks for nothing.

Similar Messages

Please explain what is happening at each step of a iphone sync

I am trying to diagnose a problem regarding backing up my iphone 5 with itunes. I keep getting a doesn't sync error message (-50)
I tried various methods, and I still getting the error message.
Now I am going to do a complete restore, whipping out all the data, resetting my Iphone, and restoring from a backup.
But I fear that with the error (-50), some data was not backed up.
So someone, please tell me exact what is happening at each of the 6 or 7 steps of an iphone.
Be very specific, don't give me speculation or opinion.
What is saved after each of the 6 or 7 steps of an iphone sync with itunes.
Such as "after step 1, so and so happened or saved,"
"after step 2, so and so happened or was saved" and so forth.

You can find more info on error -50 here... http://support.apple.com/kb/TS1275

Firefox 4 extremely slow at start up, Then after awhile it clears its cache automaticly then its speed up. Please explain whats happening.

Firefox would slow up when cache builds up. Especially at start ups. Extremely slow. Then a few second later it would go back to normal. Then when i check the cache. It has already been cleared automaticly. Can somebody please explain whats going on. Looks like it has something to do with Automatic cache management system. THank you very much.

You may want to just get one utility for now.
At this point, do you need a new graphic card? then you need to upgrade to Leopard. If your software and system won't be a problem regardless of compatibility great, but make sure. Otherwise, Snow Leopard will likely require lots more upgrades and updates.
But maybe doing an upgrade to Leopard and then test the waters with Leopard and Snow L. makes better sense.
Only the "Early, Early" 2006-7 1st Gen Mac Pros can run 10.4.11 (or at least install and officially supported).
The product pages have misleading information but you do need 10.5.7 for the 4870 which is your best graphics upgrade choice. The 3870 came out a year ago and requires 10.5.3+.

Could someone please explain what P to P and Order to Cash cycle?

Could someone please explain what Procurement to Pay and Order to Cash cycles mean? Thanks.

Hi,
Pl.visit following links for P2P cycle.
http://erpschools.com/articles/procure-to-pay-cycle#13480480234441&79412::resize_frame
http://oracleapplicationsfunctional.blogspot.in/2011/08/procure-to-pay-p2p-cycle-in-purchasing.html
http://www.shareoracleapps.com/2010/05/procure-to-pay-cycle-in-oracle-apps-r12.html
and visit following links for O2C cycle.
http://erpschools.com/articles/order-to-cash-cycle#13480481951911&21367::resize_frame
http://www.youtube.com/watch?v=2GhAbWGz7iA
http://knoworacle.wordpress.com/2008/12/08/data-flow-for-11i-order-to-cash-cycle/
http://oracleapps88.blogspot.in/2012/08/order-to-cash-cycle.html
http://www.slideshare.net/anand5538/order-to-cash-cycle-9647606
HTH
Sanjay

When I try to download apps, a message appears saying that to move forward I have to agree to the new terms of the contract, but does not allow me to agree and not low Apps. Someone can explain what is happening?? thank you

When I try to download apps, a message appears saying that to move forward I have to agree to the new terms of the contract, but does not allow me to agree and not low Apps. Someone can explain what is happening?? thank you

Delete some stuff to make room on the device.
iCloud is not local storage and has nothing to do with your situation.

Hi guru's i am new to xi please explain what is correlation in xi

1) please explain what is correlation in xi ?
2) what is the xi landscape ?

hi,
Refer these links
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
http://help.sap.com/saphelp_nw2004s/helpdata/en/a5/64373f7853494fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
Landscape:
The SAP System Landscape Directory (SLD) is the central information provider in a system landscape.
The SLD contains two types of information:
Component Information: This is information about all available SAP products and components, including their versions. If there are any third-party products in the system landscape, they are also registered here.
At design time of the integration objects, the component information is extracted from the SLD to define integration scenarios.
Landscape Description: This contains all installed systems in a system landscape.
When a collaborative business process is configured, the landscape descriptions are needed to determine the system information of the business partners involved.
/people/boris.zarske/blog/2006/07/28/ulm206-landscape-strategies-for-the-system-landscape-directory-of-sap-netweaver
/people/boris.zarske/blog/2008/03/21/sld-general-recommendation-how-to-set-up-the-system-landscape-directory
http://help.sap.com/saphelp_nw04s/helpdata/en/fe/39ae3d47afd652e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/frameset.htm
Regards,
Nithiyanandam
Edited by: Nithiyanandam A.U. on May 11, 2009 7:01 AM

I have downloaded ios 5.1.1 and the wifi has stop working or it would stay on for less then 20min its only 9 months old can someone explain what is happening and if some know how to fix it

I have downloaded ios 5.1.1 and the wifi has stop working or it would stay on for less then 20min its only 9 months old can someone explain what is happening and if some know how to fix it

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

Please explain what are form groups and form routines

Hello ABAP Experts,
Could you please explain what are form groups and form routines? I would certainly appreciate some examples.
Thank you in advance, Aleksandra

Hi,
I've found the Form Group in transaction J7LE. It is part of Industry Specific solution for hi tech companies, so I'm not sure if you'll be able to access it. In this tcode you define master data of your partner. The first step is to choose the Form Group - they simply group Form Routines. Depending on which one I choose, different entry fields get activated. However there are routines that will enable input to the same fields, so I suppose there must be some additional functionality behind it. Could you please specify what does it mean?
>>Form ROUTINES, are subroutines for modularizing your code<<
I'm afraid I have no ABAP experience at all...
Cheers, A.

