Please Help 8808- A23 Audio Driver Win 7 32Bit

Can anyone please help me find an Audio Driver for a
ThinkCentre MT-M 8808- A23 S/N xxxxxxx
Currently running Windows 7 32bit
Cheers
Moderator Note; s/n edited to prevent possible abuse

What does dep compliant mean? Are you talking about Data Execution Prevention? I understand win 7 is still in beta or Release Candidate status. It is due to start shipping in only?a few months so if Creative doesn't get on the ball, OEM's will ship with other vendors hardware. My on board Realtek sound works just fine but I would like to use the "upgraded" card I paid good money for. I am using the latest driver from Creative which is for my configuration. Can you please be more specific with your assistance? To answer your queston, yes, device manager shows that Creative drivers are installed. Thank you for your [email protected]

Similar Messages

Please help Installing new Hard Drive. PLEASE HELP

I know this topic has been posted before and I have read all the reviews but still nothing ..
I m trying to install a new hd. I put the screws where there needed to go, plugged in all appropriate SATA plugs into new HD, went to dicl utility and no new HD shows up to initialize or format. Please help me .. I have purchased a 500 gb Seagate HD from ramjet.
Item:
Seagate 500GB SATA II 7200rpm 16mb
Specifications:
Capacity: 500GB
Performance
Rotational Speed: 7200rpm
Buffer Size: 16mb
Transfer Rate
Serial ATA (G/s): 3.0G/sec
Average Seek: < 8.5ms
Average Latency: 4.16ms
I have installed and uninstalled the new HD about 5 times already. Please help me

On older ATA drives there are little plastic tabs that, depending on configuration, designate a drive as "Master" or "Slave." If both drives are configured as "master" it can sometimes cause one not to be seen by the computer.
I only mentioned it because:
A) I had it happen 2x with my old G4.
B) Most new drives are shipped with the jumpers in "master" position, I'm guessing because they assumed most people were replacing their primary drives, not adding them.
Check out these links for more about jumpers on drives.
http://www.seagate.com/support/kb/disc/ref/jumper_settings.html
http://www.pcmech.com/show/harddrive/43/
Good luck!
-K

PLEASE PLEASE HELP really fast audio track!!

Ok here is what I am doing. I have some audio files that we recorded onto an ipod via an imic. I have the files on a flash drive, and I drug them over to garage band. The into music file we made worked just fine, but the audio lecture is really really really fast, like the chimpmunks, and so fast you can't make it out. If I just double click the file and open it in quick time it sounds just normal. I really really really need to get this going, can someone please help me. I need to take the intro track, add it to the first part of this lecture, and then make a audio cast of the two tracks. Can someone out there PLEASE help me. You can email me at [email protected]
thanks so much!

That won't help, he said he recorded onto his iPod which means it was probably recorded at 11K or 22K. The link I posted will solve his problem.
--HangTime [Will Compute for Food] B-|>

Please help me with Audio Hijack Pro!!!!

Guys, I am really trying to get my podcast back up and running, but I ran into a weird problem with Audio Hijack not too long ago. I have gotten this to work many times before, so this is nothing new. When I use AHP to hijack my microphones, and then use Garageband to record, after 10 min, I get static on one of my mics. Now, I have purchased this product, so it is totally legit, and I know that the trial gives you static after 10 min, but I have my code and the program took it fine. I have contacted AHP, but they basically had me delete a pref file and then reinstall it. It did not work. Can you think of any other ideas that I can try??? I really want to get this back up and running and it takes AHP a long time to get back to me. PLEASE HELP!
Thank you!

I forgot to mention the reason I am using Audio Hijack pro is because i am using 2 usb mics.

