Please give us a security update for 10.0.1 on Windows!!!

Dear Adobe.
It's good that you got Protected Mode for 10.0.1 in place.
However, relying on this and NOT issueing a security update for all us poor souls who had to DISABLE protected mode because there were some incompatibilities with other applications is just ridiculous... It's like "Why would Microsoft Patch Windows? There is a Windows Firewall enabled by default, this is sufficient."
Please adobe, release that security update!!!
Thank you.

Not patched until June 14, 2011 means:
     83 days of not being patched and vulnerable.
                   OR
     1999 Hours of not being patched and vulnerable
                   OR
     119,934 Minutes of not being patched and vulnerable
                   OR
     7,195,971 Seconds of not being patched and vulnerable
It all is the same if you do not have "Protected Mode" according to Adobe's Statement.
It is just another reason to move away from Adobe Products.

Similar Messages

Need security drivers for hp elitebook 8440p in windows 8.1 64bit

i need security drivers for this.... tried the win7 drivers but biometric wont work.. its not even appearing in my control panel please give me working security drivers for elitebook 8440p in windows 8.1

Hi: Try the W8.1 fingerprint driver and security software from a newer Elitebook such as the 8470p... http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5212910&swItemId=ob_134806_1&swEnvOid=4158 http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5212910&swItemId=ob_124362_1&swEnvOid=4158

System exception running Configuration Wizard after installing several security updates for SP

Greetings,
Have a 2 server farm, SharePoint 2013 SP1, SQL and SharePoint. Windows Update has 15 updates downloaded and ready to install, 2 Server 2012 updates and 2 SharePoint updates, 11 Security Updates for SharePoint. So, I said yeah, go ahead and install them late
last night when I figured it wouldn't interrupt folks. (dumb move)
Windows Update took awhile, but no errors during the install. Rebooted the server as required. Once the server was back, jumped onto the server console and ran the Configuration Wizard to apply the updates to SharePoint. No problem, progressed through the
screens saying it was going to update, farm and sql information, etc. Config Wizard was going through the steps, then failed with the message: "Failed to register SharePoint services." and here's a link to the configuration log so have a jolly time
tracking it down, thank you very much.
I found the error in the log (down about 10,000 lines):
04/10/2015 03:00:02 12 ERR Task services has failed with an unknown exception
04/10/2015 03:00:02 12 ERR Exception: Microsoft.SharePoint.SPException ---> System.Runtime.InteropServices.COMException: <nativehr>0x80131904</nativehr><nativestack></nativestack>
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
--- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
at Microsoft.SharePoint.SPListCollection.EnsureListsData(Guid webId, String strListName)
at Microsoft.SharePoint.SPListCollection.get_Count()
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.get_HealthRules()
at Microsoft.SharePoint.Administration.Health.SPHealthAnalyzer.RegisterRules(Assembly assembly)
at Microsoft.Office.InfoPath.Server.Util.HealthAnalyzerRegistration.RegisterHealthRules()
at Microsoft.Office.InfoPath.Server.Administration.FormsService.Update()
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServiceInConfigDB(Boolean provisionTheServiceToo, String serviceRegistryKeyName)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServices(Boolean provisionTheServicesToo)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
So I've been searching around trying to find a clue about this. I tried using PSConfig as well, no dice. I tried using my admin account, the farm account, and the initial setup account, no dice. So I gave in about 3:00 AM and took a break, rather than have
my head hit the keyboard. Left IIS down and SP down. Had some help this morning when someone started things back up for me. sigh. So the users have been in on the sites and doing all sorts of important and critical things, so rolling back to the last
backup is the last, last resort. (Fortunately, I did do a manual backup using a PowerShell script before starting all this.)
Help. Please.
The actual sites are up and seem to be working fine. Central Admin is down though, get a 500 Internal Server Error in the browser, so things aren't correct. Duh. The config wizard didn't finish.
Thanks much,
Steven

0x80131904 translates to COR_E_SqlException. Typically this will be an MDF/LDF file out of space, or the volume that those files reside on being out of space. Check that first, then also check the SQLERROR log file for any issues.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

