Please Help! :) Accidentally maximized main window (AfterFX) (screen attached)

Hello guys,
i hope someone can help me. I accidentally maximized my after effects application window while working on a project. It must have happened via some kind of shortcut. I was retouching with the stemp tool and somehow managed to maximize the window. Even after restarting the app and windows 7 it doesn't go back to normal.
As you can see there are no minimize/maximize/close buttons at the top. Please help me^^ I am sure it's a newbie problem.
Greetings from Germany
Alex

finally got it back to normal this link helped: http://www.techspot.com/blog/283/windows-7-improved-window-management-using-the-keyboard-h otkeys/
seems like it was a windows hotkey, not one of after effects itself.

Similar Messages

Ok. So my iTunes started acting up a few months ago. ALL of the songs I purchased from the iTunes store stop in the middle of the song and then go back to the begining (I keep it on repeat one song by the way). Please help!!! (Windows 7)

Ok. So my iTunes started acting up a few months ago. ALL of the songs I purchased from the iTunes store stop in the middle of the song and then go back to the begining (I keep it on repeat one song by the way). Please help!!! (Windows 7) I would really like to hear my songs all the way through, but I can't . I tried the "Convert Protected ACC files to Purchased ACC files fix" but it DIDN'T work. I don't know what to do. It does it when I transfer the music onto my Classic too.

What do you mean "doesn't recognize"?

Please help! i keep getting blue screen on my window xp 32 bit

hello everyone,
currently i built a desktop using the following components
CORSAIR DOMINATOR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model TWIN2X4096-8500C5DF
LG 22X DVD±R DVD Burner with LightScribe Black SATA Model GH22LS30
AMD Phenom 9600 Agena 2.3GHz Socket AM2+ 95W Quad-Core Processor Model HD960ZWCGDBOX
XCLIO Windtunnel Fully Black Finish 1.0 mm SECC Chassis ATX Full Tower Computer Case
MSI K9N2 SLI Platinum AM2+/AM2 NVIDIA nForce 750a SLI ATX AMD Motherboard
MSI N9600GT 512M GeForce 9600 GT 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card
CORSAIR CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
Seagate ST3640323AS 640GB 7200 RPM SATA 3.0Gb/s Hard Drive
my desktop was fine until i i did all the updates for my window xp (32 bit) and install AVG anti virus 8.0. everytime i get into window, it show me a blue screen and telingl me the system crash. can someone please help me out. thank you

Quote
TWIN2X4096-8500C5DF
Those are factory overclocked DDR2-800 modules, not real DDR2-1066 sticks. Test them at their native JEDEC-Standard DDR2-800 settings (DDR2-800 @5-5-5-18 @1.8V +/- 0.1V) and see if you are still getting BSODs.

Please help, I am running Windows 7 Home Premium and have problems with loading FLASH Player

Everytime I attempt to load Adobe Flash Player, it says it is installing but then I get a screen that say, must close Internet Explorer, which I do, then the down load continues. It eventually takes me to a window that is for Adobe Photoshop Elements 11, it loads a trial version and then eventually it says Flash Player successfully Installed.
When I go to open a web video, it says, you must have Flash Player installed to view this video. Which when i click on the Adobe download link, it takes me back through the same loop with the same results. Seaching in my programs it does not show Adobe Flash Player loaded, only the 32 bit version, which I am still unable to view web videos with>>>>
What is going on here? Do I need to download something additional to correctly install Adobe Flash Player? Please Help, Thanks in advance for your response and recommendations!
Dan

Thanks for reply... But when i am trying clean install of windows 8pro 64 it says dat u can only upgrade it from the previous versions of windows ... As i told that i got an upgrade pack of windows 8pro ... Soo how can i install it directly ???

PLease Help!! Leopard and Blue Screen

I know there is a lot of discussion out there about a blue screen after installing Leopard. Well I had leopard installed and working for a while and then one day i started having issued where iTunes would lock up my MacBook and I would have to restart the MacBook because i could not stop it from "determining gap less playback" It would do it every time i plugged in my iPhone or my iPod. So everything was working great other than the iTunes issue. Then one night while my wife was using the MacBook it turned off on her so she proceeded to turn it back on only to have it boot up to a blue screen. Keep in mind we had been running Leopard for a few months this was not a brand new install. I purchased my MacBook used from a fried who did not provide me with the CD/DVD's to restore the MacBook since he lost them in his move. So I have searched far and wide trying to resolve this issue. I have booted into Single user mode and did the command prompt options...
1. Reboot into single-user mode (hold Cmd-S while booting machine)
2. Follow the directions OSX gives you when you get to the prompt (I think these were them - just type the two commands it tells you to):
fsck -fy /
/sbin/mount -uw /
3. Remove the following files:
rm -rf /Library/Preference Panes/Application Enhancer.prefpane
rm -rf /Library/Frameworks/Application Enhancer.framework
rm -rf /System/Library/SystemConfiguration/Application Enhancer.bundle
rm -rf /Library/Preferences/com.unsanity.ape.plist
4. Exit, to continue booting normally
exit
restart
I have tried to boot the MacBook in safe mode with no luck. I think i have done everything i can. I called Apple support and was told that the MacBook is out of warranty by 408 days. Can i buy the restore CD/DVD? Is there something that I am missing? What am I not doing? Please help me???

