Please help! 2.7 Power Mac froze, won't start up past white apple screen!

Hello!
I own a Dual processor 2.7 power mac G5. I only had safari and itunes running when everything came to a freeze without any kind of crash message. Upon force-shutting down the computer, the white screen with the gray apple came up, but would not move past this point! I also did not notice any sounds coming from my machine! I force-shutdown and started it up again and the same occurred. I left the room to jump on this computer (my old, trusty G3 iMac) to try and research while I let it try to start up. When I entered back into the room, I heard the fans going a pretty full-blaze with the white screen w/ apple still starring at me. So I shut it down and came here to post. If it is major issue, at this point, I just want all of my data to be safe. Can someone help me? Any ideas or suggestions? I am not thinking too clearly.

Hi-
Don't give up yet.
There are a few things to try before hauling the machine in for diagnosis.
What I think you should do now, is to follow all the steps (in order) as listed/described in this article:
http://support.apple.com/kb/TS2570
Even if you have tried before, please follow the order of troubleshooting.
Each step helps to isolate the problem.
Removing all but keyboard, mouse, and monitor is important.
Try the Safe Mode boot, followed by resetting the PRAM.
In lieu of repairing with Disk Utility, try and start to your DiskWarrior disk.
Remember, booting to Disk warrior can take several minutes, so be patient.
In the "Remove third-party RAM and internal hardware" step, try removing and reseating the RAM, and graphics card, attempting to boot after RAM, and again after graphics card.
Instructions for removal and replacement are here:
http://support.apple.com/kb/TA22565
Also, it wouldn't hurt to try booting the G5 to firewire target disk mode.
but I wonder what my G5 (the fans, in particular) would make of that interaction. hmm . . .
The fans are just noisy. They will insure that overheat damage doesn't occur.
If the firewire boot is successful, it may be wise to copy your files so that you can try a reinstall of the OS, should that be necessary.
Also, again worst case, check for coolant leakage:
http://www.fusina.net/G5coolantleaks/gallery.php
http://www.xlr8yourmac.com/systems/G5coolantleaks.html

Similar Messages

My macbook 2007 won't start up past the logo screen.

My macbook 2007 won't start up past the logo screen. I've tried to boot the computer off the install dvd that came with it but it comes up with a box saying that Mac OS X can't be installed on this computer. It has a yellow triangle over a hard drive in the box. What do I do?

You need to start the MacBook with the original DVD that shipped with the MacBook. then run disk utility on your hard drive to repair it, also repair your permissions.

My computer won't start up past the gray screen

My computer won't start up past the gray screen and then shows up with the forbidden sign where the apple logo should be. I have tried booting in safe mode and PRAM and neither works. Any suggestions on what I should do next? Or any idease of what might be wrong?

I had the same problem, I believe it is called a kernal panic. They had to replace my hard drive. I did have apple care or it would have cost $450. The guy at the genius bar did some tests to see if he could fix it, he couldn't, so I had to have the hard drive replaced.

G5 mac wont boot up past white apple screen

My kids mac wont boot up past the white apple screen. I can here everything running but the monitor starts to get all static and scan lines with a reddish tint to it. I tried the commandoption+pr but it still wouldn't boot-up past the white apple screen. Not sure what else to do. Any help would be greatly appreciated. Thanks in advance

Hi there Peter,
Not cheap anyway you look at it sorry, professional Data Recovery being the most expensive.
Unfortunately, Disk Utility can't fix all that much, and the only other Apple Options are erasing the HD, or installing OSX to a second drive, then using Migration Assistant to move stuff over to the new HD.
If Disk Utility or fsck should fail to repair it, your best bet is DiskWarrior from Alsoft, you'll need the CD to boot from if you don't have another boot drive...
http://www.alsoft.com/DiskWarrior/
Your best bet is DiskWarrior, you need the CD/DVD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius 2…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro 4…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83
Data Rescue II...
http://www.prosofteng.com/products/data_rescue.php
This one would require another HD with plenty of space to recover to.
You should use another Boot Disk or other Mac with this one in Target mode to do the recovery.
They have a free demo to see what it could recover.

Macbook pro won't boot, stuck on white apple screen

Noticed today, that my macbook pro won't boot . It gets to the white apple screen with the spinner under the apple logo. It stays like this for a long time without doing anything except spinning.
I've powered down and tried to boot up several times.
I have boot camp and windows on my mac and when the white screen appears, I can press Option to bring up which hard drive and the Windows partition will load without any problems.

