Please for theses bo technical questions

Post Author: [email protected]
CA Forum: Migration to XI R2
1.      how many members a project contains and what are their roles and responsibilities?
2.      How many no of universes and reports a project contains?
3.      Two typical sceneriou2019s while creating universes and Reports?
4.      what type of errors you will get, while creating the deski/webi reports?
5.      what type of errors you will get, while maintaining the deski/webi reports?
6.      what type of errors you will get, while creating the Universes?
7.      what type of errors you will get, while maintaining the universes?
8.      who will provide universe specifications, and how they will be?
9.      who will provide Report specifications, and how they will be?
10. How to test Universes / Reports?
11. when you will go for deski reports and when you will go for webi reports ?
12. what is the time required to create universes and reports?
13. what type of modifications you done in case of universe and reports?
14. How to increase the performance of Universes?
15. How to increase the performance of deski/webi reports?
16. when you will go for linking and merging universes?
17. what type of errors you faced in migration projects?
18. how to work with team in case , all are assigned to particular universe/report?
      (different useru2019s contains different usernames)
19. who will schedule universes / reports and how?
20. what differences between the scheduling options in BO 6.5 and XI R2

Post Author: rameshbalajiv
CA Forum: Migration to XI R2
Hi:
For most of your questions, please refer the BOE XIR2 Administration, Universe Design and Report Design Manuals.
4.      what type of errors you will get, while creating the deski/webi reports?
5.      what type of errors you will get, while maintaining the deski/webi reports?
6.      what type of errors you will get, while creating the Universes?
7.      what type of errors you will get, while maintaining the universes?
For the above questions, unless you create/maintain new/existing universes and reports, you will never know what errors you get into.
Experiment with evalulation copy of BOE with sample database attached.
12. what is the time required to create universes and reports?
- depends on complexity of universe and reports that you intend to develop.
14. How to increase the performance of Universes?
Make sure universe doesn't have traps. It has proper relationships between tables defined and each objects characterstics
(dimension, detail and measure) defined/identified properly. Review Universe design manual for extended help.
16. when you will go for linking and merging universes?
You can develop the universes that can used by other universes as links - just like master universe and child universes.
18. how to work with team in case , all are assigned to particular universe/report?
      (different useru2019s contains different usernames)
Each user can export the universe to repository once its developed. If other user want to modify, he or she can import the universe
from Repository to work on. Make sure to add comments in the history to track the changes. Once its exported, it will overwrite
existing universe in the repository.
19. who will schedule universes / reports and how?
Who ever has the schedule authority in the Central Management Console for the reports, they can schedule reports.
Review various security levels to access the BOE in the Admin Manual.
8.      who will provide universe specifications, and how they will be?
9.      who will provide Report specifications, and how they will be?
Universe/Report specifications - its like how the team come up with Application design.
The team responsible to develop, they have to design the universe by selecting appropriate tables and selecting
fields that are needed and assigning appropriate characterstics.
Again experiment with sample database on BOE XIR2 and develop reports using crystal reports to get good handle on each options.
Ramesh V.

Similar Messages

Answers please for these questions

Hi,
The following are some questions which I have faced in an interview recently ... Can I get the answers for these ?
1) In which format oracle stores the data ?
2) How many cursors can I open ? If I want to limit the number of cursors what changes should I do ?
3) Write a query using emp table, which shows only rows between 4 to 6 (only 4th, 5th and 6th record should be displayed) ?
4) Write a query using emp table, which displays even records and odd records ?
5) I have declared 3 procedures in a package declaration, if I declare only 2 procedures in package body, does it show any error ?
6) If I declare a variable in package specification say x number and if I declare same variable within package body with some value, first of all, does oracle allow me to do that ? If yes, if I want to refer the value of that variable (declared in specification) how can I refer ?
7) If i update sal of an employee from 1000 to 2000 (emp table), then I give select statement, after that I give alter command (to change length of ename), then give select statement again, then give rollback, then give select again .... what's value of sal for that employee (answer is 2000, since alter command commits all the changes to the database) .. Now my question is, if there are multiple instances running (with same username and password), can all the users see the change in the salary when the 1st user gives the alter command ?
8) Write a query to display duplicate records of the table (taking emp table as an example)
Regards

