Please help a very important

Please help a very important
There I have a database 8i
An area of 36 GB and night Eugene space on the hard disk is 2 GB
I want to reduce the database space has decided to delete the tables from 2006 to 2010,
But the database space 36 still Kiev and what to do

I wish I could locate the apple document about backups, I know there's an official one but I can't find it. If you have a .mac account you can use the "backup" program to do that. The other way is third party programs that will backup any updated files to a remote computer on your network, or another drive. Probably the easiest though is just burning the files you need to save to DVDs or CDs. Someone else could probably explain this a whole lot better than me though, so give it a try.
Oh! And just out of curiocity, how did the program not work? Did you get an error, or was the folder just too far gone to get back? If the lisence you purchaced is transferable, you might just want to sell it to someone here or on ebay. Good luck.

Similar Messages

  • Please help my very important notes disappeared from my mini ipad

    Please help all my notes on my ipad mini disappeared!
    kathy

    Check under Settings -> General -> Restrictions if you've restricted Safari

  • Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

    please help problem with importing a file error output "there was an error decompressing audio or video"

    this is related to what adobe program/version?

  • HT204022 Dear sir/madam,  I had accidentally deleted all my images from my iPhone 4s do u send me any solution or my phone back up. please sir its very important for me i have just one hope from you.  Thank you  

    I had accidentally deleted all my images from my iPhone 4s do u send me any solution or my phone back up. please sir its very important for me i have just one hope from you.
    Thank you  

    Use the backup you make to iCloud or a computer.
    iTunes: About iOS backups - http://support.apple.com/kb/HT4946

  • I purchase this approx 6 yrs ago, recently had to purchase Mac OS X Snow Leopard for my daughter new IPOD to work.  But this crazy computer is extremely slow, why??? Please help.  Very fustrated!

    I purchase my Mac approx 6 years, recently purchase Mac OS X Snow Leopard disk for my daughters new IPOD to work, computer is extremely slow, others refuse to use it, why is it slow, I know very little about this computer and have hated it from day one! Please help.  The most I have on this computer would be photos, never downloaded movies, and have approx 40 songs.

    The best option to make it faster would be to manually go through and erase all of the junk (files you never use) from the computer. If you want a much faster way (depending on how many files you have, this can take much longer), you can copy the files you'd like to keep to an external HD and then erase and reinstall OS X.
    Erase and Reinstall OS X using the OS X Install DVD
    Note: This will delete all data on the disk. Back up important files before continuing.
    Erasing and then reinstalling OS X can give you a fresh start, making your computer exactly as it was whenever you received it from Apple. This can solve various problems such as corrupt system files.
    Insert your OS X Install DVD into the computer's built-in disc drive (if applicable) or your computer's external USB disc drive.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    Press the Power Button to turn on the computer.
    Press and hold the D key on the keyboard until the Recovery partition loads. If this does not work, shut down the computer, press the Power Button to turn on the computer, and then hold in the Alt (⌥) button immediately after you press the power button. Then, select the Mac OS X Install DVD to boot from the Mac OS X Install DVD.
    Select Disk Utility and then choose Continue.
    Select your startup disk (Macintosh HD by default) from the left.
    Select the Erase tab.
    Choose the Format pop-up menu and choose Mac OS Extended (Journaled), enter a name for your disk, and then click Erase.
    After the disk is erased, choose Disk Utility > Quit Disk Utility.
    Select Reinstall OS X and then choose Continue.
    Follow the instructions.
    I hope I helped.

  • How to check for null values in bpel?? Please Help! very urgent!!!

