Please help......ABAP Runtime Errors DYNPRO_FIELD_CONVERSION
Hi everyone,
I don't know what's wrong with my code. It says the error in the subject line and it only applies to selected records.
A conversion error occurred.
What happened?
The current screen processing was terminated, since a situation
occurred from which it could not continue processing.
This is probably due to an error in the current screen of the ABAP
program.
What can you do?
Please make a note of the actions and input which caused the error.
Please make a note of the actions and input which caused the error.
To resolve the problem, contact your
SAP system administrator.
Choose "Print" for a hard coopy of the termination message. You can
display and adminster short dump messages using Transaction ST22.
Error analysis
The program flow was interrupted and could not be resumed.
Program "ZADC_PGSPOSTING" tried to display fields on screen 1000. However, an
error occurred while this data was being converted.
How to correct the error
A conversion error occurred while the program was trying to
display data on the screen.
The ABAP output field and the screen field may not have the
same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. Attemting to display
Screen name.............. "ZADC_PGSPOSTING"
Screen number............ 1000
Screen field............. "JTAB-GSAMT"
Error text............... "FX020: Data lost."
Further data:
I don't know why it prompts this error, when in fact I usually pass the "JTAB-GSAMT" field to a variable. Please help me with my problem. I'm having a hard time deciphering it when in fact my program is easy to understand. I must have overlooked something. Thanks so much in advance.
Regards,
Anna
PROCESS BEFORE OUTPUT.
MODULE STATUS_1000.
MODULE get_name.
MODULE get_psgs.
LOOP AT JTAB WITH CONTROL CTRLPSGS CURSOR CTRLPSGS-TOP_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT JTAB.
MODULE SET_LINE_COUNT.
ENDLOOP.
MODULE EXIT01 AT EXIT-COMMAND.
MODULE USER_COMMAND_1000.
*& Module GET_NAME OUTPUT
text
MODULE GET_NAME OUTPUT.
siptot = 0.
data: kostl like pa0001-kostl, H_EMPNO(8) TYPE C.
IF zemp ne itab-pernr.
move: itab-pernr to zemp.
move: zemp to itab-pernr.
ELSEIF zemp EQ itab-pernr.
move: itab-pernr to zemp.
clear: itab.
refresh: jtab.
move: zemp to itab-pernr.
ENDIF.
clear: kostl.
SELECT SINGLE * FROM pa0002 WHERE pernr = itab-pernr
AND endda = '99991231'.
IF sy-subrc = 0.
CONCATENATE: pa0002-nachn ',' INTO itab-name.
CONCATENATE: itab-name pa0002-vorna INTO itab-name
SEPARATED BY SPACE.
ENDIF.
SELECT kostl into kostl FROM pa0001 WHERE pernr = itab-pernr
AND endda = '99991231'.
ENDSELECT.
SELECT ltext into itab-ltext FROM cskt WHERE kostl = kostl
AND datbi = '99991231' and spras eq 'EN'.
ENDSELECT.
WRITE ITAB-PERNR TO EMPNO.
shift empno left deleting leading '0'.
SELECT SINGLE * FROM zamc_mstr WHERE pernr = itab-pernr.
IF sy-subrc = 0.
SELECT sum( diff_sip ) INTO itab-siptot FROM zamc_deduction
WHERE amc_no = zamc_mstr-amc_no.
siptot = itab-siptot.
ENDIF.
IF zemp <> '00000000'.
APPEND itab.
ENDIF.
CLEAR itab.
ENDMODULE. " GET_NAME OUTPUT
*& Module GET_PSGS OUTPUT
text
MODULE GET_PSGS OUTPUT.
pstot = 0.
gstot = 0.
ectot = 0.
diff = 0.
REFRESH jtab.
SELECT * FROM zppsgsec WHERE pernr = zemp.
MOVE-CORRESPONDING zppsgsec TO jtab.
COLLECT jtab.
ENDSELECT.
CLEAR jtab.
SORT jtab BY datum.
LOOP AT jtab.
pstot = pstot + jtab-psamt.
gstot = gstot + jtab-gsamt.
ectot = ectot + jtab-ecamt.
AT LAST.
diff = gstot - siptot.
ENDAT.
ENDLOOP.
By the way, I'm using table viewer to display my results. Thanks.
Regards,
Anna
Similar Messages
-
MIR4 transaction is giving ABAP Runtime Error
Hi Experts,
When I am trying to display the invoice in MIR4 and/or MIRO the system is generating ABAP runtime error. DYNPRO_FIELD_CONVERSION. This is in Version ECC 6.0.
Short text
Conversion error
What happened?
The current screen processing action was terminated since a situation
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the curren
screen.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manag
termination messages, in particular for long term reference.
Error analysis
The program has been interrupted and cannot resume.
Program "SAPLMR1M" attempted to display fields on screen 6310.
An error occurred during the conversion of this data.
How to correct the error
There was a conversion error in the output of fields to the screen.
The formats of the ABAP output field and the screen field may not match.
Some field types require more space on the screen than in the ABAP
program. For example, a date output field on the screen requires two
more characters than the corresponding field in the ABAP program. When
the date is displayed on the screen, an error occurs resulting in this
error message.
Screen name.............. "SAPLMR1M"
Screen number............ 6310
Screen field............. "DRSEG-REMNG"
Error text............... "FX015: Sign lost."
Other data:
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Please help us to solve this issue.
Thanks and Regards,
Havina
Edited by: Havina Kutty on May 19, 2009 11:54 AMHello,
Please refer
Note 503934 - MIRO: Dump DYNPRO_FIELD_CONVERSION -> field 'REMNG'
Note 445853 - MIR4:more credit memos than invoices for service
Note 393189 - MIRO: Incorrect update of BPMNG -> DYNPRO_FIELD_CONVERSION
Regards,
Ravi -
ABAP runtime error while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N
Dear All Expert,
I am facing problem while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N,
Please find the below ABAP Runtime Error.
Runtime Errors LOAD_TYPE_VERSION_MISMATCH
Date and Time 10.02.2011 11:13:07
Short text
Change of a Dictionary structure at runtime of a program.