1) In which format oracle stores the data ?
     http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/intro.htm#sthref35
2) How many cursors can I open ? If I want to limit the number of cursors what changes should I do ?
     http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams138.htm#REFRN10137
3) Write a query using emp table, which shows only rows between 4 to 6
   (only 4th, 5th and 6th record should be displayed) ?
4) Write a query using emp table, which displays even records and odd records ?
     For both 3 and 4 the question you must ask is on what column the order is determined. I
     assume that the order is on empno.
     Answer for 3rd question.
     select *
       from (select row_number() over(order by empno) rno, e.*
              from emp e)
      where rno between 4 and 6;
     Answer for 4th question.
     This is a home work for you. Hint is use the above query and modify a bit you get the answer.
5) I have declared 3 procedures in a package declaration, if I declare only 2 procedures
   in package body, does it show any error ?
     You can try this by yourself. Just create it and see.
6) If I declare a variable in package specification say x number and if I declare same
   variable within package body with some value, first of all, does oracle allow me to do that ?
   If yes, if I want to refer the value of that variable (declared in specification) how can I refer ?
        You can try this by yourself. Just create it and see.
7) If i update sal of an employee from 1000 to 2000 (emp table), then I give select statement,
   after that I give alter command (to change length of ename), then give select statement again,
   then give rollback, then give select again .... what's value of sal for that employee
   (answer is 2000, since alter command commits all the changes to the database) .. Now my question is,
   if there are multiple instances running (with same username and password), can all the users see the change
   in the salary when the 1st user gives the alter command ?
        The answer would be YES. That is the purpose of COMMIT. Once data is commited
        then its visible to other sessions. And this one can also be tried by yourself.
8) Write a query to display duplicate records of the table (taking emp table as an example)
     I will leave this one as home work for you. Hint is you can use eith GROUP BY or
     check out analytic function COUNT()...

Common Technical Questions ( Discovery/Analysis Phase )

Hi All,
Could some one please post the Common Technical Questions which need to be asked to Customer at the Discovery/Analysis Phase.
I mean common questions like Different types of Clients in SAP R/3, Procedure of Transports to be relased to Production , Approvals/Authorizations for Testing, Testing Clients etc.
Thanks in advance.
Best regards,
Prashant

Hi All,
Could some one please post the Common Technical Questions which need to be asked to Customer at the Discovery/Analysis Phase.
I mean common questions like Different types of Clients in SAP R/3, Procedure of Transports to be relased to Production , Approvals/Authorizations for Testing, Testing Clients etc.
Thanks in advance.
Best regards,
Prashant

Help please what can i do i have a apple id that i have had scince i was in year 6 i have recently been unable to buy music or apps unless they are free because it asks for these security questions that i have no idea what the awnser is

help please what can i do i have a apple id that i have had scince i was in year 6 i have recently been unable to buy music or apps unless they are free because it asks for these security questions that i have no idea what the awnser is help me please

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page should let you reset them : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

Can any one give me answer for these questions

Can any one give me answer for these questions. I got these questions from net plz post the answers you know
ABAP CERTIFICATION QUESTIONS
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
78. The TABLES statement declares a data object.
A: True
B: False
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: Value

ANSWERS :
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
Ans : C
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
Ans : D
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
Ans : C
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
Ans: C
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
Ans : A
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
Ans : B
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
Ans : B
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
Ans : C
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
Ans :
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
Ans : C
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
Ans : D
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
Ans : C
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
Ans : B
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
Ans : B
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
Ans ; A
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
Ans : A
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
Ans : A
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
Ans : A
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
Ans : A
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
Ans : D
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
Ans : A
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
Ans : C
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
Ans ; C
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
Ans : A
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
Ans ; C
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
Ans : B
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
Ans : B
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
Ans ; A
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
Ans : A
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
Ans : B
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
Ans : C
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
Ans : A
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
Ans : B
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
Ans : A
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
Ans : A
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
Ans : B
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
Ans :
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
Ans : D
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
Ans : A
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
Ans : C
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
Ans : D
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
Ans : C
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
Ans : B
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
Ans : A
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
Ans : D
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
Ans : A
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
Ans : A
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
Ans : A
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
Ans : A
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
Ans : B
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
Ans : B
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
Ans : B
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
Ans : B
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
Ans : A
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
Ans : B
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
Ans : C
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
Ans : B
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
Ans : A
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
Ans : D
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
Ans : B
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
Ans : A
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
Ans : D
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
Ans : C
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
Ans : B
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
Ans : B
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
Ans : B
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
Ans : D
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
Ans : A
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
Ans : D
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
Ans : C
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
Ans : A
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
Ans : C
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
Ans : B
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
Ans : D
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
Ans : B
78. The TABLES statement declares a data object.
A: True
B: False
Ans : A
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
Ans :
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
Ans : A
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
Ans : D
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
Ans : B
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
Ans : C
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
Ans : C
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
Ans ; A
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
Ans : A
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
Ans : D
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
Ans : D
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
Ans : D
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
Ans :
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
Ans ; C
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: Value
Ans : B

Please help!! I have iPhone 4 so does my wife, we each have our own apple id's for these devices. We have just got an ipad to share for at home use. Is there a way to have both our id's on the ipad to share our music photos etc?