Please, help with Live Audio/Video example from jmf solutions

Hello,
I�m desperate looking for a solution for a particular problem.
I�m trying to feed JMF with an AudioInputStream generated via Java Sound, so that I can send it via RTP. The problem is that I don�t know how to properly create a DataSource from an InputStream. I know the example Live Audio/Video Data from the jmf solutions focuses on something similar.
The problem is that I don�t know exactly how it works, os, the question is, how can I modify that example in order to use it and try to create a proper DataSource from the AudioInputStream, and then try to send it via RTP?
I think that I manage to create a DataSource and pass it to the class AVTransmit2 from the jmf examples, and from that DataSource create a processor, which creates successfully, and then find a corresponding format and try to send it, but when i try to send it or play it I get garbage sound, so I�m not really sure whether I create the DataSource correctly or not, as I�ve made some changes on the Live Audio/Video Data from the jmf solutions to construct a livestream from the audioinputstream. Actually, I don�t understand where in the code does it construct the DataSource from the livestream, from an inputStream, because there�s not constructor like this DataSource(InputStream) neither nothing similar.
Please help me as I�m getting very stuck with this, I would really appreciate your help,
thanks for your time, bye.

import javax.media.*;
import javax.media.format.*;
import javax.media.protocol.*;
import java.io.IOException;
import javax.sound.sampled.AudioInputStream;
public class LiveAudioStream implements PushBufferStream, Runnable {
    protected ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW);
    protected int maxDataLength;
    protected int vez = 0;
    protected AudioInputStream data;
    public AudioInputStream audioStream;
    protected byte[] audioBuffer;
    protected javax.media.format.AudioFormat audioFormat;
    protected boolean started;
    protected Thread thread;
    protected float frameRate = 20f;
    protected BufferTransferHandler transferHandler;
    protected Control [] controls = new Control[0];
    public LiveAudioStream(byte[] audioBuf) {
         audioBuffer = audioBuf;
                  audioFormat = new AudioFormat(AudioFormat.ULAW,
                      8000.0,
                      8,
                      1,
                      Format.NOT_SPECIFIED,
                      AudioFormat.SIGNED,
                      8,
                      Format.NOT_SPECIFIED,
                      Format.byteArray);
                  maxDataLength = 40764;
                  thread = new Thread(this);
     * SourceStream
    public ContentDescriptor getContentDescriptor() {
     return cd;
    public long getContentLength() {
     return LENGTH_UNKNOWN;
    public boolean endOfStream() {
     return false;
     * PushBufferStream
    int seqNo = 0;
    double freq = 2.0;
    public Format getFormat() {
         return audioFormat;
    public void read(Buffer buffer) throws IOException {
     synchronized (this) {
         Object outdata = buffer.getData();
         if (outdata == null || !(outdata.getClass() == Format.byteArray) ||
          ((byte[])outdata).length < maxDataLength) {
          outdata = new byte[maxDataLength];
          buffer.setData(audioBuffer);
          buffer.setFormat( audioFormat );
          buffer.setTimeStamp( 1000000000 / 8 );
         buffer.setSequenceNumber( seqNo );
         buffer.setLength(maxDataLength);
         buffer.setFlags(0);
         buffer.setHeader( null );
         seqNo++;
    public void setTransferHandler(BufferTransferHandler transferHandler) {
     synchronized (this) {
         this.transferHandler = transferHandler;
         notifyAll();
    void start(boolean started) {
     synchronized ( this ) {
         this.started = started;
         if (started && !thread.isAlive()) {
          thread = new Thread(this);
          thread.start();
         notifyAll();
     * Runnable
    public void run() {
     while (started) {
         synchronized (this) {
          while (transferHandler == null && started) {
              try {
               wait(1000);
              } catch (InterruptedException ie) {
          } // while
         if (started && transferHandler != null) {
          transferHandler.transferData(this);
          try {
              Thread.currentThread().sleep( 10 );
          } catch (InterruptedException ise) {
     } // while (started)
    } // run
    // Controls
    public Object [] getControls() {
     return controls;
    public Object getControl(String controlType) {
       try {
          Class cls = Class.forName(controlType);
          Object cs[] = getControls();
          for (int i = 0; i < cs.length; i++) {
             if (cls.isInstance(cs))
return cs[i];
return null;
} catch (Exception e) {   // no such controlType or such control
return null;
and the other one, the DataSource,
import javax.media.Time;
import javax.media.protocol.*;
import java.io.IOException;
import java.io.InputStream;
import javax.sound.sampled.AudioInputStream;
public class CustomDataSource extends PushBufferDataSource {
    protected Object [] controls = new Object[0];
    protected boolean started = false;
    protected String contentType = "raw";
    protected boolean connected = false;
    protected Time duration = DURATION_UNKNOWN;
    protected LiveAudioStream [] streams = null;
    protected LiveAudioStream stream = null;
    public CustomDataSource(LiveAudioStream ls) {
         streams = new LiveAudioStream[1];
         stream = streams[0]= ls;
    public String getContentType() {
     if (!connected){
            System.err.println("Error: DataSource not connected");
            return null;
     return contentType;
    public byte[] getData() {
         return stream.audioBuffer;
    public void connect() throws IOException {
      if (connected)
            return;
      connected = true;
    public void disconnect() {
     try {
            if (started)
                stop();
        } catch (IOException e) {}
     connected = false;
    public void start() throws IOException {
     // we need to throw error if connect() has not been called
        if (!connected)
            throw new java.lang.Error("DataSource must be connected before it can be started");
        if (started)
            return;
     started = true;
     stream.start(true);
    public void stop() throws IOException {
     if ((!connected) || (!started))
         return;
     started = false;
     stream.start(false);
    public Object [] getControls() {
     return controls;
    public Object getControl(String controlType) {
       try {
          Class cls = Class.forName(controlType);
          Object cs[] = getControls();
          for (int i = 0; i < cs.length; i++) {
             if (cls.isInstance(cs))
return cs[i];
return null;
} catch (Exception e) {   // no such controlType or such control
return null;
public Time getDuration() {
     return duration;
public PushBufferStream [] getStreams() {
     return streams;
hope this helps