KB2977326 - Security Update for SQL Server Service Pack 1 repeatedly fails to install

This update fails to install every day when I shut down my computer. Here is the WindowsUpdate.Log:
2014-12-02 15:50:11:469
420 44c
AU #########
2014-12-02 15:50:11:469
420 44c
AU # Initiating install at shutdown
2014-12-02 15:50:11:469
420 44c
AU # Approved updates = 1
2014-12-02 15:50:11:516
420 44c
AU <<## SUBMITTED ## AU: Install updates / installing updates [CallId = {685C12BB-7AA9-4A31-9620-8F306EEE31C3}]
2014-12-02 15:50:11:516
420 44c
Shutdwn InstallAtShutdown starts.
2014-12-02 15:50:11:516
420 1528
Agent *************
2014-12-02 15:50:11:516
420 1528
Agent ** START ** Agent: Installing updates [CallerId = AutomaticUpdates]
2014-12-02 15:50:11:516
420 1528
Agent *********
2014-12-02 15:50:11:516
420 1528
Agent * Updates to install = 1
2014-12-02 15:50:11:531
420 1528
Agent * Title = Security Update for SQL Server 2012 Service Pack 1 (KB2977326)
2014-12-02 15:50:11:531
420 1528
Agent * UpdateId = {E0D65CC4-3B13-4352-BD89-A28C5F4C5017}.200
2014-12-02 15:50:11:531
420 1528
Agent * Bundles 1 updates:
2014-12-02 15:50:11:531
420 1528
Agent * {C076E757-1A4F-44DB-823B-CFFC07CD7D38}.200
2014-12-02 15:50:11:547
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:50:12:327
420 d4c
Report CWERReporter finishing event handling. (00000000)
2014-12-02 15:50:20:548
420 44c
AU WARNING: Pending directive, 'Install Approval', is not applicable
2014-12-02 15:50:24:417
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:50:24:432
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:50:24:432
420 1528
DnldMgr Preparing update for install, updateId = {C076E757-1A4F-44DB-823B-CFFC07CD7D38}.200.
2014-12-02 15:50:25:119
2052 608
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0600) ===========
2014-12-02 15:50:25:119
2052 608
Misc = Process: C:\Windows\system32\wuauclt.exe
2014-12-02 15:50:25:119
2052 608
Misc = Module: C:\Windows\system32\wuaueng.dll
2014-12-02 15:50:25:119
2052 608
Handler :::::::::::::
2014-12-02 15:50:25:119
2052 608
Handler :: START :: Handler: Command Line Install
2014-12-02 15:50:25:119
2052 608
Handler :::::::::
2014-12-02 15:50:25:119
2052 608
Handler : Updates to install = 1
2014-12-02 15:50:25:119
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:52:23:991
420 44c
AU AU setting next sqm report timeout to 2014-12-03 21:52:23
2014-12-02 15:54:39:587
2052 608
Handler : WARNING: Command line install completed. Return code = 0x84b20001, Result = Failed, Reboot required = false
2014-12-02 15:54:39:587
2052 608
Handler : WARNING: Exit code = 0x8024200B
2014-12-02 15:54:39:587
420 16d8
AU >>## RESUMED ## AU: Installing update [UpdateId = {E0D65CC4-3B13-4352-BD89-A28C5F4C5017}]
2014-12-02 15:54:39:587
2052 608
Handler :::::::::
2014-12-02 15:54:39:587
2052 608
Handler :: END :: Handler: Command Line Install
2014-12-02 15:54:39:587
2052 608
Handler :::::::::::::
2014-12-02 15:54:39:587
420 16d8
AU # WARNING: Install failed, error = 0x80070643 / 0x84B20001
2014-12-02 15:54:39:587
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:54:39:711
420 1528
Report REPORT EVENT: {DFA9CDC8-334A-4E57-9588-77B8E980833D}
2014-12-02 15:54:39:587-0600 1
198 101
{E0D65CC4-3B13-4352-BD89-A28C5F4C5017}
200 80070643
AutomaticUpdates Failure
Content Install Installation Failure: Windows failed to install the following update with error 0x80070643: Security Update for SQL Server 2012 Service Pack 1 (KB2977326).
2014-12-02 15:54:39:727
420 1528
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-12-02 15:54:39:727
420 1528
Report WER Report sent: 7.6.7600.320 0x80070643 E0D65CC4-3B13-4352-BD89-A28C5F4C5017 Install 101 Unmanaged
2014-12-02 15:54:39:727
420 1528
Report CWERReporter finishing event handling. (00000000)
2014-12-02 15:54:39:805
420 1528
Agent *********
2014-12-02 15:54:39:805
420 16d8
AU Install call completed.
2014-12-02 15:54:39:805
420 1528
Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates]
2014-12-02 15:54:39:805
420 16d8
AU # WARNING: Install call completed, reboot required = No, error = 0x00000000
2014-12-02 15:54:39:805
420 1528
Agent *************
2014-12-02 15:54:39:805
420 16d8
AU #########
2014-12-02 15:54:39:805
420 16d8
AU ## END ## AU: Installing updates [CallId = {685C12BB-7AA9-4A31-9620-8F306EEE31C3}]
2014-12-02 15:54:39:805
420 16d8
AU #############
jim...