What happened?
Runtime error
The current ABAP program "CL_IM_WRF_MM_PROC_PO==========CP" had to be
terminated because one
of the statements could not be executed at runtime.
What can you do?
Restart the program.
If the error persists, contact your SAP administrator.
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY"
changed
during the flow of the transaction.
As the type was already used in the old version
and in the new type should be used in the same transaction in the new
version, the transaction had to be cancelled to avoid inconsistencies.
How to correct the error
Try to restart the program.
System environment
SAP-Release 700
Application server... "iqe"
Network address...... "172.25.0.85"
Operating system..... "Linux"
Release.............. "2.6.9-55.ELsmp"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "iqe"
Database type..... "ORACLE"
Database name..... "IQE"
Database user ID.. "SAPSR3"
Terminal................. "MUMJML5727"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Dec 26 2010 20:17:07"
create on........ "Linux GNU SLES-9 x86_64 cc3.3.3"
Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 285
Patch text.. " "
Database............. "ORACLE 10.1.0.., ORACLE 10.2.0.., ORACLE 11.2...*"
SAP database version. 700
Operating system..... "Linux 2.6"
Memory consumption
Roll.... 16192
EM...... 25139088
Heap.... 0
Page.... 40960
MM Used. 8038136
MM Free. 4528408
User and Transaction
Client.............. 600
User................ "JKMM"
Language key........ "E"
Transaction......... " "
Transactions ID..... "4D524AD1FD7A42F9E1000000AC190055"
Program............. "CL_IM_WRF_MM_PROC_PO==========CP"
Screen.............. " "
Screen line......... " "
Information on where terminated
The termination occurred during generation of the ABAP/4 program
"CL_IM_WRF_MM_PROC_PO==========CP".
The termination occurred in line 213
of the source code of program "CL_IM_WRF_MM_PROC_PO==========CM007" (when
calling the editor 2130).
Source Code Extract
Line SourceCde
183 DATA: l_flag TYPE wrf_pbas_boolean.
184
185 CALL FUNCTION 'WRF_POHF_MSG_READ_PREVIEW_FLAG'
186 IMPORTING
187 e_preview_flag = l_flag.
188
189 IF NOT l_flag IS INITIAL.
190
191 DATA: l_header TYPE REF TO cl_po_header_handle_mm.
192
193 MOVE im_header ?TO l_header.
194
195 CALL METHOD l_header->if_output_mm~preview( ).
196
197 CALL FUNCTION 'WRF_POHF_MSG_RESET_PREV_FLAG'.
198
199 ***$ Widening Cast for printing information.
200 ** CALL FUNCTION 'WRF_POHF_STORE_PRINT_INFO_SET'
201 ** EXPORTING
202 ** im_header = l_header.
203
204 * Printing Preview
205 * IF NOT gv_preview IS INITIAL.
206 * CALL METHOD l_header->if_output_mm~overview( ).
207 * CALL METHOD l_header->if_output_mm~preview( ).
208 * clear gv_preview.
209 ENDIF.
210
211 * ENDIF.
212
>>>>> ENDMETHOD.
Internal notes
The termination was triggered in function "ab_RxDdicStruShareFailed"
of the SAP kernel, in line 2539 of the module
"//bas/700_REL/src/krn/runt/abtypload.c#11".
The internal operation just processed is " ".
Internal mode was started at 20110210111306.
Name of the changed type......: "WRF_POHF_KOMP_STY"
New version of the type.......: 20070508193207
Old version of the type.......: 20070508193207
New user......................: "Type" "WRF_POHF_KOMP_STY"
Version of the new user.......: 20070508193207
Old user......................: "???" "???"
Version of the old user.......: "???"
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
(CTrcStack2+0x78)[0x6cbb78]
(CTrcStack+0xb)[0x6cc17b]
(ab_rabax+0x3be5)[0xb8d985]
(_Z24ab_RxDdicStruShareFailedPKtm4RUDIS0_S1_S0_+0x163)[0xb16823]
(_Z19ab_GetDdicTypeIndexPKtm4RUDI+0x1f6)[0xb0dbb6]
(_Z11ab_LoadViewPtjPKtPK11PROGRAMHEADPj+0x27e)[0xb16ede]
(_Z18ab_GetDdicTypeLoad4RUDI+0x6e)[0xb1705e]
(ab_GetView+0xc1d)[0xb0ee1d]
(_Z20CompressInitRcByDatajPK6CG_DIRjjS1_jj4RUDIPKhj+0x60d)[0xe32b2d]
(_Z21cg_CompressStackFrameP4TRIGjj+0x169)[0xe33399]
(_Z8cg_blkleP3ENV+0x75f)[0xe4779f]
(_Z9sc_cblklePKt8ENV_KINDP7SC_INFO+0x394)[0xe90024]
(sc_blkle+0xdd)[0xec6e4d]
(rs_oper_abap1729+0x37)[0x10eb237]
(rs_expan_abap+0xa1996)[0xfd7a2a]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_inclu+0x5fa)[0xe0d50a]
(rs_oper_abap2160+0x3a)[0x1115d6a]
(rs_expan_abap+0xcd41d)[0x10034b1]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_checkStart+0x41)[0xe1ac51]
(cg_generate+0xb65)[0xe57755]
(ab_gabap+0x14a)[0xb01a5a]
(dy_gen_abap+0x63c)[0x74428c]
(ab_genprog+0x13d3)[0xb03d13]
(_Z17ab_LoadProgOrTrfoPKtjPj+0xb56)[0x8f9ab6]
(_Z11ab_LoadProgPKtj+0x11)[0x8f9ca1]
(_Z15LoadGlobalClassPKtjjj9ClasState+0x24c)[0x958c2c]
(_Z11FillCfixIntPK4CREFP4CFIXjj9ClasState+0x214)[0x957404]
(_Z11ab_FillCfixtj+0x65)[0x957ae5]
(_Z26ab_CrefToCladId_ActivateOKtPh+0x7d)[0x957b6d]
(_Z8ab_jaboov+0x623)[0x959793]
(_Z8ab_extriv+0x607)[0x8ba9c7]
(_Z9ab_xeventPKt+0x1c1)[0xa1c021]
(_Z8ab_triggv+0x9c)[0xa1c77c]
(ab_run+0x97)[0xbde5c7]
(N_ab_run+0x9)[0x736359]
(dynpmcal+0x669)[0x7333b9]
(dynppai0+0x8eb)[0x734d9b]
(dynprctl+0x3e9)[0x733db9]
(dynpen00+0x4a5)[0x726eb5]
(Thdynpen00+0x359)[0x541bd9]
(TskhLoop+0xc49)[0x54d999]
(ThStart+0x20f)[0x55b29f]
(DpMain+0x2da)[0x4bd49a]
(nlsui_main+0x9)[0x4910c9]
(main+0x33)[0x491103]
/lib64/tls/libc.so.6(__libc_start_main+0xdb)[0x3cde51c3fb]
Please help me to resolve the issue.