Please explain what are the various procedures to find user-eixts

Hi,
Please explain what are the various procedures to find user-eixts ?
Ramana

Hi,
1. By executing this Program.
*& Report ZFIND_EXIT
REPORT ZFIND_EXIT.
*report zbadi_find .
tables : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode,
p_pgmna like tstc-pgmna .
data wa_tadir type tadir.
start-of-selection.
if not p_tcode is initial.
select single * from tstc where tcode eq p_tcode.
elseif not p_pgmna is initial.
tstc-pgmna = p_pgmna.
endif.
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object in ('SMOD', 'SXSD')
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(105) sy-uline.
format color col_heading intensified on.
Sorting the internal Table
sort jtab by object.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type c.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
loop at jtab into wa_tadir.
at first.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
write:/(105) sy-uline.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
format color col_group intensified on.
write:/1 sy-vline,
2 wf_object2,
105 sy-vline.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
select single modtext into wf_txt
from modsapt
where sprsl = sy-langu
and name = wa_tadir-obj_name.
format color col_normal intensified off.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single text into wf_txt
from sxs_attrt
where sprsl = sy-langu
and exit_name = wa_tadir-obj_name.
format color col_normal intensified on.
endcase.
write:/1 sy-vline,
2 wa_tadir-obj_name hotspot on,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
at end of object.
write : /(105) sy-uline.
endat.
endloop.
write:/(105) sy-uline.
skip.
format color col_total intensified on.
write:/ 'No.of Exits:' , wf_smod.
write:/ 'No.of BADis:' , wf_badi.
else.
format color col_negative intensified on.
write:/(105) 'No userexits or BADis exist'.
endif.
else.
format color col_negative intensified on.
write:/(105) 'Transaction does not exist'.
endif.
at line-selection.
data : wf_object type tadir-object.
clear wf_object.
get cursor field field1.
check field1(8) eq 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
when 'SXSD'.
set parameter id 'EXN' field sy-lisel+1(20).
call transaction 'SE18' and skip first screen.
endcase.
2. . Go to the screen>System>Status-->Program (Double
click this program. It will take you to the program.
2. Now, Goto-->Object Directory Entry.
3. Make a note the package name.
4. Now run the transactions SMOD, press F4 and enter the
above noted package, press enter.
5. It will display list of Exits.
6. Now go back to the initial screen SMOD.
7. Specify the exit name here and select the radio button
Components.
8. It will display four group boxes one for FM, second
for Fcodes, thrid for Screen areas and last for
includes.
9. Goto transaction CMOD, create a new project, and
click the button "Enhancement assignments" and
specify your enhancements that you got in SMOD.
10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
3. 1. in se11, goto table MODSAP
View table contents
in Type field, enter
'E' (for user exit / Function Exit)
OR 'S' (for screen exit)
4. Calling Customer- fucntion in Main Program
Thanks,
Anitha

WRT1900ac: Please explain what uPnP setting does

Could someone please explain what the following settings (in the Connectivity-Administration page) do?
UPnP I_l Enabled
I_l Allow users to configure
I_l Allow users to disable internet access
Do these en/disable uPnP access to the router from the WAN side? LAN side?
En/disable uPnP protocol for all devices on the LAN?
The User Manual is not clear what each of these check-boxes do...
Thanks.
Aloke

I'ts recommended to leave uPnP enabled as it helps various devices obtain reqired port connections to the internet services and internal devices on the LAN side for some gaming and media sharing services and devices as well.
The additional options are I believe to allow users to configure there own services on than side if needed. At most, if uPnP is enabled, evrything is automatic and little or no coniguration is needed.
http://en.wikipedia.org/wiki/Universal_Plug_and_Play

Could someone please explain what "Run Spindump" & "Run System Diagnostics" does in 'Activity Monitor' ?

Could someone please explain what "Run Spindump" & "Run System Diagnostics" does in 'Activity Monitor' ?

Good question. You don't need to worry about running those. They will run automatically when needed by the system. The information they generate (some) is sent to apple automatically (unless that setting is disabled).
If you want to look at the output of these files, most can be found in the console (Utility/Console). Open the app and look at all the system messages your Mac generates....on the right hand side I would bet you already have a crash log or spindump that was collected without you even knowing it.