Please help!! I have iPhone 4 so does my wife, we each have our own apple id's for these devices. We have just got an ipad to share for at home use. Is there a way to have both our id's on the ipad to share our music photos etc?

For the purposes of 'refreshing' your question so that others more expert can comment here is a link you should read-
http://apple.stackexchange.com/questions/27070/how-many-apple-ids-should-one-hou sehold-have

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
Please please post here.
Thanks
Tiaan

Greetings fcit@!A,
After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario

I have no clue as to what my security question answers are and since this is my first purchase from my mac book it is asking for these. What do i do?

I have no clue as to what my security question answers are and since this is my first purchase from my mac book it is asking for these. What do i do?

You won't be able to change your rescue email address until you can answer 2 of your questions, you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312

Please fix these errors for me...

Here is my code...
When I compiled it, it said
Exception in thread "main" java.lang.NullPointException
at java.awt.Container.addImpl(Unknown Source)
at java.awt.Container.add(Unknown Source)
at javax.swing.JFrame.addImpl(Unknown Source)
at java.awt.Container.add(Unknown Source)
at SecondsCalc.<init>(SecondsCalc.java:43)
at SecondsCalc.main(SecondsCalc.java.166)
Please fix these errore for me..Thank you!!
import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
public class SecondsCalc extends JFrame
private JPanel panel;   // To reference a panel
private JLabel messageLabel1; // To reference a label for days
private JLabel messageLabel2; // To reference a label for hours
private JLabel messageLabel3; // To reference a label for minutes
private JLabel messageLabel4; // To reference a label for minutes
private JTextField daysTextField; // To reference a text field for days
private JTextField hoursTextField; // To reference a text field for hours
private JTextField minutesTextField; // To reference a text field for minutes
private JTextField secondsTextField; // To reference a text field for seconds
private JButton calcButton; // To reference a calculate button
private JButton exitButton; // To reference a exit button
private final int WINDOW_WIDTH = 310; // Window width
private final int WINDOW_HEIGHT = 100; // Window height
Constructor
public SecondsCalc()
// Set the window title.
setTitle("Seconds Calculator");
// Set the size of the window.
setSize(WINDOW_WIDTH, WINDOW_HEIGHT);
// Specify what happens when the close button is clicked.
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
// Add a GridLayout manager to the content pane.
setLayout(new GridLayout(6, 1));
// Build the panel and add it to the frame.
buildPanel();
// Add the panel to the frame's content pane.
add(panel);
// Display the window.
setVisible(true);
The buildPanel method adds a label, text field, and
add buttons to a panel.
private void buildPanel()
// Create a label for days to display instructions.
messageLabel1 = new JLabel("days");
// Create a text field for days 10 characters wide.
daysTextField = new JTextField(10);
// Create a label for hours to display instructions.
messageLabel2 = new JLabel("hours");
// Create a text field for hours 10 characters wide.
hoursTextField = new JTextField(10);
// Create a label for minutes to display instructions.
messageLabel3 = new JLabel("minutes");
// Create a text field for minutes 10 characters wide.
minutesTextField = new JTextField(10);
// Create a label for seconds to display instructions.
messageLabel4 = new JLabel("seconds");
// Create a text field for seconds 10 characters wide.
secondsTextField = new JTextField(10);
// Create a calculate button with the caption "Calculate".
calcButton = new JButton("Calculate");
// Create a exit button with the caption "Exit".
exitButton = new JButton("Exit");
// Register the action listeners.
calcButton.addActionListener(new CalcButtonListener());
exitButton.addActionListener(new ExitButtonListener());
// Create a JPanel object and let the panel
// field reference it.
JPanel panel1 = new JPanel();
JPanel panel2 = new JPanel();
JPanel panel3 = new JPanel();
JPanel panel4 = new JPanel();
JPanel panel5 = new JPanel();
JPanel panel6 = new JPanel();
// Add the label, text field, and button
// components to the panel.
panel1.add(messageLabel1);
panel2.add(messageLabel2);
panel3.add(messageLabel3);
panel4.add(messageLabel4);
panel1.add(daysTextField);
panel2.add(hoursTextField);
panel3.add(minutesTextField);
panel4.add(secondsTextField);
panel5.add(calcButton);
panel6.add(exitButton);
add(panel1);
add(panel2);
add(panel3);
add(panel4);
add(panel5);
add(panel6);
CalcButtonListener is an action listener class for
the Calculate button.
private class CalcButtonListener implements ActionListener
        public void actionPerformed(ActionEvent e)
            int seconds; // The number of seconds
            int min;
            int day;
            int hour;
            long result;
            // Get the text entered by the user into the
            // text fields.
            day = Integer.parseInt(daysTextField.getText());
   hour = Integer.parseInt(hoursTextField.getText());
            min = Integer.parseInt(minutesTextField.getText());
            seconds = Integer.parseInt(secondsTextField.getText());
   //Actullly gettext method returns string and you need to convert it into int or double value using Integer.parseInt method.
            // Calculate to seconds.
   result = (day *((hour * 60 * 60) + (min * 60) +seconds));
   // Display the result.
             JOptionPane.showMessageDialog(null, result + " seconds");
Private inner class that handles the event when
the user clicks the Exit button.
private class ExitButtonListener implements ActionListener
public void actionPerformed(ActionEvent e)
   System.exit(0);
public static void main(String[] args)
SecondsCalc ac = new SecondsCalc();
}