Thanks & Regards
SKKread this part again: The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY" changed during the flow of the transaction. As the type was already used in the old version and in the new type should be used in the same transaction in the new version, the transaction had to be cancelled to avoid inconsistencies. How to correct the error Try to restart the program
how often had you restarted ME21N before you posted this message?
In best case this message appears only once, because the program / or dictionary was changed while you executed ME21N
If many times, then contact your ABAPer, because then he probably did not transport all objects that were changed, or the objects have to be regenerated in your system. -
Reg : Daily i got 120 ABAP Runtime Error with in 40 Mins(Early Morning)
Dear Friends,
I got following errors regularly. when i run t.code RSBTCDEL and RSSNAPDL. what can i do? then Regularly morning i got same morethan 120 Error. User is SAPSYS 000 Client. How can avoid this type of ABAP Runtime Error.
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Date and Time 10.06.2009 15:04:23
Short text
SQL error in the database when accessing a table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "[601] Could not continue scan with NOLOCK due to
data movement."
Internal call code.........: "[RSQL/FTCH/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPLBTCH" or "LBTCHF19"
"EXECUTE_BP_JOB_SELECT"
If you cannot solve the problem yourself and want to send an error notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System u2192 List u2192 Save u2192 Local File u2192 (Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21. Restrict the time interval to 10 minutes before and five minutes after the short dump. Then choose "System->List->Save->Local File-(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP program: The source code of the program In the editor, choose "Utilities->More Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which actions and input led to the error. The exception must either be prevented, caught within proedure
"EXECUTE_BP_JOB_SELECT" "(FORM)", or its possible occurrence must be declared
in the RAISING clause of the procedure. To prevent the exception, note the following:
Client.............. 400
User................ "BASIS"
Language key........ "E"
Transaction......... "SE38 "
Transactions ID..... "D7A155DEA42EF1EEB52A000423BF7C3A"
Program............. "SAPLBTCH" ( Run a Sap Standard Report RSBTCDEL)
Screen.............. "SAPMSSY0 1000"
Regards
keshavHi Juan,
My System is
ECC 6.0
Database : MS SQL Server 2005
OS - Windows 2003 server
SAP Patches level is Basis - SAPKB70016
ABAP - SAPKA70016
Kernel patch level - 185
when i has update the kernel patches after only i got this error morethan 120 like early morning 4.40 AM to 5.18 AM regularly. what can i do?
Regards
keshav -
ABAP Runtime Error CONVT_NO_NUMBER
Dear all,
I am calling transaction F-02 for posting G/L Account from an FM. I tried with the Header Data and Account and Cost Centre but it says ABAP Runtime Error CONVT_NO_NUMBER. I undersood that its because of the Number interpretation and coded accordingly but still it throws the same error.
Can you please help me in this....
With Regards
JayDear all,
Thanks for giving me some hope. I tried the possiblities but still it says the same error. I have pasted the FM in nutshell. Can you please see that and help me.
FUNCTION ZUPLOAD_XLS.
""Local interface:
*" IMPORTING
*" REFERENCE(P_BUKRS) LIKE BKPF-BUKRS
*" REFERENCE(P_BLDAT) LIKE BKPF-BLDAT
*" REFERENCE(P_BUDAT) LIKE BKPF-BUDAT
*" REFERENCE(P_MONAT) LIKE BKPF-MONAT
*" REFERENCE(P_WAERS) LIKE BKPF-WAERS
*" REFERENCE(P_BKTXT) LIKE BKPF-BKTXT
*" TABLES
*" IN_JE_XLS STRUCTURE ZFGI_JE_STR
ITAB-BSCHL = 40.
ITAB-SAKNR = '812070'.
ITAB-WRBTR = '30881.00'.
ITAB-KOSTL = '11620009'.
APPEND ITAB.
MOVE P_BUDAT(4) TO TEM+4(4).
MOVE P_BUDAT+4(2) TO TEM(2).
MOVE P_BUDAT6(2) TO TEM2(2).
MOVE P_BUDAT(4) TO TEM+4(4).
MOVE P_BUDAT+4(2) TO TEM(2).
MOVE P_BUDAT6(2) TO TEM2(2).
MOVE P_BLDAT(4) TO TEM1+4(4).
MOVE P_BLDAT+4(2) TO TEM1(2).
MOVE P_BLDAT6(2) TO TEM12(2).
MOVE P_BLDAT(4) TO TEM1+4(4).
MOVE P_BLDAT+4(2) TO TEM1(2).
MOVE P_BLDAT6(2) TO TEM12(2).
WRITE ITAB-WRBTR TO WRBTR.
CONDENSE WRBTR NO-GAPS.
WRITE ITAB-BSCHL TO T_BSCHL NO-GROUPING LEFT-JUSTIFIED.
IF ITAB-KOSTL+8(2) EQ SPACE.
MOVE ITAB-KOSTL TO HOLD_KOSTL+2(8).
MOVE '00' TO HOLD_KOSTL(2).
ELSE.
MOVE ITAB-KOSTL TO HOLD_KOSTL.
ENDIF.
FIELD_LENGTH = STRLEN( ITAB-SAKNR ).
IF FIELD_LENGTH EQ 10.
MOVE ITAB-SAKNR TO HOLD_SAKNR.