Does the Blue Screen happen after the Gray screen with the Apple logo and the spinning gear below it or when you turn on the computer you see the blue screen right away? You can try resetting the PRAM. Turn on the computer while holding the CommandOption+PR. These buttons will reboot your computer manually so let go after you saw the computer restart by itself. You also mentioned that you installed Leopard on your computer. So do you still have the Leopard install disk with you? If you do, boot from that disk. With the Leopard disk inside your optical drive, press the C key while turning it on. Once booted, try do repair the disk permissions and disk in Disk Utility.
Hope this helps.

Please Help! Problems with Windows Vista 32-bit on Boot Camp (Wireless/Etc)

We recently purchased a new aluminum Mac Book (13 inch) with Leopard (10.5.4). I attempted to install Boot Camp and Windows Vista 32-bit. I can successfully alternate between both operating systems with no problems. However, I am having 2 problems:
1) I cannot connect to wireless internet. No connections will even show up when I attempt to connect, its almost as if an adapter hasn't been installed.
2) I cannot set up the trackpad to do right click.
I've read articles everywhere and nothing has helped. Can anybody please help me??? Any support/advice is greatly appreciated. Thanks in advance!
- Pierce

dpierceNKC:
Welcome to the Apple discussions.
It appears that you may not have installed the boot camp drivers. Boot into Windows and insert your Leopard installation disk in the CD/DVD drive. This should automatically begin installation of the necessary drivers. Reboot the computer when instructed and all the hardware should work as designed.
The right click is accomplished by placing two fingers on the trackpad and then depressing the trackpad button. This should also work after the drivers are installed as instructed above.
Axel F.

Please help, oracle 8i on windows xp?

Can oracle 8i run on windows xp?
When I tried to run setup, it did abolutely nothing. I can't find any information on oracle's web site about this and the only relevant forum post that I found was by someone that was having the exact same problem, but no one answered him.
Thanks in advance,
Joey

Hi all,
I'm trying to install Oracle 8i on Windows-xp
Professional. it gets installed but runs only once.
that means its fails to run once I shut down the
system and restart & shows the message-"oracle not
found" or "tns server is not found". Can anybody
please help me? Thanks in advance.When attempting to install obsolete software on modern operating systems, one must expect problems. I've found that Oracle tends to survive well when installed on a supported platform which is upgraded, but there are usually issues when attempting a fresh install on a newer platform.
Your problem states "Oracle Not Found". Therefore your OS services know that they should be attempting to connect to an Oracle database but the database is 'not found'. Further, it says that the TNS Server is not found. TNS is Oracle's term for 'on the network'.
Is there a business reason that requires you to run obsolete software? If the database software MUST be obsolete, what is the logic behind upgrading the operating system? (In other words - why only upgrade one?)
You need to check the following things:
1) You have a static IP address and host name, and are NOT using DHCP;
(look at or post the result of command line "ipconfig /all")
2) Check whether the Oracle database service and the listener service are running;
(Under "Start > Settings > Control Panel > Administration Tools > Service" or command line services.msc)
3) Tell us how well the listener is running;
(Command line "lsnrctl status")

PLEASE HELP. I have Windows 7 on my laptop and I am using firefox 11. Firefox has been doing good since I downloaded it but not as of today.

Firefox is running very slow and keep's saying not responding for 3 seconds and then does it again repeatedly. Please even when I type words and letters from firefox it types very slow and what I am typing has to catch up with the last thing I typed. It has been doing good ever since I downloaded it but now it sucks bad, not very happy with firefox now. I have windows 7 on my laptop and I have firefox 11....PLEASE HELP Thank you

Another standard diagnostic step is to try Firefox's Safe Mode to see whether it is caused by a custom setting or add-on.
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in [http://support.mozilla.org/kb/Safe+Mode Safe Mode] using
Help > Restart with Add-ons Disabled
In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
Does Firefox behave any better?

