Please help! 6 panel cd insert using InDesign?
I need to design a 6 panel folding cd insert/liner notes using InDesign, but I have extremely limited experience using this program, and I have never done the liner notes before! I don't even know where to start, how to set up the document, etc. I have already designed the cover using Photoshop. If it helps, below is a link to the templates provided by the printer, but of course they don't offer one for InDesign. I'm screwed - please help!
http://www.crystalclearcds.com/artspecs/templates/cdinsert.php
And using XPress with placed PDFs or any other placed art work with live transparency will mean:
At output it will be flattened. For generic XPress features with transparency this can be usually avoided by injecting special comments (PDF marks), but not with placed art work.
XPress cannot export PDF.*
(It's always PostScript or EPS under the hood, distilled to PDF)
For a lengthy discussion about that, starting here (for English speaking readers: sorry, but it's all in German), see this comment (and the following ones) by Thomas Kaiser at Hilfdirselbst:
http://www.hilfdirselbst.ch/gforum/gforum.cgi?post=514250#514250
http://www.hilfdirselbst.ch/gforum/gforum.cgi?post=514273#514273
*It's still unknown if "PDF Export" of Quark XPress will use a true "PDF Library" in the upcomming v10 …
Uwe
Similar Messages
-
Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.
As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
Hi please help me how can I use my iPhone 4 I am at vocation my is not working please help
Hi I am at vocation at Italy I am not able to use my phone please help me how can I use my phone overseas thank u
You need to make your own ringtones in iTunes then sync them to your phone. Follow the directions here:
http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/ -
I can open files on my desktop and I can only open them by right click then open. Please help ASAP. I am using this MacBook for school. Pls help asap
Macbook Pro
System Preference > Trackpad > Point and Click
At the bottom adjust the Tracking Speed slider.
Best. -
Why that when I record a video in my iPhone 4s then I will transfer it to my laptop, the video is in slow motion? Please help so that I can use always my video recording feature. Thanks!
Video is synced from the computer to the iPhone via iTunes. You need to load the video into iTunes, make sure it is iPhone compatible before you do that, and once it is in iTunes, then sync to the iPhone.
Never said what computer OS you were using. Also, the computer processor, amount of RAM can make a difference with HD video. -
My ipod touch has been stuck in recovery mode for like 3 months and ive downloaded the newest itunes but itunes still wont recognize it!!! PLease Help by the way im using a macbook!!!!
PLEASE HELP!!!!!!Have you been through the steps mentioned in this article? iOS: Device recognized in iTunes for Mac OS X
-
My sound button cant function even the sound also not sound but when i received call, it do ring..just when i try to play utube or play music it will never have sound...please help me. now i'm using ios7. It just recently happened.
Hi hayscart,
This article contains steps to try when you are having trouble with the iPhone's speaker:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers,
- Ari -
Please help with the query (INSERT RETURNING BULK COLLECT INTO)