ELSE.
MOVE ITAB-SAKNR(6) TO HOLD_SAKNR+4(6).
MOVE '0000' TO HOLD_SAKNR(4).
ENDIF.
PERFORM NEW_DYNPRO USING 'SAPMF05A' '0100'.
PERFORM NEW_FIELD USING 'BKPF-BUDAT' TEM.
PERFORM NEW_FIELD USING 'BKPF-BLDAT' TEM1.
PERFORM NEW_FIELD USING 'BKPF-MONAT' P_MONAT.
PERFORM NEW_FIELD USING 'BKPF-WAERS' 'USD'.
PERFORM NEW_FIELD USING 'BKPF-BUKRS' P_BUKRS.
PERFORM NEW_FIELD USING 'BKPF-BKTXT' P_BKTXT.
PERFORM NEW_FIELD USING 'RF05A-NEWBS' T_BSCHL.
PERFORM NEW_FIELD USING 'RF05A-NEWKO' HOLD_SAKNR.
PERFORM NEW_FIELD USING 'BDC_OKCODE' '/11'.
PERFORM NEW_DYNPRO USING 'SAPMF05A' '0300'.
PERFORM NEW_FIELD USING 'BSEG-WRBTR' WRBTR.
PERFORM NEW_FIELD USING 'RF05A-NEWKO' ' '.
PERFORM NEW_FIELD USING 'RF05A-NEWBS' ' '.
PERFORM NEW_FIELD USING 'BDC_OKCODE' '/11'.
PERFORM NEW_DYNPRO USING 'SAPLKACB' '0002'.
PERFORM NEW_FIELD USING 'COBL-KOSTL' HOLD_KOSTL.
CALL TRANSACTION 'F-02' USING BDCDATA MODE 'A' UPDATE 'S'. -
ABAP Runtime Error CONV_NO_NUMBER
Dear all,
I am calling transaction F-02 for posting G/L Account from an FM. I tried with the Header Data and Account and Cost Centre but it says ABAP Runtime Error CONV_NO_NUMBER. I undersood that its because of the Number interpretation and coded accordingly but still it throws the same error.
Can you please help me in this....
With Regards
JayHi Sharma
the dump occured CX_SY_CONVERSION_NO_NUMBER
while executing the transaction some of the procedures may not raise and this dump throws, make a note of the actions in st22 and intimate to the ABAP team.
Follow the link
http://www.bwexpertonline.com/downloads/source_code.doc
Regards
Bhaskar
Edited by: bhaskar1818 on Jun 20, 2008 5:25 PM -
ABAP Runtime error when using RSPC
Hi Team,
I am getting ABAP runtime error when using RSPC in my system.For the same user id in other systems this transaction is working fine.Pls help me.
regds
ShaHello Sha Han,
What is the runtime error you are getting?
Please check the authorization also for the user in that system
Thanks
Chandran -
ABAP runtime errors "SPOOL_I/O_ERROR"
Hi All,
I had problem when run the job program "SAPFGRWE". Suddenly the job terminated and the error message appear is "ABAP runtime errors - SPOOL_I/O_ERROR" . I'm using DB Oracle. SAP Release is 40B.
Please help me on this matter.
Thank YouHi,
Cleanup your old spool requests suing the report: RSPO1041.
Please do a temse consistency check in txn. SP12 and then clearn the entire temse.
Also, refer to SAP Note 1336 (Spooler reports data base I/O error) for this error.
Regards,
Shitij -
ABAP runtime errors SNAP_NO_NEW_ENTR
The following errors occured just after login, can anyone tell me how to handle it?
ABAP runtime errors SNAP_NO_NEW_ENTRY
Occurred on 0000.00.00 at 13:47:44
Runtime error: Unable to write short dump.
What happened?
The current ABAP/4 program " " had to be terminated because
one of the statements could not be executed.
This is probably due to an error in the ABAP/4 program.
Unfortunately, the original cause of the error cannot be determined
because there is no suitable short dump in the table SNAP (which
records information about the point of termination).
termination).
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
Error analysis
Unfortunately, the original cause of the error cannot be
determined, since there is no suitable short dump in table SNAP.
The table SNAP probably already contains a number of short dumps
and cannot accept any more. Please check the situation using the
system log.
The table SNAP contains all the short dumps for the last 7 days.
How to correct the error
Check the system log for each cause of error.
More space probably needs to be provided for table SNAP
using database means.
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:hello,
Check these:
Note 495297 - DB6: Monitoring transaction log
Re: Question. usage of transaction log
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f03d5fb8-b619-2b10-c383-c6d56872829e&overridelayout=true
Ideally, db2diag.log should tell you this information.
Hope it helps.
thanks,
Prasanna -
ABAP Runtime Error while executing planning folder
Hi experts.
We have a situation where I can access our planning folders but that's not the case for one of our user. She encountered with an ABAP Runtime Error as follow:
Appreciate if anyone can help me out with this.
Runtime Error RAISE_EXCEPTION
Date and Time 20.04.2007 16:50:23
ShrtText
Exception condition "X_MESSAGE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
A RAISE statement in the program "SAPLRSSBR" raised the exception
condition "X_MESSAGE".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Cancel
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"RAISE_EXCEPTION" C
"SAPLRSSBR" or "LRSSBRU03"
"RSSB_AUTHORITY_IOBJVL_CHECK"
or
"SAPLRSSBR" "X_MESSAGE"
or
"UPB_PM_CUST_START " "X_MESSAGE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "S53KJ165"
Network address.......... "10.1.53.165"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C3A11F4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 3
Short dump setting....... "full"
Database server.......... "S53KJ170"
Database type............ "ORACLE"
Database name............ "BWP"
Database owner........... "SAPBWP"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Oct 29 2006 20:42:11"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "155"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 16759712
Heap..................... 0
Page..................... 57344
MM Used.................. 10079624
MM Free.................. 2487240
SAP Release.............. "640"
User and Transaction
Client.............. 350
User................ "S51643"
Language key........ "E"
Transaction......... "UPSPL "
Program............. "SAPLRSSBR"
Screen.............. "SAPLUPB_PM_ALV 1000"
Screen line......... 2
Information on where terminated
The termination occurred in the ABAP program "SAPLRSSBR" in
"RSSB_AUTHORITY_IOBJVL_CHECK".
