Please, Fix this I think its a BUG
I'm using iPhone 3gs
I have problem with my volume slider. It works fine for, like 7 to 6 hours. Then, the problem of volume slider started to occur. Every time I adjust the volume slider it slides back to where it was. Here is a good example of a guy who has the same problem. http://www.youtube.com/watch?v=ajsMXBo5fXM Please, take a look at 1:54 min.
I have the way to fix the problem, though, is to restart iPhone. but I dont want to restart my iPhone everytime this problem occur
I don't know whether its the hardware or software problem, but PLEASE fix this or gimme the solution.
By the way, it happens with both FW3.0.1 and 3.1
I thought upgrading the FW would help but its not!
Thank you for ur kind answer.
PS. Is there anyone who has the same problem as mine??? How do u solve it??
I am having this same type of problem which I have posted in here already.
http://discussions.apple.com/thread.jspa?threadID=2085835&tstart=0
My problem is when I am using my phone hooked up through the headphones in my car, every now and then the volume will slide on its own either all the way up or all the way down and the volume picture will be stuck on. The only way to stop this is to turn the phone off and then back on. It doesn't happen all the time and I guess I am too lazy to call Apple or go to a store and my question still has not been answered on this forum. Up until now I have not heard anyone else having this problem and yours is very close to what I am experiencing but at the same time different. I will try the resetting of my phone to see if that works. Thanks for your post.
Similar Messages
-
Apple, please fix this bug. Sending scanned images to "Pictures" is not what I want nor what I was able to do in every previous operation system. I want to save all scanned items in a specific folder - NOT "PICTURES" Please fix this bug NOW!
I only use Image Capture, so I can't speak for other software.
Here is how I select a Scan To destination:
If you are using the minimal details screen, you should have the same submenu to the left of the page size. -
After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.
Hi Midnightbrat,
Welcome to the Support Communities!
The troubleshooting steps for the camera on the iPad are similar to the iPhone: I've highlighted the pertinent steps below:
Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
Try turning the iPad off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try switching between the front and the back cameras to verify if the issue persists on both.
I hope this information helps ....
Have a great day!
- Judy -
Hey. So I recently just upgraded from my iPhone 5 to an iPhone 6 Plus. I am very impressed with how smoothly it is working. The graphic enhancements are amazing, too! However, I noted a few bugs that are still there since iOS 8's debut and they are kinda annoying and I want apple to get rid of them. First of all -- this one is EXTREMELY annoying -- is the multitasking feature. I love the way it works, but, um, it shows content that no longer exists. For example, say that you were about to close ten tabs from the multitask bar. But before you did that, you were on safari and you finally closed a web page. Once you click on the home button and you double press it, say you scroll to the safari app, you see the content you were recently viewing even though it's not really there. I'm sorry this is kinda hard to understand, I'm only 14. Another noted bug also involves the home button. Say you are on the weather application. You go to the multitasking bar and you close the tab. Just as you are about to, you repeatedly press the home button before it fully closes the application. Once its closed, you get stuck on a blank home screen, or in some cases, your left without your status bar (carrier, time, battery, etc.). One final thing I want to jot down is a new feature. I love iOS 8's capabilities, but it needs something. A few software update(s) ago, I remember apple added a feature to switch between 2G, 3G, and 4G along w/ LTE. I already know that it varies upon your carrier if they released 4G or not. But I want to be able to use 2G for battery saving and data consuming purposes. I only have 300 MB on my plan (AT&T), and I'm pretty sure phablets use a whole lot of data. I want to be able to switch between 2G, 3G, and 4G LTE, and I'm pretty sure other people do too. That's all I have to say. Please fix this apple, or are there any solutions to prevent these errors? Thanks.
— BrianMy first question is why are you going in the recents and removing items at all? Unless an app is actively misbehaving, there's no reason to do this. You might want to review this article:
Understand multitasking and background activity on your iPhone, iPad, or iPod touch - Apple Support
I've never experienced the error you're attempting to describe. But then, I can't figure out why you're throwing in that extra tap on the Home button.
The presence or absence of the ability to switch to 3G or 2G is carrier dependent. The carrier, not Apple determines if that setting is made available. In the U.S., carriers are in the process of deprecating their older, slower networks. They don't want you using them unless absolutely necessary because the newer networks are unavailable. The older networks don't have nearly the capacity of the newer ones. -
Zoom option in accessibility enabled automatically and icon become so large. So not able to access (even call any no.) phone. Please fix this problem.
Update: I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure? -
Feedback ---please fix this oversensitivity
I use garageband and Logic Pro.
I can't figure out why Garageband always has feedback and Logic doesn't.
Please fix this issue....It's the only thing I'm dissatisfied with.
It seems as though you could fix it in your next update. It's a real problem.