I am trying to write a query inside the C# code where I would insert values into a table in bulk using bind variables. But I also I would like to receive a bulk collection of generated sequence number IDs for the REQUEST_ID. I am trying to use RETURNING REQUEST_ID BULK COLLECT INTO :REQUEST_IDs clause where :REQUEST_IDs is another bind variable
Here is a full query that use in the C# code
INSERT INTO REQUESTS_TBL(REQUEST_ID, CID, PROVIDER_ID, PROVIDER_NAME, REQUEST_TYPE_ID, REQUEST_METHOD_ID, SERVICE_START_DT, SERVICE_END_DT, SERVICE_LOCATION_CITY, SERVICE_LOCATION_STATE, BENEFICIARY_FIRST_NAME,
BENEFICIARY_LAST_NAME, BENEFICIARY_DOB, HICNUM, CCN, CLAIM_RECEIPT_DT, ADMISSION_DT, BILL_TYPE,
LANGUAGE_ID, CONTRACTOR_ID, PRIORITY_ID, UNIVERSE_DT, REQUEST_DT, BENEFICIARY_M_INITIAL,
ATTENDING_PROVIDER_NUMBER, BILLING_NPI, BENE_ZIP_CODE, DRG, FINAL_ALLOWED_AMT, STUDY_ID, REFERRING_NPI)
VALUES
(SQ_CDCDATA.NEXTVAL, :CIDs, :PROVIDER_IDs, :PROVIDER_NAMEs, :REQUEST_TYPE_IDs,
:REQUEST_METHOD_IDs, :SERVICE_START_DTs, :SERVICE_END_DTs, :SERVICE_LOCATION_CITYs,
:SERVICE_LOCATION_STATEs, :BENEFICIARY_FIRST_NAMEs, :BENEFICIARY_LAST_NAMEs, :BENEFICIARY_DOBs,
:HICNUMs, :CCNs, :CLAIM_RECEIPT_DTs, :ADMISSION_DTs, :BILL_TYPEs, :LANGUAGE_IDs,
:CONTRACTOR_IDs, :PRIORITY_IDs, :UNIVERSE_DTs, :REQUEST_DTs, :BENEFICIARY_M_INITIALs,
:ATTENDING_PROVIDER_NUMBERs, :BILLING_NPIs, :BENE_ZIP_CODEs, :DRGs, :FINAL_ALLOWED_AMTs,
:STUDY_IDs, :REFERRING_NPIs) RETURNING REQUEST_ID BULK COLLECT INTO :REQUEST_IDs
However, when I run this query, it gives me a strange error ORA-00925: missing INTO keyword. I am not sure what that error means since I am not missing any INTOs
Please help me resolve this error or I would appreciate a different solution
Thank youYou cannot use (and do not want to in this case) the BULK COLLECT.
create table for_testing
the_id number not null primary key,
some_data number
declare
l_return_value for_testing.the_id%type;
begin
4
insert into for_testing
the_id,
some_data
values
1,
5
returning the_id into l_return_value;
dbms_output.put_line('the return values is ' || l_return_value);
end;
20 /
the return values is 1
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.02
TUBBY_TUBBZ?Is a simple example. In the future, please use the tags to preserve formatting on your code like i have so it remains readable . -
PLEASE HELP! Trouble importing media used in Premiere CS6 into CC
After infinitely trouble with stability in OSX Premiere CS6, I´ve tried to open my project in CC. I get a dialogue box when importing media with heading "Cannot Link Media" and saying "The selcted file cannot be linked because it has 2 audio channel(s) and the clip was created with 1 audio channel(s). Now, these clips had no issues in CS6, but after installing CC, I cannot open anything in CS6 and CC won´t, as stated, accept my clips. Now, I tried to uninstall CS6 to late reinstall it. But Adobe seems to have removed the installer, anyway I can´t find it. SERIOUSLY!. This is EXTREMELY frustrating. PLEASE HELP!
I don't have any sure-fire solutions, but I do have a suggestion: rather than opening the whole CS6 project and going through the whole conversion process, try importing just the sequence(s) from the CS6 project into a new CC project. There are a couple of ways to do so: 1) File>Import, select "Import Selected Sequences," then pick the desired ones, or 2) drill down to the project in Media Browser, which will show you it's contents, then drag and drop the sequence(s) into the Project panel.