The main program was "UPB_PM_CUST_START ".
The termination occurred in line 416 of the source code of the (Include)
program "LRSSBRU03"
of the source code of program "LRSSBRU03" (when calling the editor 4160).
Source Code Extract
Line
SourceCde
386
l_s_range-low = l_activity.
387
APPEND l_s_range TO l_sx_auth_check_detail-range.
388
INSERT l_sx_auth_check_detail INTO TABLE <l_sx_auth_check>-auth_check_detail.
389
390
CALL FUNCTION 'RSSB_AUTHORITY_IOBJVL_REDUCED'
391
EXPORTING
392
i_infocube = g_sx_iobjvl_check-infocube
393
i_uname = l_uname
394
i_th_hierarchy = g_sx_iobjvl_check-hierarchy
395
i_message = i_message
396
i_activity_force_check = i_activity_force_check
397
CHANGING
398
c_tsx_auth_check_detail = <l_sx_auth_check>-auth_check_detail
399
c_tx_no_auth = l_tx_no_auth
400
c_ts_auth_tlevel = e_ts_auth_tlevel
401
EXCEPTIONS
402
user_not_authorized = 1
403
auth_check_failure = 2
404
auth_check_error = 3
405
inherited_error = 4
406
x_message = 5.
407
IF sy-subrc = 0.
408
REFRESH l_tx_no_auth.
409
CR 20050826 HW873685 SP29 Part 2/3 begin
410
SY-SUBRC = 2 means Auth-Obj missing in users profiles, we need this later
411
ELSEIF sy-subrc = 2.
412
ao_missing = rs_c_true.
413
e_subrc = 2.
414
CR 20050826 HW873685 SP29 Part 2/3 end
415
ELSEIF sy-subrc = 5.
>>>>>
RAISE x_message.
417
ELSE.
418
e_subrc = 2.
419
ENDIF.
420
421
correct the kid now
422
LOOP AT l_tx_no_auth INTO l_sx_no_auth.
423
l_sx_no_auth-kid = <l_sx_auth_check>-kid.
424
APPEND l_sx_no_auth TO e_tx_no_auth.
425
ENDLOOP.
426
427
ENDLOOP.
428
429
End LOOP: Check all SUBNR (FEMS)
430
431
432
CR 20050826 HW873685 SP29 Part 3/3 begin
433
If an Auth-Obj. is missing, no SUBNR can be authorized. Due to OLAP-logic
434
this means empty no_auth table
435
IF ao_missing = rs_c_true.
Contents of system fields
Name
Val.
SY-SUBRC
5
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
210
SY-UCOMM
SELECT
SY-TITLE
Execute All Cost Element
SY-MSGTY
E
SY-MSGID
R7
SY-MSGNO
057
SY-MSGV1
0CO_AREA
SY-MSGV2
A
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
40 FUNCTION SAPLRSSBR LRSSBRU03 416
RSSB_AUTHORITY_IOBJVL_CHECK
39 FORM SAPLRSDRC LRSDRCF15 113
AUTHORITY_CHECK
38 FORM SAPLRSDRC LRSDRCF27 57
BASIC_QUERY_DATA_GET_ROLAP
37 FUNCTION SAPLRSDRC LRSDRCU05 44
RSDRC_BASIC_QUERY_DATA_GET
36 FUNCTION SAPLRSDRC LRSDRCU15 189
RSDRC_BASIC_CUBE_DATA_GET
35 FORM SAPLRSDRC LRSDRCF25 373
DATA_GET
34 FUNCTION SAPLRSDRC LRSDRCU02 249
RSDRC_CUBE_DATA_GET
33 FUNCTION SAPLRSDRI LRSDRIU01 352
RSDRI_INFOPROV_READ
32 FORM /1SEM/UPCBW_350TMWPA01 UPC_BWINTERFC__FIX 174
DATA_READ
31 FUNCTION SAPLUPCBW LUPCBWU06 56
UPC_BW_DATA_READ
30 FUNCTION SAPLUPC1 LUPC1U06 67
UPC_DATA_READ
29 METHOD /1SEM/CL_DATA_350TMWPA01======CP UPC_DATA_READ_DB 25
/1SEM/CL_DATA_350TMWPA01=>IF_SEM_DATA_INTERNAL~READ_DB
28 METHOD /1SEM/CL_BUFFER_350TMWPA01====CP UPC_BUFFER_GET 167
/1SEM/CL_BUFFER_350TMWPA01=>IF_SEM_BUFFER~GET
27 METHOD /1SEM/CL_BUFFER_350TMWPA01====CP UPC_BUFFER_READ 5
/1SEM/CL_BUFFER_350TMWPA01=>IF_SEM_BUFFER~READ
26 METHOD /1SEM/CL_DATA_350TMWPA01======CP UPC_DATA_READ 46
/1SEM/CL_DATA_350TMWPA01=>IF_SEM_DATA~READ
25 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 395
READ_TRANSACTION_DATA
24 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 561
GET_DATA
23 FORM 45AJEHYBGH37F61DTX80Q9ZFP UPP_PLAN 800
EC500_SELECT_DATABASE
22 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 575
SELECT_DATABASE
21 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 464
SELECT_AND_FIND_HEADER_COMBI
20 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 217
LOGICAL_SCREEN_FILL_HEADER
19 FORM SAPLUPP_PP_KERNEL LUPP_PP_KERNELF97 60
LOGICAL_SCREEN_FILL
18 FUNCTION SAPLUPP_PP_KERNEL LUPP_PP_KERNELU01 114
UPP_PP_KERNEL_CONSTRUCTOR
17 METHOD CL_UPB_PL_ALV=================CP CL_UPB_PL_ALV=================CM01E 176
CL_UPB_PL_ALV=>CONSTRUCTOR
16 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 623
OUTPUT_CREATE
15 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 202
OUTPUT_INIT
14 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 1062
OUTPUT_PROCESS
13 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF01 1225
OUTPUT_SWITCH_TO_LAYOUT
12 FORM SAPLUPB_PM_ALV LUPB_PM_ALVF05 748
INIT_CONTROLS
11 MODULE (PBO) SAPLUPB_PM_ALV LUPB_PM_ALVO01 13
STATUS
10 FUNCTION SAPLUPB_PM_ALV LUPB_PM_ALVU01 24
UPB_PM_ALV_START
9 METHOD CL_UPB_PM_APPLC===============CP CL_UPB_PM_APPLC===============CM00A 88
CL_UPB_PM_APPLC=>EXECUTE_PM
8 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM00L 76
CL_UPB_PM_ADMIN=>PAI_ONE_NODE
7 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM00L 23
CL_UPB_PM_ADMIN=>PAI_ONE_NODE
6 METHOD CL_UPB_PM_ADMIN===============CP CL_UPB_PM_ADMIN===============CM003 121
CL_UPB_PM_ADMIN=>PAI
5 FORM SAPLUPB_PM LUPB_PMF04 80
USER_COMMAND_0210
4 MODULE (PAI) SAPLUPB_PM LUPB_PMI04 11
USER_COMMAND_0210
3 FUNCTION SAPLUPB_PM LUPB_PMU22 86
UPB_PM_MAIN
2 FORM UPB_PM_CUST_START UPB_PM_START_ADMIN 251
PM_START
1 EVENT UPB_PM_CUST_START UPB_PM_START_ADMIN 14
START-OF-SELECTION
Chosen variables
Name
Val.
