Please help answer this for me
I have returned 3 iPods now, because it appeared that they all had stuck pixels (white, only visible in dark on black background). These white dots are VERY VERY small and I cannot see them unless the screen is black and I am in a dark room. Also, I can't always see them. I have to tilt the screen around and I only see them at certain angles and then they disappear when titled another way. If they were stuck pixels, shouldnlt I see them all the time?? I read a post about these white specks possibly being dust particles on the scrren and that it is common. I also read that it could be the backlight leaking through at a certain angle. The latter two explanations are starting to sound like possibilites but I juts want to be sure I donl;t have a stuck pixel on the screen. Would a stuck white pixel be stuck on all the time and you could see it from at all angles?? The genius at the Apple sotre said he can't see a stuxk pixel on my screen at all.
I do not mean to be rude but are you sure that you really have a problem?
By your own admission you have to go out of your way to see the "problem" which, even then you cannot always find.
I respectfully suggest that you stop hiding in darkened rooms and start ENJOYING using your iPod - that's why you (presumably) bought it.
Paul.
Similar Messages
-
Emergency! Please help answer this now: will an imac (MB323LL/A) run FCP..
Arg, Disaster, I am in the middle of a huge project using an MBP, FCP, Motion, and FxFactory plugs and then this happens:
http://discussions.apple.com/thread.jspa?messageID=7659939#7659939
But a dealer here in the remote hinterlands has this in stock:
a 20-inch iMac (MB323LL/A) which only has 128 ATI video memory
but if Motion and FCP will load i gotta get it today or my butt is cooked. Well, let me know....I guess the ansqwer is no then:
Color-Specific Requirements
* The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad.
* For 32-bit rendering: a graphics card with at least 256MB of VRAM.
* A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.
* A three-button mouse for full functionality
But the strange thing is this:
When I had the first disaster with that MBP I was on the road next to an apple store in bangkok. the logic board was going to take 1 week to get replaced and i had a time machine backup of the box with me, so i bought a new mb for the wife and installed the mbp backup onto the mp to get some work done that week. the amazing thing was that the little intel graphics chip worked with everthing i had loaded at the time, fcp motion c4d poser etc. but then again i did not do any production work. it seems like the imac 20" would perform even better then that, albiet i had 4gig in the mb at the time. so still confused, but gotta get something soon or i loose a client.... -
search criteria is not working in Responsible Group field in sap crm could you please help me this how to achieve.I have writen code on EH_ONSEARCH .as per below...what changess i need to do..and through partner function and adding the selection params please send the sample .
code. partner funtction - ZRG DATA :
DATA : lv_partner_fct type .
types: begin of ty_resp,
partner type but000-partner,
name_last type but000-name_last,
name_first type but000-name_first,
mc_name1 type but000-mc_name1,
mc_name2 type but000-mc_name2,
end of ty_resp.
DATA: lv_resp_bp type STANDARD TABLE OF ty_resp INITIAL SIZE 0,
lw_resp_bp type ty_resp.
IF lv_attr_name = 'Rgroup'.
lr_entity->get_property_as_value( EXPORTING iv_attr_name = if_crm_srqm_uiu_const=>gc_attr_low
IMPORTING ev_result = lv_low ).
IF lv_low IS INITIAL.
SELECT partner
name_last
name_first
mc_name1
mc_name2
FROM but000 INTO table lv_resp_bp
WHERE mc_name2 = lv_low and bu_group = '0010'.
loop at lv_resp_bp into lw_resp_bp.
lv_low = lw_resp_bp-mc_name2.
lr_query_service2->add_selection_param( iv_attr_name = 'Rgroup'
iv_sign = lv_sign
iv_option = lv_option
iv_low = lv_low
iv_high = lv_high ).
ENDLOOP.
if lv_partner_fct = 'ZRG'.
lr_entity = lr_iterator->get_next( ).
CONTINUE.
ENDIF.
lv_attr_name = 'BU_PARTNER'.
ENDIF.<b>You can acheive this .... first by creating the search help exit ... by creating the maintaince view then using it in the Creation of the search help </b> ...
see the link for attaching the view to the serach help .
<a href="http://">http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_elementary.htm</a>
reward points if it is usefull...
Girish -
I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.
So just to be clear, when you say "just bought" how long ago was that? Is it on this new iPhone that you had pictures, texts, etc that you want? Were you backing up to iCloud or onto iTunes?
This may not help for everything but if you go to iCloud.com and log in, are you able to find your pictures there? -
I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures and that I need to in order to purchase it, even though I did and have checked multiple times. Please help, it's for Mother's Day.
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN -
Trying to update photoshop and repeatedly get error code U44M1P7, can you please help resolve this?
JJMack, Thanks for the info. Let this old man digest it and see if I can put the info into action. I'll give you a feedback. Thanks for your help in this matter. I am not a tech savvy person.
Rueben Rueben D. Olivas Home Ph: 1-671-969-2452
Cell Ph: 1-671-747-2453La Luz Photography
Email: [email protected]/Guam Firehouse Cook: http://guamfirehousecook.blogspot.com/BBQGuam: http://bbqguam.blogspot.com/My Photostream: http://ruebenolivas.megashot.net/photostream -
My Canon MP620 appears to be connected, yet every time I try to print something, it says error. I have tried to unplug and track the error, but I cannot figure out why. Please help! this is such an inconvenience!
What Mac model? What Mac OS version?
FYI, this forum is for Apple hardware made before 1999. -
Hi. i updated my iphone 4s to iOS 7.0.4 but after that, wifi is not enabled. please help in this regard.