    Hello Guys,
    I have a problem. I have an external webservice to which I have to post my request. My task is to create an Webservice and Service Assembly to which others would post request and get response. I have to create SA to deploy onto the bus.
    The problem is that there are optional elements in the request and response xsd's. In the Response sometimes certain feilds may come or they may not. for Example:- my response could contain a tag like this <firstName></firstName>
    I have to copy these feilds in my bpel process from one variable to another.(like in the mapper).
    My Question is , Is there any way in BPEL process or BPEL mapper where I could Check for null values in the request or response???
    Your inputs would be very helpful.
    Thanks
    Rajesh

    Thanks for replying man :)
    Ok I will be more clear.
    Here is a snippet of one of the xsd's that I am using.
    <xs:element name="returnUrl" nillable="false" minOccurs="0">
                        <xs:annotation>
                             <xs:documentation>Partner specifies the return URL to which responses need to be sent to, in case of
    Async message model.
    </xs:documentation>
                        </xs:annotation>
                        <xs:simpleType>
                             <xs:restriction base="xs:anyURI">
                                  <xs:maxLength value="300"/>
                                  <xs:whiteSpace value="collapse"/>
                             </xs:restriction>
                        </xs:simpleType>
                   </xs:element>
    This means that the return URL field can be there or it may not be there. But if it is there it cant be null because nillable=false. But the whole <returnURL> </returnURL> can be there or it may not be there because minOccurs=0.
    My requirement is , if returnURL is there in the response with a value, then in my BPEL mapper I should map it else I should not map it.
    Thats the issue.
    and Yes kiran, the node be non-existant.
    So can you please help me with this.
    Thanks
    Rajesh

  • Please help, need to import .swf/flash media

    Hi all, have a little issue here. I have some SWF flash media and I want to bring it into imovie so I can edit it more effectivley then with qt. However, I have been haveing alot of trouble, most time I only get the audio part of it and no image. Most of the media is widescreen, I was able to export the media in qt to dv stream and then import it, however, it lost its widescreen look and was kinda squished from the sides if that makes sense, if anybody has expeirence with this type of media, please help.
    Nathan

    Hi Nathan,
    I've never "dared" to convert .swf, but I read a lot about problems doing so... probably the Quicktime section of this forum is better to ask...
    maybe a much easier workaround is using tools as SnapzPro from Ambrosia; this tool claims to "record" any screen content (and audio) and convert it directly into any wanted format (as dv)...
    just a thought.......

  • Mac booting problem - Please help! very, very desperate!

    My mac was being very, very slow so I turned it off, then as it it was booting it was taking ages so i restared in safe mode. While booting in safe mode the black bar at the bottom goes around 2/5 of the way across and then my macbook just switches off.
    Ive tried:
    fsck
    disk utility repair/verify
    reinstalling OS X Lion
    When i tried to repair, it said i needed to erase everything and reinstall the OS. Last night when i tried to it said both drives are locked so i couldnt. And now when i just tried again, neither drivers are appearing; the box is just blank.
    Let alone my livelyhood on the laptop, i have thousands and thousands pictures which if lost, would genuinley heartbreak me. I have much valuable data on my laptop and i really dont want to erase all data, because me being the gigantic fool that i am, i only have one time machine back up from about a year and a half ago.
    Please, please help.
    Thank you!

    humzasadique,
    unfortunately you’ve now discovered where the value proposition lies in making regular backups — if your livelihood depends upon your laptop, that lack of due diligence is rather baffling.
    Which model MacBook Pro do you have, and which version of OS X is installed on it? Do you have an external bootable drive?

  • PLEASE HELP! Trouble importing media used in Premiere CS6 into CC

    After infinitely trouble with stability in OSX Premiere CS6, I´ve tried to open my project in CC. I get a dialogue box when importing media with heading "Cannot Link Media" and saying "The selcted file cannot be linked because it has 2 audio channel(s) and the clip was created with 1 audio channel(s). Now, these clips had no issues in CS6, but after installing CC, I cannot open anything in CS6 and CC won´t, as stated, accept my clips. Now, I tried to uninstall CS6 to late reinstall it. But Adobe seems to have removed the installer, anyway I can´t find it. SERIOUSLY!. This is EXTREMELY frustrating. PLEASE HELP!