I found a few bug reports in the same neighborhood. They were all fixed in the release you're using. But each was specific to a particular file type, so you may have hit on a case that we didn't exercise. It could really help us nail this down if you provided one small clip that CC is balking at and, ideally, a CS6 project containing that clip. -
Please help me urgently (Problem in using delete statement)
Hello,
I want to run delete query where table name should come from a variable .I have written the following procedure but its not working .Could you please help me
DECLARE
processtemplatename VARCHAR2(64);
CURSOR T1Cursor IS
select Process_template_name from ProcessTemplate
where PROCESS_template_ID in
( select PROCESS_template_ID from PROCESSINSTANCE
where process_instance_id in
(select process_instance_id from processinstance where STATUS = 'PI_COMPLETED' OR STATUS = 'PI_REMOVED' ));
BEGIN
OPEN T1Cursor;
LOOP
FETCH T1Cursor INTO processtemplatename;
EXIT WHEN T1Cursor%NOTFOUND;
DELETE FROM processtemplatename WHERE process_instance_id in
( select process_instance_id from PROCESSINSTANCE where STATUS = 'PI_COMPLETED' OR STATUS = 'PI_REMOVED' );
END LOOP;
CLOSE T1Cursor;
END;
I am getting the error
ERROR at line 19:
ORA-06550: line 19, column 27:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 19, column 15:
PL/SQL: SQL Statement ignored
even when i used
DECLARE
processtemplatename VARCHAR2(64);
BEGIN
processtemplatename := 'example1';
DELETE FROM processtemplatename WHERE process_instance_id in
( select process_instance_id from PROCESSINSTANCE where STATUS = 'PI_COMPLETED' OR STATUS = 'PI_REMOVED' );
END;
I am still getting the same error message
Thanks,
Salam.And BTW you do not need that clumsy CURSOR c.. OPEN c.. FETCH c INTO... CLOSE c etc. It is "reserved" for more complex cases when you cannot use:
<pre>
FOR P IN
select Process_template_name
from ProcessTemplate
where PROCESS_template_ID in
(select PROCESS_template_ID
from PROCESSINSTANCE
where process_instance_id in
(select process_instance_id
from processinstance
where STATUS = 'PI_COMPLETED'
OR STATUS = 'PI_REMOVED'
LOOP
EXECUTE IMMEDIATE
'DELETE FROM ' || P.Process_template_name ||
' WHERE process_instance_id in
(select process_instance_id
from PROCESSINSTANCE
where STATUS = ''PI_COMPLETED'' OR STATUS = ''PI_REMOVED''
END LOOP;
</pre> -
Dear Folks:
I have the trial version of Adobe Premier Pro CS4, and I have 64 bit Vista Home Premium. I can not download Flash in order to view the Help Program Tutorial. I am a student at CCBC Essex Campus, and I need to assemble a three minute video for a class. I have Internet Explorer (latest version), and I also have Firefox. Please help me with a solution.
Thank You,
Dan Pasten
111 Alcock Road
Essex, Md. 21221-2110
United States of America
(410) 686-8067For easy searching, download the product user guide PDF(s)
The individual CS5 pages also have links to the earlier user guide pages
CS5 User Guides - online and PDF (right click PDF link to save PDF to your hard drive)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html
Some tutorial links... these MAY not apply to CS4, but it doesn't cost to look
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731
-and http://forums.adobe.com/message/3234794
Encore http://tv.adobe.com/show/learn-encore-cs4/
A "crash course" http://forums.adobe.com/thread/761834
A Video Primer for Premiere http://forums.adobe.com/thread/498251
Premiere Tutorials http://forums.adobe.com/thread/424009
PPro Wiki http://premierepro.wikia.com/wiki/Adobe_Premiere_Pro_Wiki
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935
After Effects Tutorials http://www.videocopilot.net/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
Surround Sound http://forums.adobe.com/thread/517372
Regions and NTSC vs PAL http://forums.adobe.com/thread/951042 -
Please HELP!! I just switched to Lion. I have created multiple websites using iWeb 3.0.4 and despite my having saved their 'domain' files in various locations and using different filenames, upon opening the domain files I keep getting the very last site I published. All the sites were published to third party servers. The domain files (still have a preview that look correct and have different file sizes) but keep going back to the last site published. HELP ME PLEASE!! Are the old files still available?!!