Please help! 1TB SSHD drive in my optical bay keeps ejecting itself.

I recently purchased a 13in macbook (non-retina, build 13e28), 500gb HD with the optical drive running the latest version of Mavericks 10.9.4. I decided to install a Samsung SSD (120gb) along with a 1TB Seagate SSHD (a hybrid SSD). My intention is to use the SSD for startup and for all my apps and to use the SSHD for storage of my music. I have all my music from my 2008 macbook in an external disk and while I was transferring all my files (music, movies, pictures, documents, & downloads) the SSHD ejected on its own and I was prompted with a small window that said "Disk Not Ejected Properly - Eject "SSHD" before disconnecting or turning it off".
I've rebooted several times and even re-installed the OS on my SSD to see if that would fix anything. I also verified/repaired disk/permissions on the SSHD and it still keeps ejecting the disk within 2 minutes of re-booting.
Can someone please help me resolve this? Thank you!

Check the specs for storage of your macbook. It probably can only handle up to 750 GB.

Please HELP. Got audio, no video

Please help! Anyone!
Using aftermarket Windows XP, Explorer 6.0 - SP 2. Downloaded
Flashplayer from Adobe site. When clicking on a video link, get
black window in left column that says "Loading." Once apparently
completed, I get about one frame of video (an ironic "flash" if you
will) and then window goes away, everything on page column moves up
into space where the window was and I get to hear the accompanying
audio while staring disconsolately at a survey asking if I enjoyed
the video.
I have downloaded the Adobe Uninstaller and put it on my
desktop. Ran it time and again. Reinstalled Flash. Went to Youtube.
Nothin. Ran the uninstaller again. And again. And again in case I
had several Flashes on my machine. Then I Restarted the machine.
Logged back on and reloaded Flash. Went to Youtube. Nothin. Nothing
but sound, anyway.
I'm quite sure I'm the only one in the world with this
problem! Lotta trouble for an amusement.
Since Adobe doesn't, does anybody wanna help an ignorant old
man?