Exacty what happens when you try to boot up from the disc that came with your computer? Are you holding down the c key? Have you tried holding down the "option key?" Are you able to run the Hardware Test - Intel-based Macs: Using Apple Hardware Test
Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Lion - This will install a "fresh" copy of Lion without archiving old system files but leaves the rest of your files in place.
If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems. It's what you're paying them for.
Out of warranty - take the computer to an Apple store or an AASP. Whichever is more convenient for you.

Mac Pro (early 2008) No chime, pixelated white apple screen

My Mac Pro (early 2008) stopped working this morning. It was working fine yesterday, but did not start today.
i Press the power button, and there is no chime. The fan whirls around and the cd disc drive makes a noise. The startup screen shows up with Pixelated black bars across the whole screen.
this his stays onscreen, freezes for a few minutes, then restarts And continues the cycle of freezing and restarting.
iI've tried to reset the smc and pram and that hasn't done anything.
i've cleaned the inside of the computer, checked the RAM and graphics card, they seem to be in good working order.
does anyone know what's wrong with it?

Hi BDAqua
i tried safe boot. The white apple screen still comes up pixelated but with a grey loading bar at the bottom. Once the bar has loaded fully, nothing happens. it stays frozen on that screen until I have to force it to shutdown by pressing and holding the power button on the front of the tower.
i Tried holding the alt key. It brings up the devices, the screen is still pixelated. Pressing either one of the disk drives, didn't do anything new Unfortunately.
https://mobile.twitter.com/SundeepToor/status/559966340883415040/photos
hopefully you can see what my screen looks like in the link.

Power Mac G5 won't start up after a security update, please help!!!

Hi all,
My Power Mac G5 version 10.4.11 keeps showing a black video, no beep, no start up chim, this occured after updating a security patch 2008-7 from Apple website, asked to reboot then I encountered this mess.
The powerlight is turn on with solid white color. My display also has its powerlight turn on with solid white. But not nothing happens, except the fan noise becomes gradually louder and louder. I wait for hours ... but ...
My system just won't start up. Although I tried to reset the SMU, reseated RAM...
I tried also to re-install the OS by CD but it's impossible to insert it to the DVD tray.
Any help is greatly appreciated, thank you for your time.
Sgmed.

Hi BDAqua,
After weeks of strugle I can use my MAC as normal, but everytime I shut it down, she cannot wake-up, I had to refer to your hints in order to start it up again. So right now I can use my MAC every day with "SLEEP" mode.
She just cannot RE-START or wake up after a SHUTDOWN.
Any suggestion is greatly appreciated, here under I pasted the log file retrieved from Disk Utilities.
(I tried also to reset PMU, SMU and PRAM but nothing helped. Perhaps she is in need of a brand new PRAM battery???
Oct 26 23:54:04: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Preparing to secure free space : “Untitled”
Creating Temporary File
Securely erasing file
Creating Temporary File
Securely erasing file
Secure Erase Free Space stopped after 14 hours.
89.0% complete.
Erase complete.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Group differs on ./private/etc/authorization, should be 80, group is 0
The privileges have been verified or repaired on the selected volume
Permissions verification complete
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Owner and group corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
Owner and group corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
Permissions corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Owner and group corrected on ./Users/Shared/SC Info
Permissions corrected on ./Users/Shared/SC Info
Group differs on ./private/etc/authorization, should be 80, group is 0
Owner and group corrected on ./private/etc/authorization
Permissions corrected on ./private/etc/authorization
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.5 GB (237,882,122,240 Bytes)
Used : 11.2 GB (12,042,969,088 Bytes)
Number of Files : 298,349
Number of Folders : 76,969
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
70 %)
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 27 20:59:00: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,949,358,080 Bytes)
Used : 11.2 GB (11,975,733,248 Bytes)
Number of Files : 298,359
Number of Folders : 76,970
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 28 00:31:37: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 28 18:50:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 28 21:00:10: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Oct 29 19:55:10: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,921,976,320 Bytes)
Used : 11.2 GB (12,003,115,008 Bytes)
Number of Files : 299,521
Number of Folders : 77,045
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 29 20:22:20: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 17:14:49: Disk Utility started.
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,409,587,200 Bytes)
Used : 11.7 GB (12,515,504,128 Bytes)
Number of Files : 299,790
Number of Folders : 77,188
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 19:41:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 31 20:48:58: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,362,040,832 Bytes)
Used : 11.7 GB (12,563,050,496 Bytes)
Number of Files : 300,773
Number of Folders : 77,858
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 15:48:08: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,411,020,800 Bytes)
Used : 11.7 GB (12,514,070,528 Bytes)
Number of Files : 300,976
Number of Folders : 77,880
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 16:12:13: Disk Utility started.