No. 40 Ty. FUNCTION
Name RSSB_AUTHORITY_IOBJVL_CHECK
I_ACTIVITY
03
33
03
I_ACTIVITY_FORCE_CHECK
2
0
I_MESSAGE
X
5
8
I_SX_IOBJVL_CHECK
ZCTMWMA05 ####
5454544332222222222222222222222222222222222222222222222222222222222222222222222222222222220000
A34D7D1050000000000000000000000000000000000000000000000000000000000000000000000000000000000000
I_UNAME
S51643
533333222222
351643000000
E_SUBRC
0
0000
0000
E_TS_AUTH_TLEVEL
Table[initial]
E_TX_NO_AUTH
Table[initial]
RSSB_C_AUTH_KEYFIGURE
1KYFNM
3454442222
1B96ED0000
SY-REPID
SAPLRSSBR
5454555452222222222222222222222222222222
310C233220000000000000000000000000000000
SYST-REPID
SAPLRSSBR
5454555452222222222222222222222222222222
310C233220000000000000000000000000000000
%_SPACE
2
0
RS_C_RANGE_SIGN
IE
44
95
SY-SUBRC
5
0000
0005
L_TX_NO_AUTH
Table[initial]
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
SYST
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1. ###################################################à##############
0000000000000000000000000002000000000000000000000000000000000000000000000000000E00000000000000
0001000000000000000000000000000000000000000000010001000000010000000000000000000000000000000000
L_SX_NO_AUTH
############ÿÿÿÿ
000000000000FFFF
000000000000FFFF
L_SX_NO_AUTH-KID
Table[initial]
<L_SX_AUTH_CHECK>-KID
Table IT_33029[1x4]
FUNCTION-POOL=RSSBRDATA=G_SX_IOBJVL_CHECK-AUTH_CHECK[1]-KID
Table reference: 2052
TABH+ 0(20) = 07000000908D2FD0000000000000000000000000
TABH+ 20(20) = 00000804000081050000000100000004FFFFFFFF
TABH+ 40(16) = 040002F1000003480001432821000000
store = 0x07000000908D2FD0
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 2052 (0x00000804)
label = 33029 (0x00008105)
fill = 1 (0x00000001)
leng = 4 (0x00000004)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000003
occu = 1 (0x00000001)
access = 2 (ItAccessSorted)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 2 (table_line)
cmpMode = 5 (cmpSingle)
occu0 = 0
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908E0CC8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 1 (0x00000001)
lineAlloc = 1 (0x00000001)
store_id = 6998 (0x00001B56)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
No. 39 Ty. FORM
Name AUTHORITY_CHECK
I_TH_SFC
Table IT_32090[14x128]
FUNCTION=RSDRC_BASIC_CUBE_DATA_GETDATA=L_TH_SFC
Table reference: 1757
TABH+ 0(20) = 070000009052D8F8070000009081372800000000
TABH+ 20(20) = 000006DD00007D5A0000000E00000080FFFFFFFF
TABH+ 40(16) = 040002DB000017C80010839401000000
store = 0x070000009052D8F8
ext1 = 0x0700000090813728
shmId = 0 (0x00000000)
id = 1757 (0x000006DD)
label = 32090 (0x00007D5A)
fill = 14 (0x0000000E)
leng = 128 (0x00000080)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000099
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000090811F18
pghook = 0x0000000000000000
idxPtr = 0x070000009052D950
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6872 (0x00001AD8)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0700000090813588
hsdir = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
CL_RSO_REPOSITORY=>P_C_BAL_LOG_SUBOBJEC_INST
SY-REPID
SAPLRSDRC
5454554542222222222222222222222222222222
310C234230000000000000000000000000000000
L_S_RANGE-LOW
1ROWCOUNT
354544545222222222222222222222222222222222222222222222222222
12F73F5E4000000000000000000000000000000000000000000000000000
<L_S_SFK>-KYFNM
1ROWCOUNT
354544545222222222222222222222
12F73F5E4000000000000000000000
RSDRC_C_QUERYMODE-CUMULATIVE
C
4
3
S_S_COB_PRO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_SX_SELDR-RANGE+8(8)
Table IT_32110[2x136]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_SX_SELDR
Table reference: 1902
TABH+ 0(20) = 0700000090813D10000000000000000000000000
TABH+ 20(20) = 0000076E00007D6E0000000200000088FFFFFFFF
TABH+ 40(16) = 040002DB00001AA00010254421000000
store = 0x0700000090813D10
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 1902 (0x0000076E)
label = 32110 (0x00007D6E)
fill = 2 (0x00000002)
leng = 136 (0x00000088)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000112
occu = 16 (0x00000010)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 2 (table_line)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908800F8
pghook = 0x0000000000000000
idxPtr = 0x0000000000000000
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6876 (0x00001ADC)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
L_S_RANGE
IEQ1ROWCOUNT
4453545445452222222222222222222222222222222222222222222222222222222222222222222222222222222222
95112F73F5E40000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_TSX_SELDR
Table IT_32094[13x120]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_TSX_SELDR
Table reference: 1870
TABH+ 0(20) = 0700000090813AE007000000908DF36800000000
TABH+ 20(20) = 0000074E00007D5E0000000D00000078FFFFFFFF
TABH+ 40(16) = 040002DB000018A8000C4B9C01000000
store = 0x0700000090813AE0
ext1 = 0x07000000908DF368
