PLEASE HELP about my brand new Nokia N78. multimed...
i just bought a Nokia N78 Unlocked 3G GSM Phone with GPS, MP3 Player & 3.2 Megapixel Camera
im having trouble with the multimedia key. when i pres it, its not showing the multimedia menu. it just refresh the screen.
Solved!
Go to Solution.
03-Nov-2008 07:42 PM
flak4 wrote:
Suggest a hard reset (*#7370#* from standby). If that doesn't work, try upgrading the firmware.
JFTR, that's a soft reset. A hard reset is achieved by powering on the phone with the '*', '3' and 'multimedia' keys pressed down.
What you're probably thinking of as a soft reset (*#7780#) is just a "revert to factory default settings". Nothing is formatted.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!
Similar Messages
-
Please HELP!! Brand New iMac- Won't turn on!!!!!
Someone please help!!
I JUST purchased a brand new iMac today, no more than 4 hours ago! I brought it home and followed the set up instructions and pressed the "power" button.
The fan comes on- it sounds weak to me, then it slows down, the little white light at the botton right hand side comes on, but the screen remains BLACK!!! Nothing comes on my screen!!
I am NEW to Apple, so I am CLUELESS as to why this is happening or what is going on- not to mention EXTREMELY AGGRAVATED that I cannot find any tech support AT ALL- not on the phone, not on chat, not anywhere!!! I have waited almost 2 yrs to purchase a new computer- I chose an iMac, and this is the crap I get.
Please help!!!!
iMac 17inch Mac OS X (10.4.4) NewDawn,
Having suffered my share of 'difficult' products, I can understand your frustration. This is compounded by the financial restraint you exhibited for 2 years of saving. Your experience should not just be good, it should be exceptional.
There may be something wrong with your machine. The white light is on when the machine is booting or the display is sleeping. The light will softly flash on and off while the machine is sleeping.
The fan should be as quiet as possible, to the point of being a low rumble/whisper or not even heard. It sounds like your computer is stuck in a startup mode.
Calling Apple will get this issue resolved to your satisfaction in a timely manner. If you state the issues they should be more than helpful. You can try a few things for now.
Press and hold the power button on your machine for a while and see if it reboots.
If you look on this page:
http://docs.info.apple.com/article.html?artnum=303124
You will notice the instructions for zapping the pram (keys held down when you press the power button and held continuously) : Press Option-Command-P-R until you hear two beeps (release)
Try that next. Your machine should be restarting when you toggle the power button.
Another quick thing you may want to try is shutting down the machine, unplugging everything (every cable including the power cable), waiting about 2 minutes, then plugging in just the keyboard and mouse and starting the machine with the power button.
Good Luck,
-j -
icalentor and ilife keep asking me about the keychain password ,wich i don't event know about (login password dosn't work), if any one knows about this ,and how to avoid from that ? thank you ! please help ,.i am a new mac user .
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544 -
Joikuspot not working on brand new Nokia 808
I've just purchased a Nokia 808 from Singapora and tried using Joikuspot. Unfortunately for some reason it fails to start a connection. I've made sure that BOTH mobile data and wifi are on as well. When I start the program, it asks if I want to start a connection (to which I say yes), I choose AT&T Internet and wait. I can see the 3G internet icon start up, but the wifi icon (or transmitting icon) never appears and the message "Connection failed, Connection unavailable" appears up at the top.
I've tried reinstalling Joikuspot (well, I purchased the premium version actually), reinstalling the phone software (via Nokia Suite) and doing a factory reset with no success. Internet and other apps seem to work fine under 3G and wifi as well so I'm not sure what's going on. Any information regarding the matter would be extremely helpful. Thanks everyone.
Jon
Btw, I've also contacted the people at Joiku and what they've recommended (factory reset, checking certain settings) hasn't worked either. :-(Hi all,
This post is about using the third party application JoikuSpot in USA (and other FCC governed countries) and is copied to the following threads:
http://discussions.nokia.com/t5/Phone-Applications/Joikuspot-not-working-on-brand-new-Nokia-808/m-p/...
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Pureview-808-Intermittent-wireless-c...
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Help-Does-non-US-variant-808-purevie...
1) It doesn't matter where you get your Nokia 808 PureView from, ie it doesn't matter if it's a US, Singapore or Finnish variant.. If you are using that device on a network/carrier in the US, the device recognises this and is not going to allow you to make Ad-Hoc wlan connections, as per the regulations set out by the FCC.
2) I understand (this I am not certain on) that the FCC regulations came into force in 2011. Therefore for any device manufacturer since then, the device is not allowed to create Ad-Hoc networks otherwise the device manufacturer wouldn't get FCC approval.