fgb wrote:
Exception in thread "main" java.lang.NullPointException
at SecondsCalc.<init>(SecondsCalc.java:43)
at SecondsCalc.main(SecondsCalc.java.166)Something is null on line 43. What does that line do and why is it needed?That's right!!
I did not need to put line 43, which was
// Add the panel to the frame's content pane.
add(panel);
Thank you very much!!!

When reopen Premier Pro CC, get message "missing media for these clips". I haven't moved files or anything. Please help.

When reopen a project in Premier Pro, I get the error message "missing media for these clips" and a listing of every file in the project.
When try to view, just get thumbnails with question marks.
What am I doing wrong?
Thanks

Is the media on an external drive?

Hello I have a problem in calculating the apple id Can you help me please I forgot answer security questions for your account How can knowledge Please help Please reply as soon as possible I can not buy from camels Store And the rest of the account ba

Hello
I have a problem in calculating the apple id Can you help me please
I forgot answer security questions for your account How can knowledge
Please help
Please reply as soon as possible
I can not buy from camels Store
And the rest of the account balance $25
Message was edited by: lingo azam

I think you mean App Store.
Rescue email address and how to reset Apple ID security questions

HT201250 I have had my mac stolen, I have an external HD I connect via USB for these time machine backups, I now have a new replacement mac and wish to restore from my external HD, migration assistant doesn't seem to recognise or see my drive ? please hel

I have had my mac stolen, I have an external HD I connect via USB for these time machine backups, I now have a new replacement mac and wish to restore from my external HD, migration assistant doesn't seem to recognise or see my drive ? please help

See Pondini's Excellent information here...
Setting-up a new Mac from an old one, its backups, or a PC
See the Second Chance to Use Setup Assistant here...
http://Pondini.org/OSX/SetupLion.html

Any body can tell the solution for these questions?

1) If in case we r using OEM Grid controller,at that time database is running slow.so we can do the database is up , at the time what we have to do and how to clarify this problem ?
2) we r using 4 databses and we have multiple segments of 4 databases...users can use heavly for all databases segments @ that time databases contain heavy burden, so this case arise what we have to do for reducing the burden for databases?
Thanks, for giving sol. for these questions......

No wonder, you didn't get answers to these questions, because this is not the right forum, and also the questions are very vague.
user13096226 wrote:
1) If in case we r using OEM Grid controller,at that time database is running slow.so we can do the database is up , at the time what we have to do and how to clarify this problem ?
2) we r using 4 databses and we have multiple segments of 4 databases...users can use heavly for all databases segments @ that time databases contain heavy burden, so this case arise what we have to do for reducing the burden for databases?
Thanks, for giving sol. for these questions......

TS4268 When I text someone back at certain times it is saying I'm texting a three digit number which is an international number when it's really someone I knows number. What is going on? I'm gettin charged for these texts. Please help thanks

When I text someone back at certain times it is saying I'm texting a three digit number which is an international number when it's really someone I knows number. What is going on? I'm gettin charged for these texts. Please help thanks

Hi Harm,
Thank you for the response and compliments. I'm just in the process of testing everything. I will deffinately get back to you to let you know the answer.
Here is the g spot of the source clip. Sorry for the mistake.
Thanks again, and hopefully by this afternoon, or early tomorrow, I'll get back to you!
Saad

A1-question (please for answer}

Hi
I bought yesterday Lenovo a1-07 and i installed some apps , which aren't working after update( no , reinstall doesn't work).
The question is how can i make downgrade to the "box stock firmware".? ( sorry i don't remember version , but i think everybody know what about i'm talking about
Please for help and thank you in advance !

In the settings menu there is an item called Privacy., Under that heading you will find Restore Factory Default. This will remove all data and reset the A1 to factory default state.
IdeaPad A1-07
iPhone 3GS

Please for theses bo technical questions

Similar Messages

Maybe you are looking for