Could someone explain what's happening? (pretty long)

This post is similar to the one I have posted earlier. I was hoping someone could explain to me what really is going on in the server.
I have a page where I have a header, left menu, right menu, footer. These are inluded jsp files using the include directive. In the main body I check if the request for the page was a post, do some actions with my beans then redirect to another page. So basically my code looks something like this:
   if (request.getMethod().equalsIgnoreCase("POST")) {
      // do some stuff with my beans
     response.sendRedirect("OtherPage.jsp");
     return; )When I reach the redirect that''s when I get an error: Microsoft Internal error. If I take off the redirect everything works except my user is still left in hte same page. The error occurs while I'm still loading my left menu. My left menu is made up of 2 sections. The first one is the menu options which is generated through JSP, and the second half the links of the site which is plain HTML. So I did a little experimentation. First I tried using the jsp:forward instead of the redirect. Still no go. Then I tried cutting my left menu to the point where I usually get the error, that's the part of the links. So I took of the links in the left menu - the pure HTML part of the menu, and it worked. So I tried generating the links through JSP as well. I got the error again. After researching in the forums I tried increasing the buffer size. A suggestion I saw in previous posts with people with similar problems. I increased the buffer size to 9kb using the <%@ page buffer ="9" %>. It worked. I restored my left menu the way it was before, and thikn s worked fine.
What's bugging me is that my left menu is very simple. It's just has a small background image and some links. The main page is just a simple form as well. I really don't see why there is a need to increase the buffer size. Is my design flawed and inefficient? Or is the need to increase the buffer a common thing in web applications?
I was also thinking could it be that I'm trying to send another response while still processing the current response? I noticed in some sites they do not redirect, instead the just post a page and link to the page where the user has to go. Is my approach wrong? Are you allowed to redirect in the manner I have?
If my design is wrong, what are the other approaches in performing the preocedure? Are there other methods that are more efficient which do not require an increase of the buffer?
I was hoping someone could explain what really is happening behind the scene, so I can decide what is the best approach. This is my first time doing a web application and everything is still new. Hoping to learn from you gurus. Thanks in advance for all the help!

Hi,
Vicky I did uncheck the show user friendly errors and
I still get "an internal error has occured in the
Microsoft internal extensions". Unless I'm doing
something wrong. If it's any help I'm still using ie
5. But I can tell you this, the error is raised while
I'm still in the same page. The page posts to itself
do some validation then redirects. When I hit the
redirect That's when I get the error.It should have shown you the actual Exception,Ibelieve even after unchecking the show user friendly error the response is comming from cache...So now try this Tools-----General---DeleteFiles----AlloffLine files(Check this)....
Now try the response....
As regards to the buffer I tried increasing it to 9kb
instead of the default 8kb and everything worked fine.
Right now what I did with the page is keep the buffer
at it's default 8kb size, it shows some message and
provides a link to direct the user where to go. I
don't think it's a Java exception because I have an
error page that displays the exception and the stack,
and I don't get redirected there. I think it has
something to do with either the buffer and/or creating
another response. Of course I could be wrong, I'm
still trying to figure things out and me being a
newbie and all I'm not getting anywhere.Well,try to access the page directly I mean OtherPage,jsp,which comes from response.sendRedirect.......
Are you allowed to redirect while processing a
response in the first place?Of cource you can....Actually if we see logically once the response is generated at the server it can be send as it is being generated or it can be stored in buffer at the server and then send at one time so the I/o allocations are not held forf the longer times.The default for the jsp is buffered state which can hold 8k,what will happen if the response you are trying to write is more than 8k,it will flush the old storage(check this) can depend on container implementation also....
You get IllegalStateException if the the autoflush=false defined by you....
Can you post the code of the two files let me see.
regards vicky

Round Corners Effect Can someone explain what's happening?

I just don't get what's going on here... I have this shape, a bent rectangle and I need it to have rounded corners. When I apply the effect Round Corners the shape is transformed to a completely diferent shape instead of just applying round corners on each corner. See image below. What am I doing wrong?

Now you've done it!
What's happening well I would say it was not working, which means it is a bug.
However you can get it to work if you do it one of three ways.
Draw your rectangle then give it a round corner effect or convert it to a round corner rectangle
then give it either a warp effect or go to Object>Envelop Distort>Make with Warp and then expand.
You can expand the warp effect as well.
The third way is to make a round corner rectangle and either do the warp from the Object menu or do it as an effect.
Otherwise the explanation for the result you see is it is a bug. It shouldn't happen.
I think this might have been reported.

What exactly is happening on this on-day-shop on Friday 23rd? Will some products be reduced in price? Could someone please explain what exactly is happening?

someone please tell me whats happening on 23rd This Month
thanks

All Apple has said. is:
http://store.apple.com/us/browse/holiday/shopping_event?aid=aic-aos-naus-holiday -november2013-homepage-bf-teaser

Please explain why this happened - and what I should do about it!

Hello!
When I clicked on this link elsewhere in the Apple Communities https://discussions.apple.com/message/15579763#15579763
I was whisked away to see THIS message - can anyone explain why and advise of any action I should take?
Thanks,
David B.

Thanks, Tony!

Please explain what is happening to my drawing:

Similar Messages

Maybe you are looking for