Help!! My Power Mac G5 won't start up!!

I was working on my computer when all of a sudden everything froze. I tried all the key commands and no response. So, I held the start button until it shut down. Then when I tried to start it back up again after a few minutes, by pushing the start button, only the fan starts. No start up chime. Nothing on my screen. Then the fan starts getting louder and louder like it going to explode! I quickly held the start button again until it shut down. I read through the manual and tried everything it said and still the same thing. I read through alot of the questions and answers on this forum...found alot of similar questions, but no answers that I can use. I tried replacing the surge protector, but still nothing. My business & life is on this computer and stupid me, I didn't back up much! Help!!

Hi Jen:
See if this helps:
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1018.html
"Disk Utility 10.5 Help
Testing and repairing your startup disk
If you have problems with your startup disk, you can use Disk Utility to test and repair it. To do so, you must start up from another disk, such as your Install Mac OS X disc.
Start up your computer using another disk.
To use the Install Mac OS X disc, insert the disc and restart your computer holding down the"C" Key OR (Option key and then select the Install Mac OS X disc and click the arrow).
Open Disk Utility.
In the Mac OS X Installer, choose Utilities > Open Disk Utility.
Select the startup disk you want to repair in the list of disks and volumes, then click First Aid.
Click the button to verify or repair the disk or disk permissions.
Check the S.M.A.R.T. status of your hard disk at the bottom of the window. If it shows "Verified," the disk has nothing wrong at this time. If you see "About to Fail" in red letters, back up your files on the disk as soon as possible and replace the disk."
And:
http://docs.info.apple.com/article.html?artnum=300537
"Troubleshooting: My computer displays no video
If your computer won't display video, here's how to troubleshoot it. Please keep in mind that although your computer may display similar symptoms that prevent it from turning on, this article discusses what to do if the computer won't display video, meaning that when you press the power button:
You may hear a startup chime
You may hear fan or drive noise
You may see the power light on the computer light up
If your computer does not turn on, when you press the power button:
You won't hear a startup chime
You won't hear any fan or drive noise
The power indicator on the computer won't light up at all
If your computer is not responding at all, see the Troubleshooting: My computer won't turn on article instead.
If your computer won't display video but you can hear a startup chime, fans, drive noise, or you see the power light turn on, the first question is whether you have an external display attached (such as a Power Mac G4, Power Mac G5, Mac Pro or Mac mini) or if the display is built-in (such as an iMac, eMac, MacBook, MacBook Pro, iBook or PowerBook).
For external displays
Try these steps to resolve the issue:
Make sure that the monitor is turned on and has power. Make sure that the display's power cord is plugged into a working wall outlet, and that it's properly connected to the power adapter. (To check if the wall socket is working, plug in a lamp or other electrical device.)
Check that all video cable connections to the computer video port and to the monitor are properly connected.
Examine the pins on the video cable connector to make sure they are not bent or damaged in any way.
Connect a known working display (if you have an extra one available). If you see video after doing so, replace your old display.
Reset the computer's parameter RAM. (Click the link for instructions.)
On a Mac mini, reset the computer's PMU. (Click the link for instructions.) For Power Macintosh G3, Power Mac G4, or Power Mac G5 computers, check your user guide for the location of the PMU reset button on the logic board.
Next we're going to check to see if the computer has video when started up from a disc:
Find the Install or Restore disc that came with the computer. Insert the Software Install and Restore disc into your CD/DVD drive. The disc may look something like the picture below.
Shut down your computer.
Once it's off, hold down the C key on the keyboard and start up your computer. This will start up the computer from the Software Install and Restore disc instead of your hard drive.
If you see video when started up from disc, you may have corrupted software. You can use the Archive and Install feature of the Mac OS X installer to reinstall. This kind of installation gives you a fresh version of Mac OS X, but you don't lose any data from the computer as your old information is all archived.
If you tried all of the steps above and the computer still won't display video, contact Apple technical support (1-800-APL-CARE in the U.S.) or take your computer to your local Apple Store or Apple Authorized Service Provider (AASP) for diagnosis.
For built-in displays
Try these steps to resolve the issue:
Make sure that the power cord is plugged into a working wall outlet, and that it's properly connected to the power adapter. (To check if the wall socket is working, plug in a lamp or other electrical device.)
Make sure that the power adapter is properly connected to the power port on the back of the computer.
Reset the computer's parameter RAM. (Click the link for instructions.)
On an iBook or PowerBook, reset the computer's PMU. (Click the link for instructions.)
Next we're going to check to see if the computer has video when started up from a disc:
Find the Install or Restore disc that came with the computer. Insert the Software Install and Restore disc into your CD/DVD drive. The disc may look something like the picture below.
Shut down your computer.
Once it's off, hold down the C key on the keyboard and start up your computer. This will start up the computer from the Software Install and Restore disc instead of your hard drive.
If you see video when started up from disc, you may have corrupted software. You can use the Archive and Install feature of the Mac OS X installer to reinstall. This kind of installation gives you a fresh version of Mac OS X, but you don't lose any data from the computer as your old information is all archived.
If you tried all of the steps above and the computer still won't display video, contact Apple technical support (1-800-APL-CARE in the U.S.) or take your computer to your local Apple Store or Apple Authorized Service Provider (AASP) for diagnosis".
-Robert

