Please help AMD ATHLON XP W/ KT4 MS6590 CANNOT INSTALL WINDOWS 98/ME/X

Hello all
I just built my system 2 days ago and I still cannot install any version of windows. everytime I try to install windows 98/ME or Xp I get errors. The computer boots fine and doesnt freeze up or anything like that and i changed the FSb to 133mhz so it registers as AMD ATHLON XP 2000.
my system is as follows
KT4 MS6590 (the version that comes w/ the 5.1 dolby digital bracket.
AMD ATHLON XP 2000
256 MB DDR pc 2700 ram
48x CD rom
ATI RAdeon 9000 128 MB Oem video card
Enermax CS3051L alum/acrylic 350watt neon case
15 gb maxtor HDD
I am using an old hard drive but it works fine in the other p3 system.
My case is one of those designer enermax ones that have the blue neon installed inside
Includeing the cpu fan I have got 4 installed all together.
I am useing the optimal settings
I have no clue what to do next.
any help or suggestions would be greatly appreciated

Thanks for replying.
I tried for 2 days with default settings and all the different types of settings i can think of in the bios.
Finally i disabled all the caching options , disabled apic and windows xp was able to install but took me almost 4 hours to install :( .
the problem is i think i have bad RAMS I also changed the ram which is pc 2700 ddr from 333 mhz to 266 mhz. Before i was getting some module erros as well as some setup errors. I read that bad rams can cause these erros.
I would like to know my 256 MB pc 2700 DDR running at 266 mhz . how much percentage of system speed am I loseing?
Also is flashing the bios from diskette a bad thing and can ruin the board and also regarding the beta bios . has there been any mishaps from anyone using it.
I like this motherboard but i got to admit its a pain in the ass. esp with all the configurations there is to do. some of them i am not even too sure if i should be using them or not. I am also afraid to touch them bc my system might become unstable and unreliable.
also is there an led on the motherboard for the kt4 ms 6590 I dont see any. This is my first time building a system and setting it up myself. so any help is appreciated

Similar Messages

Cannot install windows, starting to get really pissed off with this PLEASE HELP

ok, i'm starting to get agitated with this.
i cannot install windows XP, 2003, OR Longhorn on my machine.
right now, i have the following setup:
msi 865pe neo2 motherboard
intel p4 3.2ghz w/HT (factory HS/Fan currently)
1 dimm of PC3200 crucial DDR400
30GB maxtor HD plugged into primary IDE
pioneer dvd/cd drive as sencondary IDE
alps 3.5" floppy drive
antec true blue 480wt PSU
i do the following:
format with maxtor cd
boot from OS cd
start setup, reboot, continue
the farthest i can get is 'registering components/completing installation' i either get a blue screen stop error which isnt the same everytime, or it just locks up and doesnt do anything.
ran the memtest checker and get errors on test #4
i had a DIMM of kingston that gave the same errors, so i RMA'd it and got another. same errors, so i RMA'd again and got a Crucial stick. same errors.
so i RMA'd the motherboard since i figured it had to be that. and it improved from the problems i had earlier. (the problems i had before were worse before.)
below are my BIOS settings. SOMEONE WHO KNOWS PLEASE HELP ME!
advanced bios features:
quick boot - enabled
boot order - floppy, cd, HDD
full logo - disabled
s.m.a.r.t - enabled
num-lock on boot - enabled
floppy swap - disabled
floppy seek - enabled
save rom to HD - no
boot to os/2 - no
hyper threading - disabled
mps revision - 1.4
apic acpi sci irq - disabled
cpu l1 & l2 cache - enabled
bios cacheable - disabled
c000, 32k shadow - disabled
advanced chipset:
dram timing...
configure by spd - enabled
(i dont know what to set timing to, nothing anyone has since said helps)
integrated perfs:
usb controller - enabled (same errors if its disabled too so its not USB)
usb device legacy support - disabled
on chip IDE:
operate mode - legacy mode
ata config - pata only
sata keep enabled - yes (for sata drive i have, error either way)
pata channel selection - both
onboard ethernet, 1394, prmoise ide and audio all DISABLED
pc healt status:
cpu - 49°C/120°F (idle sitting in bios)
system temp - 28°C/82ºF
cpu fan - 2678rpm
nb fan speed - 6490rpm
vcore - 1.456 up to 1.502
3.3v - 3.232v
+5.0v - 5.003v
+12v - 11.680v
-12v - -11.743v
-5.0v - -4.826v
battery - 2.896v
+5V SB - 4.945
freq/voltage control
Dynamic OC - disabled
cpu ratio locked
dram freq - auto
spread spectrum - enabled
cpu bus clock - 200
ddr clock (grayed out) - 400
adjust agp/pci - 66.66/33.33
cpu vcore adjust - no
cpu vcore (grayed out) - 1.5500v
ddr power voltage - 2.65v
agp power voltage - 1.50v
SOMEONE PLEASE HELP ME!!!!!
i'm running out of time, money, patience.
if it cant be solved i'm going to set myself on fire!