Please help.. after May Windows Updates no sound from rear speake

Hello!?My rear channels stopped working, I am thinking it might have happened because of the recent windows update. I have Audigy2 ZS Platinum Card and Logitech 5. speakers. Please help, I tried drivers from CD and the one on the website, no luck

I doubt if the recent windows updates has anything to do with your rear speakers. I have all the recent updates and my speakers are working fine. you could go the Add/Remove program and uninstall the updates. Then you would know for sure if that caused the problem.
Dell XPS 600 Intel Pent D 830 3.0ghz
Chipset- Nvidia nForce4 SLI Intel Edition
WD 60gb HD
2gb Ram
DVD-ROM
DVD-RW (Plextor 760A)
Creative XF-I Extreme Music
Logitech X-540 speakers
EVGA 7950GT
Dell 2007WFP (I-SPS panel)
Win XP SP2
BIOS A

I have windows Vista and can't download itunes 10.PLEASE HELP!, I have windows Vista and can't download itunes 10.PLEASE HELP!

I have windows Vista and can't download itunes 10.PLEASE HELP!

I also have a 32 bit system. Is it not compatible for that?

Please help: Z-Func.mod n Z-procedure attached to view

The transport request created by functional person shows the procedure(Z procedure) under the view (which is attached by him). But I am neither able to find the procedure name(Z procedure) or functional module(Z func. mod.) name listed in the view.
View name: /SAPSLL/V_TICSSN
/SAPSLL/TICSSN
System: GTS
Please confirm if i should be able to see a Z entry in the view too.
Please help.
Thanks.

The TR is already created with both the view and the Z procedure assigned to it(by some other functional person). It can be seen in se09. But I am not able to see the Z procedure or the Z function module entry in the standard view in se11 to which he is assigned.

I clicked on Full Screen under options and now I cannot get it to return to the regular screen. Please help. I have Windows 7, Acer Laptop Aspire.

Under original start up screen with Firefox in orange at the top, I clicked on options and clicked on Full Screen. Now I cannot get it to return to the original state. What do I do? Thank You.

What happens if you press the F11 key?

Please help!!! first green screen, now "itunes has stopped working"

Hi, please, anyone - I need help
I have a dell laptop running windows Vista
about 2 days ago, all of a sudden itunes refused to play my TV shows (which I have a lot of, probabely about $500 worth!). At first it just displayed either a green screen, or a black screen, and then it came up with an error message saying "Itunes has stopped working"
So, I thought ha! I'll simply re-install the operating system. At first that did the job, but now its happening all over again! its the exact same thing
Could someone please offer me some advice, I have tried changing Quicktime to the safe mode - but to no avail, I just dont know what to do!
Cheers in advance for your help
P.S Do you have these problems with Mac's?

I too have this problem and posted the following elsewhere--still no help from anyone. Thankfully I only bought 1 tv show from them and it will be my last until something or someone gives.
Hope someone either can help or refer me to a past posting of someone else having this same problem.
Why am I seeing the color green instead of the tv show I purchased? What most likely is missing on a person's computer when someone sees a green screen? Sound is fine, but the picture is a solid green screen.
I have an S3 Savage Pro 32MB AGP Video component.
Help! Thank you...oomgowah

Please help, cannot compare images in full screen mode

I am not able to compare 2 images in full screen mode. I am using a MBP and a ACD 23". The main image will remain in the ACD while the image being compare is being shown in the MBP.
I am able to compare images in the viewer mode.
My main display is the ACD 23 which I selected using the display preferences under 'Arrangement' with the menu bar located on the ACD. In Aperture, Secondary Viewer is set to Blank.
I had also tried different combinations of Main Viewer and Secondary Viewer settings but was not successful.
Am I missing something? Anyone have the solution?Thanks in advance for any help.
norheng

Anyone have any suggestions to using Aperture to edit images using a MBP and ACD so that it best utilize Aperture full screen mode in comparing and narrowing down to the pick.
I am now trying to use the MBP as the main display and ACD as the secondary. This way I am able to compare images with the MBP in the Browser mode and the ACD display the compare images full screen. It work with the secondary display - ACD set to mirror, span and alternate mode.
It would be best if only one screen is use and hence save energy consumption (reducing global warming and bill, if it help).
Thanks in advance for any suggestions or and solutions.
norheng

Please help, programs crash with Windows XP

I have this card: "KT6 Delta-FIS2R"
I have installed to different XP installs... Same problem(I have not tryed any other OS yet...)
When I run programs like putty.exe, Windows Media Player etc.. it comes up just an error(Please tell microsoft about this problem etc...)
Can somone help me?

Please give us complete PC specs. includding power source brand and Amps. it gives to 3.3v. 5v. and 12v., and changes you had make in Bios setup.

Please Help! :) Accidentally maximized main window (AfterFX) (screen attached)

Similar Messages

Maybe you are looking for