shmId = 0 (0x00000000)
id = 1870 (0x0000074E)
label = 32094 (0x00007D5E)
fill = 13 (0x0000000D)
leng = 120 (0x00000078)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000103
occu = 12 (0x0000000C)
access = 2 (ItAccessSorted)
idxKind = 1 (ItIndexLinear)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 3 (cmpSingleMcmpU)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x070000009087FB40
pghook = 0x0700000090813D68
idxPtr = 0x0700000090813DA0
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 36 (0x00000024)
lineAlloc = 36 (0x00000024)
store_id = 6875 (0x00001ADB)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x07000000908DED00
hsdir = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
L_SX_SELDR
00001KYFNM ########300 0 ####ÿÿÿÿ#### 0 ######## ####ÿÿ
333334544422222222222222222222222222000000003332223222220000FFFF0000223200000000222222220000FF
00001B96ED00000000000000000000000000000000003000000000000000FFFF0000000000000000000000000000FF
G_RUNNING
0
0000
0000
L_BASICCUBE
ZCTMWMA05
545454433222222222222222222222
A34D7D105000000000000000000000
L_TH_FREE
Table IT_32093[6x30]
FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_TH_FREE
Table reference: 1763
TABH+ 0(20) = 0700000090813760000000000000000000000000
TABH+ 20(20) = 000006E300007D5D000000060000001EFFFFFFFF
TABH+ 40(16) = 040002DB00001B800010831401000000
store = 0x0700000090813760
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 1763 (0x000006E3)
label = 32093 (0x00007D5D)
fill = 6 (0x00000006)
leng = 30 (0x0000001E)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000116
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 2 (table_line)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000908137B8
pghook = 0x0000000000000000
idxPtr = 0x07000000908139B0
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6874 (0x00001ADA)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SYST-REPID
SAPLRSDRC
5454554542222222222222222222222222222222
310C234230000000000000000000000000000000
L_SX_IOBJVL_CHECK
ZCTMWMA05 ####
5454544332222222222222222222222222222222222222222222222222222222222222222222222222222222220000
A34D7D1050000000000000000000000000000000000000000000000000000000000000000000000000000000000000
L_ACTIVITY
03
33
03
SY-UNAME
S51643
533333222222
351643000000
S_MULTICUBE
222222222222222222222222222222
000000000000000000000000000000
E_SUBRC
0
0000
0000
%_VIASELSCR
0
4
S_CHANM
222222222222222222222222222222
000000000000000000000000000000
I_RAISE_EXCEPTION
X
5
8
RS_C_TRUE
X
5
8
SCREEN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 38 Ty. FORM
Name BASIC_QUERY_DATA_GET_ROLAP
E_T_DATA
Table[initial]
E_END_OF_DATA
2
0
C_FIRST_CALL
X
5
8
S_S_QPARAM
XX 0 ##ÿÿÿÿ####DB-VIEW R ###dABAP-TABLE
25523200FFFF0000442544522222222222222222222222222222222222222222222222520006444525444422222222
08800000FFFF000042D6957000000000000000000000000000000000000000000000002000041210D412C500000000
C_S_QPARAM-AUTHORITY_CHECK
R
5
2
RSDRC_C_AUTHCHK-NONE
2
0
RSJOBINFO
00000000000000 ####
222222222222222222222222222222223333333333333322222222222222222222222222222222220000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RSD_C_DPANM
0REQUID 0CHNGID 0RECORDTP 0IOB
3545544222222222222222222222223444444222222222222222222222223544454552222222222222222222223444
025159400000000000000000000000038E794000000000000000000000000253F244000000000000000000000009F2
SPACE
2
0
I_BASICCUBE
ZCTMWMA05
545454433222222222222222222222
A34D7D105000000000000000000000
I_TH_SFC
Table IT_32090[14x128]
I_TH_SFK
Table IT_32091[2x128]
FUNCTION=RSDRC_BASIC_CUBE_DATA_GETDATA=L_TH_SFK
Table reference: 1767
TABH+ 0(20) = 0700000090887AC00700000090813CD800000000
TABH+ 20(20) = 000006E700007D5B0000000200000080FFFFFFFF
TABH+ 40(16) = 040002DB000018380010839421000000
store = 0x0700000090887AC0
ext1 = 0x0700000090813CD8
shmId = 0 (0x00000000)
id = 1767 (0x000006E7)
label = 32091 (0x00007D5B)
fill = 2 (0x00000002)
leng = 128 (0x00000080)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000101
occu = 16 (0x00000010)
access = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUnique)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0700000090884C90
pghook = 0x0000000000000000
idxPtr = 0x0700000090827A98
refCount = 1 (0x00000001)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x00000010)
lineAlloc = 16 (0x00000010)
store_id = 6857 (0x00001AC9)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0700000090813B38
hsdir = 0x0000000000000000Have you check or trace Authorization??
In DUMP:
Information on where terminated
The termination occurred in the ABAP program "SAPLRSSBR" in
"RSSB_AUTHORITY_IOBJVL_CHECK".
The main program was "UPB_PM_CUST_START ". -
ABAP Runtime error in FM BBP_VENDOR_GET_DATA2 in R/3
Hi Gurus
We are receiving nearly 1000 ABAP runtime error in the Functional Module BBP_VENDOR_GET_DATA2 in the user ID as RFCPROD in the ST22 and in the dump details as soon below.