Quote
Originally posted by REILLY875
Do NOT try the 250 Watt PSU!!, As "Wonk" said if you happen to Blow it, the PSU will most likely Take out the Mo-Bo with it! And maybe the CPU to, due to the Voltage Spike you would get ...I would not put to much Credence into the fact that as of now the +12V and the +3.3V Rails are reading a little low,(I say this because it is indeed a ANTEC), as this could be the Monitoring Hardware, or the Software that might be reading wrong....If I where you I would First set the Memory Timings Manually to 3-4-4-7-8, And up the DRAM (VDIMM) Voltage to 2.7 Volts, and if it still wont Load, I would Definitly try a different DIMM Slot, and Rince and Repeat .....If you dont mind me asking , Why are you running with just 1 Module?....Is it on purpose or are you saving up for More?................Sean REILLY875
yea, i dont plan to run the 250. im gonna wait for the new 480.
thanks for the info about ram timings as well. i havnt gotten any solid answers about what to set it to.
even with new mobo and ram, i'm getting errors in memtest86 #4 test as i always have. i've tried different slots with same problems.
i only have one module because i dont want to waste anymore money on a non-working system. once i get it up and running i'll add another 512.

Lightroom 4.4 keeps crashing saying "Lightroom encountered an error when reading from its preview cache and needs to quit" please help. I've tried reinstalling it and everything Windows 8.1

Lightroom 4.4 keeps crashing saying "Lightroom encountered an error when reading from its preview cache and needs to quit" please help. I've tried reinstalling it and everything Windows 8.1

I assume you know where your catalogue file (the lrcat file) is located. In the same folder is a previews lrdata folder which you should delete or rename in Explorer, then start LR again.
If I've made incorrect assumptions above, sorry, and we'll go back over it from the start.
John

Please help.. I have just tried to install lion on my iMac and it can't complete because of 'disk error'.. can i delete lion and go back to leopard as there was no problem there?? can't get past grey screen

Please help.. I have just tried to install lion on my iMac and it can't complete because of 'disk error'.. can i delete lion and go back to leopard as there was no problem there?? can't get past grey screen

Just restore your bootable backup/clone or Time Machine backup.

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.
Have tried all tricks found on the net and followed every advice from apple support.
Still black screen with blinking curser when mini is rebooting following partitioning via bootcamp.
Very nice and fast mashine, wouldnt like to return it.
thanks allan

Is that an Apple SSD?
what model is it?
Is there a firmware update if non Apple?
Lion is not server version.
Windows is ? ISO or retail?
Google macmini Windows 7 SSD Apple Boot Camp

TS3074 im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

Try the following user tip:
" ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows

Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

Please help me to format my laptop hp pavilion dv6 Windows 7 Home premium 64 bit?

Please help me to format my laptop hp pavilion dv6 Windows 7 Home premium 64 bit?

Hi,
There are Three main ways to restore your notebook to format your HDD and return the notebook to its 'Factory Condition' - see the document on the link below.
Performing An HP System Recovery - Windows 7.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My computer crashed before i was able to deactivate my Visual Communicator 3 software. Please help! I have my disc, but cannot activate my software again. I have several projects that I cannot access. Please help!

My computer crashed before I was able to deactivate my Visual Communicator 3 software. Please help! I have my disc, but cannot activate my program again. I have projects that I cannot access. Please help!

I wish I could help, but I am in a similar situation.
I need to deactivate it because we are getting rid of the computer it is on and are buying a new one. When I go to Help there is no Deactivate option. The only options are: "Help", "Hide Coach", "Tip of the Day", "Adobe Website", "Technical Support Website", "Frequently Asked Questions", "Check for Updates", "Register", "Download e-License..." (Greyed out), "Return e-License..." (Greyed out) and "About Adobe Visual Communicator 3". I spoke with support through chat and they said my product was no longer supported.
Patrick

I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 cont...