Power Mac G5 won't start up (glitching screen)

For the entire day my Powermac G5 (late2005) model has been performing poorly until eventually the screen freezes and a dialog box pops up that says I must hold down the power button and restart my computer. I think this has been happening since I installed the new security update. Now when I start it up it makes the start up noise. begins to load, then the screen becomes glitchy and it freezes up.
Please help me I have a lot of projects I am currently trying to work on and this came totally out of the blue. Is this something I am going to have to ship my computer in to fix? if so how long will it take?
thank you,
Austen
Powermac G5 (Late 2005) Mac OS X (10.3.5)

Hello! Personally, I'm not big on updates unless it's to fix a major problem I have but anyway I would boot from the install disc and run the repair disk function. If you get it running the first thing to do is get your data off in case it's not backed up (which I'm sure it is?). You might also try a safe boot by holding down the shift key at startup. Once you have your data off of it I'd probably download the combo updater so you can run the stand alone updater as opposed to running the software update control panel. Also be sure to repair permissions before and after any future updates. Post back and let us know how you are proceeding. Tom

Dual 1.8Gb power mac G5 won't start up. No chime or video.

I have a dual 1.8Gb power mac G5 that won't start up after the weekend. The computer was being run as a server using OSX 10.3. When my employee came in on Monday she said the fan was running full blast, but there was no video and the computer was totally unresponsive. The computer has been restarted with and without periferials plugged in, reset the PRAM and SMU/PMU/Cuda switch. Tried different monitor. I've put the hard drive in another G5 and it worked fine. I've also noticed that this computer does not click (sounds like a relay) when plugging/unplugging the power cord. I've always noticed my other G5 does this. Any ideas? I'd like to try and fix it myself and save the "Apple Authorized Service Provider" costs. Thanks!
Eric

It doesn't seem to matter if anything is hooked up or not ... mine nor his. I've tried three different power cords in two different locations. I wouldn't know what to "tighten" inside.
Most recently at home I've tried using just the mac keyboard an mouse connected to there own USB ports off the back of the CPU and then the Apple 17" studio display from the ADC output. Still nothing. I then tried the same setup, but with a 17" CRT monitor using the DVI output and the adaptor (finally found the adaptor). It booted up fully once, but then died (I wasn't there when it happened, but when I came back no video, fans on full, and unresponsive). I hadn't had any more success until this morning when I tried to fire it up again, and it came on, but with distorted video (the one that says you need to restart your computer). I'm beginning to think this is a bad power supply problem due to the specific component failure (same bad capacitors as the iMacs), but mine doesn't quite fall within the serial number range (just before).
Thanks for the help!

Power Mac G4 won't start - no activity except light.

I have a Power Mac G4 (1.25ghz, 2.25gb RAM, 80gb HDD) that is having somewhat of a strange problem. Basically it's not powering on at all, the light powers on when you push it but once released it goes out. No sound, no fans, no other activity. However if you hold the button in the light will stay on. It's almost identical to the problem this gentleman had:
http://www.ehmac.ca/mac-ipod-help-troubleshooting/8884-powermac-g4-wont-boot.htm l
No I have already tried reseating all the connections on the board (power, RAM, GPU, etc.), tried booting it with only the original 256mb DDR stick of RAM, booting with known working RAM, and resetting the PMU.
I am thinking at this point it may have to do with the PSU, but I thought I would post here to see if anyone had any other ideas. Apparently I am not the first person to have this issue and was wondering if anyone here had something similar, and how you resolved it. Thanks!

It can be due to the button itself. See this:
http://support.apple.com/kb/TA27071
The power button lives on a separate component called the "front panel board." or "FPB" hereafter. They can fail, and are a much cheaper fix than a new PSU of logic board.
An Apple tech at a nearby college told me a way to test for a bad FPB. It requires that you find one of the original Apple USB keyboards that came with the first iMacs. It's model M2452 and, unlike newer keyboards, has a power button much like teh older Apple ADB boards.
The tech said that, when using the old iMac board, the power button overrides the buton on teh FPB and should start the computer if only the FPB board is bad. If the keyboard switch does not work, then there is something more expensive at fault.