3) The FCC restrictons are in this case technically talking about Ad-Hoc networks, not 'wifi direct' (http://en.wikipedia.org/wiki/Wi-Fi_Direct) networks that are used for example in Lumia 610/710/800/900.
4) I understand the US Variants of Nokia 808 PureView do not have JoikuSpot preinstalled.
5) I understand that US customers are not able to purchase JoikuSpot from Nokia Store.
6) JoikuSoft should be aware of this as they are making the software to create the Ad-Hoc networks. I will find someone to talk to JoikuSoft, failing that I will do it myself. I noticed a post from 'greentoy' claiming "According to Joikusoft Support, It should work fine in US, but they didn't know for sure.". Greentoy, if you're reading this please post me the JoikuSoft contact you had so I can sort this out with them.
It goes without saying, if you have Nokia 808 PureView in the US, and are using JoikuSpot successfully, then I am happy for you and don't want to cause problems for you, but I suspect the FCC would be happy to tell you about their feelings..
Are there any other questions I should be aware of using JoikuSpot in the US before I try to get in touch with JoikuSoft? -
Brand New Nokia C6 hanging lots.
Hi,
I just bought a brand new Nokia C6. I have to say, i'm very satisfied with the phone when it's in good shape, but it hangs a lot. When I lock the keypad on my phone, the phone locks itself and no amount of pressing and holding any button will revive it. This happens randomly. I have to remove and replace the battery. This happens around 6-7 times a day. I have tried to reset the phone, but it still got the problem.
Does anyone have ANY help to offer?Hi
Same here..Bought Nokia C6-00 on the 8th of October. It keeps on hanging when I lock or unlock the touchscreen. t\This is the first time Nokia has disappointed me. After reading all these discussions it seems like this model itself is problematic.
Pranab
linhchi wrote:
Hi,
I just bought a brand new Nokia C6. I have to say, i'm very satisfied with the phone when it's in good shape, but it hangs a lot. When I lock the keypad on my phone, the phone locks itself and no amount of pressing and holding any button will revive it. This happens randomly. I have to remove and replace the battery. This happens around 6-7 times a day. I have tried to reset the phone, but it still got the problem.
Does anyone have ANY help to offer? -
Dear Apple Support , I can't remember my security question answers , so Please help me to Create new Security Question for my Account . Best wishes
<Email Edited by Host>Welcome to the user to User Technical Support Forum provided by Apple.
Please do not post personal information on a Public Forum.
I have requested the Hosts remove it for you
For your issue...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers. -
rt ,
This is ***majed*** ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .
Best wishes,If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use -
I can't remember my security question answers , so please help me to Create new Security Question for my Account : **********
, Best wishes
<Personal Information Edited by Host>We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use -
Please help me creating a new listener with different port#.
I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
But that is not happening.
here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps2/oracle)
(PROGRAM = extproc)
LISTENER1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
Please help me creating a new listener with different port#.
Thanks,marist89 wrote:
sb92075 wrote:
marist89 wrote:
sybrand_b wrote:
The listener is a broker only and doesn't play any role in normal communications.
It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
Just because you can do something, it does not necessarily mean it should be done. -
please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks
Personal rant, why do people write the entire problem in topic line
It's not possible with Windows Phone 8. What's the point, a call is coming in and the phone allows you to answer. -
Please Help me in Assigning New Id for Different persons
version 11g
please Help me in assiging new person id for dirrerent persons if there middle name is different
I listed Out Three Scenarios in the below example. Please help me out
WITH NAMES AS(
/* Scenario1 -- Three dirrerent people so assign Three diffrrent ID,
keeping 1 id as is and assign two new ids from sequence*/