    I don't have any sure-fire solutions, but I do have a suggestion: rather than opening the whole CS6 project and going through the whole conversion process, try importing just the sequence(s) from the CS6 project into a new CC project. There are a couple of ways to do so: 1) File>Import, select "Import Selected Sequences," then pick the desired ones, or 2) drill down to the project in Media Browser, which will show you it's contents, then drag and drop the sequence(s) into the Project panel.
    I found a few bug reports in the same neighborhood. They were all fixed in the release you're using. But each was specific to a particular file type, so you may have hit on a case that we didn't exercise. It could really help us nail this down if you provided one small clip that CC is balking at and, ideally, a CS6 project containing that clip.

  • Please help with video importing

    I just got my iBook G4 so that I could make an iMovie for an event that we are having in a few weeks.
    I own a Sony DCR trv330 Digital8 Handycam. I have tried everything that I have read to try to get iMovie to import my video and it still say that there is no camera attached.
    Is this camera even compatable? Please help quickly.
    iBook G4   Mac OS X (10.4.5)  

    Are there any other devices connected to the Firewire port? Sometimes this can cause a conflict.
    According to the manual for the Sony TRV340, you need to go into the menu system and set the AV/DV to "On".
    After that, try a different cable. After that, have you used any device on the Firewire port? It is rare but the port may be fried.
    Mike

  • I can't sync as my ipod isn't showing up in itunes. Can you please help? Very frustrated!!! Thank you:)

    Can someone please help??? I have set up a new account and I can't sync as my ipod isn't showing in itunes.
    Please help, I'm very frustrated.
    Thank you:)

    If using a Mac - iPod not recognized in iTunes and Mac desktop
    If using a PC - iPod not recognized in 'My Computer' and in iTunes for Windows

  • Please Help!  Photo Import has Suddenly Slowed to a Crawl -- 19 hours

    I have transferred 1,000s of RAW photo files to my HD and external HD with no problem, until a few days ago. Suddenly, what used to take about 3 hours now takes 19-24 hours. I can't figure it out.
    I've changed card readers, I've tried different memory cards, I've even downloaded to external HDs and tried to upload directly to my HD. I've also hooked up my camera and tried to transfer the files via a USB cable (traditionally the slowest way). I've also tried to upload using different software programs: Lightroom, iPhoto and Bridge.
    I've also ran the Disk Utility on my HD and there weren't any problems.
    Nothing works.
    Please help.

    If ran Disk Utility and only used +Repair Disk Permissions+, you may want to startup from another disk and run +Repair Disk+ (to look for and repair disk directory errors). If you don't have another bootable disk, you can startup from the Mac OS X (current version) installation disk. Insert disk and startup with the C key held down to start from the optical drive. When you get to the first Installer screen (after language selection), go up to the Utilities menu and select Disk Utility, then run +Repair Disk+ on your normal startup drive.
    Also, do you have sufficient free space on your hard drive? While you were move those 1000s of photo file around, did your startup drive ever get to less than 10GB free?

  • I cant remmber the restrictions passcode please help me for important

    i cant remmber the restrictions passcode please help me for important

    If you cannot remember the restrictions passcode, the only alternative is to restore the phone as a new device. Trying to restore from backup will only put the passcode back on. There is no other alternative. See the user manual. http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Please help. AVI import question.

    Hey everyone, thanks for the help. This has been annoying me for quite some time, and I have tried everything and it still doesn't work. I am using Adobe Premiere Version 7.0, just to let you know. Alright, here we go.
    This version of Adobe Premiere Pro doesn't let you capture footage with a USB cable (which they did before, why they got rid of it who knows). I have a firewire port, but it broke a long time ago. Anyway, I can only capture with USB. I use Windows Movie Maker to capture in AVI format. I figure I can capture in WMM and import the AVI files to Adobe Premiere.
    When I import the Windows-Movie-Maker-captured AVI files into Premiere, it plays perfectly about 25 percent of the clip before the rest of the clip locks on a still frame and the audio of that frame. I have a 19 minute, 48 second clip, and it only gets to 4:59 before it locks on a still frame for the next 15 mins. Does anyone know why it imports but only renders or conforms the first 25%? I could import wmvs but the quality is so low I'd rather not.
    Please, someone help me.
    Thanks for your time,
    Casey 