Apple has provided a useless workaround... [http://support.apple.com/kb/ts1559]
Else the only option you have is to fight with the Apple Store "geniuses" to get a free replacement for out of warranty 4S devices. Or try a third party repair like iFixit. The wifi chip might cost you 60-80$ but it is better than paying Apple 200$.
Overheating is the culprit in 4S devices. And its been getting worse with ever successive iOS 7 update. I think 7.0.4 was the final nail in the coffin.
They are not getting my money anymore.. I've had iPhones every since they launched... but no more. Feels like a dead investment after facing this issue. I can never sell my iPhone 4S even if I want to. There have been cases where users just sold their 4S devices, the new owner updated to 7.0.4, wifi stopped working and the seller had to give a refund.
I'm basically sitting on a 650$ white brick. Hmm... I wonder if white bricks sell higher than the standard red bricks
Guess it's time for you to sign up this ongoing campaign [https://www.change.org/petitions/apple-to-get-apple-to-replace-all-units-affecte d-negatively-by-the-update-of-ios7-or-patch-an-update-that-will-remedy-the-issue s-many-loyal-customers-are-experiencing#share]
TBH, I can't get a replacement because I am in India where 4S was never launched as an unlocked device and there are no Apple retail stores. Only resellers here like Vodafone/Reliance/Airtel. But if this petition can help the one who can take advantage of having retail stores around... why not? Sign up please. Thank You. -
My macbook Pro 13" 2013 has a mouse problem, its not moving naturally, and keeps on moving around like its dancing. Please help solve this!!
Go step by step and test.
1. Restart
2. Shut down the computer.
Clean the trackpad with moist not wet microfiber cloth.
System Preferences > Point & Click
Try turning off three finger dragging and then turning it on after testing.
3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
4. Reset PRAM: http://support.apple.com/kb/PH14222
5. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
6. Close all windows and quit all applications.
Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
Select Disk Utility from the drop down. When the Disk utility window opens up,
select Macintosh HD, then First Aid.
Click Repair Disk Permissions button.
Ignore the time remaining estimate.
Last 1 minute may take longer. -
Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.
Hello Priyanks,
I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Dear Friends,
With the help of this program I am trying to connect two instruments (One is CM110 monochromator of Spectral products and another one is from Keithley 2400 source meter) with the same programs. With the help of this program I am trying to increase the wavelength of the monochromator by say 10 nm and want to read the current at applied source meter voltage.
But the problem is each execution of while loop it is keeping ON/OFF the souce meter applied voltage . I want to keep the applied source meter voltage on through out the whole while loop and read the current, but I am not able to do so.
Please help me. For your further information I am attaching the LabVIEW Program.
Thanks in anticipation
Regards
Upendra Pandey
Attachments:
p2_for_1.vi 25 KBChemical,
You may want to try initializing and closing the Keithley outside of the main loop. Regards, -SS -
My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?
Following the fix here worked for me:
https://discussions.apple.com/message/15680566#15680566
except my plist file was in ~/Library instead of /Library.
-Scott -
I'll ask again... please, someone answer this time.
Ever since I installed a new multimedia keyboard, my iTunes SOUND hasn't been working. But the sound in any other program works fine, so I know it's iTunes and not my computer. I've tried reinstalling iTunes, etc.
Please help, as this is really annoying and I am really frustrated.Janie, Welcome to Apple Discussions. Please be patient.
This is a user to user discussion. Solving your problem requires that another user has experienced your problem and/or knows how to solve it.
Apple staff do not respond to messages here.
You have posted your question in the "Using iPod" discussion. Your problem relates to iTunes for Windows and possibly, to your new keyboard.
Please post your question in the "iTunes for Windows" discussion.
http://discussions.info.apple.com/webx?14@@.68a50588 -
When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.
Me too. I try to verify and i get the same message.
I've created 3 alternate e-mail addresses and tried creating new accounts.
Same Result!
This is bullsh!t. How the **** can all 4 of my attempts result in the same freakin error??? -
Every time I sync my Iphone 5c(with ios 8) to Itunes, it 1. deletes all of my purchased music 2. deletes all of my album artwork 3. replaces all of my deleted songs. please help! this is driving me crazy! It syncs 100+ songs, when I only want to sync 1! I'm running Itunes 11.3.1.2
After having experienced similar problems and having it back to work, I have a few suggestions:
- Try to find out if the syncing stops at a particular track or song. That might - out of the blue - have gotten corrupted in one way or another. Since that song will not be on the iPod, iTunes will try over and over to put it on and crash in one way or another;
- reformat the iPod as described in the iTunes 9 crash-thread. It takes time (at first it seems to do nothing, but that is because the green bar is moving with very small steps);
HTH
Maybe you are looking for
-
I cannot save a photo on my new iPad (from Path) to iPhoto. The phot appears to download but then does not appear in iPhoto. I can perform the same task with my old iPad. I can also save an emailed photo to iPhoto. Thanks
-
I have had Firefox on my Vista OS desktop for some time. When I start Firefox it opens Google as my home page. However, today I was not able to have anything open when typed into the Google search bar. Thinking it might be a Google problem I opened u
-
I imported video from my newly bought HD video camcorder and was wondering if anyone out there knew how to make a time lapse from the video, as in speed up or down the time in which the video was taken. Just wondering if there is a way to do this in
-
Oracle Apps 11i Performance Benchmarks
Hi, Does anyone knows where to obtain the benchmarks. What is the normal time to load apps, sign in, open forms etc.. thanks, Sam
-
With a cache loader, the Java Object Cache automatically determines if an object needs to be loaded into the cache when the object is request. Can someone tellme how exactly this works. I am trying to get the cache framework to load objects automatic