See Here for > Frozen or unresponsive iPhone
Try this First... No Data will be Lost...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
More Info here > https://discussions.apple.com/message/19521062

Please, Help (nvidia 410m xp driver)

for more than 7 hours i tried to find driver for my notebook lenovo b570.
i run xp 32 bit, and that really imortatnt for me.
i tried so many drivers to install and search by ID and trying to edit .inf files - nothing can help
im in despair, please help

hey ninjaka,
i believe that this is the page which you require :
http://consumersupport.lenovo.com/sg/en/DriversDownLoads/APR_Driver_List.aspx?CategoryID=91249,13224...
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Please help with canon scaner driver

i'm trying to install my scaner but the drver seems to nor work (not universal)... so i try to downloand a newer version from canon. but the downloads for mac are .bin format ... at the end a have just a with page that any app. recognize.
please help if anyone has a tip, i need to downloand ScanGear and CanoScan Toolbox.
thanks to all,
Henry

i'm trying to install my scaner but the drver seems to nor work (not universal)... so i try to downloand a newer version from canon. but the downloads for mac are .bin format ... at the end a have just a with page that any app. recognize.
please help if anyone has a tip, i need to downloand ScanGear and CanoScan Toolbox.
thanks to all,
Henry

Please help with m-audio mobile pre driver not connecting with garageband08

hey i just updated my powerbook G4 with leopard and lost my m-audio (mobile pre) driver in system preferences so i downloaded it b/c i don't have my original disc, the downloaded version shows in my system preferences now but won't appear in the garageband preferences audio/midi input, my only choices are built in mono/sterio. any ideas? besides finding the disc? i'd really appreciate any help as my band is trying to record a cd.

Yeah, the Mobile Pre is not going to work on Leopard until M-Audio updates their drivers, unfortunately.
There is one workaround that I've gotten to work, but it probably won't work for most folks. If you have two partitions on your system, one with Leopard and one with Tiger, you can get the mobile pre to work in Leopard. It's a bit odd, but it does work.
First, boot into you Tiger partition that has the Mobile Pre drivers installed and verify that the system sees and can use the Mobile Pre.
Now, boot into Leopard. Your Leopard system should now see the Mobile Pre and you should be able to use it until you have to reboot the Leopard system.
If you have an external HD with Tiger installed, you might also be able to get this to work w/out having to repartition your system. Just install Tiger on the external HD, boot from it, then install the Mobile Pre drivers.
Hope this helps and possibly provides some temporary relief until M-Audio updates their drivers....

Please help with Horrible noises on Win 7 64bit install?

? I have an X-fi xtrememusic card that came from Dell preinstalled. The card works fine in 32 bit OSes and in 64bit linux but I'm disappointed yet again with this latest driver update that fixes nothing for me. I have terrible noises coming from the channels that do work. It's a 5. channel system. Any help and guidance would be appreciated. I had tried researching and fixing this before but put it on the back burner hoping an updated driver would eventually fix it. Win 7 RC has been out quite a while now and still no fix from Creative so here I am begging for help in a forum. Thanks in advance to anyone willing to help. I have an nvidia video card that is sli ready but I don't have a 2nd card installed, not sure if that info matters.
Danny
Message Edited by dledwith on 06-30-2009 05:2 [email protected]

What does dep compliant mean? Are you talking about Data Execution Prevention? I understand win 7 is still in beta or Release Candidate status. It is due to start shipping in only?a few months so if Creative doesn't get on the ball, OEM's will ship with other vendors hardware. My on board Realtek sound works just fine but I would like to use the "upgraded" card I paid good money for. I am using the latest driver from Creative which is for my configuration. Can you please be more specific with your assistance? To answer your queston, yes, device manager shows that Creative drivers are installed. Thank you for your [email protected]

Please help, running oracle 8i on win 2k system

Hello,
I have been trying all day to get oracle working on my system. I am not networked as I am using it only on my win 2k system. everything installed fine, but some of the programs arent even working...i dont understand why it installed successfully if programs arent starting up. (net8 easy config, etc)
also, i am trying to start up SQL Plus and it is asking me for a user/pass/host string. i tried scott/tiger and nothing happened i get an error ORA12560: INS:protocol adapter error
I have used SQL Plus on an installed system before, but this is the first time i am starting everything from scratch.
Any help would be appreciated. Thank you.

check it please whether it is a database version or just you are installing a client. Install Enterprize database on 2k system. I you are running a client software then you are to deinstall it.