Power Mac G5 won't start up and is beeping

Dear friends,
This morning, my Power Mac G5 started to beep. When I try to restart it, it beeps some more and also makes a clicking sound like a metronome.
The computer won't start up anymore. At startup, it displays a grey screen with a little folder in the center that flashes a question mark and a finder icon.
What is wrong with my excellent computer, and how do I fix it?
Marnie

Marnie Glickman-
Could be a variety of things, but most likely your hard drive is not happy. The flashing question mark means that the system is trying to find a working disk with a valid system on it. Should be the hard drive. Isn't.
Launch from the install DVD of the latest OSX system you have. Under the Apple Menu should be the Disk Utility. Launch it and try repairing your hard drive and see if that does the trick.
If not we dig deeper into this excellent problem.
Luck-
-DaddyPaycheck

POWER MAC G5 WON'T START !! error message: panic: we're hanging here

I recently made an update (several apps were listed with available updates(I was using tiger 10.4.10), next thing that happened (after the update was successfully completed) , a gray screen saying I should restart
my mac. When I did, I couldn't get into my OS!! instead a long list of techy messages appeared on the screen and the last one read: "panic...we're hanging here"
please help I'm supposed to edit an important video and now this happened!!! I read on another forum I should use my restore dvd something like that but I bought this machine on ebay, and it came with many CD's I don't know which is which, right now, what I did is that I put the tiger installation DVD, So I might re-install the whole OS...but I don't know if this is right (aren't I supposed to erase the damaged os first?)
Anyway I hope you can help me, I'm new at mac and I don't want to mess up my computer

First I would try a Disk Repair with Disk Utility, while booted on your Tiger disk.
Apple doc.#106214 covers this subject.
It sounds like you had a Kernel Panic, as shown in Apple doc.#106227.
If the Disk Repair doesn't do it, FJ has some good KP tips.
Or, do everything, in order, in Dr.Smokes Resolving Kernel Panics and don't leave out any steps (most used KP site in the forums).
Quote from Dr.Smoke "My FAQ is a roadmap: start at the beginning and work through to the end, following the instruction in the order specified, including the "If all else fails..." section if a cause or resolution is not found in an earlier troubleshooting step therein"
Cheers!
DALE

Power Mac G5 won't start up

Hello, am new to the forum as I've never had any issues with my G5 - until now.
I have a 1.8GHz G5 that will just not boot up. When I start it I get the grey screen with the Apple logo and nothing else. The fan then fires up and up. Have tried starting it in Safeboot mode. In this mode I can hear the initial chime and some activity for about 5-6 secs and then nothing. I have an extra 2GB of Kingston RAM in the machine that I put in a couple of years ago and apart from this nothing has changed apart from upgrading the OS's.
Can anyone please help ?
Many thanks

This seems totally illogical but the Mac has booted up for the first time in a week !
I tried to boot up in SU mode but it booted up normally !!
You know the only difference with all the other times when it was failing ? I had accidentally left the keyboard/mouse connection unplugged as BDAqua had kindly suggested.
Am currently backing up the HD to an external disk.
My thanks to all that assisted on this.
Cheers

Power Mac G4 won't start up after shut down

I have a Power Mac G4 (dual 1 GHz with 2 GB of RAM) running OS X 10.4.11. It has the mirror drive doors and was once referred to as the “wind tunnel”.
The problem is that it will not start up after it has been shut down unless I first push the reset button. I have tried replacing the battery and resetting the p-ram. When I try to start it without first pushing the reset button nothing happens. The light for the start button doesn’t even come on. But if I disconnect the power, open it up and push the reset button it will start up and run perfectly.
Thank you for any suggestions that you might have.

Thanks BDAqua, it does sound like a bad capacitor. The PSU is one that I put in a few years back when Apple was giving them out so as to reduce the fan noise. I kept the old one until last week when I sent it off to be recycled. I suppose it would be a tough job to find the bad capacitor and I doubt that I would have the skill to replace it even if I could find it. It's not like I really need this power mac since I have a Mac Pro 1,1 but I do occasionally want to run something in OS 9 and I do love this machine for what ever reason. There was remarkably little dust inside but I went over it with a can of dust remover.
Don

Please help! 2.7 Power Mac froze, won't start up past white apple screen!

Similar Messages

Maybe you are looking for