    Casey,
    Welcome to the forum.
    I would use Harm's suggestion to convert the Type I to Type II, and the issues should be solved. Normally, Type I's will function OK, with the occasional OOS (Out Of Sync), but it is static (in most cases), and can be easily adjusted for. Still, the conversion is quick and painless. I use DigitalMedia Converter 2.7 (shareware), but there are many free conversion programs, like Prism, that get good reviews.
    Do not use any flavor of WMV, as these will cause many issues, with the loss of quality being only one.
    Also, unless you have a laptop, a FireWire card would be a very cheap addition, and get you to where you could Capture directly from your miniDV tape camera. I would go with one that has a controller chip for each connection. I've seen these in the US$10 - 20 range for single chip units, and around US$ 30 for multi-chip cards.
    Good luck,
    Hunt

  • Please help: Need an import 'action'

    Hi,
    I'm trying to make life 'easy' in our household for getting pictures into Aperture 3, but I'm at a complete loss as to how to achieve this - it seems Apple offer great flexibility on export, but little on import.
    What I want to do, is when importing from a CF card (in Canon format), put the images in:
    Project (Year)
    Folder (Month)
    Album (Day)
    I have previously exported to this folder structure, and the 'Projects and Folders' import then created the above - however, there's no way to automatically import into this structure from the CF reader.
    Is there a way to do this with an Applescript 'action' on import ? I don't mind getting my hands dirty with tweaking some code, but I've never really used Applescript at all.
    Because my wife needs to be able to use this, I don't want to have to manuall create any projects/folders/albums or worry about any other details - just have the import defaults setup such that a card is inserted, import all is chosen, and the structure is used.
    I don't want to have a two-stage process unless it's very easy to reproduce. This has to be easy, otherwise I may as well just go back to iPhoto and lose all the great benefits of Aperture.
    I was really looking forward to using the import presets as they solve the other main Aperture problem I had, but this is proving to be a bigger issue now.
    Thanks for any help.
    Michael.

    Hi Calx,
    I really do understand projects. I just don't need them. I'm not wanting to organise things at the moment - just get the images 'into' Aperture, and create smart folders.
    I don't actually need a project for this. I could use just one project, as Aperture requires it, but then I'm stuck after 10000 images.
    As mentioned in my original post, I was planning on 'sturcturing' by year/month/date as that is a valid structure for me - the problem being which part of that structure is a project (year is more than 10000 images, so it would have to be month) ad how I automatically create that on image import.
    I realise everyone seems to want to organise things differently, and most people create a 'project' for an 'event' or 'location' or 'shoot' or suchlike... I don't need that. I take pictures and put them in 1 big pot, and use smart folders etc., later on.
    The problem seems to be that I need to actually manage it with projects from the start - I can't just bring in images into Aperture (as the container) and use 'smart' tools to group things together - I have to have a project.
    Everyone's answer is about how to structure projects based upon different criteria. I realise this is how Apple expect it to work. I just don't have the time to group things into projects at the moment.
    Either way, this is all away from the original point. The main problem I have is not being able to automatically create a structure (of any kind other than a single or constrained auto-split group of projects) when importing directly from a CF card or camera.
    What I want, is to be able to say:
    On import, split the files by date, and put them in a project / folder / album according to year / month / date respectively. I can't do that, and it seems I have to rely on external functionality, import / export into a structure & re-import, or manually move select move images.
    I know you can assign an Applescript action on the import, and I figured that perhaps this could be used to re-structure the images on the import, but by the silence on this point and the fact that everyone keeps pushing me to manually maintain my projects, suggests it just can't be done.
    Michael.

Maybe you are looking for