Please help - vault on networked drive !?

I am trying to create a Vault on an external networked drive. The drive is an ethernet Maxtor unit which I have plugged into my LAN via a router. I can access the drive in Finder - and can import from, save to etc. in all applications (including Aperture).
I can mount and navigate to it in the Add Vault dialog, However, when I click "Add" I get the message:
"Aperture does not support networked vaults. Please select a directly attached storage device (such an an internal, USB or FireWire - connected hard drive."
I thought this was being fixed. It seems ludicrous not to be able to vault to a networked drive. Help !!!
Paul

I had (or rather has the same problem). I also have a Maxtor Hared Storage Plus and was quite surprised to find that Aperture did not supported a network drive for vaults. I then created a drive on a USB drive I have and then tried to copy the Vault file to the Maxtor. Then the next problem occurred. The Maxtor did not support the Vault file. I think this is because the Maxtor is formatted in FAT 32 and as such it cannot accept files larger then 4 Gb. My Vault file is bigger then that so ….
I now have the following set up:
MBP with a Lacie firewire drive attached to it. On the Lacie I have all my pictures. Then I have another USB drive which I use for the Vault files. The Maxtor is used in the home network for the family to back up their files such as the iTunes library etc.
Aldrin
Macbook Pro Mac OS X (10.4.7) 24 inch Dell

Please help. My audio track is too low after exporting movie made with Premiere Pro to YouTube.

Hello. My crew and I recently completed post-production on an independent film. We used Adobe Premiere Pro 5.0 for video and audio editing. We had a very low budget for production, so we didn't have the best audio equipment to record sound with. So in editing, we had to do quite a bit of sound mixing to minimize background/ambient noise and interferences/distortions caused by large electrical appliances in some indoor scenes, such as taverns and cafes. We managed to clean up the audio, and the audio ultimately sounded great. However, when we exported the film to YouTube, the entire audio track sounded low. To hear the film at an adequate level on YouTube, the volume has to be turned all the way up. I'm wondering what can be done to export the film to YouTube and maintain strong, optimal audio volume/quality. Any help would be greatly appreciated. Thank you and take care.

As Jeff of Safeharbor noted, you really need to check the audio meters in Prpro with your "final" project. I found that I could have a sound level that played fine on my computer, but ... on exporting to a DVD ... was way low and required a very high setting on any other computer or a tv to be able to hear. I hadn't actually looked at the audio meters. On checking them ... yeah, the peak was down about -18, the main content of the talking-heads was below that. After raising it with PrPro's audio tools, the sound was fine.
I'd bet your sound is showing low on the meters ...
neil

Please Help! No Audio on half of my DVD!

Hello. I created a project in iMovie. I didn't do much, just digitized my clips and imported into iDVD. Once in iDVD I created a menu and a slideshow. For the slideshow, I had it "fit to audio" with no transitions. (This is a DVD of a wedding I did) I had the wedding & reception as 1 chapter. The wedding is an hour long and the reception is apprx. 15-20mins long. When the DVD is burned and I play it in my DVD player... there is audio for all execpt the last 5 mins of the wedding. Then when the reception comes on, there is audio for about 1 min, then it goes away. This has happened on 7+ DVD's I have burned, which now have be come coasters. The audio is on the clips from iMovie. Also, on my latest burn, the audio comes in and out a few times on the slideshow. But the majority of the song is still there. Can anyone help. The people I did this for are real anxious to get this. Thank You! ~Mike

Was your camcorder set to record 16-bit audio, not 12-bit? If recorded as 12-bit, change the setting and share back to your camcorder and record as 16-bit this time. Import into a new iMovie HD project.

Please Help 8808- A23 Audio Driver Win 7 32Bit

Similar Messages

Maybe you are looking for