I was trying to record with an external mic using the Apogee duet and there was still feedback which shut down recording in the middle of a paid session.
Thank You~yes, the problem isn't even audible...the recording just stops and the screen gets a message stating that there is feedback.
I hate it..
I use Garageband sometimes for its ease and quick composing on the road and sometimes find myself with a pro sounding mix and want to take it farther and want to record external sounds as well...like a Sitar for instance in this case.
we were even several feet from the computer.
If I'm composing and recording in Logic, no feedback shutting down the program.
I'm so frustrated.
~S -
Hi, I already finish download osx maountain lion after 2 attempts for my macbook pro retina. and when I want to sign out from my account at app store, it crash and some crash report show up. and if I sign in it happen also, but the app store still can be run after got the crash report, and I already sent the report to apple. do anyone got this problems ? and for apple : please fix this problems !
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!
Try:
- Powering off and then back on your router.
- Anything else here
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
The scroll feature(middle button) is not working on the new firefox 4. So because of this I need to move the scroll bar to move the page. This is very irritating problem, if you are a guy who uses the middle button to scroll. Can you please fix this..
Thanks!!!I updated to Firefox 4.01 today and the middle scroll button on my Lenovo T400 stopped working. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 from here http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html and then uninstalled the "Thinkpad Ultranav Driver" from Add/Remove programs rebooted and then installed the updated utility and driver (another reboot) and it now works perfectly.
So glad to get this working again. -
i am having problems with my burst mode on my iphone 6 plus it is slower than the facetime camera after i updated to ios 8.3 apple please fix this issue i am fed up with all your mistakes
Gerald
If you had taken time to read the Terms of Use you agreed on joining this Community today you would have realised that Apple is not here
neither reading nor responding on this User Community
http://www.apple.com/feedback/ -
The ipad safari on facebook will echo characters on the search feature. Please fix this STUPID error! At the least, investigate it and come to a suitable response. Stupid things like this are making me lose faith and interest in Apple products.
This is a user Forum, No one here works for Apple.
If you can be a bit more clear with what your problem is, maybe someone here can help you find a solution. -
My screen is completely dimmed out. I can barely see my screen now. Please fix this
I was working on my assingments, and after some time my screens brightness has gone very low. I just cannot see my desktop, but my laptop is working just fine. Please fix this display issue. So, now I work on my laptop by connecting a HDMI cable from my Laptop to TV.
Try the basics from the manual.
Restart.
Reset.
Restore. -
I NEED MY VERIFICATION EMAIL SO I CAN DOWNLOAD APPS I'VE BEEN WAITING FOR EMAIL SINCE LAST DAY..PLEASE FIX THIS HELP ME..THANK YOU
This is a user-to-user forum hosted by Apple. You are only talking to other users here not Apple.
If you you wish to talk to Apple Support use http://www.apple.com/contact/ -
I recently upgraded my ipod Touch (4th Gen) to the new ios 6.0.1 software. Now it has trouble syncing, freezing up while syncing and keeping music on it without deleting it. I tried restoring it, but can't even downgrade it. PLEASE APPLE!!! PLEASE FIX THIS!!!
If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
Version 8.0 self installed the other day. My computer immediately began having problems. I uninstalled 8.0 TODAY and it just reinstalled itself. I NEVER use any software version that ends with .0 - please fix this problem or I'll switch to another browser
'''I fixed mine by removing the Ask.com extension.'''
Tools
Add-ons
Settings icon
View Recent Updates
Ask.com '''DISABLE'''
Running FF 8.0 on Windows 7 (64-bit)
Maybe you are looking for
-
How Do I Transfer Songs To A New Computer?
Hi there, Just today I got a new computer and now have to use this for my iPod. I transfered all of my songs with a External Hard Drive. When I added the songs to the library, the songs I got off of the iTunes Music Store on my old computer wouldn't
-
Exchange server 2010 cached mode vs no cached mode
I have end users who are experiencing when they start up outlook 2010 hanging outlook when they click on new email or respond to email. It last for about 3 to 5 minutes. Then the client works normally also if you wait for 5 minutes that issue does no
-
how to write ddl statements in function. give me with example how to to dml statements in function.give me sample code. i am calling one function in sql experession. that function constainf the dml statemsts. how to write that function.
-
64 bit Windows on Yoga 2 tablet
Well this doesn't sound good. My Lenovo Yoga Tablet 2 13-inch model has 4GB of RAM, but due to the 32-bit OS I'm able to access ~2.5GB of it. Hopefully with Windows 10 Lenovo will send out updates for a 64-bit UEFI BIOS and then able to go with a 64-
-
Updating to IOS 5 My Iphone fails in security copying
Updating my Iphone 4 to IOS 5 the security copying fails. anyone who can help?