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
Please help!!! trouble using UI Roadmap on a PDK application for EP 7.0
Hello all,
I'm developing a PDK application in wich I would like to use a roadmap UI control. Is this possible to do?. At this moment i'm trying to do this by using
the source code generated by webdympro, this works on a EP 6.0 server but, it doesnt work on a EP 7.0 server. is this version component (EP 7.0) needs some kind
of adjustment or configuration to use the roadmap UI Control within a PDK application or It can be done in another way?
Please Help!!
Regards,
MarianaHi,
I have never worked with the examples but I can tell you how to solve your problem in situation 1. The portal user you use to preview the iView does not have sufficient permissions for the security zone to which the iView belongs.
To set the permissions follow the instructions below:
1) Log into portal with system administration rights
2) Navigate to => "System Administration" => "Permissions" => "Portal Permissions"
3) Open folder "SecurityZones/com.sap/UndefinedSecurityArea/no_safety/Example12/components"
4) Right-click object "ExampleLayer" and choose "Open Permissions" from context menu
5) Set permissions for your user
6) Save changes with click on "Save" button
Best regards,
Martin -
Hello Mac cummunity. aI have owned a lot of macslaptops to emac, imacs,but I have not yet bought a Mac pro tower.
It is time but there are so many options.
Most of the yearly new imac are good for a year then if you need to upgrade it is limited in doing so.
The Mac Pro seems to have the ability to upgrade and expand along with enough speed to process audio, video, and pictures.
But agian there are many options?
quad core? or 12 core?
What type of drive bays? SSD? or HDD?
how many bays?
How much RAM should i be able to upgrade to 32gb or 64gb? please help
Again for using master creative suite from adobe and other PRO type photo, video, and audio applications, --speed and accuracy with the ability to have multiple applications open at the same time.
flashdrive or solid state drives?
please advise
I am looking for a tower Mac Pro ( do they still come with snow leopard installed or are they all Lion?)
again
please advise
thanks
scottAll of those are discussed for last two years.
6-core 3.4GzHz ~$3000 with stock 6GB RAM - replace with 24-48GB.
You probably don't need 12-core but see what you can configure
You can find a lot if you read through and try to digest (give yourself a day or three)
www.macperformanceguide.com be sure to click on Articles & Topics
PCIe SSDs can add fast 1TB storage too
An SSD boot drive and 4 x whatever you want - 4 x 2TB probably minimum, or 4 x 10K WD VR 1TB (the fastest non-SSD). -
Please help - FCP won't export using DVCPro HD (or any HD) settings.
Please help. I'm under a tight deadline to deliver.
The native setting for both the project and footage is DVCPro HD 720p60 but when I export with this setting, or any other HD setting, whether to a Quicktime Movie or using Quicktime Conversion, the resulting image has thick black lines on both sides of the screen and in the middle.
I have Quicktime Pro and have already reinstalled FCP to make sure I have all the components. But it's still not working.
Please - any advice would help.
Thanks.Well, have you done the usual things for when FCP doesn't act right?
#44: FCP acting weird - Trash Prefs
Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://www.pistolerapost2.com/fcprescue and run it.
2) Open the Disk Utility and Repair Permissions.
3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane
Maybe you are looking for
-
How do i change the phone number associated with my apple ID?
how do i change the phone number associated with my apple id and attach it to my ipad?
-
Need help for playing .mov file in a swing window......
Am a B.Tech final yr student and my project output is an mov file... i need to play it in a swing jFrame... Can anyone guide me for the above????
-
CRM_ORDER_MAINTAIN, CRM_ORDER_READ
AS I am new to CRM I have simple doubt CRM_ORDER_MAINTAIN, CRM_ORDER_READ are function modules or BAPI's. I know all BAPI 's are REMOTE enabled Function Modules. In which situations we will use RFC and in which situation we will use BAPI's Thanks,
-
How can i get my purchased music that was under another user name
how can i get my purcchased music that I purchased under anorhe user name. I just lost all of my music!
-
Somehow, during my last import of photos from my iPhone, a second library was created. Now I can't open the original one even though it looks like it should open.