Hello,
Please examine the Summary.txt log file. The following article may help you locate the file on disk:
http://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
If you find the sentence “A failure was detected for a previous installation” on the Summary.txt log file, please repair SQL Server using the following article:
http://msdn.microsoft.com/en-us/library/Cc646006(v=sql.110).aspx
If you find other errors, please share the content of the Summary.txt log file with us.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Security update for AIR 1.5 -- Mac PPC

Adobe Security Bulletin APSB10-16 indicates that AIR v2.0.2 and earlier need to be replaced, but since v2 only works on Mac Intel platforms, I need an update for v1.5.3. If not, what's the work-around? Uninstall AIR?

Hello,
Adobe has discontinued support for PowerPC-based computers and the Windows 2000 operating system on Adobe AIR 2 and will no longer provide security updates for Adobe AIR on these platforms. For full system requirement details, please see our AIR System Requirements page.
Customers are highly encouraged to stay on the latest AIR release available for their platform to ensure that they are on the most secure version available. For access to the last PowerPC supported runtime and SDK (AIR 1.5.3) please see our Archived Adobe AIR Runtime and SDK Versions page.
Thanks,
Chris

Is there a recent security update for OSX version 10.6.8?

Is there a recent security update for OSX version 10.6.8?

I am getting more confused. I have Lion 10.7.5 and thought this would not be susceptible to SSL problem.
I also took Lanny's advice and went to "gotofail.com" and it said I was SAFE.
Can I assume I am OK?
Also,i have an ipod 4g and went to the same gotofail, and it also said I am safe. I have not udated the security patch as do not have sufficient space (need 2.7gig) but someone suggested a go around which I have not tried yet.
I am accessing the net via a Veiizon jet pak, and not using open networks.
Please comment

I need the download for the Security Update for Shockwave Player Active X 12.0.3.133

To Whom It May Concern,
I need the download for Adobe Shockwave Player Security Update for Shockwave Player Active X 12.0.3.133. So far all I have got is the run around. Please can someone help me get this update for my laptop?
Sincerely,
Lisa Newman

Is there a reason you need this SPECIFIC build? Because I was unable to locate it in three different places I looked.
There are FULL installers here: http://www.adobe.com/shockwave/download/alternates/#sp (version 11)
12.0.4.144 is here: http://get.adobe.com/shockwave/otherversions/