SELECT 47540310 ID , 'WO' LAST_NAME , 'ROBERT' FIRST_NAME , 'C' MIDDLE_NAME FROM DUAL UNION ALL
SELECT 47540310 ID , 'WO' LAST_NAME , 'ROBERT' FIRST_NAME , 'W' MIDDLE_NAME FROM DUAL UNION ALL
SELECT 47540310 ID , 'WO' LAST_NAME , 'ROBERT' FIRST_NAME , 'X' MIDDLE_NAME FROM DUAL UNION ALL
/* Scenario2 NULL can be equal to any value if there is only one value to equate with
In the below case we have two values that can equate with null so assign three diffrent ids */
SELECT 47540300 ID , 'AMATUZIO' LAST_NAME , 'ALBERT' FIRST_NAME , 'J' MIDDLE_NAME FROM DUAL UNION ALL
SELECT 47540300 ID , 'AMATUZIO' LAST_NAME , 'ALBERT' FIRST_NAME , NULL MIDDLE_NAME FROM DUAL UNION ALL
SELECT 47540300 ID , 'AMATUZIO' LAST_NAME , 'ALBERT' FIRST_NAME , 'L' MIDDLE_NAME FROM DUAL UNION ALL
/* Scenario3 NULL can be equal to any value if there is only one value to equate with
In the below case we have ONE VALUE that can equate with null so DONT ASSIGN ANY IDS*/
SELECT 17540300 ID , 'AMARONE' LAST_NAME , 'JOSEPH' FIRST_NAME , 'J' MIDDLE_NAME FROM DUAL UNION ALL
SELECT 17540300 ID , 'AMARONE' LAST_NAME , 'JOSEPH' FIRST_NAME , NULL MIDDLE_NAME FROM DUAL
Select * from names
o/P Required
ID LAST_NAME FIRST_NAME MIDDLE_NAME
47540310 WO ROBERT C
99999990 WO ROBERT W -- New Sequence Number
99999991 WO ROBERT X -- New Sequence Number
47540300 AMATUZIO ALBERT J
99999992 AMATUZIO ALBERT -- New Sequence Number
99999993 AMATUZIO ALBERT L -- New Sequence Number
17540300 AMARONE JOSEPH J
17540300 AMARONE JOSEPH Thanks
Edited by: new learner on Jun 7, 2012 2:12 PMI don't understand what this line is doing:
FIRST_VALUE (fn_get_person_id) -- sequence for the functionI have the impression that the only difference with my query is to select distinct values not to consider duplicates. Correct me if I'm wrong.
To me this one should give the same result as your query:
WITH NAMES AS ( /* Scenario1 -- Three dirrerent people so assign Three diffrrent ID, keeping 1 id as is and assign two
new ids from sequence*/
SELECT 47540310 ID,
'WO' LAST_NAME,
'ROBERT' FIRST_NAME,
'C' MIDDLE_NAME
FROM DUAL
UNION ALL
SELECT 47540310 ID,
'WO' LAST_NAME,
'ROBERT' FIRST_NAME,
'C' MIDDLE_NAME
FROM DUAL
UNION ALL
SELECT 47540310 ID,
'WO' LAST_NAME,
'ROBERT' FIRST_NAME,
'W' MIDDLE_NAME
FROM DUAL
UNION ALL
SELECT 47540310 ID,
'WO' LAST_NAME,
'ROBERT' FIRST_NAME,
'X' MIDDLE_NAME
FROM DUAL
UNION ALL
/* Scenario2 NULL can be equal to any value if there is only one value to equate with
In the below case we have two values that can equate with null so assign three diffrent ids */
SELECT 47540300 ID,
'AMATUZIO' LAST_NAME,
'ALBERT' FIRST_NAME,
'J' MIDDLE_NAME
FROM DUAL
UNION ALL
SELECT 47540300 ID,
'AMATUZIO' LAST_NAME,
'ALBERT' FIRST_NAME,
NULL MIDDLE_NAME
FROM DUAL
UNION ALL
SELECT 47540300 ID,
'AMATUZIO' LAST_NAME,
'ALBERT' FIRST_NAME,
'L' MIDDLE_NAME
FROM DUAL
UNION ALL
/* Scenario3 NULL can be equal to any value if there is only one value to equate with
In the below case we have ONE VALUE that can equate with null so DONT ASSIGN ANY IDS*/
SELECT 17540300 ID,
'AMARONE' LAST_NAME,
'JOSEPH' FIRST_NAME,
'K' MIDDLE_NAME
FROM DUAL
UNION ALL
SELECT 17540300 ID,
'AMARONE' LAST_NAME,
'JOSEPH' FIRST_NAME,
'Y' MIDDLE_NAME
FROM DUAL
UNION ALL
SELECT 17540300 ID,
'AMARONE' LAST_NAME,
'JOSEPH' FIRST_NAME,
NULL MIDDLE_NAME
FROM DUAL
UNION ALL
SELECT 17540300 ID,
'AMARONE' LAST_NAME,
'JOSEPH' FIRST_NAME,
'M' MIDDLE_NAME
FROM DUAL
UNION ALL
SELECT 17540300 ID,
'AMARONE' LAST_NAME,
'JOSEPH' FIRST_NAME,
'M' MIDDLE_NAME
FROM DUAL
UNION ALL
SELECT 99999999 ID,
'LO' LAST_NAME,
'CHRISTY' FIRST_NAME,
NULL MIDDLE_NAME
FROM DUAL
UNION ALL
SELECT 99999999 ID,
'LO' LAST_NAME,
'CHRISTY' FIRST_NAME,
'M' MIDDLE_NAME
FROM DUAL
UNION ALL
SELECT 99999999 ID,
'LO' LAST_NAME,
'CHRISTY' FIRST_NAME,
'M' MIDDLE_NAME
FROM DUAL),
sel_names AS ( SELECT id
, last_name
, first_name
, middle_name
, COUNT (middle_name) OVER (PARTITION BY id ORDER BY middle_name) cnt
, ROW_NUMBER () OVER (PARTITION BY id ORDER BY middle_name) rown
FROM (SELECT DISTINCT * FROM names) -- use SELECT DISTINCT here to remove duplicates
ORDER BY 1, 2, 3, 4
SELECT 8888888 new_id, id, last_name, first_name
, middle_name
FROM sel_names
WHERE cnt > 1 AND rown > 1;As you can see I have only replace the the table with an inline view using SELECT DISTINCT *
FROM (SELECT DISTINCT * FROM names) -- use SELECT DISTINCT here to remove duplicatesFor the new id I have put a dummy value 888888, you may use a function or a sequence according to your needs.