Possible error causes:
o The maximum size of an SQL statement was exceeded.
o The statement contains too many input variables.
o The input data requires more space than is available.
And this is happening in this place.
48| IF NOT LRT_ADDRNR[] IS INITIAL. |
|>>>>>| SELECT * APPENDING TABLE ITAB_ADRC FROM ADRC .
We enter the T-code XK01, XK02 and XK03 , then enter the details of vendor , press enter immediately one count is increasing in the ST22.
Please any one can suggest .
Thanks & Regards
SadaHi Sadasivam Soliyappan,
Could you please share the SAP Note number with us urgently?
We have been encountered with the same problem unfortunately.
Thanks in advance.
Dolunay. -
ABAP runtime errors COMPUTE_BCD_OVERFLOW
ABAP runtime errors COMPUTE_BCD_OVERFLOW
Occurred on 12/08/2010 at 06:44:17
>> Short dump has not been completely stored. It is too big.
Error analysis
An overflow has been determined in the current arithmetical operation
containing operands of type P. Possible causes include:
1. The results field of type P is to small and the result does not fit
into it.
places.
2. The result or partial result has more than 31 decimal places.
How to correct the error
You may need to define the result field to be larger, if it is still
possible to do so.
It may be possible to split the current process so that only smaller
values occur.
Eine Vorablösung zu dem aufgetretenen Fehler findet sich vielleicht
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
If you require an interim solution to this error, you can look in the
SAP note system. If you have access to
the SAP notes system yourself, enter the following search strings:
"COMPUTE_BCD_OVERFLOW"
"BCD_FIELD_OVERFLOW" (By release 4.0a, this error has been remedied at this
point)Hi Ganapati,
Check this thread COMPUTE_BCD_OVERFLOW in Database Performance collector.
Note 543749 - ABAP runtime error COMPUTE_BCD_OVERFLOW
It may helps you. -
Urgent(abap runtime error)
hi all,
when i tried to findout the name(collective search) by last name o'brien in PA20 OR PA30 transacton i got the abap runtime error in production
but when i tried samething in development and quality by lastname o'brein in PA20 OR PA30 TRANSACTION i got the 4 names .please let me know what is the problem . it is very urgent.
thanks in advance
rama.Hi
What is the runtime error u got
Regards
Pavan -
ABAP Runtime Error in [VL01N]
HI All,
Kindly suggest some line for the followings
While doing PGI (Posting Goods Issue) in delivery at t.code [VL01N] there is an ABAP Runtime Error
And some part of the analysis is
Information on where terminated:
Termination occurred in the ABAP program "SAPLMBWL" - in "MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A".
In the source fode you have the termination point in line 59 of the (Include) program "LMBWLU21".
Let me know
Being a SD consultant what I can do
And how I can proceed to complete the sd-cycle by working on ECC6.0
Guide me soon please Gurus..........Termination occurred in the ABAP program "SAPLMBWL" - in "MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A".
Go to SE80,choose Program and enter SAPMV50A ,check does it contain your Inlcude LMB* if not check other SAPLMBWL pgm ,n check..
go to the include ,this might be a FM also.. so check properly and than put a break point. -
ABAP runtime error in ME2N Transaction
Hi All,
I am getting an ABAP runtime error when i run transaction ME2N and then click on th Account Assignment Button.
This is the error i get.
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 06/01/2009 16:35:59
Short text
Field symbol has not yet been assigned.
The section of the code which is creating problem is
2326|*... ... find the row that holds the first requested cell |
2327
loop at ct_stin assigning <ls_stin>
2328
where start_indx le i_start.
2329
l_start = sy-tabix.
2330
endloop. "Y6DK065306
>>>>>
if <ls_stin>-filled eq abap_false.
2332
lt_delete_row-low = <ls_stin>-row_pos.
2333
lt_delete_row-sign = 'I'.
2334
lt_delete_row-option = 'EQ'.
2335
insert lt_delete_row into table lt_delete_row.
2336
endif.
| 2337|
the internal table ct_stin is not gettin any data in Runtime.
Can anybody help me out in analysing this.
SaurabhAs I understand you have modify the standard SAP program. The problem is when the internal table
ct_stin does not have data the field symbol <ls_stin> does not have any assign. to correct this
LOOPAT CT_STIN ASSIGNING <LS_STIN>
WHERE START_INDX LE I_START.
L_START = SY-TABIX.
ENDLOOP. "Y6DK065306
Check <LS_STIN> IS Assigned.
IF <LS_STIN>-FILLED EQ ABAP_FALSE.
LT_DELETE_ROW-LOW = <LS_STIN>-ROW_POS.
LT_DELETE_ROW-SIGN = 'I'.
LT_DELETE_ROW-OPTION = 'EQ'.
INSERT LT_DELETE_ROW INTO TABLE LT_DELETE_ROW.
ENDIF.
Maybe you are looking for
-
1.1 - vista - photos don't display
I upgraded to V1.1 on my Dell Inspiron 9400 and the photos no longer display. I read a couple of other posts that suggested remomving/changing/upgrading video drivers. I've done this, plus removal and reinstall of Lightroom, plus brand new catalogs a
-
What photo printers are compatible with iPhoto '08?
On Apple's support site, they list the printer drivers that Leopard comes with, but I'm finding that just because Leopard comes with the driver, that doesn't necessarily mean the printer is compatible with iPhoto... unless my research has mislead me.
-
New Apple application PHOTOS vs APERTURE
Hello to everyone. With the coming of the new application PHOTOS (that is not a professional one) will APPLE continue to support APERTURE? (I mean with new updates and new releases for the next MAC OS systems) If not what is that best way to work? Ch
-
CF-Flex wizard application problem
I have built several simple CF-Flex wixard apps in which everything seems to look fine--buttons for add, edit, delete are displayed--but when I add a record and then Save it, the record does not appear in the master list. I also looked in the raw dat
-
after upgrading to iTunes 11.01.12 the air-play button disapeared. the apple-TV3 and the receiver can communicate, but in my computer there is no button to play on any other speaker/unit. it seems that iTunes can find them. i did everything on the ch