306MB security update for Skype for Business

Hi Microsoft or Community,
I went through a list of updates being shown by WIndows update (I'm on 8.1) and was stunned to see this
Security update for Skype for Business(KB3039779) 64Bit: 306MB
Security update for Skype for Business(KB3054946) 64Bit: 100.1MB
What's going on? What happened to the small and light messaging clients? I mean the above update is about 400MB that too, just security. Are you intending to update just skype or is this going to write all over the Windows 8 binaries. I believe the messaging client has to be/can be less that 50MB in total. Use the media, networking and security layers of the host OS, don't rewrite these in the messaging client. In fact the design philosphy from mobiles should carry over.
The biggest advantage MS has here is that you write the OS too where the security and multi-media capabilities should logically be added. If the 400MB above is updating those capabilities then call it a windows update.
For now I will uncheck the update box, so I don't install the above two patches. Please escalate this to MS product management and add to your product roadmap to design and release a compact skype.
Thanks and regards,
A Samel
[Topic title updated by moderator to be more descriptive. Original topic title was: "306MB security update for Skype"]

Skype for Business and Skype for Windows desktop are two totally different products. You may look for help on your issues with Skype for Business on Microsoft Office Support. https://support.skype.com/en/faq/FA34552/i-m-having-issues-with-skype-for-business-where-can-i-get-help

Keep getting a window to install a security update for Firefox 25.0.1. I have installed it 3 times already and still get the notice to install it again.

At least twice a day I get a pop up window alerting me to the need to install a security update for Firefox 25.0.1. I have installed it several times and still I am prompted to install it again. I have received no response from Mozilla on this issue. I had sent in an email about this several days ago.

Please note that all technical support is performed through this site. Mozilla will not respond to emails requiring technical support.
'''Try Firefox Safe Mode''' and updating while in safe mode to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.

KB2925418: Cumulative Security Update for IE _ for Windows 7....Installs crapware and is not Just a security update!!!!

This is about KB/Update KB2925418. IT IS NOT JUST A SECURITY UPDATE. And it will change things you may not want changed for example, no where does it tell exactly what it is, nor what it will do. NOT COOL. What it does amongst other things is disable Java,
NOT COOL, that breaks IE and stops our Angel Learning environment from working, NOT COOL.
Worse and far more evil than that it put the USELESS crap ware, "Bing Suggested Sites" link back in the favorites bar, THAT IS ABSOLUTELY EVIL. It has NOTHING TO DO WITH SECURITY and DOSE NOT BELONG IN A SECURITY UPDATE. HOW EVIL.
And how do I know it is evil, because just like a virus and the many browser hijackers etc out there it keeps coming back when I have intentionally removed it. ONLY EVIL things have to do that to stay on the desktop. Non evil things go away and STAY AWAY,
when the are told to!!!!!!!!!!!!
Ralph

Hi,
Did you tell us what happened exactly after you install this update?
The detailed description about this update, please refer to this article:
MS14-012: Cumulative security update for Internet Explorer: March 11, 2014
http://support.microsoft.com/kb/2925418
Karen Hu
TechNet Community Support

Cumulative Security Update for Windows XP Service Pack 2 Warning!

Not sure how many of you guys remember the problems associated with the Windows XP Service Pack 2 when it was first released, but the latest Cumulative Security patch completely disabled my Plextor 708A DVD drive and locked up Windows Explorer.
Here is the problem patch:
o Cumulative Security Update for Internet Explorer for Windows XP Service Pack 2 (KB883939)
It caused my Plextor 708A to give off two blinking Amber lights, which according to Plextor indicates the drive is defective. Plextor actually tells you to get a RMA ticket and to return the drive. Luckily I found it odd that my DVD drive became defective after I installed the latest windows update and tried uninstalling the 'fixes' before going that route. Fortunately, removal of one of the 'fixes' solved my problem.
If you find that your DVD or CD Player no longer works after doing a windows update, then do the following:
o Go to Control Panel
o Select Add Remove Programs
o Scroll to the bottom and select Security Update for Windows XP (KB883939)
o Click 'Remove'
o Restart your computer
I might not have the latest security fix right now, but at least my computer is running.
Stu: Can you report this to MSI and have them get in touch with M$?

i will, if this is a problem affecting a lot of users.
has anyone else experienced this problem?