Regards.
Al -
I downloaded two videos from itunes into Media Go and I can't play or transfer them to my Walkman. Please help. I'm new at this and haven't a clue as to what I should do. Is Media Go the wrong place to put the videos? Thanks. Earl G.
I was able to transfer songs, but not the videos. You, too? Earl. G.
-
Security Question - i can not change it - and i have forget the anwser what can i do please help me i'm new in iPhone
There should be a blue link to your rescue e-mail there. If not, you will need to contact iTunes support. See this article: http://support.apple.com/kb/HT5312
-
Support ,
This is Thamer mohammad
,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .
Best wishesThese boards aren't Apple Support; nobody here can reset the questions. Click here, phone Apple, and ask for the Account Security team, or fill out and submit this form.
(90021) -
Install Maps 3.06 on a brand new Nokia 5800
I currently have a 5530, which is a little damaged: the call speaker is not working, the touch screen is quite scratched. Next month I'll be travelling to Europe (Portugal) and maybe I'll buy a brand new Nokia 5800. It's a very good phone and it's price has dropped a lot, but it's still expensive in Brasil, where I live.
Since I'll be on a vacation, I'm not sure whether I'll have free wi-fi available. It would be nice if I could download Ovi Maps 3.06 and the latest Portugal map on my home PC, in order to later install on the new 5800. I have on my current phone, a 5530, many Ovi Maps 3.04 favourites and routes. Those I can easily synchronize on the new 5800 with my Ovi account, that's easy. The problem is how to upgrade a brand new 5800 without having wi-fi (although data plan will not be a problem).
Is that possible? How do I proceed to get the necessary files? How do I install them on a brand new 5800?
Best regards,
Solved!
Go to Solution.@ asperguy,
I finally managed to download the installation file from Ovi Maps support site. But I'm a little confused here...
you said:
Admittedly this is using a Mac but if I use http://europe.nokia.com/support/product-support/maps-support/compatibility-and-download#/nokia-5800-... then hit "Download" I get ovi_maps_installer_3.06_11wk10_b01_s60_5.0_com.sis
Try this instead:5800XM v3.06"
That last link (5800XM v3.06) points to a file named: "ovi_maps_installer_3.06_11wk7_b11_s60_5.0_nocs_beta.sis"
But through Ovi Maps support page I download the file:
"ovi_maps_installer_3.06_11wk10_b01_s60_5.0_com.sis"
Which one is the final release and which one should I install on a factory new 5800XM?
Best regards.
Maybe you are looking for
-
in aperture 1.5x the color is exactly the same as I wanted it and now in Aperture 2 it seems to desaturate everything when it looks perfect on my screen. I am working with D300 raw files. When I open with CS3 and than save to the desktop it looks exa
-
Hi everybody, While I feel the answer to this question may be a negative one, I am curious of any workarounds that may have been implemented in schools. We have Interactive Whiteboards in our classrooms, and we are just starting to hook up a few to A
-
Smartforms Currency decimals 3
Hi, I have a problem with the element KBETR, in vf03 i have 1,769- %. In the table KONV, the field kbetr have 17,69-. How can i convert the field in percentage please? Do you know a data element with currency and decimals 3? when i divide by 10 i hav
-
Date arithmetics inconsistency
My understanding is that the following two statements should produce the same result: select add_months(to_date('2009-03-31', 'YYYY-MM-DD'), -1) from dual; and select to_date('2009-03-31', 'YYYY-MM-DD') - INTERVAL '1' MONTH from dual;Unfortunately th
-
After configuring my office email simple passcode option disabled in iphone how to enable it back
After configuring my Office e-mail in Exchange, simple passocde option got disabled and "Erase data" is enabled? is there any way to change this, if so your advice is much appriecated. Thank you much!