I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 ULTIMATE then after the exctraction of files and everything the windows setup came and my mouse and keyboard stopped working and i dont know how to open mac os x there is no option anywhere?? what shall i do pls help!!!!if there are any keyboard shortcut key to open mac os x or boot camp pls mention.

For Boot Camp issues please repost in the Boot Camp forum located by clicking Boot Camp

Please help! i keep getting blue screen on my window xp 32 bit

hello everyone,
currently i built a desktop using the following components
CORSAIR DOMINATOR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model TWIN2X4096-8500C5DF
LG 22X DVD±R DVD Burner with LightScribe Black SATA Model GH22LS30
AMD Phenom 9600 Agena 2.3GHz Socket AM2+ 95W Quad-Core Processor Model HD960ZWCGDBOX
XCLIO Windtunnel Fully Black Finish 1.0 mm SECC Chassis ATX Full Tower Computer Case
MSI K9N2 SLI Platinum AM2+/AM2 NVIDIA nForce 750a SLI ATX AMD Motherboard
MSI N9600GT 512M GeForce 9600 GT 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card
CORSAIR CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
Seagate ST3640323AS 640GB 7200 RPM SATA 3.0Gb/s Hard Drive
my desktop was fine until i i did all the updates for my window xp (32 bit) and install AVG anti virus 8.0. everytime i get into window, it show me a blue screen and telingl me the system crash. can someone please help me out. thank you

Quote
TWIN2X4096-8500C5DF
Those are factory overclocked DDR2-800 modules, not real DDR2-1066 sticks. Test them at their native JEDEC-Standard DDR2-800 settings (DDR2-800 @5-5-5-18 @1.8V +/- 0.1V) and see if you are still getting BSODs.

Please help, I am trying to download itunes onto my windows 7 32bit desktop, but keeps coming up with error message:This installation package could not be opened. Verify that the package exists. Any ideas on what im doing wrong

Please help
I am trying to download itunes on windows 7 32 bit, everytime I go to open download it comes up with a green screen then a error message.
This installation package could not be opened. Verify that the package exist.
Please help Me

Hi gump68,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful if iTunes is not installing on your PC:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
All the best,
Jeremy

HT202159 An error occurred in the App Store. Try again later(13)..I wait for months!!! please help me! Can't download or update, install and buy! iMac 2008, OS X Lion 10.7.4 (11E53).

An error occurred in the App Store. Try again later(13)
Can't download or update, install and buy!
I wait for months!!! please help me!
<Email Edited by Host>

Disable anti virus software.
Turn off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall
If that doesn't help, open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Caches/com.apple.appstore/Cache.db
Click Go
Move the Cache.db file to the Trash.
Now here:
~/Library/Preferences
Click Go
Move these files from the Preferences folder to the Trash.
com.apple.appstore.plist
com.apple.storeagent.pllist
Now here:
~/Library/Cookies
Click Go
Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Empty the Trash, try the App Store.

CAN SOMEONE PLEASE HELP ME REMOVE ITUNES SO I CAN RE INSTALL IT!

How Can I Remove and Unistall Itunes From My Computer I Went To "Add or Remove Programs" and Clicked Itunes "Change/Remove" and nothing happen! its still there same thing for quicktime and im trying to unistalled them because i dont have any were in my computer to click itunes to open! so its like i dont even have it but i cant download it till i remove that one on the add or remove program section but i cant because nothing happens CAN SOMEONE PLEASE HELP ME REMOVE ITUNES! FROM THAT LIST!

Well, you can do what I did. You can click onto "Start" and then "My Computer". From there, click onto Hard Disc Drive "C". A window will open that shows the folders that are present. Click onto "Program Files" and then another window will open. You should see both I-Tunes and Quicktime there. Right click onto each one and then click "Delete". That should work. When it's done, restart your computer.
If it doesn't work, hit the "control/alt/delete" keys at the same time and select "Processes". If they show up there, delete them from that list first and then repeat the above procedure.
Good luck. By the way, check out my post on "People with Problems, Read here". You'll find that there's many of us here that cannot make our I-Pod's work correctly because the software for them is HORRIBLE!

Please help me, I can't upload my printer on Windows 7

Can you please help me to upload my printer on Windows 7, my CD don't load, tell me that it can't load with Window's 7

Please can you help me to install my printer on the Computer. I have a new computer with 64 bit and windows 7. I want to install the F380 all in one. But it says I don't have the support for it and it won't install. What should I do?

Please help AMD ATHLON XP W/ KT4 MS6590 CANNOT INSTALL WINDOWS 98/ME/X

Similar Messages

Maybe you are looking for