Security Update for windows XP (KB936021)

Hi All,
Many users are facing problem with BI Template builder after upading Security Update for windows XP (KB936021).
If you load xml data into your BI template builder after updating windows security then you will see error <b>Compile error in hidden module module-starter</b>.
So please don't try to update this security. If you already have updated then remove this updates from your system.
Thanks
XMLP/BI Team
[email protected]

Hi Ravi
thanks for the heads up but I would rather you log an SR or a bug to alert development and we can get things fixed rather than make an announcement to the forum. Thanks for the workaround but many folks incl myself are forced to take security updates.
I will alert the dev team and we will investigate the issue with hig priority.
Tim

Security Update for SQL Server 2008 R2 Service Pack 2 (KB2977320)

So i have been trying to install this update on one of our servers since it is showing up on our MBSA scans but it has been failing on one of our machines with the error code: 0x80070643
I downloaded the update and tired to install it manually. The installer returned: There are no SQL Server instances or shared features that can be updated on this computer. If that was true then why is SCCM still pushing the update to the machine and why
is the MBSA showing that it needs the update? Any advice would be helpful. Thanks!

Hi David,
Based on my understanding, the error code: 0x80070643 was thrown out when you install KB2977320 with MBSA. And installation also failed when you download and install update manually.
Regarding the error code: 0x80070643, it can be caused if the MSI software update registration has become corrupted, or if the .NET Framework installation on the computer has become corrupted. To fix this issue, we can follow these methods:
Fix MSI software update registration corruption issues
Repair the .Net Framework
Uninstall and reinstall the .Net Framework
For more information, please refer to this link:
http://support.microsoft.com/kb/976982.
Besides, the security update is released for SQL Server 2008 R2 Service Pack 2, please check the version of SQL Server you are using. About how to check the SQL Server version, please refer to this article: How to tell what SQL Server version you are running
(http://www.mssqltips.com/sqlservertip/1140/how-to-tell-what-sql-server-version-you-are-running/). Then please download the Security Update for SQL
Server 2008 R2 Service Pack 2 from this link (http://www.microsoft.com/en-us/download/details.aspx?id=43957), and retry install it manually.
Best regards,
Qiuyun Yu

Security Update for Windows Server 2012 R2 (KB3042553)

Hello,
Security Update for Windows Server 2012 R2 (KB3042553) has been advised to be critical update to deal with Vulnerability in HTTP.sys which could allow remote code execution.
However due to some reason I am unable to apply the patch to any of the Windows 2012 R2 servers. It errors - The update is not applicable to your computer, when tried to install manually / locally.
I tried to push it via WSUS and the patch is not getting detected by the servers.
Regional language settings are set to match Windows display language (Which is English).
Is anyone else experiencing this issue too? If so is there way to get this deployed please.
Thank you.
Kumar G

Hi Kumar,
I suggest you check the file version of Http.sys and compare it with the one documented in the KB article below:
MS15-034: Vulnerability in HTTP.sys could allow remote code execution: April 14, 2015
https://support.microsoft.com/en-us/kb/3042553
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Security Update for Windows 7 (KB2667402) downloaded through Windows Update, but cannot be installed!

Security Update for Windows 7 (KB2667402) downloaded through Windows Update, but cannot be installed!
OS:
Windows 7 Home Premium, SP1, 32-bit
Windows Update-Error 8024200d
Microsoft Fix it ”Fix the problem with Microsoft Windows Update that is not working” was no use!
The patch "Windows6.1-KB2667402-v2-x86.msu" downloaded directly, but
could not be installed!
System Update Readiness tried, but no use!
PC Tools Security Product disabled, but no use!
cmd.exe tried, but no use!
Microsoft Support through phone, but no use!
So, what to do now?

delete this subkey
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp
and run check for update
http://support2.microsoft.com/kb/2667402/en-us
or please check that the download hasn't already been installed - look in the Installed Updates listing for an entry
If it exists there, uninstall it, and then force a Check For Updates, and retry the install

Please give us a security update for 10.0.1 on Windows!!!

Similar Messages

Maybe you are looking for